DELL-RAC-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
12
Rows
12
Columns
198

drsCMCPowerTable

table mandatory
.1.3.6.1.4.1.674.10892.2.4.1 · 1 row entry · 14 columns
Open in standard view 
0004.0001 This object defines the CMC power table.
drsCMCPowerTableEntry entry .1.3.6.1.4.1.674.10892.2.4.1.1
0004.0001.0001 This object defines the CMC power table entry.
Indexes
drsChassisIndex
Column Syntax OID
drsChassisIndex mandatory
0004.0001.0001.0001 This attribute defines the index
(one-based) of the associated chassis.
DellCMCPowerIndexRange
Textual Convention: DellCMCPowerIndexRange Integer32
Type Constraints:
range: 1
 .1.3.6.1.4.1.674.10892.2.4.1.1.1
drsPotentialPower mandatory
0004.0001.0001.0002 This attribute defines the power (in Watts) required by
the chassis infrastructure, plus the sum of the maximum power requirements
for all currently powered-on servers.
DellPowerReading
Textual Convention: DellPowerReading OctetString
Type Constraints:
range: 0..32
 .1.3.6.1.4.1.674.10892.2.4.1.1.2
drsIdlePower mandatory
0004.0001.0001.0003 This attribute defines the power (in Watts) required by
the chassis infrastructure, plus the sum of the minimum power requirements
for all currently powered-on servers.
DellPowerReading
Textual Convention: DellPowerReading OctetString
Type Constraints:
range: 0..32
 .1.3.6.1.4.1.674.10892.2.4.1.1.3
drsMaxPowerSpecification mandatory
0004.0001.0001.0004 This attribute defines the power limit (in Watts)
at which server throttling will take place.
DellPowerReading
Textual Convention: DellPowerReading OctetString
Type Constraints:
range: 0..32
 .1.3.6.1.4.1.674.10892.2.4.1.1.4
drsPowerSurplus mandatory
0004.0001.0001.0005 This attribute defines the power surplus (in Watts)
remaining above the drsPotentialPower reading.
DellPowerReading
Textual Convention: DellPowerReading OctetString
Type Constraints:
range: 0..32
 .1.3.6.1.4.1.674.10892.2.4.1.1.5
drsKWhCumulative mandatory
0004.0001.0001.0006 This attribute defines the cumulative chassis power
usage (in KWh) since last reset.
DellPowerReading
Textual Convention: DellPowerReading OctetString
Type Constraints:
range: 0..32
 .1.3.6.1.4.1.674.10892.2.4.1.1.6
drsKWhCumulativeTime mandatory
0004.0001.0001.0007 This attribute defines the timestamp of the most recent
chassis power accumulator reset.
DellTimestamp
Textual Convention: DellTimestamp OctetString
Type Constraints:
range: 26
 .1.3.6.1.4.1.674.10892.2.4.1.1.7
drsWattsPeakUsage mandatory
0004.0001.0001.0008 This attribute defines the chassis peak power
usage (in Watts) since last reset.
DellPowerReading
Textual Convention: DellPowerReading OctetString
Type Constraints:
range: 0..32
 .1.3.6.1.4.1.674.10892.2.4.1.1.8
drsWattsPeakTime mandatory
0004.0001.0001.0009 This attribute defines the timestamp of the most recent
chassis peak power usage.
DellTimestamp
Textual Convention: DellTimestamp OctetString
Type Constraints:
range: 26
 .1.3.6.1.4.1.674.10892.2.4.1.1.9
drsWattsMinUsage mandatory
0004.0001.0001.0010 This attribute defines the chassis mimimum power
usage (in Watts) since last reset.
DellPowerReading
Textual Convention: DellPowerReading OctetString
Type Constraints:
range: 0..32
 .1.3.6.1.4.1.674.10892.2.4.1.1.10
drsWattsMinTime mandatory
0004.0001.0001.0011 This attribute defines the timestamp of the most recent
chassis minimum power usage.
DellTimestamp
Textual Convention: DellTimestamp OctetString
Type Constraints:
range: 26
 .1.3.6.1.4.1.674.10892.2.4.1.1.11
drsWattsResetTime mandatory
0004.0001.0001.0012 This attribute defines the timestamp of the most recent
reset of the chassis min/peak Watts readings.
DellTimestamp
Textual Convention: DellTimestamp OctetString
Type Constraints:
range: 26
 .1.3.6.1.4.1.674.10892.2.4.1.1.12
drsWattsReading mandatory
0004.0001.0001.0013 This attribute defines the instantaneous chassis power
usage (in Watts).
DellPowerReading
Textual Convention: DellPowerReading OctetString
Type Constraints:
range: 0..32
 .1.3.6.1.4.1.674.10892.2.4.1.1.13
drsAmpsReading mandatory
0004.0001.0001.0014 This attribute defines the instantaneous chassis current
usage (in Watts).
DellPowerReading
Textual Convention: DellPowerReading OctetString
Type Constraints:
range: 0..32
 .1.3.6.1.4.1.674.10892.2.4.1.1.14

drsCMCPSUTable

table mandatory
.1.3.6.1.4.1.674.10892.2.4.2 · 1 row entry · 7 columns
Open in standard view 
0004.0002 This object defines the CMC PSU table.
drsCMCPSUTableEntry entry .1.3.6.1.4.1.674.10892.2.4.2.1
0004.0002.0001 This object defines the CMC PSU table entry.
Indexes
drsPSUChassisIndex drsPSUIndex
Column Syntax OID
drsPSUChassisIndex mandatory
0004.0002.0001.0001 This attribute defines the index
(one-based) of the associated chassis.
DellCMCPowerIndexRange
Textual Convention: DellCMCPowerIndexRange Integer32
Type Constraints:
range: 1
 .1.3.6.1.4.1.674.10892.2.4.2.1.1
drsPSUIndex mandatory
0004.0002.0001.0002 This attribute defines the index
(one-based) of the associated CMC PSU.
DellCMCPSUIndexRange
Textual Convention: DellCMCPSUIndexRange Integer32
Type Constraints:
range: 1..6
 .1.3.6.1.4.1.674.10892.2.4.2.1.2
drsPSULocation mandatory
0004.0002.0001.0003 This attribute defines the location
of the CMC PSU.
DellString
Textual Convention: DellString OctetString
Type Constraints:
range: 0..1023
 .1.3.6.1.4.1.674.10892.2.4.2.1.3
drsPSUMonitoringCapable mandatory
0004.0002.0001.0004 This attribute defines the PSU Monitoring
capabilities, or the absence of a PSU in this location.
DellCMCPSUCapable
Textual Convention: DellCMCPSUCapable Enumeration
Type Values:
1absent
2none
3basic
 .1.3.6.1.4.1.674.10892.2.4.2.1.4
drsPSUVoltsReading mandatory
0004.0002.0001.0005 This attribute defines the instantaneous
PSU Voltage reading.
DellPowerReading
Textual Convention: DellPowerReading OctetString
Type Constraints:
range: 0..32
 .1.3.6.1.4.1.674.10892.2.4.2.1.5
drsPSUAmpsReading mandatory
0004.0002.0001.0006 This attribute defines the instantaneous
PSU Current reading.
DellPowerReading
Textual Convention: DellPowerReading OctetString
Type Constraints:
range: 0..32
 .1.3.6.1.4.1.674.10892.2.4.2.1.6
drsPSUWattsReading mandatory
0004.0002.0001.0007 This attribute defines the instantaneous
PSU Wattage reading.
DellPowerReading
Textual Convention: DellPowerReading OctetString
Type Constraints:
range: 0..32
 .1.3.6.1.4.1.674.10892.2.4.2.1.7

