CTRON-SFPS-PORT-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
4
Rows
4
Columns
60

sfpsInPortConfigTable

table mandatory
.1.3.6.1.4.1.52.4.2.4.2.1.2.1.1 · 1 row entry · 20 columns
Open in standard view 
This table contains the configuration information of each
configured inbound SFPS switch port.  If SFPS is not
configured on a port, than an entry will not exist.
sfpsInPortConfigEntry entry .1.3.6.1.4.1.52.4.2.4.2.1.2.1.1.1
Each entry specifies the SFPS configuration for the SFPS
inbound switch port for which the entry exists.
Indexes
sfpsInPortConfigPort
Column Syntax OID
sfpsInPortConfigPort mandatory
The primary index to the SFPS in port table. This identifies
the inbound SFPS switch port for which the entry exists.
SfpsSwitchPort
Textual Convention: SfpsSwitchPort Integer32
 .1.3.6.1.4.1.52.4.2.4.2.1.2.1.1.1.1
sfpsInPortConfigAdminStatus mandatory
Sets the administrative state of the SFPS inbound switch port
for which the entry exists.
Enumerationr/w
Enumerated Values:
1other
2disabled
3enabled
4loopback
 .1.3.6.1.4.1.52.4.2.4.2.1.2.1.1.1.2
sfpsInPortConfigOperStatus mandatory
Indicates the current operating condition of the SFPS
on the inbound switch port for which this entry exists.
Enumeration
Enumerated Values:
1other
2disabled
3enabled
4pending-disable
5pending-enable
6invalid-config
7testing
 .1.3.6.1.4.1.52.4.2.4.2.1.2.1.1.1.3
sfpsInPortConfigOperTime mandatory
Indicates the elapsed time, in hundredths of a second,
that sfpsInPortOperStatus has been in its current
operational state on the SFPS inbound switch port for which
this entry exists.
RFC1155-SMITimeTicks
Textual Convention: RFC1155-SMITimeTicks Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52.4.2.4.2.1.2.1.1.1.4
sfpsInPortConfigType mandatory
Sets the type of port access attribute for the inbound SFPS
port for which the entry exists. Access ports allow single
user or shared access and perform statisics and control;
network ports are equivalent to trunk port…
Enumerationr/w
Enumerated Values:
1other
2access-port
3network-port
4host-mgmt-port
5host-ctl-port
6unknown
7going-to-access
8hybrid-port
9stand-by
10network-only
11accessOnly
12raPrimary
13uplink
14fclStandby
15loopStandby
16raStandby
17flood
18uplinkFlood
19downlinkFlood
20unknown-ra-standby
 .1.3.6.1.4.1.52.4.2.4.2.1.2.1.1.1.5
sfpsInPortConfigReservedBW mandatory
Sets the amount of Bandwidth that is reserved for the inbound
SFPS port for which this entry exists. This bandwidth is
set aside for this port and may be given to another port if
unused.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.2.4.2.1.2.1.1.1.6
sfpsInPortConfigAllocBW mandatory
Sets the amount of Bandwidth that is allocated for
the inbound SFPS port for which this entry exists.
This bandwidth may be less than the reserved
bandwidth.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.2.4.2.1.2.1.1.1.7
sfpsInPortConfigQoS mandatory
Sets the desired QoS service class for the inbound
SFPS port for which this entry exists.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.2.4.2.1.2.1.1.1.8
sfpsInPortConfigQSize mandatory
Indicates the maximum inbound queue size for this port.
Size is indicated in packets (packet descriptors).
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.2.4.2.1.2.1.1.1.9
sfpsInPortConfigQLen mandatory
Indicates the actual inbound queue size for this port.
Size is indicated in packets (packet descriptors). This
is a transient value that reflects the current depth of
queue.
RFC1155-SMIGauge
Textual Convention: RFC1155-SMIGauge Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52.4.2.4.2.1.2.1.1.1.10
sfpsInPortConfigSwitchId mandatory
This entry is the id of the port.
OctetString .1.3.6.1.4.1.52.4.2.4.2.1.2.1.1.1.11
sfpsInPortConfigMediaType mandatory Enumeration
Enumerated Values:
1ethernet
2fddi
3atm-lec
4token-ring
5wan
6inb
7hcp
8hdp
9atm-svc
10atm-pvc
11unknown
12atm-forum-lec
13atm-forum-pvc
14atm-forum-svc
 .1.3.6.1.4.1.52.4.2.4.2.1.2.1.1.1.12
sfpsInPortConfigFrontPanelPort mandatory
This represents the front panel physical port number
SfpsSwitchPort
Textual Convention: SfpsSwitchPort Integer32
 .1.3.6.1.4.1.52.4.2.4.2.1.2.1.1.1.13
sfpsInPortConfigLinkStatus mandatory
The link status of this port.
Enumeration
Enumerated Values:
1other
2linkUp
3linkDown
4link-N-A
 .1.3.6.1.4.1.52.4.2.4.2.1.2.1.1.1.14
sfpsInPortConfigLinkStateAge mandatory
Number of time ticks that link has been in this state.
RFC1155-SMITimeTicks
Textual Convention: RFC1155-SMITimeTicks Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52.4.2.4.2.1.2.1.1.1.15
sfpsInPortConfigRouterPort mandatory
Specifies whether this port is a router port.
Enumeration
Enumerated Values:
1other
2router-port
3no-router
 .1.3.6.1.4.1.52.4.2.4.2.1.2.1.1.1.16
sfpsInPortConfigSlotNumber mandatory
Slot number in the chassis.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.2.4.2.1.2.1.1.1.17
sfpsInPortConfigMib2PortId mandatory
Mib2 Port id
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.2.4.2.1.2.1.1.1.18
sfpsInPortConfigTopoAgent mandatory
Topology Agent
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.52.4.2.4.2.1.2.1.1.1.19
sfpsInPortConfigLayer3Learning mandatory
Topology Agent
Enumeration
Enumerated Values:
1other
2enabled
3disabled
 .1.3.6.1.4.1.52.4.2.4.2.1.2.1.1.1.22

