controllerRAID10UnevenSpansSupported
DELL-RAC-MIB ·
.1.3.6.1.4.1.674.10892.2.6.1.20.130.1.1.81
Object
column
mandatory
BooleanType
Indicates whether uneven spans for RAID 10 virtual disk is supported on the controller.
Context
- MIB
- DELL-RAC-MIB
- OID
.1.3.6.1.4.1.674.10892.2.6.1.20.130.1.1.81- Type
- column
- Access
- readonly
- Status
- mandatory
- Parent
- controllerTableEntry
- Table
- controllerTable
- Siblings
- 37
Syntax
BooleanType
- Source
- BooleanType
- Base type
Integer32
Values & Constraints
Type Constraints
range: 0..1
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| controllerNumber mandatory Instance number of this controller entry. | column | Integer32 | .1.3.6.1.4.1.674.10892.2.6.1.20.130.1.1.1 |
| controllerName mandatory The controller's name as represented in Storage Management. | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.674.10892.2.6.1.20.130.1.1.2 |
| controllerRollUpStatus mandatory Severity of the controller state.
This is the combined status of the controller and its components.
Possible values:
1: Other.
2: Unknown.
3: OK
4: Non-critical
5: Critical.
6… | column | ObjectStatusEnum | .1.3.6.1.4.1.674.10892.2.6.1.20.130.1.1.37 |
| controllerComponentStatus mandatory The status of the controller itself without the
propagation of any contained component status.
Possible values:
1: Other
2: Unknown
3: OK
4: Non-critical
5: Critical
6: Non-rec… | column | ObjectStatusEnum | .1.3.6.1.4.1.674.10892.2.6.1.20.130.1.1.38 |
| controllerDriverVersion mandatory Currently installed driver version for this controller on the host. | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.674.10892.2.6.1.20.130.1.1.41 |
| controllerPCISlot mandatory The PCI slot on the server where the controller is seated. This
data is not reported for embedded or integrated controllers, | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.674.10892.2.6.1.20.130.1.1.42 |
| controllerReconstructRate mandatory The reconstruct rate is the percentage of the controller's resources
dedicated to reconstructing a disk group after adding a physical disk
or changing the RAID level of a virtua… | column | Integer32 | .1.3.6.1.4.1.674.10892.2.6.1.20.130.1.1.48 |
| controllerPatrolReadRate mandatory The patrol read rate is the percentage of the controller's
resources dedicated to perform a patrol read on disks participating
in a virtual disk or hot spares. | column | Integer32 | .1.3.6.1.4.1.674.10892.2.6.1.20.130.1.1.49 |
| controllerBGIRate mandatory The background initialization (BGI) rate is the percentage of the
controller's resources dedicated to performing the background
initialization of a redundant virtual disk after … | column | Integer32 | .1.3.6.1.4.1.674.10892.2.6.1.20.130.1.1.50 |
| controllerCheckConsistencyRate mandatory The check consistency rate is the percentage of the
controller's resources dedicated to performing a check consistency
on a redundant virtual disk. | column | Integer32 | .1.3.6.1.4.1.674.10892.2.6.1.20.130.1.1.51 |
| controllerPatrolReadMode mandatory Identifies the patrol read mode setting for the controller.
Possible values:
1: Not one of the following or could not be determined.
2: Not Supported on this controller.
3: Disab… | column | Enumeration | .1.3.6.1.4.1.674.10892.2.6.1.20.130.1.1.52 |
| controllerPatrolReadState mandatory This property displays the current state of the patrol read process.
Possible values:
1: Not one of the following or could not be determined.
2: Patrol read is not running.
3: Pat… | column | Enumeration | .1.3.6.1.4.1.674.10892.2.6.1.20.130.1.1.53 |
| controllerPersistentHotSpare mandatory Indicates whether hot spare drives would be restored on insertion
into the same slot. | column | BooleanType | .1.3.6.1.4.1.674.10892.2.6.1.20.130.1.1.59 |
| controllerSpinDownUnconfiguredDrives mandatory Indicates whether un-configured drives would be put in power
save mode by the controller. | column | BooleanType | .1.3.6.1.4.1.674.10892.2.6.1.20.130.1.1.60 |
| controllerSpinDownHotSpareDrives mandatory Indicates whether hot spare drives would be put in power
save mode by the controller. | column | BooleanType | .1.3.6.1.4.1.674.10892.2.6.1.20.130.1.1.61 |
| controllerSpinDownTimeInterval mandatory The duration in minutes after which, the unconfigured or hot
spare drives will be spun down to power save mode. | column | Integer32 | .1.3.6.1.4.1.674.10892.2.6.1.20.130.1.1.62 |
| controllerPreservedCache mandatory Indicates whether preserved cache or pinned cache is
present on the controller. | column | BooleanType | .1.3.6.1.4.1.674.10892.2.6.1.20.130.1.1.69 |
| controllerRebuildRate mandatory The rebuild rate is the percentage of the controller's
resources dedicated to rebuilding a failed disk when a rebuild
is necessary. | column | Integer32 | .1.3.6.1.4.1.674.10892.2.6.1.20.130.1.1.7 |
| controllerCheckConsistencyMode mandatory The current check consistency mode setting
for the controller.
