CTRON-REMOTE-ACCESS-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
20
Rows
20
Columns
138

ctRemPhysPortTable

table mandatory
.1.3.6.1.4.1.52.4.1.2.7.2.1.2 · 1 row entry · 10 columns
Open in standard view 
A list of the descriptions of the physical remote access
ports of this platform.
ctRemPhysPortEntry entry .1.3.6.1.4.1.52.4.1.2.7.2.1.2.1
A physical port entry. It contains objects relating to a
given physical remote access port
Indexes
ctRemConnectionIndex
Column Syntax OID
ctRemConnectionIndex mandatory
A value indicating the remote connection this entry
is located on.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.1.2.7.2.1.2.1.1
ctRemPhysPortType mandatory
The type of physical port that this entry describes. None
indicates that the physical port has no connector.
Enumeration
Enumerated Values:
1none
2t1
3e1
4synchronous
5dds
6di
7hdsl
8isdnBRI
9ds30
10t1dds
 .1.3.6.1.4.1.52.4.1.2.7.2.1.2.1.2
ctRemPhysPortSpecificMib mandatory
This object identifies an instance of the
index object in the first group of objects in the
MIB specific to the physical port.
ObjectIdentifier .1.3.6.1.4.1.52.4.1.2.7.2.1.2.1.3
ctRemPhysPortProtMgrType mandatory
This object identifies an instance of the type
of Protocol Manager residing on this physical
port. Before a physical port may be used, the type
of manager must be designated. For example, if the
physical port was goin…
Enumerationr/w
Enumerated Values:
1none
2pppNailedUp
3isdnPriPpp
4isdnBriPpp
5frameRelayPvcRtr
6frameRelayPvcSw
7hdlc
 .1.3.6.1.4.1.52.4.1.2.7.2.1.2.1.4
ctRemPhysPortProtMgrIfaceNum mandatory
This object identifies the interface number that
will be assigned to the Protocol Managers IFO
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.1.2.7.2.1.2.1.5
ctRemPhysPortWanIfaceNum mandatory
This object identifies the interface number that
will be assigned to the Wanio's IFO
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.1.2.7.2.1.2.1.6
ctRemPhysPortProtMgrMaxIfos mandatory
This object identifies the maximum number of IFO's
that can be created on this physical interface.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.1.2.7.2.1.2.1.7
ctRemPhysPortProtMgrIfaceList mandatory
This object identifies a list of interfaces that
will be assigned to this Protocol Managers data IFO's
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.52.4.1.2.7.2.1.2.1.8
ctRemPhysAlarmTimeOut mandatory
Whenever the physical port is configured for nailed-up
PPP this object specifies the time the physical port
must remain in a failed state as a condition to begin
the backup procedure. The backup procedure is begun fo…
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.1.2.7.2.1.2.1.9
ctRemPhysWpimType mandatory
This Mib object determines the Mode of operation that
the T1/DDS Wpim module will function as. Setting a value
of 1 will set the mode to DDS, setting a value of 2 will
set the mode to T1.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.1.2.7.2.1.2.1.10

ctRemInterfaceTable

table mandatory
.1.3.6.1.4.1.52.4.1.2.7.2.1.3 · 1 row entry · 12 columns
Open in standard view 
The interface table for Cabletron remote interfaces.
It is a list of items that are pertinant to the interfaces
that are part of remote physical ports. The number of 
entries is dependent upon the total number of remote 
interfaces configured.
ctRemInterfaceEntry entry .1.3.6.1.4.1.52.4.1.2.7.2.1.3.1
A remote interface entry. It
contains objects relating to an interface that is defined
for remote Cabletron products.
Indexes
ctRemIntEntIfIndex
Column Syntax OID
ctRemIntEntIfIndex mandatory
The ifIndex of the interface. This is the index of this
entry in the ifTable.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.1.2.7.2.1.3.1.1
ctRemIntEntCompression mandatory
This flag will indicate whether compression should take
place on this interface.
Enumerationr/w
Enumerated Values:
1on
2off
 .1.3.6.1.4.1.52.4.1.2.7.2.1.3.1.2
ctRemIntEntCompRatio mandatory
This string indicates the current compression ratio
on this interface.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.52.4.1.2.7.2.1.3.1.3
ctRemIntEntCompStatus mandatory
This flag will indicate whether compression has been
nogotiated on this interface.
Enumeration
Enumerated Values:
1on
2off
 .1.3.6.1.4.1.52.4.1.2.7.2.1.3.1.4
ctRemIntEntMTU mandatory
The MTU to be negotiated for this interface. This will
not be updated with the actual MTU, which can be found
in the ifTable.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.1.2.7.2.1.3.1.5
ctRemIntEntCongestion mandatory
This object identifies the Leaky Bucket algorithm flag for
a Frame Relay circuit on this intertface. The option is
supported when this flag is enabled, and not supported
when this flag is disabled.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.52.4.1.2.7.2.1.3.1.6
ctRemIntEntMaxProfiles mandatory
This object specifies the maximum number of neighbor profiles.
A neighbor profile describes a possible connection. The maximum
should be set to account for support of PPP multilink. That is
to say, if PPP multilink is b…
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.1.2.7.2.1.3.1.7
ctRemIntEntTxIdleTimeout mandatory
This object identifies the idle timeout value in which a
packet needs to be transmitted before the interface is
automatically disconnected. Allowed values are in
increments of five seconds including zero.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.1.2.7.2.1.3.1.8
ctRemIntEntRxIdleTimeout mandatory
This object identifies the idle timeout in which a packet
needs to be received before the interface is automatically
disconnected. Allowed values are in increments of five
seconds including zero.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.1.2.7.2.1.3.1.9
ctRemIntEntCircuitName mandatory
This object associates a circuit name with a specific interface.
RFC1213-MIBDisplayStringr/w
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.52.4.1.2.7.2.1.3.1.10
ctRemIntEntEncryption mandatory
This flag will indicate whether encryption should take
place on this interface.
Enumerationr/w
Enumerated Values:
1on
2off
 .1.3.6.1.4.1.52.4.1.2.7.2.1.3.1.11
ctRemIntEntEncryptStatus mandatory
This flag will indicate whether Encryption has been
nogotiated on this interface.
Enumeration
Enumerated Values:
1on
2off
 .1.3.6.1.4.1.52.4.1.2.7.2.1.3.1.12

