physicalDiskCurrentActiveController
DELL-RAC-MIB ·
.1.3.6.1.4.1.674.10892.2.6.1.20.130.4.1.62
Object
column
mandatory
FQDDString
Indicates the Fully Qualified Device Descriptor (FQDD) of the current active controller.
Context
- MIB
- DELL-RAC-MIB
- OID
.1.3.6.1.4.1.674.10892.2.6.1.20.130.4.1.62- Type
- column
- Access
- readonly
- Status
- mandatory
- Parent
- physicalDiskTableEntry
- Table
- physicalDiskTable
- Siblings
- 37
Syntax
FQDDString
- Source
- FQDDString
- Base type
OctetString
Values & Constraints
Type Constraints
range: 0..512
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| physicalDiskNumber mandatory Instance number of this physical disk entry. | column | Integer32 | .1.3.6.1.4.1.674.10892.2.6.1.20.130.4.1.1 |
| physicalDiskCapacityInMB mandatory The size of the physical disk in megabytes. | column | Integer32 | .1.3.6.1.4.1.674.10892.2.6.1.20.130.4.1.11 |
| physicalDiskUsedSpaceInMB mandatory The amount of used space in megabytes on the physical
disk. This is not applicable for NVMe devices. | column | Integer32 | .1.3.6.1.4.1.674.10892.2.6.1.20.130.4.1.17 |
| physicalDiskFreeSpaceInMB mandatory The amount of free space in megabytes on the physical
disk. This is not applicable for NVMe devices. | column | Integer32 | .1.3.6.1.4.1.674.10892.2.6.1.20.130.4.1.19 |
| physicalDiskName mandatory The physical disk's name as represented in Storage Management. | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.674.10892.2.6.1.20.130.4.1.2 |
| physicalDiskBusType mandatory The bus type of the physical disk.
Possible values:
1: The bus type could not be determined.
2: Small Computer System Interface (SCSI).
3: Serial Attached SCSI (SAS).
4: Serial Ad… | column | Enumeration | .1.3.6.1.4.1.674.10892.2.6.1.20.130.4.1.21 |
| physicalDiskSpareState mandatory The status of the disk as a spare.
Possible values:
1: Physical disk is not a spare.
2: Physical disk is a dedicated hot spare.
3: Physical disk is a global hot spare. | column | Enumeration | .1.3.6.1.4.1.674.10892.2.6.1.20.130.4.1.22 |
| physicalDiskComponentStatus mandatory The status of the physical disk itself without the
propagation of any contained component status.
Possible values:
1: Other
2: Unknown
3: OK
4: Non-critical
5: Critical
6: Non-… | column | ObjectStatusEnum | .1.3.6.1.4.1.674.10892.2.6.1.20.130.4.1.24 |
| physicalDiskPartNumber mandatory The part number of the disk. | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.674.10892.2.6.1.20.130.4.1.27 |
| physicalDiskSASAddress mandatory The SAS address of the physical disk. | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.674.10892.2.6.1.20.130.4.1.28 |
| physicalDiskNegotiatedSpeed mandatory The data transfer speed that the disk negotiated while spinning up
in Gigbits per second (Gbps).
Possible values:
1: The speed could not be determined.
2. 1.5 Gbps
3: 3.0 Gbps
4:… | column | Enumeration | .1.3.6.1.4.1.674.10892.2.6.1.20.130.4.1.29 |
| physicalDiskManufacturer mandatory The name of the physical disk's manufacturer. | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.674.10892.2.6.1.20.130.4.1.3 |
| physicalDiskCapableSpeed mandatory The maximum data transfer speed supported by the disk
in Gigbits per second (Gbps).
Possible values:
1: The speed could not be determined.
2. 1.5 Gbps
3: 3.0 Gbps
4: 6.0 Gbps
5: … | column | Enumeration | .1.3.6.1.4.1.674.10892.2.6.1.20.130.4.1.30 |
| physicalDiskSmartAlertIndication mandatory Indicates whether the physical disk has received a predictive
failure alert. | column | BooleanType | .1.3.6.1.4.1.674.10892.2.6.1.20.130.4.1.31 |
| physicalDiskManufactureDay mandatory The day of the week (1=Sunday thru 7=Saturday)
on which the physical disk was manufactured. | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.674.10892.2.6.1.20.130.4.1.32 |
| physicalDiskManufactureWeek mandatory The week (1 thru 53) in which the physical disk
was manufactured. | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.674.10892.2.6.1.20.130.4.1.33 |
| physicalDiskManufactureYear mandatory The four digit year in which the physical disk was manufactured. | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.674.10892.2.6.1.20.130.4.1.34 |
| physicalDiskMediaType mandatory The media type of the physical disk.
Possible Values:
1: The media type could not be determined.
2: Hard Disk Drive (HDD).