sfpsOutPortConfigTable

table mandatory
.1.3.6.1.4.1.52.4.2.4.2.1.2.1.2 · 1 row entry · 18 columns
Open in standard view 
This table contains the configuration information of each
configured outbound SFPS switch port.  If SFPS is not
configured on a port, than an entry will not exist.
sfpsOutPortConfigEntry entry .1.3.6.1.4.1.52.4.2.4.2.1.2.1.2.1
Each entry specifies the SFPS configuration for the SFPS
outbound switch port for which the entry exists.
Indexes
sfpsOutPortConfigPort
Column Syntax OID
sfpsOutPortConfigPort mandatory
The primary index to the SFPS in port table. This identifies
the outbound SFPS switch port for which the entry exists.
SfpsSwitchPort
Textual Convention: SfpsSwitchPort Integer32
 .1.3.6.1.4.1.52.4.2.4.2.1.2.1.2.1.1
sfpsOutPortConfigAdminStatus mandatory
Sets the administrative state of the SFPS outbound switch port
for which the entry exists.
Enumerationr/w
Enumerated Values:
1other
2disabled
3enabled
4loopback
 .1.3.6.1.4.1.52.4.2.4.2.1.2.1.2.1.2
sfpsOutPortConfigOperStatus mandatory
Indicates the current operating condition of the SFPS
on the outbound switch port for which this entry exists.
Enumeration
Enumerated Values:
1other
2disabled
3enabled
4pending-disable
5pending-enable
6invalid-config
7testing
 .1.3.6.1.4.1.52.4.2.4.2.1.2.1.2.1.3
sfpsOutPortConfigOperTime mandatory
Indicates the elapsed time, in hundredths of a second,
that sfpsOutPortOperStatus has been in its current
operational state on the SFPS outbound switch port for which
this entry exists.
RFC1155-SMITimeTicks
Textual Convention: RFC1155-SMITimeTicks Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52.4.2.4.2.1.2.1.2.1.4
sfpsOutPortConfigType mandatory
Sets the type of port access attribute for the outbound SFPS
port for which the entry exists. Access ports allow single
user or shared access and perform statisics and control;
network ports are equivalent to trunk por…
Enumerationr/w
Enumerated Values:
1other
2access-port
3network-port
4host-mgmt-port
5host-ctl-port
6unknown
7going-to-access
8hybrid-port
9stand-by
10network-only
11accessOnly
12raPrimary
13standbyFCLConflict
14standbyLoopedPort
15standbyVersionConflict
16standbyRANonPrimary
17flood
18uplinkFlood
19downlinkFlood
20unknown-ra-standby
 .1.3.6.1.4.1.52.4.2.4.2.1.2.1.2.1.5
sfpsOutPortConfigReservedBW mandatory
Sets the amount of Bandwidth that is reserved for the outbound
SFPS port for which this entry exists. This bandwidth is
set aside for this port and may be given to another port if
unused.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.2.4.2.1.2.1.2.1.6
sfpsOutPortConfigAllocBW mandatory
Sets the amount of Bandwidth that is allocated for
the outbound SFPS port for which this entry exists.
This bandwidth may be less than the reserved
bandwidth.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.2.4.2.1.2.1.2.1.7
sfpsOutPortConfigQoS mandatory
Sets the desired QoS service class for the outbound
SFPS port for which this entry exists.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.2.4.2.1.2.1.2.1.8
sfpsOutPortConfigQSize mandatory
Indicates the maximum outbound queue size for this port.
Size is indicated in packets (packet descriptors).
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.2.4.2.1.2.1.2.1.9
sfpsOutPortConfigQLen mandatory
Indicates the actual outbound queue size for this port.
Size is indicated in packets (packet descriptors). This
is a transient value that reflects the current depth of
queue.
RFC1155-SMIGauge
Textual Convention: RFC1155-SMIGauge Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52.4.2.4.2.1.2.1.2.1.10
sfpsOutPortConfigSwitchId mandatory
This entry is id of the port.
OctetString .1.3.6.1.4.1.52.4.2.4.2.1.2.1.2.1.11
sfpsOutPortConfigMediaType mandatory Enumeration
Enumerated Values:
1ethernet
2fddi
3atm-lec
4token-ring
5wan
6inb
7hcp
8hdp
9atm-encap
10atm-pvc
11unknown
12atm-forum-lec
13atm-forum-pvc
14atm-forum-svc
 .1.3.6.1.4.1.52.4.2.4.2.1.2.1.2.1.12
sfpsOutPortConfigFrontPanelPort mandatory SfpsSwitchPort
Textual Convention: SfpsSwitchPort Integer32
 .1.3.6.1.4.1.52.4.2.4.2.1.2.1.2.1.13
sfpsOutPortConfigLinkStatus mandatory
The link status of this port.
Enumeration
Enumerated Values:
1other
2linkUp
3linkDown
4linkNA
 .1.3.6.1.4.1.52.4.2.4.2.1.2.1.2.1.14
sfpsOutPortConfigLinkStateAge mandatory
Number of time ticks that link has been in this state.
RFC1155-SMITimeTicks
Textual Convention: RFC1155-SMITimeTicks Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52.4.2.4.2.1.2.1.2.1.15
sfpsOutPortConfigRouterPort mandatory
Specifies whether this port is a router port.
Enumeration
Enumerated Values:
1other
2router-port
3no-router
 .1.3.6.1.4.1.52.4.2.4.2.1.2.1.2.1.16
sfpsOutPortConfigSlotNumber mandatory
Slot number in the chassis.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.2.4.2.1.2.1.2.1.17
sfpsOutPortConfigMib2PortId mandatory
Mib2 Port id
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.2.4.2.1.2.1.2.1.18