ctRemPrimaryInterfaceTable

table mandatory
.1.3.6.1.4.1.52.4.1.2.7.2.1.4 · 1 row entry · 2 columns
Open in standard view 
The interface table for Cabletron remote interfaces.
It is a list of items that are pertinant to the interfaces
that are part of remote physical ports. The number of 
entries is dependent upon the total number of remote 
interfaces configured.
ctRemPrimaryInterfaceEntry entry .1.3.6.1.4.1.52.4.1.2.7.2.1.4.1
A remote interface entry. It
contains objects relating to an interface that is defined
for remote Cabletron products.
Indexes
ctRemPriIntEntIfIndex
Column Syntax OID
ctRemPriIntEntIfIndex mandatory
The ifIndex of the interface. This is the index of this
entry in the ifTable.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.1.2.7.2.1.4.1.1
ctRemPriIntEntConnectRetryInterval mandatory
This object specifies the interval in seconds between retries
for restoring the primary interface.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.1.2.7.2.1.4.1.2

ctRemBackupInterfaceTable

table mandatory
.1.3.6.1.4.1.52.4.1.2.7.2.1.5 · 1 row entry · 8 columns
Open in standard view 
The interface table for Cabletron remote interfaces.
It is a list of items that are pertinant to the interfaces
that are part of remote physical ports. The number of 
entries is dependent upon the total number of remote 
interfaces configured.
ctRemBackupInterfaceEntry entry .1.3.6.1.4.1.52.4.1.2.7.2.1.5.1
A remote interface entry. It
contains objects relating to an interface that is defined
for remote Cabletron products.
Indexes
ctRemIntEntBackupIfIndex
Column Syntax OID
ctRemIntEntBackupIfIndex mandatory
The ifIndex of the interface. This is the index of this
entry in the ifTable.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.1.2.7.2.1.5.1.1
ctRemIntEntBackupIfNum mandatory
This object identifies which ifIndex will backup this
interface in the event of a communications failure.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.1.2.7.2.1.5.1.2
ctRemIntEntBackupIfInUseCnt mandatory
This object identifies how many other interfaces this
interface will backup.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.1.2.7.2.1.5.1.3
ctRemIntEntBackupIfTimeToConnect mandatory
This object identifies how long to wait in seconds before
attempting to switchover to the backup interface. Allowed
values are in increments of five seconds including zero.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.1.2.7.2.1.5.1.4
ctRemIntEntBackupIfTimeToDisconnect mandatory
This object identifies how long to wait in seconds before
attempting to switchover to the primary interface. Allowed
values are in increments of five seconds including zero.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.1.2.7.2.1.5.1.5
ctRemIntEntBackupIfOverride mandatory
This object identifies if the interface will switch back to
the primary link after it has become active again. A force
condition will not allow the interface to switch back.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.52.4.1.2.7.2.1.5.1.6
ctRemIntEntBackupConnectRetries mandatory
This object specifies the number of tries to bring-up the
backup interface before giving up.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.1.2.7.2.1.5.1.7
ctRemIntEntBackupConnectRetryInterval mandatory
This object specifies the interval in seconds between retries
for bringing up backup interface before giving up.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.1.2.7.2.1.5.1.8