drsCMCServerTable

table mandatory
.1.3.6.1.4.1.674.10892.2.5.1 · 1 row entry · 12 columns
Open in standard view 
0005.0001 This object defines the CMC server table.
drsCMCServerTableEntry entry .1.3.6.1.4.1.674.10892.2.5.1.1
0005.0001.0001 This object defines the CMC server table entry.
Indexes
drsServerIndex
Column Syntax OID
drsServerIndex mandatory
0005.0001.0001.0001 This attribute defines the index
(one-based) of the associated CMC server.
DellCMCServerIndexRange
Textual Convention: DellCMCServerIndexRange Integer32
Type Constraints:
range: 1..32
 .1.3.6.1.4.1.674.10892.2.5.1.1.1
drsServerMonitoringCapable mandatory
0005.0001.0001.0002 This attribute defines the server monitoring
capabilities, or the absence of a server in this location.
DellCMCServerCapable
Textual Convention: DellCMCServerCapable Enumeration
Type Values:
1absent
2none
3basic
4off
 .1.3.6.1.4.1.674.10892.2.5.1.1.2
drsServerServiceTag mandatory
0005.0001.0001.0003 This attribute defines the Service Tag
of the CMC server.
DellString
Textual Convention: DellString OctetString
Type Constraints:
range: 0..1023
 .1.3.6.1.4.1.674.10892.2.5.1.1.3
drsServerSlotName mandatory
0005.0001.0001.0004 This attribute defines the Slot Name
of the CMC server.
DellString
Textual Convention: DellString OctetString
Type Constraints:
range: 0..1023
 .1.3.6.1.4.1.674.10892.2.5.1.1.4
drsServerSlotNumber mandatory
0005.0001.0001.0005 This attribute defines the Chassis
Slot Number of the CMC server.
DellString
Textual Convention: DellString OctetString
Type Constraints:
range: 0..1023
 .1.3.6.1.4.1.674.10892.2.5.1.1.5
drsServerNodeID mandatory
0005.0001.0001.0006 This attribute defines the Node ID
of the CMC server. The Node ID provides a unique identifier
for the server.
DellString
Textual Convention: DellString OctetString
Type Constraints:
range: 0..1023
 .1.3.6.1.4.1.674.10892.2.5.1.1.6
drsServerModel mandatory
0005.0001.0001.0007 This attribute defines the Model
of the CMC server.
DellString
Textual Convention: DellString OctetString
Type Constraints:
range: 0..1023
 .1.3.6.1.4.1.674.10892.2.5.1.1.7
drsServerAssetTag mandatory
0005.0001.0001.0008 This attribute defines the Asset Tag
of the CMC server.
DellString
Textual Convention: DellString OctetString
Type Constraints:
range: 0..1023
 .1.3.6.1.4.1.674.10892.2.5.1.1.8
drsServerNumStorageControllers mandatory
0005.0001.0001.0009 This attribute defines the number of
storage controllers on the storage sled. The value
will be zero if this is not a storage sled.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.674.10892.2.5.1.1.9
drsServerStorageMode mandatory
0005.0001.0001.0010 This attribute defines the Storage
Mode of the storage sled.
DellCMCServerStorageMode
Textual Convention: DellCMCServerStorageMode Enumeration
Type Values:
1notApplicable
2joined
3splitDualHost
4splitSingleHost
99unknown
 .1.3.6.1.4.1.674.10892.2.5.1.1.10
drsServerIntrusionState mandatory
0005.0001.0001.0011 This attribute defines the Intrusion
State of the CMC server if supported by the server.
DellCMCServerIntrusionState
Textual Convention: DellCMCServerIntrusionState Enumeration
Type Values:
1notApplicable
2closed
3open
99unknown
 .1.3.6.1.4.1.674.10892.2.5.1.1.11
drsServerAssignedServerSlots mandatory
0005.0001.0001.0012 This attribute defines the the server
slots to which a storage sled is assigned. If this is
a storage sled that is assigned to one more or more
server slots, the value will be a comma-separated list…
DellString
Textual Convention: DellString OctetString
Type Constraints:
range: 0..1023
 .1.3.6.1.4.1.674.10892.2.5.1.1.12

