sfpsInPortConfigType
CTRON-SFPS-PORT-MIB ·
.1.3.6.1.4.1.52.4.2.4.2.1.2.1.1.1.5
Object
column
mandatory
r/w
Enumeration
Sets the type of port access attribute for the inbound SFPS port for which the entry exists. Access ports allow single user or shared access and perform statisics and control; network ports are equivalent to trunk ports with no access control; host management port indicates the (virtual) port to which the (internal) management agent is attached; host control port indicates the port to redirect non-management packets.
Context
- MIB
- CTRON-SFPS-PORT-MIB
- OID
.1.3.6.1.4.1.52.4.2.4.2.1.2.1.1.1.5- Type
- column
- Access
- readwrite
- Status
- mandatory
- Parent
- sfpsInPortConfigEntry
- Table
- sfpsInPortConfigTable
- Siblings
- 19
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | other |
2 | access-port |
3 | network-port |
4 | host-mgmt-port |
5 | host-ctl-port |
6 | unknown |
7 | going-to-access |
8 | hybrid-port |
9 | stand-by |
10 | network-only |
11 | accessOnly |
12 | raPrimary |
13 | uplink |
14 | fclStandby |
15 | loopStandby |
16 | raStandby |
17 | flood |
18 | uplinkFlood |
19 | downlinkFlood |
20 | unknown-ra-standby |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| sfpsInPortConfigPort mandatory The primary index to the SFPS in port table. This identifies
the inbound SFPS switch port for which the entry exists. | column | SfpsSwitchPort | .1.3.6.1.4.1.52.4.2.4.2.1.2.1.1.1.1 |
| sfpsInPortConfigQLen mandatory Indicates the actual inbound queue size for this port.
Size is indicated in packets (packet descriptors). This
is a transient value that reflects the current depth of
queue. | column | RFC1155-SMIGauge | .1.3.6.1.4.1.52.4.2.4.2.1.2.1.1.1.10 |
| sfpsInPortConfigSwitchId mandatory This entry is the id of the port. | column | OctetString | .1.3.6.1.4.1.52.4.2.4.2.1.2.1.1.1.11 |
| sfpsInPortConfigMediaType mandatory | column | Enumeration | .1.3.6.1.4.1.52.4.2.4.2.1.2.1.1.1.12 |
| sfpsInPortConfigFrontPanelPort mandatory This represents the front panel physical port number | column | SfpsSwitchPort | .1.3.6.1.4.1.52.4.2.4.2.1.2.1.1.1.13 |
| sfpsInPortConfigLinkStatus mandatory The link status of this port. | column | Enumeration | .1.3.6.1.4.1.52.4.2.4.2.1.2.1.1.1.14 |
| sfpsInPortConfigLinkStateAge mandatory Number of time ticks that link has been in this state. | column | RFC1155-SMITimeTicks | .1.3.6.1.4.1.52.4.2.4.2.1.2.1.1.1.15 |
| sfpsInPortConfigRouterPort mandatory Specifies whether this port is a router port. | column | Enumeration | .1.3.6.1.4.1.52.4.2.4.2.1.2.1.1.1.16 |
| sfpsInPortConfigSlotNumber mandatory Slot number in the chassis. | column | Integer32 | .1.3.6.1.4.1.52.4.2.4.2.1.2.1.1.1.17 |
| sfpsInPortConfigMib2PortId mandatory Mib2 Port id | column | Integer32 | .1.3.6.1.4.1.52.4.2.4.2.1.2.1.1.1.18 |
| sfpsInPortConfigTopoAgent mandatory Topology Agent | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.52.4.2.4.2.1.2.1.1.1.19 |
| sfpsInPortConfigAdminStatus mandatory Sets the administrative state of the SFPS inbound switch port
for which the entry exists. | column | Enumeration | .1.3.6.1.4.1.52.4.2.4.2.1.2.1.1.1.2 |
| sfpsInPortConfigLayer3Learning mandatory Topology Agent | column | Enumeration | .1.3.6.1.4.1.52.4.2.4.2.1.2.1.1.1.22 |
| sfpsInPortConfigOperStatus mandatory Indicates the current operating condition of the SFPS
on the inbound switch port for which this entry exists. | column | Enumeration | .1.3.6.1.4.1.52.4.2.4.2.1.2.1.1.1.3 |
| sfpsInPortConfigOperTime mandatory Indicates the elapsed time, in hundredths of a second,
that sfpsInPortOperStatus has been in its current
operational state on the SFPS inbound switch port for which
this entry exi… | column | RFC1155-SMITimeTicks | .1.3.6.1.4.1.52.4.2.4.2.1.2.1.1.1.4 |
| sfpsInPortConfigReservedBW mandatory Sets the amount of Bandwidth that is reserved for the inbound
SFPS port for which this entry exists. This bandwidth is
set aside for this port and may be given to another port if… | column | Integer32 | .1.3.6.1.4.1.52.4.2.4.2.1.2.1.1.1.6 |
| sfpsInPortConfigAllocBW mandatory Sets the amount of Bandwidth that is allocated for
the inbound SFPS port for which this entry exists.
This bandwidth may be less than the reserved
bandwidth. | column | Integer32 | .1.3.6.1.4.1.52.4.2.4.2.1.2.1.1.1.7 |
| sfpsInPortConfigQoS mandatory Sets the desired QoS service class for the inbound
SFPS port for which this entry exists. | column | Integer32 | .1.3.6.1.4.1.52.4.2.4.2.1.2.1.1.1.8 |
| sfpsInPortConfigQSize mandatory Indicates the maximum inbound queue size for this port.
Size is indicated in packets (packet descriptors). | column | Integer32 | .1.3.6.1.4.1.52.4.2.4.2.1.2.1.1.1.9 |