ctRemExtPhysPortTable

table mandatory
.1.3.6.1.4.1.52.4.1.2.7.2.1.6 · 1 row entry · 8 columns
Open in standard view 
A list of the descriptions of the physical remote access
ports of this platform.
ctRemExtPhysPortEntry entry .1.3.6.1.4.1.52.4.1.2.7.2.1.6.1
A physical port entry. It contains objects relating to a
given physical remote access port
Indexes
ctRemExtConnectionIndex
Column Syntax OID
ctRemExtConnectionIndex mandatory
A value indicating the remote connection this entry
is located on.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.1.2.7.2.1.6.1.1
ctRemExtProtMgrIndex mandatory
A value indicating the protMgr number for this entry.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.1.2.7.2.1.6.1.2
ctRemExtPhysPortProtMgrType mandatory
This object identifies an instance of the type
of Protocol Manager residing on this physical
port. Before a physical port may be used, the type
of manager must be designated. For example, if the
physical port was goin…
Enumerationr/w
Enumerated Values:
1none
2pppNailedUp
3isdnPriPpp
4isdnBriPpp
5frameRelayPvcRtr
6frameRelayPvcSw
7hdlc
 .1.3.6.1.4.1.52.4.1.2.7.2.1.6.1.3
ctRemExtPhysPortProtMgrEnable mandatory
This object identifies an instance of the the
enable flag of Protocol Manager residing on this
physical port.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.52.4.1.2.7.2.1.6.1.4
ctRemExtPhysPortProtMgrIfaceNum mandatory
This object identifies the interface number that
will be assigned to the Protocol Managers IFO
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.1.2.7.2.1.6.1.5
ctRemExtPhysPortProtMgrMaxIfos mandatory
This object identifies the maximum number of IFO's
that can be created on this physical interface.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.1.2.7.2.1.6.1.6
ctRemExtPhysPortProtMgrIfaceList mandatory
This object identifies a list of interfaces that
will be assigned to this Protocol Managers data IFO's
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.52.4.1.2.7.2.1.6.1.7
ctRemExtPhysPortProtMgrChannelList mandatory
This object identifies a list of channles/timeslots
that will be assigned to this Protocol Managers data IFO's
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.52.4.1.2.7.2.1.6.1.8

ctDs1ExtensionsTable

table mandatory
.1.3.6.1.4.1.52.4.1.2.7.2.2.1 · 1 row entry · 18 columns
Open in standard view 
This table is an extension to the standard ds1 configuration
table. It is a list of items that are pertinant to ds1 ports
on a platform. There is one entry per ds1 physical port on
the platform.
ctDs1ExtensionsEntry entry .1.3.6.1.4.1.52.4.1.2.7.2.2.1.1
A ds1 extensions entry containing objects relating to
the particular ds1 physical port.
Indexes
ctDs1ExtensionsEntryIndex
Column Syntax OID
ctDs1ExtensionsEntryIndex mandatory
A unique value for each ds1 physical port on the platform.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.1.2.7.2.2.1.1.1
ctDs1ExtensionsNumInterfaces mandatory
The number of interfaces on this physical port. This
number inidicates the number of entries this physical port
uses in the ifTable.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.1.2.7.2.2.1.1.2
ctDs1ExtensionsToggleFracTable mandatory
Setting this object to 1 will cause the Ds1 Fractional
Table to be updated with the new values, as entered.