controllerTable

table mandatory
.1.3.6.1.4.1.674.10892.2.6.1.20.130.1 · 1 row entry · 38 columns
Open in standard view 
A table of managed RAID controllers. The number of entries
is related to number of RAID controllers discovered in the
system. The maximum number of entries is implementation dependent.
Note: The properties in this table may not be applicable to all 
entries.
controllerTableEntry entry .1.3.6.1.4.1.674.10892.2.6.1.20.130.1.1
An entry in the table of RAID controllers. A row in this table
cannot be created or deleted by SNMP operations on columns of
the table.
Indexes
controllerNumber
Column Syntax OID
controllerNumber mandatory
Instance number of this controller entry.
Integer32
Constraints:
range: 1-255
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.1.1.1
controllerName mandatory
The controller's name as represented in Storage Management.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.1.1.2
controllerRebuildRate mandatory
The rebuild rate is the percentage of the controller's
resources dedicated to rebuilding a failed disk when a rebuild
is necessary.
Integer32
Constraints:
range: 0-100
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.1.1.7
controllerFWVersion mandatory
The controller's current firmware version.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.1.1.8
controllerCacheSizeInMB mandatory
The controller's current amount of cache memory in megabytes.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.1.1.9
controllerRollUpStatus mandatory
Severity of the controller state.
This is the combined status of the controller and its components.
Possible values:
1: Other.
2: Unknown.
3: OK
4: Non-critical
5: Critical.
6: Non-recoverable.
ObjectStatusEnum
Textual Convention: ObjectStatusEnum Enumeration
Type Values:
1other
2unknown
3ok
4nonCritical
5critical
6nonRecoverable
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.1.1.37
controllerComponentStatus mandatory
The status of the controller itself without the
propagation of any contained component status.
Possible values:
1: Other
2: Unknown
3: OK
4: Non-critical
5: Critical
6: Non-recoverable
ObjectStatusEnum
Textual Convention: ObjectStatusEnum Enumeration
Type Values:
1other
2unknown
3ok
4nonCritical
5critical
6nonRecoverable
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.1.1.38
controllerDriverVersion mandatory
Currently installed driver version for this controller on the host.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.1.1.41
controllerPCISlot mandatory
The PCI slot on the server where the controller is seated. This
data is not reported for embedded or integrated controllers,
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.1.1.42
controllerReconstructRate mandatory
The reconstruct rate is the percentage of the controller's resources
dedicated to reconstructing a disk group after adding a physical disk
or changing the RAID level of a virtual disk residing on the disk
group.
Integer32
Constraints:
range: 0-100
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.1.1.48
controllerPatrolReadRate mandatory
The patrol read rate is the percentage of the controller's
resources dedicated to perform a patrol read on disks participating
in a virtual disk or hot spares.
Integer32
Constraints:
range: 0-100
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.1.1.49
controllerBGIRate mandatory
The background initialization (BGI) rate is the percentage of the
controller's resources dedicated to performing the background
initialization of a redundant virtual disk after it is created.
Integer32
Constraints:
range: 0-100
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.1.1.50
controllerCheckConsistencyRate mandatory
The check consistency rate is the percentage of the
controller's resources dedicated to performing a check consistency
on a redundant virtual disk.
Integer32
Constraints:
range: 0-100
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.1.1.51
controllerPatrolReadMode mandatory
Identifies the patrol read mode setting for the controller.
Possible values:
1: Not one of the following or could not be determined.
2: Not Supported on this controller.
3: Disabled.
4: Automatic.
5: Manual.
Enumeration
Enumerated Values:
1other
2notSupported
3disabled
4auto
5manual
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.1.1.52
controllerPatrolReadState mandatory
This property displays the current state of the patrol read process.
Possible values:
1: Not one of the following or could not be determined.
2: Patrol read is not running.
3: Patrol read is running.
Enumeration
Enumerated Values:
1other
2stopped
3active
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.1.1.53
controllerPersistentHotSpare mandatory
Indicates whether hot spare drives would be restored on insertion
into the same slot.
BooleanType
Textual Convention: BooleanType Integer32
Type Constraints:
range: 0..1
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.1.1.59
controllerSpinDownUnconfiguredDrives mandatory
Indicates whether un-configured drives would be put in power
save mode by the controller.
BooleanType
Textual Convention: BooleanType Integer32
Type Constraints:
range: 0..1
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.1.1.60
controllerSpinDownHotSpareDrives mandatory
Indicates whether hot spare drives would be put in power
save mode by the controller.
BooleanType
Textual Convention: BooleanType Integer32
Type Constraints:
range: 0..1
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.1.1.61
controllerSpinDownTimeInterval mandatory
The duration in minutes after which, the unconfigured or hot
spare drives will be spun down to power save mode.
Integer32
Constraints:
range: 30-1440
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.1.1.62
controllerPreservedCache mandatory
Indicates whether preserved cache or pinned cache is
present on the controller.
BooleanType
Textual Convention: BooleanType Integer32
Type Constraints:
range: 0..1
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.1.1.69
controllerCheckConsistencyMode mandatory
The current check consistency mode setting
for the controller.
Possible values:
1: Not one of the following.
2: Not supported on this controller.
3: Normal check consistency operation.
4: Check consistency operation wi…
Enumeration
Enumerated Values:
1other
2unsupported
3normal
4stopOnError
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.1.1.70
controllerCopyBackMode mandatory
The current copy back mode setting
for the controller.
Possible values:
1: Not one of the following.
2: Not supported on this controller.
3: Disks assigned as spares could revert back to spare status.
4: Data from phys…
Enumeration
Enumerated Values:
1other
2unsupported
3on
4onWithSmart
5off
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.1.1.71
controllerSecurityStatus mandatory
The controller's current security/encryption status..
Possible values:
1: The current status could not be determined.
2: Controller is not operating in an encryption mode.
3: Controller is operating in the Local Key Man…
Enumeration
Enumerated Values:
1unknown
2none
3lkm
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.1.1.72
controllerEncryptionKeyPresent mandatory
Indicates whether encryption key is assigned for the controller.
BooleanType
Textual Convention: BooleanType Integer32
Type Constraints:
range: 0..1
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.1.1.73
controllerEncryptionCapability mandatory
The type of encryption supported by the controller.
Possible values:
1: Not one of the following.
2: No encryption supported,
3: Local Key Management,
Enumeration
Enumerated Values:
1other
2none
3lkm
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.1.1.74
controllerLoadBalanceSetting mandatory
The ability of the controller to automatically use both
controller ports (or connectors) connected to the same enclosure in
order to route I/O requests.
Possible values:
1: Not one of the following.
2: Not supported.
…
Enumeration
Enumerated Values:
1other
2unsupported
3auto
4none
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.1.1.75
controllerMaxCapSpeed mandatory
The maximum speed of the controller.in
Gigbits per second (Gbps).
Possible values:
1: The speed could not be determined.
2. 1.5 Gbps
3: 3.0 Gbps
4: 6.0 Gbps
5: 12.0 Gbps
Enumeration
Enumerated Values:
1unknown
2oneDotFiveGbps
3threeGbps
4sixGbps
5twelveGbps
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.1.1.76
controllerSASAddress mandatory
The SAS address of the controller.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.1.1.77
controllerFQDD mandatory
The controller's Fully Qualified Device Descriptor (FQDD) as
represented in Storage Management.
FQDDString
Textual Convention: FQDDString OctetString
Type Constraints:
range: 0..512
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.1.1.78
controllerDisplayName mandatory
The controller's friendly FQDD as represented in Storage
Management.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.1.1.79
controllerT10PICapability mandatory
Indicates whether the controller supports the T10 PI (Protection
Information). These protection fields are known as DIF
(Data Integrity Fields).
Possible values:
1: Not one of the following.
2: Capable of supporting T1…
Enumeration
Enumerated Values:
1other
2capable
3notCapable
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.1.1.80
controllerRAID10UnevenSpansSupported mandatory
Indicates whether uneven spans for RAID 10 virtual disk
is supported on the controller.
BooleanType
Textual Convention: BooleanType Integer32
Type Constraints:
range: 0..1
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.1.1.81
controllerEnhancedAutoImportForeignConfigMode mandatory
Indicates the status of enhanced auto-import of foreign
configuration property of the controller.
1: Not one of the following.
2: Not Supported.
3: Disabled.
4: Enabled.
Enumeration
Enumerated Values:
1other
2notSupported
3disabled
4enabled
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.1.1.82
controllerBootModeSupported mandatory
Indicates whether headless boot mode settings are supported
on the controller.
BooleanType
Textual Convention: BooleanType Integer32
Type Constraints:
range: 0..1
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.1.1.83
controllerBootMode mandatory
Indicates the boot mode of the controller.
Possible values:
1: Not applicable for this controller.
2: User mode: User interaction required for all boot messages (not
applicable for uEFI environments).
3: Continue Boot …
Enumeration
Enumerated Values:
1notApplicable
2user
3contOnError
4headlessContOnError
5headlessSafe
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.1.1.84
controllerHighAvailabilityMode mandatory
Indicates the fault-tolerant mode of the controller.
Possible values:
1: None
2: Fault Tolerant(Active/Passive)
3: Fault Tolerant(Active/Active)
4: Degraded
Enumeration
Enumerated Values:
1none
2faultTolerantActivePassive
3faultTolerantActiveActive
4degraded
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.1.1.85
controllerPeerController mandatory
The peer controller's Fully Qualified Device Descriptor (FQDD) as
represented in Storage Management.
FQDDString
Textual Convention: FQDDString OctetString
Type Constraints:
range: 0..512
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.1.1.86
controllerEncryptionKeyIdentifier mandatory
Displays the encryption security key identifier of the controller, if the
controller is encryption enabled and a security key is configured for the
controller.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.1.1.87