sfpsInPortStatsTable

table mandatory
.1.3.6.1.4.1.52.4.2.4.2.1.2.2.1 · 1 row entry · 11 columns
Open in standard view 
This table contains the packet and byte counters for each
inbound SFPS switch port.
sfpsInPortStatsEntry entry .1.3.6.1.4.1.52.4.2.4.2.1.2.2.1.1
Specifies the SFPS packet and byte counters for the
inbound SFPS switch port for which this entry exists.
Indexes
sfpsInPortStatsPort
Column Syntax OID
sfpsInPortStatsPort mandatory
The primary index to the SFPS port table. This identifies
the SFPS inbound switch port for which the entry exists.
SfpsSwitchPort
Textual Convention: SfpsSwitchPort Integer32
 .1.3.6.1.4.1.52.4.2.4.2.1.2.2.1.1.1
sfpsInPortStatsAdminStatus mandatory
Sets the administrative state of the SFPS packet and byte
counters on the inbound SFPS switch port for which this entry
exists.
Enumerationr/w
Enumerated Values:
1other
2disabled
3enabled
 .1.3.6.1.4.1.52.4.2.4.2.1.2.2.1.1.2
sfpsInPortStatsReset mandatory
Resets the SFPS packet and byte counters on the inbound SFPS
switch port for which this entry exists.
Enumerationr/w
Enumerated Values:
1other
2reset
 .1.3.6.1.4.1.52.4.2.4.2.1.2.2.1.1.3
sfpsInPortStatsOperTime mandatory
Indicates the amount of time (# of time ticks) that the
port-specific SFPS packet and byte counters have been
active on the inbound SFPS switch port for which this entry
exists.
RFC1155-SMITimeTicks
Textual Convention: RFC1155-SMITimeTicks Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52.4.2.4.2.1.2.2.1.1.4
sfpsInPortStatsPkts mandatory
Indicates the total number of SFPS packets that have been
received, during sfpsInPortStatsOpertime, on the inbound
SFPS switch port for which this entry exists.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52.4.2.4.2.1.2.2.1.1.5
sfpsInPortStatsDiscardPkts mandatory
Indicates the total number of SFPS packets that have been
discarded (dropped), during sfpsInPortStatsOpertime, on the
inbound SFPS switch port for which this entry exists
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52.4.2.4.2.1.2.2.1.1.6
sfpsInPortStatsBytes mandatory
Indicates the total number of SFPS bytes that have been
received, during sfpsInPortStatsOperTime, on the inbound
SFPS switch port for which the entry exists.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52.4.2.4.2.1.2.2.1.1.7
sfpsInPortStatsDiscardBytes mandatory
Indicates the total number of bytes in the SFPS packets
that have been discarded (dropped), during
sfpsInPortStatsOperTime, on the inbound SFPS switch port for
which the entry exists.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52.4.2.4.2.1.2.2.1.1.8
sfpsInPortStatsQOverflows mandatory
Indicates the total number of queue overflow conditions
have been experienced for the inbound SFPS switch port
for which the entry exists.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52.4.2.4.2.1.2.2.1.1.9
sfpsInPortStatsLinkUps mandatory
The number of link ups that this port has seen.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52.4.2.4.2.1.2.2.1.1.10
sfpsInPortStatsLinkDowns mandatory
The number of link downs that this port has seen.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52.4.2.4.2.1.2.2.1.1.11