3: Solid State Device (SSD). | column | Enumeration | .1.3.6.1.4.1.674.10892.2.6.1.20.130.4.1.35 |
| physicalDiskState mandatory The current state of this physical disk.
Possible states:
1: The current state could not be determined.
2: The physical disk is available for use, but no RAID configuration
has b… | column | Enumeration | .1.3.6.1.4.1.674.10892.2.6.1.20.130.4.1.4 |
| physicalDiskPowerState mandatory The power state of the physical disk.
Possible Values:
1: Not one of the following.
2: The physical disk is in the spun up state.
3: The physical disk is in the spun down state.
4… | column | Enumeration | .1.3.6.1.4.1.674.10892.2.6.1.20.130.4.1.42 |
| physicalDiskRemainingRatedWriteEndurance mandatory This property is applicable to SSD media type only. This indicates
the wear-out percentage of the SSD. Typically it is a value between
0 to 100. However, if the value is not ava… | column | Integer32 | .1.3.6.1.4.1.674.10892.2.6.1.20.130.4.1.49 |
| physicalDiskOperationalState mandatory The state of the physical disk when there are progressive
operations ongoing.
Possible values:
1: There is no active operation running.
2: Data from a redundant virtual disk is
c… | column | Enumeration | .1.3.6.1.4.1.674.10892.2.6.1.20.130.4.1.50 |
| physicalDiskProgress mandatory The progress percentage of the operation that is being
performed on the physical disk. This is applicable
only if there is a progressive operations ongoing | column | Integer32 | .1.3.6.1.4.1.674.10892.2.6.1.20.130.4.1.51 |
| physicalDiskSecurityStatus mandatory The security/encryption status of the physical disk.
Possible Values:
1: The physical disk supports encryption.
2: The physical disk does not support encryption
3: The physical di… | column | Enumeration | .1.3.6.1.4.1.674.10892.2.6.1.20.130.4.1.52 |
| physicalDiskFormFactor mandatory The form factor of the physical disk.
Possible values:
1: The form factor could not be determined.
2: 1.8 inch.
3: 2.5 inch.
4: 3.5 inch. | column | Enumeration | .1.3.6.1.4.1.674.10892.2.6.1.20.130.4.1.53 |
| physicalDiskFQDD mandatory The physical disk's Fully Qualified Device Descriptor (FQDD)
as represented in Storage Management. | column | FQDDString | .1.3.6.1.4.1.674.10892.2.6.1.20.130.4.1.54 |
| physicalDiskDisplayName mandatory The physical disk's friendly FQDD as represented in Storage
Management. | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.674.10892.2.6.1.20.130.4.1.55 |
| physicalDiskT10PICapability mandatory Indicates whether the physical disk supports the T10 PI (Protection
Information). These protection fields are known as DIF
(Data Integrity Fields).
Possible values:
1: Not one o… | column | Enumeration | .1.3.6.1.4.1.674.10892.2.6.1.20.130.4.1.57 |
| physicalDiskBlockSizeInBytes mandatory The block size (in bytes) of the physical disk. This is not
applicable for NVMe devices.
Possible values:
1: 512.
2: 4096 | column | Integer32 | .1.3.6.1.4.1.674.10892.2.6.1.20.130.4.1.58 |
| physicalDiskProtocolVersion mandatory Applicable for NVMe devices only. The NVMe protocol version supported
by the device. | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.674.10892.2.6.1.20.130.4.1.59 |
| physicalDiskProductID mandatory The model number of the physical disk. | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.674.10892.2.6.1.20.130.4.1.6 |
| physicalDiskPCIeNegotiatedLinkWidth mandatory Applicable for NVMe devices only. The PCIe link width negotiated with the host
during device initialization. | column | Enumeration | .1.3.6.1.4.1.674.10892.2.6.1.20.130.4.1.60 |
| physicalDiskPCIeCapableLinkWidth mandatory Applicable for NVMe devices only. The PCIe link widths the device is capable of
supporting. | column | Enumeration | .1.3.6.1.4.1.674.10892.2.6.1.20.130.4.1.61 |
| physicalDiskFailoverController mandatory Indicates the Fully Qualified Device Descriptor (FQDD) of
the failover controller. | column | FQDDString | .1.3.6.1.4.1.674.10892.2.6.1.20.130.4.1.63 |
| physicalDiskForeignKeyIdentifier mandatory Displays the encryption key identifier of the physical disk if it is in
locked or foreign state. | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.674.10892.2.6.1.20.130.4.1.64 |
| physicalDiskSerialNo mandatory The physical disk's unique identification number
from the manufacturer. | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.674.10892.2.6.1.20.130.4.1.7 |
| physicalDiskRevision mandatory The firmware version of the physical disk. | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.674.10892.2.6.1.20.130.4.1.8 |