enclosureTable

table mandatory
.1.3.6.1.4.1.674.10892.2.6.1.20.130.3 · 1 row entry · 22 columns
Open in standard view 
A table of managed enclosures/backplanes. The number of entries is 
related to number of internal backplane(s) discovered in the system 
and external storage enclosure(s) attached to the system..
The maximum number of entries is implementation dependent.
Note: The properties in this table may not be applicable to all 
entries.
enclosureTableEntry entry .1.3.6.1.4.1.674.10892.2.6.1.20.130.3.1
An entry in the enclosure table. A row in this table cannot be
created or deleted by SNMP operations on columns of the table.
Indexes
enclosureNumber
Column Syntax OID
enclosureNumber mandatory
Instance number of this enclossre/backplane.
Integer32
Constraints:
range: 1-255
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.3.1.1
enclosureName mandatory
The enclosure/backplane's name as represented in Storage Management.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.3.1.2
enclosureState mandatory
The current state of this enclosure/backplane.
Possible states:
1: The current state could not be determined.
2: The enclosure is operating normally.
3: The enclosure has encountered a hardware problem or is not
respon…
Enumeration
Enumerated Values:
1unknown
2ready
3failed
4missing
5degraded
6foreign
7offline
8online
9blocked
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.3.1.4
enclosureServiceTag mandatory
Enclosure identification used when consulting customer support.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.3.1.8
enclosureAssetTag mandatory
The asset tag information for the enclosure.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.3.1.9
enclosureConnectedPort mandatory
The port on the controller to which the
storage enclosure is connected.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.3.1.19
enclosureRollUpStatus mandatory
Severity of the enclosure/backplane state.
This is the combined status of the enclosure and its sub-components.
Possible values:
1: Other.
2: Unknown.
3: OK.
4: Non-critical.
5: Critical.
6: Non-recoverable.
ObjectStatusEnum
Textual Convention: ObjectStatusEnum Enumeration
Type Values:
1other
2unknown
3ok
4nonCritical
5critical
6nonRecoverable
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.3.1.23
enclosureComponentStatus mandatory
The status of the enclosure/backplane.itself without the
propagation of any contained component status.
Possible values:
1: Other.
2: Unknown.
3: OK.
4: Non-critical .
5: Critical.
6: Non-recoverable.
ObjectStatusEnum
Textual Convention: ObjectStatusEnum Enumeration
Type Values:
1other
2unknown
3ok
4nonCritical
5critical
6nonRecoverable
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.3.1.24
enclosureFirmwareVersion mandatory
The firmware information for the enclosure/backplane.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.3.1.26
enclosureSASAddress mandatory
The SAS address of the enclosure/backplane.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.3.1.30
enclosureDriveCount mandatory
The number of disks present in the enclosure/backplane.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.3.1.31
enclosureTotalSlots mandatory
The total physical drive slots in a storage enclosure
or server backplane.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.3.1.32
enclosureFanCount mandatory
The number of fans present in the storage enclosure.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.3.1.40
enclosurePSUCount mandatory
The number of Power Supply Units (PSU) present
in the storage enclosure.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.3.1.41
enclosureEMMCount mandatory
The number of Enclosure Management Modules (EMM)
present in the storage enclosure.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.3.1.42
enclosureTempProbeCount mandatory
The number of temperature sensing devices
present in the storage enclosure.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.3.1.43
enclosureRedundantPath mandatory
Indicates whether the controller has multiply paths to
reach the storage enclosure.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.3.1.44
enclosurePosition mandatory
The possition of the storage enclosure within a daisy chain.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.3.1.45
enclosureBackplaneBayID mandatory
The unique bay ID of the backplane.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.3.1.46
enclosureFQDD mandatory
The enclosure/backplane's Fully Qualified Device Descriptor (FQDD)
as represented in Storage Management.
FQDDString
Textual Convention: FQDDString OctetString
Type Constraints:
range: 0..512
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.3.1.47
enclosureDisplayName mandatory
The enclosure/backplane's friendly FQDD as represented in
Storage Management.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.3.1.48
enclosureType mandatory
The protocol supported by the backplane.
Possible states:
1: Not one of the following or could not be determined.
2: Not applicable (i.e. object is not a backplane).
3: Supports SAS/SATA.
4: Supports PCIe.
5: Both SAS/S…
Enumeration
Enumerated Values:
1other
2notApplicable
3sassata
4pcie
5universal
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.3.1.49