sfpsOutPortStatsTable

table mandatory
.1.3.6.1.4.1.52.4.2.4.2.1.2.2.2 · 1 row entry · 11 columns
Open in standard view 
This table contains the packet and byte counters for each
outbound SFPS switch port.
sfpsOutPortStatsEntry entry .1.3.6.1.4.1.52.4.2.4.2.1.2.2.2.1
Specifies the SFPS packet and byte counters for the
outbound SFPS switch port for which this entry exists.
Indexes
sfpsOutPortStatsPort
Column Syntax OID
sfpsOutPortStatsPort mandatory
The primary index to the SFPS port table. This identifies
the SFPS outbound switch port for which the entry exists.
SfpsSwitchPort
Textual Convention: SfpsSwitchPort Integer32
 .1.3.6.1.4.1.52.4.2.4.2.1.2.2.2.1.1
sfpsOutPortStatsAdminStatus mandatory
Sets the administrative state of the SFPS packet and byte
counters on the outbound SFPS switch port for which this entry
exists.
Enumerationr/w
Enumerated Values:
1other
2disabled
3enabled
 .1.3.6.1.4.1.52.4.2.4.2.1.2.2.2.1.2
sfpsOutPortStatsReset mandatory
Resets the SFPS packet and byte counters on the outbound SFPS
switch port for which this entry exists.
Enumerationr/w
Enumerated Values:
1other
2reset
 .1.3.6.1.4.1.52.4.2.4.2.1.2.2.2.1.3
sfpsOutPortStatsOperTime mandatory
Indicates the amount of time (# of time ticks) that the
port-specific SFPS packet and byte counters have been
active on the outbound SFPS switch port for which this entry
exists.
RFC1155-SMITimeTicks
Textual Convention: RFC1155-SMITimeTicks Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52.4.2.4.2.1.2.2.2.1.4
sfpsOutPortStatsPkts mandatory
Indicates the total number of SFPS packets that have been
received, during sfpsOutPortStatsOpertime, on the outbound
SFPS switch port for which this entry exists.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52.4.2.4.2.1.2.2.2.1.5
sfpsOutPortStatsDiscardPkts mandatory
Indicates the total number of SFPS packets that have been
discarded (dropped), during sfpsOutPortStatsOpertime, on the
outbound SFPS switch port for which this entry exists
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52.4.2.4.2.1.2.2.2.1.6
sfpsOutPortStatsBytes mandatory
Indicates the total number of SFPS bytes that have been
received, during sfpsOutPortStatsOperTime, on the outbound
SFPS switch port for which the entry exists.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52.4.2.4.2.1.2.2.2.1.7
sfpsOutPortStatsDiscardBytes mandatory
Indicates the total number of bytes in the SFPS packets
that have been discarded (dropped), during
sfpsOutPortStatsOperTime, on the outbound SFPS switch port for
which the entry exists.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52.4.2.4.2.1.2.2.2.1.8
sfpsOutPortStatsQOverflows mandatory
Indicates the total number of queue overflow conditions
have been experienced for the outbound SFPS switch port
for which the entry exists.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52.4.2.4.2.1.2.2.2.1.9
sfpsOutPortStatsLinkUps mandatory
The number of link ups that this port has seen.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52.4.2.4.2.1.2.2.2.1.10
sfpsOutPortStatsLinkDowns mandatory
The number of link downs that this port has seen.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52.4.2.4.2.1.2.2.2.1.11