Setting this object to 2, will cause the Ds1 Fractional
Table to view as the table being enter…
Enumerationr/w
Enumerated Values:
1update-table
2display-new
3display-old
4restore-old
 .1.3.6.1.4.1.52.4.1.2.7.2.2.1.1.3
ctDs1ExtensionsLineBuildOut mandatory
The line build out setting for this ds1 physical port.
Unknown indicates that the setting is neither readable or
writable.
Enumerationr/w
Enumerated Values:
1unknown
2zero
3minus-7point5
4minus-15
5a133to266feet
6a266to399feet
7a399to533feet
8a533to655feet
 .1.3.6.1.4.1.52.4.1.2.7.2.2.1.1.4
ctDs1ExtensionsCFADuration mandatory
The length of time (in seconds), that the ds1 port will
remain in the Carrier Failure Alarm state after the
alarm condition has cleared. For those Ds1 ports not
supporting Carrier Failure Alarm duration, this object
al…
Integer32r/w
Constraints:
range: 1-15
 .1.3.6.1.4.1.52.4.1.2.7.2.2.1.1.5
ctDs1ExtensionsDIEnable mandatory
Enables or disables Drop and Insert functionality on a
D/I WPIM. If enabled, all zero assigned timeslots will
designate D/I interface channels, if disabled all zero
channels will designate dummy channels as on a T1 o…
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.52.4.1.2.7.2.2.1.1.6
ctDs1ExtensionsTotalValidIntervals mandatory
The number of previous intervals for which
valid data was collected for the DS1 mib, which
is currently RFC1406. This counter is similar to
RFC1406 dsx1ValidIntervals except that the count
represents the total numb…
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52.4.1.2.7.2.2.1.1.7
wanDs1ExtensionsBertTestMode mandatory
This object is used to request that a type of
process be in control of the testing function.
This is used to differentiate between automated test
procedures and those manually controlled by a user.
When read, this ob…
Enumerationr/w
Enumerated Values:
1none
2internal
3manual
 .1.3.6.1.4.1.52.4.1.2.7.2.2.1.1.8
wanDs1ExtensionsBertRun mandatory
Controls the sending of test data over this physical
port. The data is a pattern described by
wanDs1ExtensionsBertTestPattern.
Enumerationr/w
Enumerated Values:
1disabled
2enabled
 .1.3.6.1.4.1.52.4.1.2.7.2.2.1.1.9
wanDs1ExtensionsBertCurrentResults mandatory
Indicates the results of the testing for the
last completed sampling period. A non-negative
number is the error rate in bits per million bits.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.1.2.7.2.2.1.1.10
wanDs1ExtensionsBertCumulativeResults mandatory
Indicates the total number of errors since the
testing was enabled. It is not a rate.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.1.2.7.2.2.1.1.11
wanDs1ExtensionsBertPeakResults mandatory
Indicates the highest value of
wanDs1ExtensionsBertCurrentResults since the testing
was enabled. A non-negative number is the error rate
in bits per million bits.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.1.2.7.2.2.1.1.12
wanDs1ExtensionsBertAverageResult mandatory
Indicates the average value of
wanDs1ExtensionsBertCurrentResults since the testing
was enabled. A non-negative number is the error rate
in bits per million bits.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.1.2.7.2.2.1.1.13
wanDs1ExtensionsBertTestPattern mandatory
This object is used to specify the pattern of the
test data.
Enumerationr/w
Enumerated Values:
1patternOther
2pattern1s
3pattern63
4pattern511
5pattern2047
6pattern3in24
7patternQRSS
 .1.3.6.1.4.1.52.4.1.2.7.2.2.1.1.14
wanDs1ExtensionsBertSamplePeriod mandatory
This object is the duration of time in seconds at
which the current test results will be periodically
written to wanDs1ExtensionsBertCurrentResults. The
range is 1 to 3600, with a default value of 10.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.1.2.7.2.2.1.1.15
wanDs1ExtensionsBertNumPeriods mandatory
The number of sampling periods that have elapsed
during the current test run.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52.4.1.2.7.2.2.1.1.16
wanDs1ExtensionsBertTestTraps mandatory
This object is used to enable or disable the sending
of a trap at the conclusion of the measurement period.
The trap will contain the information described by
ctDs1BertCurrentResults. The default value is disabled.
Enumerationr/w
Enumerated Values:
1disabled
2enabled
 .1.3.6.1.4.1.52.4.1.2.7.2.2.1.1.17
wanDs1ExtensionsBertDataStatus mandatory
This object provides the operating status of the
transmission of test data packets.
Enumeration
Enumerated Values:
1idle
2waitingForLink
3waitingForLoopback
4running
 .1.3.6.1.4.1.52.4.1.2.7.2.2.1.1.18

ctDs1WanDriverTable

table mandatory
.1.3.6.1.4.1.52.4.1.2.7.2.2.2 · 1 row entry · 4 columns
Open in standard view 
This table is an extension to the standard ds1 
configuration table. It is a list of items that are 
pertinant to the hdlc driver on a platform. There is 
one entry per ds1 physical port on the platform.
ctDs1WanDriverEntry entry .1.3.6.1.4.1.52.4.1.2.7.2.2.2.1
A ds1 wan driver entry containing objects relating to
the particular ds1 physical port pertaining to a specific
channel on the wan driver chip.
Indexes
ctDs1WanDriverEntryIndex ctDs1WanDriverChannelIndex
Column Syntax OID
ctDs1WanDriverEntryIndex mandatory
A unique value for each ds1 physical port on the platform.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.1.2.7.2.2.2.1.1
ctDs1WanDriverChannelIndex mandatory
A unique value for each channel on a wan driver on the
platform.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.1.2.7.2.2.2.1.2
ctDs1WanDriverLineCode mandatory
This object controls the individual channels line coding
on a wan driver device on the platform.
Enumerationr/w
Enumerated Values:
1none
2jBZS
3invHDLC
 .1.3.6.1.4.1.52.4.1.2.7.2.2.2.1.3
ctDs1WanDriverCRCBits mandatory
This object controls the individual channels CRC bits
generation on a wan driver device on the platform.
Enumerationr/w
Enumerated Values:
1crc16
2crc32
 .1.3.6.1.4.1.52.4.1.2.7.2.2.2.1.4