physicalDiskTable

table mandatory
.1.3.6.1.4.1.674.10892.2.6.1.20.130.4 · 1 row entry · 38 columns
Open in standard view 
A table of managed physical disks. The number of entries is 
related to number of physical Disks discovered in the system.
The maximum number of entries is implementation dependent.
Note: The properties in this table may not be applicable to 
all entries.
physicalDiskTableEntry entry .1.3.6.1.4.1.674.10892.2.6.1.20.130.4.1
An entry in the physical Disk table. A row in this table cannot be
created or deleted by SNMP operations on columns of the table.
Indexes
physicalDiskNumber
Column Syntax OID
physicalDiskNumber mandatory
Instance number of this physical disk entry.
Integer32
Constraints:
range: 1-1000000000
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.4.1.1
physicalDiskName mandatory
The physical disk's name as represented in Storage Management.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.4.1.2
physicalDiskManufacturer mandatory
The name of the physical disk's manufacturer.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.4.1.3
physicalDiskState mandatory
The current state of this physical disk.
Possible states:
1: The current state could not be determined.
2: The physical disk is available for use, but no RAID configuration
has been assigned.
3: A RAID configuration h…
Enumeration
Enumerated Values:
1unknown
2ready
3online
4foreign
5offline
6blocked
7failed
8nonraid
9removed
10readonly
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.4.1.4
physicalDiskProductID mandatory
The model number of the physical disk.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.4.1.6
physicalDiskSerialNo mandatory
The physical disk's unique identification number
from the manufacturer.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.4.1.7
physicalDiskRevision mandatory
The firmware version of the physical disk.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.4.1.8
physicalDiskCapacityInMB mandatory
The size of the physical disk in megabytes.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.4.1.11
physicalDiskUsedSpaceInMB mandatory
The amount of used space in megabytes on the physical
disk. This is not applicable for NVMe devices.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.4.1.17
physicalDiskFreeSpaceInMB mandatory
The amount of free space in megabytes on the physical
disk. This is not applicable for NVMe devices.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.4.1.19
physicalDiskBusType mandatory
The bus type of the physical disk.
Possible values:
1: The bus type could not be determined.
2: Small Computer System Interface (SCSI).
3: Serial Attached SCSI (SAS).
4: Serial Advanced Technology Attachment (SATA).
5: …
Enumeration
Enumerated Values:
1unknown
2scsi
3sas
4sata
5fibre
6pcie
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.4.1.21
physicalDiskSpareState mandatory
The status of the disk as a spare.
Possible values:
1: Physical disk is not a spare.
2: Physical disk is a dedicated hot spare.
3: Physical disk is a global hot spare.
Enumeration
Enumerated Values:
1notASpare
2dedicatedHotSpare
3globalHotSpare
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.4.1.22
physicalDiskComponentStatus mandatory
The status of the physical disk itself without the
propagation of any contained component status.
Possible values:
1: Other
2: Unknown
3: OK
4: Non-critical
5: Critical
6: Non-recoverable
ObjectStatusEnum
Textual Convention: ObjectStatusEnum Enumeration
Type Values:
1other
2unknown
3ok
4nonCritical
5critical
6nonRecoverable
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.4.1.24
physicalDiskPartNumber mandatory
The part number of the disk.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.4.1.27
physicalDiskSASAddress mandatory
The SAS address of the physical disk.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.4.1.28
physicalDiskNegotiatedSpeed mandatory
The data transfer speed that the disk negotiated while spinning up
in Gigbits per second (Gbps).
Possible values:
1: The speed could not be determined.
2. 1.5 Gbps
3: 3.0 Gbps
4: 6.0 Gbps
5: 12.0 Gbps
6: 5 GT/s (applic…
Enumeration
Enumerated Values:
1unknown
2oneDotFiveGbps
3threeGbps
4sixGbps
5twelveGbps
6fiveGTps
7eightGTps
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.4.1.29
physicalDiskCapableSpeed mandatory
The maximum data transfer speed supported by the disk
in Gigbits per second (Gbps).
Possible values:
1: The speed could not be determined.
2. 1.5 Gbps
3: 3.0 Gbps
4: 6.0 Gbps
5: 12.0 Gbps
6: 5 GT/s (applicable for NVMe…
Enumeration
Enumerated Values:
1unknown
2oneDotFiveGbps
3threeGbps
4sixGbps
5twelveGbps
6fiveGTps
7eightGTps
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.4.1.30
physicalDiskSmartAlertIndication mandatory
Indicates whether the physical disk has received a predictive
failure alert.
BooleanType
Textual Convention: BooleanType Integer32
Type Constraints:
range: 0..1
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.4.1.31
physicalDiskManufactureDay mandatory
The day of the week (1=Sunday thru 7=Saturday)
on which the physical disk was manufactured.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.4.1.32
physicalDiskManufactureWeek mandatory
The week (1 thru 53) in which the physical disk
was manufactured.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.4.1.33
physicalDiskManufactureYear mandatory
The four digit year in which the physical disk was manufactured.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.4.1.34
physicalDiskMediaType mandatory
The media type of the physical disk.
Possible Values:
1: The media type could not be determined.
2: Hard Disk Drive (HDD).
3: Solid State Device (SSD).
Enumeration
Enumerated Values:
1unknown
2hdd
3ssd
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.4.1.35
physicalDiskPowerState mandatory
The power state of the physical disk.
Possible Values:
1: Not one of the following.
2: The physical disk is in the spun up state.
3: The physical disk is in the spun down state.
4: The physical disk is changing from spu…
Enumeration
Enumerated Values:
1other
2spunUp
3spunDown
4transition
5on
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.4.1.42
physicalDiskRemainingRatedWriteEndurance mandatory
This property is applicable to SSD media type only. This indicates
the wear-out percentage of the SSD. Typically it is a value between
0 to 100. However, if the value is not available or not applicable
(in the case o…
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.4.1.49
physicalDiskOperationalState mandatory
The state of the physical disk when there are progressive
operations ongoing.
Possible values:
1: There is no active operation running.
2: Data from a redundant virtual disk is
currently being rebuilt onto the physical…
Enumeration
Enumerated Values:
1notApplicable
2rebuild
3clear
4copyback
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.4.1.50
physicalDiskProgress mandatory
The progress percentage of the operation that is being
performed on the physical disk. This is applicable
only if there is a progressive operations ongoing
Integer32
Constraints:
range: 0-100
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.4.1.51
physicalDiskSecurityStatus mandatory
The security/encryption status of the physical disk.
Possible Values:
1: The physical disk supports encryption.
2: The physical disk does not support encryption
3: The physical disk is encrypted.
4: The physical disk is…
Enumeration
Enumerated Values:
1supported
2notSupported
3secured
4locked
5foreign
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.4.1.52
physicalDiskFormFactor mandatory
The form factor of the physical disk.
Possible values:
1: The form factor could not be determined.
2: 1.8 inch.
3: 2.5 inch.
4: 3.5 inch.
Enumeration
Enumerated Values:
1unknown
2oneDotEight
3twoDotFive
4threeDotFive
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.4.1.53
physicalDiskFQDD mandatory
The physical disk's Fully Qualified Device Descriptor (FQDD)
as represented in Storage Management.
FQDDString
Textual Convention: FQDDString OctetString
Type Constraints:
range: 0..512
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.4.1.54
physicalDiskDisplayName mandatory
The physical disk's friendly FQDD as represented in Storage
Management.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.4.1.55
physicalDiskT10PICapability mandatory
Indicates whether the physical disk supports the T10 PI (Protection
Information). These protection fields are known as DIF
(Data Integrity Fields).
Possible values:
1: Not one of the following.
2: Capable of supportin…
Enumeration
Enumerated Values:
1other
2capable
3notCapable
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.4.1.57
physicalDiskBlockSizeInBytes mandatory
The block size (in bytes) of the physical disk. This is not
applicable for NVMe devices.
Possible values:
1: 512.
2: 4096
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.4.1.58
physicalDiskProtocolVersion mandatory
Applicable for NVMe devices only. The NVMe protocol version supported
by the device.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.4.1.59
physicalDiskPCIeNegotiatedLinkWidth mandatory
Applicable for NVMe devices only. The PCIe link width negotiated with the host
during device initialization.
Enumeration
Enumerated Values:
1other
2notApplicable
3byOne
4byTwp
5byFour
6byEight
7bySixteen
8byThirtyTwp
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.4.1.60
physicalDiskPCIeCapableLinkWidth mandatory
Applicable for NVMe devices only. The PCIe link widths the device is capable of
supporting.
Enumeration
Enumerated Values:
1other
2notApplicable
3byOne
4byTwp
5byFour
6byEight
7bySixteen
8byThirtyTwp
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.4.1.61
physicalDiskCurrentActiveController mandatory
Indicates the Fully Qualified Device Descriptor (FQDD) of
the current active controller.
FQDDString
Textual Convention: FQDDString OctetString
Type Constraints:
range: 0..512
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.4.1.62
physicalDiskFailoverController mandatory
Indicates the Fully Qualified Device Descriptor (FQDD) of
the failover controller.
FQDDString
Textual Convention: FQDDString OctetString
Type Constraints:
range: 0..512
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.4.1.63
physicalDiskForeignKeyIdentifier mandatory
Displays the encryption key identifier of the physical disk if it is in
locked or foreign state.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.4.1.64

