sfpsOutPortConfigType
CTRON-SFPS-PORT-MIB ·
.1.3.6.1.4.1.52.4.2.4.2.1.2.1.2.1.5
Object
column
mandatory
r/w
Enumeration
Sets the type of port access attribute for the outbound SFPS port for which the entry exists. Access ports allow single user or shared access and perform statisics and control; network ports are equivalent to trunk ports with no access control; host management port indicates the (virtual) port to which the (internal) management agent is attached; host control port indicates the port to redirect non-management packets.
Context
- MIB
- CTRON-SFPS-PORT-MIB
- OID
.1.3.6.1.4.1.52.4.2.4.2.1.2.1.2.1.5- Type
- column
- Access
- readwrite
- Status
- mandatory
- Parent
- sfpsOutPortConfigEntry
- Table
- sfpsOutPortConfigTable
- Siblings
- 17
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | other |
2 | access-port |
3 | network-port |
4 | host-mgmt-port |
5 | host-ctl-port |
6 | unknown |
7 | going-to-access |
8 | hybrid-port |
9 | stand-by |
10 | network-only |
11 | accessOnly |
12 | raPrimary |
13 | standbyFCLConflict |
14 | standbyLoopedPort |
15 | standbyVersionConflict |
16 | standbyRANonPrimary |
17 | flood |
18 | uplinkFlood |
19 | downlinkFlood |
20 | unknown-ra-standby |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| sfpsOutPortConfigPort mandatory The primary index to the SFPS in port table. This identifies
the outbound SFPS switch port for which the entry exists. | column | SfpsSwitchPort | .1.3.6.1.4.1.52.4.2.4.2.1.2.1.2.1.1 |
| sfpsOutPortConfigQLen mandatory Indicates the actual outbound queue size for this port.
Size is indicated in packets (packet descriptors). This
is a transient value that reflects the current depth of
queue. | column | RFC1155-SMIGauge | .1.3.6.1.4.1.52.4.2.4.2.1.2.1.2.1.10 |
| sfpsOutPortConfigSwitchId mandatory This entry is id of the port. | column | OctetString | .1.3.6.1.4.1.52.4.2.4.2.1.2.1.2.1.11 |
| sfpsOutPortConfigMediaType mandatory | column | Enumeration | .1.3.6.1.4.1.52.4.2.4.2.1.2.1.2.1.12 |
| sfpsOutPortConfigFrontPanelPort mandatory | column | SfpsSwitchPort | .1.3.6.1.4.1.52.4.2.4.2.1.2.1.2.1.13 |
| sfpsOutPortConfigLinkStatus mandatory The link status of this port. | column | Enumeration | .1.3.6.1.4.1.52.4.2.4.2.1.2.1.2.1.14 |
| sfpsOutPortConfigLinkStateAge mandatory Number of time ticks that link has been in this state. | column | RFC1155-SMITimeTicks | .1.3.6.1.4.1.52.4.2.4.2.1.2.1.2.1.15 |
| sfpsOutPortConfigRouterPort mandatory Specifies whether this port is a router port. | column | Enumeration | .1.3.6.1.4.1.52.4.2.4.2.1.2.1.2.1.16 |
| sfpsOutPortConfigSlotNumber mandatory Slot number in the chassis. | column | Integer32 | .1.3.6.1.4.1.52.4.2.4.2.1.2.1.2.1.17 |
| sfpsOutPortConfigMib2PortId mandatory Mib2 Port id | column | Integer32 | .1.3.6.1.4.1.52.4.2.4.2.1.2.1.2.1.18 |
| sfpsOutPortConfigAdminStatus mandatory Sets the administrative state of the SFPS outbound switch port
for which the entry exists. | column | Enumeration | .1.3.6.1.4.1.52.4.2.4.2.1.2.1.2.1.2 |
| sfpsOutPortConfigOperStatus mandatory Indicates the current operating condition of the SFPS
on the outbound switch port for which this entry exists. | column | Enumeration | .1.3.6.1.4.1.52.4.2.4.2.1.2.1.2.1.3 |
| sfpsOutPortConfigOperTime mandatory Indicates the elapsed time, in hundredths of a second,
that sfpsOutPortOperStatus has been in its current
operational state on the SFPS outbound switch port for which
this entry e… | column | RFC1155-SMITimeTicks | .1.3.6.1.4.1.52.4.2.4.2.1.2.1.2.1.4 |
| sfpsOutPortConfigReservedBW mandatory Sets the amount of Bandwidth that is reserved for the outbound
SFPS port for which this entry exists. This bandwidth is
set aside for this port and may be given to another port i… | column | Integer32 | .1.3.6.1.4.1.52.4.2.4.2.1.2.1.2.1.6 |
| sfpsOutPortConfigAllocBW mandatory Sets the amount of Bandwidth that is allocated for
the outbound SFPS port for which this entry exists.
This bandwidth may be less than the reserved
bandwidth. | column | Integer32 | .1.3.6.1.4.1.52.4.2.4.2.1.2.1.2.1.7 |
| sfpsOutPortConfigQoS mandatory Sets the desired QoS service class for the outbound
SFPS port for which this entry exists. | column | Integer32 | .1.3.6.1.4.1.52.4.2.4.2.1.2.1.2.1.8 |
| sfpsOutPortConfigQSize mandatory Indicates the maximum outbound queue size for this port.
Size is indicated in packets (packet descriptors). | column | Integer32 | .1.3.6.1.4.1.52.4.2.4.2.1.2.1.2.1.9 |