Possible values:
1: Not one of the following.
2: Not supported on this controller.
3: Normal check consistency oper… | column | Enumeration | .1.3.6.1.4.1.674.10892.2.6.1.20.130.1.1.70 |
| controllerCopyBackMode mandatory The current copy back mode setting
for the controller.
Possible values:
1: Not one of the following.
2: Not supported on this controller.
3: Disks assigned as spares could revert… | column | Enumeration | .1.3.6.1.4.1.674.10892.2.6.1.20.130.1.1.71 |
| controllerSecurityStatus mandatory The controller's current security/encryption status..
Possible values:
1: The current status could not be determined.
2: Controller is not operating in an encryption mode.
3: Cont… | column | Enumeration | .1.3.6.1.4.1.674.10892.2.6.1.20.130.1.1.72 |
| controllerEncryptionKeyPresent mandatory Indicates whether encryption key is assigned for the controller. | column | BooleanType | .1.3.6.1.4.1.674.10892.2.6.1.20.130.1.1.73 |
| controllerEncryptionCapability mandatory The type of encryption supported by the controller.
Possible values:
1: Not one of the following.
2: No encryption supported,
3: Local Key Management, | column | Enumeration | .1.3.6.1.4.1.674.10892.2.6.1.20.130.1.1.74 |
| controllerLoadBalanceSetting mandatory The ability of the controller to automatically use both
controller ports (or connectors) connected to the same enclosure in
order to route I/O requests.
Possible values:
1: Not … | column | Enumeration | .1.3.6.1.4.1.674.10892.2.6.1.20.130.1.1.75 |
| controllerMaxCapSpeed mandatory The maximum speed of the controller.in
Gigbits per second (Gbps).
Possible values:
1: The speed could not be determined.
2. 1.5 Gbps
3: 3.0 Gbps
4: 6.0 Gbps
5: 12.0 Gbps | column | Enumeration | .1.3.6.1.4.1.674.10892.2.6.1.20.130.1.1.76 |
| controllerSASAddress mandatory The SAS address of the controller. | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.674.10892.2.6.1.20.130.1.1.77 |
| controllerFQDD mandatory The controller's Fully Qualified Device Descriptor (FQDD) as
represented in Storage Management. | column | FQDDString | .1.3.6.1.4.1.674.10892.2.6.1.20.130.1.1.78 |
| controllerDisplayName mandatory The controller's friendly FQDD as represented in Storage
Management. | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.674.10892.2.6.1.20.130.1.1.79 |
| controllerFWVersion mandatory The controller's current firmware version. | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.674.10892.2.6.1.20.130.1.1.8 |
| controllerT10PICapability mandatory Indicates whether the controller supports the T10 PI (Protection
Information). These protection fields are known as DIF
(Data Integrity Fields).
Possible values:
1: Not one of th… | column | Enumeration | .1.3.6.1.4.1.674.10892.2.6.1.20.130.1.1.80 |
| controllerEnhancedAutoImportForeignConfigMode mandatory Indicates the status of enhanced auto-import of foreign
configuration property of the controller.
1: Not one of the following.
2: Not Supported.
3: Disabled.
4: Enabled. | column | Enumeration | .1.3.6.1.4.1.674.10892.2.6.1.20.130.1.1.82 |
| controllerBootModeSupported mandatory Indicates whether headless boot mode settings are supported
on the controller. | column | BooleanType | .1.3.6.1.4.1.674.10892.2.6.1.20.130.1.1.83 |
| controllerBootMode mandatory Indicates the boot mode of the controller.
Possible values:
1: Not applicable for this controller.
2: User mode: User interaction required for all boot messages (not
applicable f… | column | Enumeration | .1.3.6.1.4.1.674.10892.2.6.1.20.130.1.1.84 |
| controllerHighAvailabilityMode mandatory Indicates the fault-tolerant mode of the controller.
Possible values:
1: None
2: Fault Tolerant(Active/Passive)
3: Fault Tolerant(Active/Active)
4: Degraded | column | Enumeration | .1.3.6.1.4.1.674.10892.2.6.1.20.130.1.1.85 |
| controllerPeerController mandatory The peer controller's Fully Qualified Device Descriptor (FQDD) as
represented in Storage Management. | column | FQDDString | .1.3.6.1.4.1.674.10892.2.6.1.20.130.1.1.86 |
| controllerEncryptionKeyIdentifier mandatory Displays the encryption security key identifier of the controller, if the
controller is encryption enabled and a security key is configured for the
controller. | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.674.10892.2.6.1.20.130.1.1.87 |
| controllerCacheSizeInMB mandatory The controller's current amount of cache memory in megabytes. | column | Integer32 | .1.3.6.1.4.1.674.10892.2.6.1.20.130.1.1.9 |