enclosureFanTable

table mandatory
.1.3.6.1.4.1.674.10892.2.6.1.20.130.7 · 1 row entry · 7 columns
Open in standard view 
A table of managed fans in the external storage enclosure(s). 
The number of entries is related to number of fans discovered in 
the enclosure(s). The maximum number of entries is implementation 
dependent.
Note: The properties in this table may not be applicable to all 
entries.
enclosureFanTableEntry entry .1.3.6.1.4.1.674.10892.2.6.1.20.130.7.1
An entry in the fan table. A row in this table cannot be
created or deleted by SNMP operations on columns of the table.
Indexes
enclosureFanNumber
Column Syntax OID
enclosureFanNumber mandatory
Instance number of this fan.
Integer32
Constraints:
range: 1-255
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.7.1.1
enclosureFanName mandatory
The fan's name as represented in Storage Management.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.7.1.2
enclosureFanState mandatory
The current state of this fan.
Possible states:
1: The current state could not be determined.
2: The fan is operating normally.
3: The fan has encountered a hardware problem or is not
responding.
4: The fan is no longe…
Enumeration
Enumerated Values:
1unknown
2ready
3failed
4missing
5degraded
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.7.1.4
enclosureFanSpeed mandatory
Indicates the current relative speed of the fan in RPMs.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.7.1.11
enclosureFanComponentStatus mandatory
The status of the fan itself without the
propagation of any contained component status.
Possible values:
1: Other.
2: Unknown.
3: OK.
4: Non-critical .
5: Critical.
6: Non-recoverable.
ObjectStatusEnum
Textual Convention: ObjectStatusEnum Enumeration
Type Values:
1other
2unknown
3ok
4nonCritical
5critical
6nonRecoverable
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.7.1.15
enclosureFanFQDD mandatory
The fan's Fully Qualified Device Descriptor (FQDD)
as represented in Storage Management.
FQDDString
Textual Convention: FQDDString OctetString
Type Constraints:
range: 0..512
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.7.1.20
enclosureFanDisplayName mandatory
The fan's friendly FQDD as represented in
Storage Management.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.7.1.21

enclosurePowerSupplyTable

table mandatory
.1.3.6.1.4.1.674.10892.2.6.1.20.130.9 · 1 row entry · 7 columns
Open in standard view 
A table of managed Power Supply Units(PSU) in the external 
storage enclosure(s). The number of entries is related to number 
of power supply unit(s) discovered in the enclosure(s). The 
maximum number of entries is implementation 
dependent.
Note: The properties in this table may not be applicable to all 
entries.
enclosurePowerSupplyTableEntry entry .1.3.6.1.4.1.674.10892.2.6.1.20.130.9.1
An entry in the power supply unit table. A row in this table cannot
be created or deleted by SNMP operations on columns of the table.
Indexes
enclosurePowerSupplyNumber
Column Syntax OID
enclosurePowerSupplyNumber mandatory
Instance number of this power supply unit.
Integer32
Constraints:
range: 1-255
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.9.1.1
enclosurePowerSupplyName mandatory
The power supply unit's name as represented in
Storage Management.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.9.1.2
enclosurePowerSupplyState mandatory
The current state of this power supply unit.
Possible states:
1: The current state could not be determined.
2: The power supply unit is operating normally.
3: The power supply unit has encountered a hardware problem
or…
Enumeration
Enumerated Values:
1unknown
2ready
3failed
4missing
5degraded
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.9.1.4
enclosurePowerSupplyPartNumber mandatory
The part number of the power supply unit.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.9.1.7
enclosurePowerSupplyComponentStatus mandatory
The status of the power supply unit itself without the
propagation of any contained component status.
Possible values:
1: Other.
2: Unknown.
3: OK.
4: Non-critical .
5: Critical.
6: Non-recoverable.
ObjectStatusEnum
Textual Convention: ObjectStatusEnum Enumeration
Type Values:
1other
2unknown
3ok
4nonCritical
5critical
6nonRecoverable
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.9.1.9
enclosurePowerSupplyFQDD mandatory
The power supply unit's Fully Qualified Device Descriptor (FQDD)
as represented in Storage Management.
FQDDString
Textual Convention: FQDDString OctetString
Type Constraints:
range: 0..512
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.9.1.15
enclosurePowerSupplyDisplayName mandatory
The power supply unit's friendly FQDD as represented in
Storage Management.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.9.1.16

enclosureTemperatureProbeTable

table mandatory
.1.3.6.1.4.1.674.10892.2.6.1.20.130.11 · 1 row entry · 11 columns
Open in standard view 
A table of managed temperature probes in the external storage
enclosure(s). The number of entries is related to number of 
temperature probes discovered in the enclosure(s). The maximum 
number of entries is implementation dependent.
Note: The properties in this table may not be applicable to all 
entries.
enclosureTemperatureProbeTableEntry entry .1.3.6.1.4.1.674.10892.2.6.1.20.130.11.1
An entry in the temperature probe table. A row in this table cannot be
created or deleted by SNMP operations on columns of the table.
Indexes
enclosureTemperatureProbeNumber
Column Syntax OID
enclosureTemperatureProbeNumber mandatory
Instance number of this temperature probe.
Integer32
Constraints:
range: 1-255
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.11.1.1
enclosureTemperatureProbeName mandatory
The temperature probe's name as represented in
Storage Management.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.11.1.2
enclosureTemperatureProbeState mandatory
The current state of this temperature probe.
Possible states:
1: The current state could not be determined.
2: The temperature probe is operating normally.
3: The temperature probe has encountered a hardware problem
or…
Enumeration
Enumerated Values:
1unknown
2ready
3failed
4missing
5degraded
6overWarning
7underWarning
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.11.1.4
enclosureTemperatureProbeMinWarningValue mandatory
The minimum temperature that will force the probe into
a warning state.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.11.1.7
enclosureTemperatureProbeMinCriticalValue mandatory
The minimum temperature that will force the probe into
a error state.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.11.1.8
enclosureTemperatureProbeMaxWarningValue mandatory
The maximum temperature that will force the probe into
a warning state.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.11.1.9
enclosureTemperatureProbeMaxCriticalValue mandatory
The maximum temperature that will force the probe into
a warning state.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.11.1.10
enclosureTemperatureProbeCurValue mandatory
The maximum temperature that will force the probe into
a warning state.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.11.1.11
enclosureTemperatureProbeComponentStatus mandatory
The status of the enclosure management module.itself without the
propagation of any contained component status.
Possible values:
1: Other.
2: Unknown.
3: OK.
4: Non-critical .
5: Critical.
6: Non-recoverable.
ObjectStatusEnum
Textual Convention: ObjectStatusEnum Enumeration
Type Values:
1other
2unknown
3ok
4nonCritical
5critical
6nonRecoverable
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.11.1.13
enclosureTemperatureProbeFQDD mandatory
The temperature probe's Fully Qualified Device Descriptor (FQDD)
as represented in Storage Management.
FQDDString
Textual Convention: FQDDString OctetString
Type Constraints:
range: 0..512
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.11.1.15
enclosureTemperatureProbeDisplayName mandatory
The temperature probe's friendly FQDD as represented
in Storage Management.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.11.1.16