ctRs232ExtensionsTable

table mandatory
.1.3.6.1.4.1.52.4.1.2.7.2.3.1 · 1 row entry · 5 columns
Open in standard view 
This table is an extension to the standard rs232-like mib.
It is a list of items that are pertinant to rs232-like ports
on a platform. There is one entry per synchronous physical
port on the platform.
ctRs232ExtensionsEntry entry .1.3.6.1.4.1.52.4.1.2.7.2.3.1.1
A rs232-like extensions entry containing objects relating
to the particular rs232-like physical port.
Indexes
ctRs232ExtensionsEntryIndex
Column Syntax OID
ctRs232ExtensionsEntryIndex mandatory
A unique value for each rs232-like physical port on
the platform.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.1.2.7.2.3.1.1.1
ctRs232ExtensionsCTSEnable mandatory
This object indicates whether the platform should
generate CTS. When disabled the platform will not
generate CTS, when enabled, the platform will generate
CTS. The actual state of the CTS line is available
in the …
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.52.4.1.2.7.2.3.1.1.2
ctRs232ExtensionsDSREnable mandatory
This object indicates whether the platform should
generate DSR. When disabled the platform will not
generate DSR, when enabled, the platform will generate
DSR. The actual state of the DSR line is available
in the r…
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.52.4.1.2.7.2.3.1.1.3
ctRs232ExtensionsRTSEnable mandatory
This object indicates whether the platform should
generate RTS. When disabled the platform will not
generate RTS, when enabled, the platform will generate
RTS. The actual state of the RTS line is available
in the …
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.52.4.1.2.7.2.3.1.1.4
ctRs232ExtensionsDTREnable mandatory
This object indicates whether the platform should
generate DTR. When disabled the platform will not
generate DSR, when enabled, the platform will generate
DTR. The actual state of the DTR line is available
in the r…
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.52.4.1.2.7.2.3.1.1.5

frDcpCircuitTable

table mandatory
.1.3.6.1.4.1.52.4.1.2.7.2.4.1 · 1 row entry · 5 columns
Open in standard view 
A table containing data compression information about 
specific Data Link Connection Identifiers and 
corresponding virtual circuit. This information is used 
to support the frCircuitTable following RFC-1315.
frDcpCircuitEntry entry .1.3.6.1.4.1.52.4.1.2.7.2.4.1.1
The data compression information regarding a single Data
Link Connection Identifier.
Indexes
frDcpCircuitIfIndex frDcpCircuitDlci
Column Syntax OID
frDcpCircuitIfIndex mandatory
The ifIndex value of ifEntry that this DCP virtual
circuit object is layered onto.
Index
Textual Convention: Index Integer32
 .1.3.6.1.4.1.52.4.1.2.7.2.4.1.1.1
frDcpCircuitDlci mandatory
The Data Link Connection Identifier for this DCP virtual
circuit object.
DLCI
Textual Convention: DLCI Integer32
 .1.3.6.1.4.1.52.4.1.2.7.2.4.1.1.2
frDcpCircuitEnable mandatory
Indicates whether data compression should take place on
this particular end side virtual circuit.
Enumerationr/w
Enumerated Values:
1on
2off
 .1.3.6.1.4.1.52.4.1.2.7.2.4.1.1.3
frDcpCircuitStatus mandatory
On indicates that the compression has been successfully
negotiated and is operating. Off indicates that the
compression negotiation has failed and compression is not
operating at this time, or compression has been termi…
Enumeration
Enumerated Values:
1on
2off
 .1.3.6.1.4.1.52.4.1.2.7.2.4.1.1.4
frDcpCircuitRatio mandatory
The ratio of uncompressed to compressed transmitted data.
If the data compression status is off, 1:1 will be
displayed.
OctetString
Constraints:
range: 5-5
 .1.3.6.1.4.1.52.4.1.2.7.2.4.1.1.5

ctDDSConfigTable

table mandatory
.1.3.6.1.4.1.52.4.1.2.7.2.5.1 · 1 row entry · 9 columns
Open in standard view 
The DDS Configuration Table
ctDDSConfigEntry entry .1.3.6.1.4.1.52.4.1.2.7.2.5.1.1
An Entry in the DDS Configuration Table
Indexes
ctDDSLineIndex
Column Syntax OID
ctDDSLineIndex mandatory
A unique value for each ds1 physical port on the
platform.
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.52.4.1.2.7.2.5.1.1.1
ctDDSIfIndex mandatory
Index associated with this dds physical port
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.52.4.1.2.7.2.5.1.1.2
ctDDSLineMode mandatory
DDS-PRI is full duplex 56k link, No framing in loop data
so loop speed is also 56k. Data stream:
--d1 d2 d3 d4 d5 d6 d7--
DDS-SC is also full duplex 56k link, requires framing bits
to distinguish betwee…
Enumerationr/w
Enumerated Values:
1ddsPri
2ddsSc
3ddsCc
 .1.3.6.1.4.1.52.4.1.2.7.2.5.1.1.3
ctDDSLineCoding mandatory
This object describes the variety of Zero Code
suppression on this interface. JBZS refers to Jammed
Bit Zero suppresion, which forces a 1 bit every 8 bit
periods. None refers to a mode in which some other
means is …
Enumerationr/w
Enumerated Values:
1ddsNone
2ddsJBZS
3otherLineCode
 .1.3.6.1.4.1.52.4.1.2.7.2.5.1.1.4
ctDDSLoopbackConfig mandatory
This variable represents the loopback configuration
of the DDS interface. ddsNoLoop means the interface
is not in loopback state, ddsLocalLoop means the signal
is transmitted and looped back to the same interface,
…
Enumerationr/w
Enumerated Values:
1ddsNoLoop
2ddsLocalLoop
3ddsLineLoop
4ddsOtherLoop
 .1.3.6.1.4.1.52.4.1.2.7.2.5.1.1.5
ctDDSLineStatus mandatory
This variable describes the current operational status of
DDS line.
Enumeration
Enumerated Values:
1ddsNoAlarm
2ddsLossOfSignal
3ddsOutOfService
4ddsOutOfFrame
 .1.3.6.1.4.1.52.4.1.2.7.2.5.1.1.6
ctDDSTxClockSource mandatory
The source of Transmit clock.
'ddsLoopTiming' indicates that the recovered receive clock
is used as transmit clock.