enclosureManagementModuleTable

table mandatory
.1.3.6.1.4.1.674.10892.2.6.1.20.130.13 · 1 row entry · 8 columns
Open in standard view 
A table of managed Enclosure Management Modules (EMM) 
in the external storage enclosure(s). The number of 
entries is related to number of enclosure management modules
discovered in the enclosure(s). The maximum number of entries 
is implementation dependent.
Note: The properties in this table may not be applicable to all 
entries.
enclosureManagementModuleTableEntry entry .1.3.6.1.4.1.674.10892.2.6.1.20.130.13.1
An entry in the enclosure management module table. A row in
this table cannot be created or deleted by SNMP operations
on columns of the table.
Indexes
enclosureManagementModuleNumber
Column Syntax OID
enclosureManagementModuleNumber mandatory
Instance number of this enclosure management module.
Integer32
Constraints:
range: 1-255
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.13.1.1
enclosureManagementModuleName mandatory
The enclosure management module's name as
represented in Storage Management.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.13.1.2
enclosureManagementModuleState mandatory
The current state of this enclosure management module.
Possible states:
1: The current state could not be determined.
2: The enclosure management module is operating normally.
3: The enclosure management module has enco…
Enumeration
Enumerated Values:
1unknown
2ready
3failed
4missing
5degraded
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.13.1.4
enclosureManagementModulePartNumber mandatory
The part number of the enclosure management module.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.13.1.6
enclosureManagementModuleFWVersion mandatory
Firmware version of the enclosure management module.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.13.1.8
enclosureManagementModuleComponentStatus mandatory
The status of the enclosure management module.itself without the
propagation of any contained component status.
Possible values:
1: Other.
2: Unknown.
3: OK.
4: Non-critical .
5: Critical.
6: Non-recoverable.
ObjectStatusEnum
Textual Convention: ObjectStatusEnum Enumeration
Type Values:
1other
2unknown
3ok
4nonCritical
5critical
6nonRecoverable
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.13.1.11
enclosureManagementModuleFQDD mandatory
The enclosure management module's Fully Qualified Device
Descriptor (FQDD) as represented in Storage Management.
FQDDString
Textual Convention: FQDDString OctetString
Type Constraints:
range: 0..512
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.13.1.15
enclosureManagementModuleDisplayName mandatory
The enclosure management module's friendly FQDD as represented in
Storage Management.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.13.1.16

batteryTable

table mandatory
.1.3.6.1.4.1.674.10892.2.6.1.20.130.15 · 1 row entry · 6 columns
Open in standard view 
A table of managed batteries. The number of 
entries is related to number of Batteries
discovered in the system.  The maximum number of entries 
is implementation dependent.
Note: The properties in this table may not be applicable to all 
entries.
batteryTableEntry entry .1.3.6.1.4.1.674.10892.2.6.1.20.130.15.1
An entry in the battery table. A row in this table cannot be
created or deleted by SNMP operations on columns of the table.
Indexes
batteryNumber
Column Syntax OID
batteryNumber mandatory
Instance number of this battery entry.
Integer32
Constraints:
range: 1-255
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.15.1.1
batteryState mandatory
Current state of battery.
Possible values:
1: The current state could not be determined.
2: The battery is operating normally.
3: The battery has failed and needs to be replaced.
4: The battery temperature is high or ch…
Enumeration
Enumerated Values:
1unknown
2ready
3failed
4degraded
5missing
6charging
7belowThreshold
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.15.1.4
batteryComponentStatus mandatory
The status of the battery itself without the
propagation of any contained component status.
Possible values:
1: Other
2: Unknown
3: OK
4: Non-critical
5: Critical
6: Non-recoverable
ObjectStatusEnum
Textual Convention: ObjectStatusEnum Enumeration
Type Values:
1other
2unknown
3ok
4nonCritical
5critical
6nonRecoverable
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.15.1.6
batteryPredictedCapacity obsolete
This entry is obsolete. Use the batteryComponentStatus or
batteryState instead.
Enumeration
Enumerated Values:
1unknown
2failed
3ready
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.15.1.10
batteryFQDD mandatory
The battery's Fully Qualified Device Descriptor (FQDD) as
represented in Storage Management.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.15.1.20
batteryDisplayName mandatory
The battery's friendly FQDD as represented in Storage Management.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.15.1.21

virtualDiskTable

table mandatory
.1.3.6.1.4.1.674.10892.2.6.1.20.140.1 · 1 row entry · 28 columns
Open in standard view 
A table of managed virtual disks. The number of entries is related
to number of virtual disks discovered in the system. 
The maximum number of entries is implementation dependent.
Note: The properties in this table may not be applicable to all
entries.
virtualDiskTableEntry entry .1.3.6.1.4.1.674.10892.2.6.1.20.140.1.1
An entry in the virtual disk table. A row in this table cannot be
created or deleted by SNMP operations on columns of the table.
Indexes
virtualDiskNumber
Column Syntax OID
virtualDiskNumber mandatory
Instance number of this virtual disk entry.
Integer32
Constraints:
range: 1-100000000
 .1.3.6.1.4.1.674.10892.2.6.1.20.140.1.1.1
virtualDiskName mandatory
The virtual disk's label as entered by the user.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.674.10892.2.6.1.20.140.1.1.2
virtualDiskState mandatory
The current state of this virtual disk
(which includes any member physical disks.)
Possible states:
1: The current state could not be determined.
2: The virtual disk is operating normally or optimally.
3: The virtual di…
Enumeration
Enumerated Values:
1unknown
2online
3failed
4degraded
 .1.3.6.1.4.1.674.10892.2.6.1.20.140.1.1.4
virtualDiskSizeInMB mandatory
The size of the virtual disk in megabytes.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.674.10892.2.6.1.20.140.1.1.6
virtualDiskWritePolicy mandatory
The write policy used by the controller for write operations on
this virtual disk.
Possible values:
1: Write Through.
2: Write Back.
3: Force Write Back.
Enumeration
Enumerated Values:
1writeThrough
2writeBack
3writeBackForce
 .1.3.6.1.4.1.674.10892.2.6.1.20.140.1.1.10
virtualDiskReadPolicy mandatory
The read policy used by the controller for read operations on
this virtual disk.
Possible values:
1: No Read Ahead.
2: Read Ahead.
3: Adaptive Read Ahead.
Enumeration
Enumerated Values:
1noReadAhead
2readAhead
3adaptiveReadAhead
 .1.3.6.1.4.1.674.10892.2.6.1.20.140.1.1.11
virtualDiskLayout mandatory
The virtual disk's RAID type.
Possible values:
1: Not one of the following
2: RAID-0
3: RAID-1
4: RAID-5
5: RAID-6
6: RAID-10
7: RAID-50
8: RAID-60
9: Concatenated RAID 1
10: Concatenated RAID 5
Enumeration
Enumerated Values:
1other
2r0
3r1
4r5
5r6
6r10
7r50
8r60
9concatRaid1
10concatRaid5
 .1.3.6.1.4.1.674.10892.2.6.1.20.140.1.1.13
virtualDiskStripeSize mandatory
The stripe size of this virtual disk.
Possible values:
1: Not one of the following
2: Default.
3: 512 bytes
4: 1 kB,
5: 2 kB,
6: 4 kB,
7: 8 kB,
8: 16 kB,
9: 32 kB,
10: 64 kB,
11: 128 kB,
12: 256 kB,
13: 512 kB,
14: 1 MB…
Enumeration
Enumerated Values:
1other
2default
3fiveHundredAndTwelvebytes
4oneKilobytes
5twoKilobytes
6fourKilobytes
7eightKilobytes
8sixteenKilobytes
9thirtyTwoKilobytes
10sixtyFourKilobytes
11oneTwentyEightKilobytes
12twoFiftySixKilobytes
13fiveOneTwoKilobytes
14oneMegabye
15twoMegabytes
16fourMegabytes
17eightMegabytes
18sixteenMegabytes
 .1.3.6.1.4.1.674.10892.2.6.1.20.140.1.1.14
virtualDiskComponentStatus mandatory
The status of the virtual disk itself without the
propagation of any contained component status.
Possible values:
1: Other.
2: Unknown.
3: OK.
4: Non-critical .
5: Critical.
6: Non-recoverable.
ObjectStatusEnum
Textual Convention: ObjectStatusEnum Enumeration
Type Values:
1other
2unknown
3ok
4nonCritical
5critical
6nonRecoverable
 .1.3.6.1.4.1.674.10892.2.6.1.20.140.1.1.20
virtualDiskBadBlocksDetected mandatory
Indicates whether the virtual disk has bad blocks.
BooleanType
Textual Convention: BooleanType Integer32
Type Constraints:
range: 0..1
 .1.3.6.1.4.1.674.10892.2.6.1.20.140.1.1.23
virtualDiskSecured mandatory
Indicates whether the virtual disk is secured or not.
BooleanType
Textual Convention: BooleanType Integer32
Type Constraints:
range: 0..1
 .1.3.6.1.4.1.674.10892.2.6.1.20.140.1.1.24
virtualDiskIsCacheCade mandatory
Indicates whether the virtual disk is being used as a secondary
cache by the controller.
BooleanType
Textual Convention: BooleanType Integer32
Type Constraints:
range: 0..1
 .1.3.6.1.4.1.674.10892.2.6.1.20.140.1.1.25
virtualDiskDiskCachePolicy mandatory
The cache policy of the physical disks that are
part of this virtual disk
Possible values:
1: Enabled.
2: Disabled.
3: Default.
Enumeration
Enumerated Values:
1enabled
2disabled
3defullt
 .1.3.6.1.4.1.674.10892.2.6.1.20.140.1.1.26
virtualDiskOperationalState mandatory
The state of the virtual disk when there are progressive
operations ongoing.
Possible values:
1: There is no active operation running.
2: The virtual disk configuration has changed.
The physical disks included in the vi…
Enumeration
Enumerated Values:
1notApplicable
2reconstructing
3resynching
4initializing
5backgroundInit
 .1.3.6.1.4.1.674.10892.2.6.1.20.140.1.1.30
virtualDiskProgress mandatory
The progress percentage of the operation that is being
performed on the virtual disk. This is applicable
only if there is a progressive operations ongoing
Integer32
Constraints:
range: 0-100
 .1.3.6.1.4.1.674.10892.2.6.1.20.140.1.1.31
virtualDiskAvailableProtocols mandatory
List of protocols support by physical disks part of this virtual
disk. For e.g. SAS for Serial Attached SCSI or SATA for
Serial Advanced Technology Attachment.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.674.10892.2.6.1.20.140.1.1.32
virtualDiskMediaType mandatory
List of media types of the physical disks part of this virtual
disk. For e.g. HDD for Hard Disk Drive or SSD for Solid State Device.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.674.10892.2.6.1.20.140.1.1.33
virtualDiskRemainingRedundancy mandatory
The number of physical disks which can be lost before the
virtual disk loses its redundancy.
Integer32
Constraints:
range: 0-2
 .1.3.6.1.4.1.674.10892.2.6.1.20.140.1.1.34
virtualDiskFQDD mandatory
The virtual disk's Fully Qualified Device Descriptor (FQDD) as
represented in Storage Management.
FQDDString
Textual Convention: FQDDString OctetString
Type Constraints:
range: 0..512
 .1.3.6.1.4.1.674.10892.2.6.1.20.140.1.1.35
virtualDiskDisplayName mandatory
The virtual disk's friendly FQDD as represented in Storage
Management.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.674.10892.2.6.1.20.140.1.1.36
virtualDiskT10PIStatus mandatory
Indicates whether the virtual disk supports the T10 PI (Protection
Information). These protection fields are known as DIF
(Data Integrity Fields).
Possible values:
1: Not one of the following.
2: Enabled.
3: Disabled.
Enumeration
Enumerated Values:
1other
2enabled
3disabled
 .1.3.6.1.4.1.674.10892.2.6.1.20.140.1.1.37
virtualDiskBlockSizeInBytes mandatory
The block size (in bytes) of the physical disk part of the virtual disk.
Possible values:
1: 512.
2: 4096
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.674.10892.2.6.1.20.140.1.1.38
virtualDiskAdapter1AccessPolicy mandatory
Indicates the access policy of the virtual disk with the virtual
adapters.
Possible values:
1: No Access.
2: Full Access
Enumeration
Enumerated Values:
1noAccess
2fullAccess
 .1.3.6.1.4.1.674.10892.2.6.1.20.140.1.1.39
virtualDiskAdapter2AccessPolicy mandatory
Indicates the access policy of the virtual disk with the virtual
adapters.
Possible values:
1: No Access.
2: Full Access
Enumeration
Enumerated Values:
1noAccess
2fullAccess
 .1.3.6.1.4.1.674.10892.2.6.1.20.140.1.1.40
virtualDiskAdapter3AccessPolicy mandatory
Indicates the access policy of the virtual disk with the virtual
adapters.
Possible values:
1: No Access.
2: Full Access
Enumeration
Enumerated Values:
1noAccess
2fullAccess
 .1.3.6.1.4.1.674.10892.2.6.1.20.140.1.1.41
virtualDiskAdapter4AccessPolicy mandatory
Indicates the access policy of the virtual disk with the virtual
adapters.
Possible values:
1: No Access.
2: Full Access
Enumeration
Enumerated Values:
1noAccess
2fullAccess
 .1.3.6.1.4.1.674.10892.2.6.1.20.140.1.1.42
virtualDiskCurrentActiveController mandatory
Indicates the Fully Qualified Device Descriptor (FQDD) of
the current active controller.
FQDDString
Textual Convention: FQDDString OctetString
Type Constraints:
range: 0..512
 .1.3.6.1.4.1.674.10892.2.6.1.20.140.1.1.43
virtualDiskFailoverController mandatory
Indicates the Fully Qualified Device Descriptor (FQDD) of
the failover controller.
FQDDString
Textual Convention: FQDDString OctetString
Type Constraints:
range: 0..512
 .1.3.6.1.4.1.674.10892.2.6.1.20.140.1.1.44