'ddsLocalTiming' indicates that a local clock source is
used.

'ddsThroug…
Enumerationr/w
Enumerated Values:
1ddsLoopTiming
2ddsLocalTiming
3ddsThroughTiming
 .1.3.6.1.4.1.52.4.1.2.7.2.5.1.1.7
ctDDSPortInSpeed mandatory
This variable describes the current operational
receive speed of DDS line. It is a read only value
based entirely on DDS type (CC or PRI).
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.1.2.7.2.5.1.1.8
ctDDSPortOutSpeed mandatory
This variable describes the current operational
transmit speed of DDS line. It is a read only value
based entirely on DDS type CC or PRI
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.1.2.7.2.5.1.1.9

ctPppCountersTable

table mandatory
.1.3.6.1.4.1.52.4.1.2.7.2.6.1 · 1 row entry · 5 columns
Open in standard view 
Table containing the parameters for the local
PPP entity related to the counters and timers.
ctPppCountersEntry entry .1.3.6.1.4.1.52.4.1.2.7.2.6.1.1
PPP counter/timer information for a particular
PPP link.
Indexes
ctPppCountersIfIndex
Column Syntax OID
ctPppCountersIfIndex mandatory
The ifIndex of the interface. This is the index of this
entry in the ifTable.
Integer32r/w
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.52.4.1.2.7.2.6.1.1.1
ctPppCountersMaxTerminate mandatory
MaxTerminate indicates the number of Terminate-
Request packets sent without receiving a Terminate-Ack
before assuming that the peer in unable to respond.
Integer32r/w
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.52.4.1.2.7.2.6.1.1.2
ctPppCountersMaxConfigure mandatory
MaxConfigure indicates the number of Configure-
Request packets sent without receiving a Configure-Ack,
Configre-Nak or Configure-Reject before assuming that
the peer in unable to respond.
Integer32r/w
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.52.4.1.2.7.2.6.1.1.3
ctPppCountersMaxFailure mandatory
MaxFailure indicates the number of Configure-Nak
packets sent without sending a Configure-Ack
before assuming that the configuration is not
converging. Any further Configure-Reject packets
for peer requested options ar…
Integer32r/w
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.52.4.1.2.7.2.6.1.1.4
ctPppCountersRestartTimer mandatory
The Restart timer is used to time transmissions
of Configure-Request and Terminate-Request packets.
Expiration of the Restart-Timer causes a Timeout
event, and retransmission of the corresponding
Configure-Request or Te…
Integer32r/w
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.52.4.1.2.7.2.6.1.1.5

ctPppLcpExtTable

table mandatory
.1.3.6.1.4.1.52.4.1.2.7.2.6.2 · 1 row entry · 13 columns
Open in standard view 
Table containing the parameters for the local
PPP entity related to the counters and timers.
ctPppLcpExtEntry entry .1.3.6.1.4.1.52.4.1.2.7.2.6.2.1
PPP LCP configurationinformation for a particular
PPP link.
Indexes
ctPppLcpExtIfIndex
Column Syntax OID
ctPppLcpExtIfIndex mandatory
The ifIndex of the interface. This is the index of this
entry in the ifTable.
Integer32r/w
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.52.4.1.2.7.2.6.2.1.1
ctPppLcpExtAuthenticationProt mandatory
Enables a particular authentication protocol on this
PPP link(now modified for read-only.
Enumeration
Enumerated Values:
1none
2pap
3chap
 .1.3.6.1.4.1.52.4.1.2.7.2.6.2.1.2
ctPppLcpExtQualityProt mandatory
Enables a particular link-quality protocol on this
PPP link.
Enumerationr/w
Enumerated Values:
1none
2lqr
 .1.3.6.1.4.1.52.4.1.2.7.2.6.2.1.3
ctPppLcpExtPFC mandatory
Enables protocol field compression on this PPP link.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.52.4.1.2.7.2.6.2.1.4
ctPppLcpExtACFC mandatory
Enables address and control field compression on this PPP
link.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.52.4.1.2.7.2.6.2.1.5
ctPppLcpExtSelfDescribePadding mandatory
This Configuration Option provides a method for an
implementation to indicate to the peer that it
understands self-describing pads when padding is added
at the end of the PPP Information field.
Integer32r/w
Constraints:
range: 1-256
 .1.3.6.1.4.1.52.4.1.2.7.2.6.2.1.6
ctPppLcpExtCallback mandatory
This Configuration Option provides a method for an
implementation to request a dial-up peer to call back.
Integer32r/w
Constraints:
range: 1-6
 .1.3.6.1.4.1.52.4.1.2.7.2.6.2.1.7
ctPppLcpExtCompoundFrames mandatory
This Configuration Option provides a method for an
implementation to send multiple PPP encapsulated packets
within the same frame.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.52.4.1.2.7.2.6.2.1.8
ctPppLcpExtMru mandatory
Enables and disables Mru status.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.52.4.1.2.7.2.6.2.1.9
ctPppLcpExtAccm mandatory
Enables and disables Accm status.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.52.4.1.2.7.2.6.2.1.10
ctPppLcpExtEchoRequest mandatory
A zero indicated no Echo Request and any other value provides
an interval to send Echo-Requests to the Peer.
The Echo-Request provides a Data Link Layer loopback mechanism
for use in exercising both directions of the li…
Integer32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.52.4.1.2.7.2.6.2.1.11
ctPppLcpExtReplyCounter mandatory
Increments a counter if the Local Device correctly
received an Echo-Reply from the Peer. LCP MUST be
in the OPENED state for an Echo-Reply to occur.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.52.4.1.2.7.2.6.2.1.12
ctPppLcpExtMpCapable mandatory
Multilink Protocol (MP) option selector. Set to a value
of one when MP support is desired otherwise set to a
value of two. The default value is two. When set to two
the attempt is made to negotiate MP support. MP su…
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.52.4.1.2.7.2.6.2.1.13

ctPppBncpExtTable

table mandatory
.1.3.6.1.4.1.52.4.1.2.7.2.6.3 · 1 row entry · 2 columns
Open in standard view 
Table containing the parameters for the local
PPP entity related to the counters and timers.
ctPppBncpExtEntry entry .1.3.6.1.4.1.52.4.1.2.7.2.6.3.1
PPP LCP configuration information for a particular
PPP link.
Indexes
ctPppBncpExtIfIndex
Column Syntax OID
ctPppBncpExtIfIndex mandatory
The ifIndex of the interface. This is the index of this
entry in the ifTable.
Integer32r/w
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.52.4.1.2.7.2.6.3.1.1
ctPppBncpExtCrcStatus mandatory
Enables and disables CRC status. First our platform must
support CRC. If the platform does, then setting to
disabled will not send CRC. The default is enabled,
which sends CRC.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.52.4.1.2.7.2.6.3.1.2

ctPppMpExtTable

table mandatory
.1.3.6.1.4.1.52.4.1.2.7.2.6.4 · 1 row entry · 8 columns
Open in standard view 
Table containing the parameters for the local
PPP entity related to the counters and timers.
ctPppMpExtEntry entry .1.3.6.1.4.1.52.4.1.2.7.2.6.4.1
PPP LCP configurationinformation for a particular
PPP link.
Indexes
ctPppMpExtIfIndex
Column Syntax OID
ctPppMpExtIfIndex mandatory
The ifIndex of the interface. This is the index of this
entry in the ifTable.
Integer32r/w
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.52.4.1.2.7.2.6.4.1.1
ctPppLcpExtMpLUT mandatory
Used to set the Line Utilization Threshold (LUT) % value
to compare against the linear weighted percentage by
which to determine when more/less bandwidth is to be
added/removed. Linear weighting is averaged over the …
Integer32r/w
Constraints:
range: 1-100
 .1.3.6.1.4.1.52.4.1.2.7.2.6.4.1.2
ctPppLcpExtMpHistoryTime mandatory
Used to set the history time value in seconds for the
number of line utilization reading(s) desired to compute
the average line utilization. That is to say, it
specifies the window size over which to compute the
aver…
Integer32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.52.4.1.2.7.2.6.4.1.3
ctPppLcpExtMpMoreBW mandatory
Used to set the number of consecutive line utilization
average readings that must exceed ctPppLcpExtMpLUT as
a condition of when to increase the bandwidth if more
BW is permitted.
Integer32r/w
Constraints:
range: 1-255
 .1.3.6.1.4.1.52.4.1.2.7.2.6.4.1.4
ctPppLcpExtMpLessBW mandatory
Used to set the number of consecutive line utilization
average readings that must fall below ctPppLcpExtMpLUT
as a condition of when to remove possible previously
added bandwidth.
Integer32r/w
Constraints:
range: 1-255
 .1.3.6.1.4.1.52.4.1.2.7.2.6.4.1.5
ctPppLcpExtMpMaxChannels mandatory
Used to set the maxium number of channels an MP capable
connection is allowed.
Integer32r/w
Constraints:
range: 1-255
 .1.3.6.1.4.1.52.4.1.2.7.2.6.4.1.6
ctPppLcpExtMpChannelsToAdd mandatory
Used to set the number of additional channel(s) to
increment by whenever the need for more bandwidth is
determined.
Integer32r/w
Constraints:
range: 1-255
 .1.3.6.1.4.1.52.4.1.2.7.2.6.4.1.7
ctPppLcpExtMpChannelsToRemove mandatory
Used to set the number of channel(s) to decrement by
whenever the need for possible previously added bandwidth
is determined to no longer be needed.
Integer32r/w
Constraints:
range: 1-255
 .1.3.6.1.4.1.52.4.1.2.7.2.6.4.1.8

ctPppEcpExtTable

table mandatory
.1.3.6.1.4.1.52.4.1.2.7.2.6.5 · 1 row entry · 3 columns
Open in standard view 
Table containing the parameters for the local
PPP entity related to the encrpytion control protocol.
ctPppEcpExtEntry entry .1.3.6.1.4.1.52.4.1.2.7.2.6.5.1
PPP ECP configuration information for a particular
PPP link.
Indexes
ctPppEcpExtIfIndex
Column Syntax OID
ctPppEcpExtIfIndex mandatory
The ifIndex of the interface. This is the index of this
entry in the ifTable.
Integer32r/w
Constraints:
range: 1-1024
 .1.3.6.1.4.1.52.4.1.2.7.2.6.5.1.1
ctPppEcpKey mandatory
A 56-bit key (14 hex characters) used for the DES encryption.
OctetStringr/w
Constraints:
range: 14-14
 .1.3.6.1.4.1.52.4.1.2.7.2.6.5.1.2
ctPppEcpIV mandatory
A 64-bit initialization vector (16 hex characters) used for
the DES encryption in CBC mode.
OctetStringr/w
Constraints:
range: 16-16
 .1.3.6.1.4.1.52.4.1.2.7.2.6.5.1.3

ctWanalyzerTable

table mandatory
.1.3.6.1.4.1.52.4.1.2.7.2.7.1 · 1 row entry · 7 columns
Open in standard view 
Table containing the parameters for the local
Wanalyzer entity related to the configured Protocol.
ctWanalyzerEntry entry .1.3.6.1.4.1.52.4.1.2.7.2.7.1.1
Information for a particular
interface.
Indexes
ctWanalyzerIfIndex
Column Syntax OID
ctWanalyzerIfIndex mandatory
The ifIndex of the interface. This is the index of this
entry in the ifTable.
Integer32r/w
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.52.4.1.2.7.2.7.1.1.1
ctWanalyzerEnabled mandatory
This Persistent Object is a flag which indicates whether
or not the WANalyzer is enabled or disabled. Upon system
initialization this flag defaults to disabled unless
a value for this object is found in NVRAM.
Enumerationr/w
Enumerated Values:
1disabled
2enabled
 .1.3.6.1.4.1.52.4.1.2.7.2.7.1.1.2
ctWanalyzerMaxEntries mandatory
This Persistent Object is an integer greater than 1
which specifies the maximum total number of entries
which the table will handle. When the WANalyzer is
enabled this value defaults to a value dependent on
the implem…
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.1.2.7.2.7.1.1.3
ctWanalyzerClearAll mandatory
When set to 2, the entire table of entries is cleared.
Upon clearing of the table, this value is reset to 1.
This object is not present if the WANalyzer is disabled.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.1.2.7.2.7.1.1.4
ctWanalyzerClearInterface mandatory
When set to 2, all entries for this MIB-II interface
index will be removed from the table. Upon complete
removal of those entries, this value is reset to 1.
This object is not present if the WANalyzer is disabled.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.1.2.7.2.7.1.1.5
ctWanalyzerDisplayInterface mandatory
When set to a valid MIB-II interface number, the table
displays only those entries in the table which were
received from that MIB-II interface. This value is set
to -1 upon initialization and indicates that entries
from…
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.1.2.7.2.7.1.1.6
ctWanalyzerCurrEntries mandatory
A non-negative integer indicating the current number
of entries in the table. This object is not present
if the WANalyzer is disabled.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.1.2.7.2.7.1.1.7

wanalyzerMessageTable

table mandatory
.1.3.6.1.4.1.52.4.1.2.7.2.7.2 · 1 row entry · 5 columns
Open in standard view 
A table containing all of the message entries for this 
device. If the WANalyzer is disabled, this table will
not be present.
wanalyzerEntry entry .1.3.6.1.4.1.52.4.1.2.7.2.7.2.1
A message entry in the WANalyzer table corresponding
to a particular interface in a particular instance.
Indexes
wanMessageIndex
Column Syntax OID
wanMessageIndex mandatory
An integer between 1 and wanalyzerMaxEntries which
indicates the overall position this entry has in the
WANalyzer table.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.1.2.7.2.7.2.1.1
wanMessageInterfaceIndex mandatory
The MIB-II interface index representing the interface
which sent this message.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.1.2.7.2.7.2.1.2
wanMessageDate mandatory
The date when this message was received by the WANalyzer
in the standard MMDDYY format.
OctetString
Constraints:
range: 8-8
 .1.3.6.1.4.1.52.4.1.2.7.2.7.2.1.3
wanMessageTime mandatory
The time of day when this message was received by the
WANalyzer in the standard HHMMSS format.
OctetString
Constraints:
range: 6-6
 .1.3.6.1.4.1.52.4.1.2.7.2.7.2.1.4
wanMessageCode mandatory
An enumerated value representing the nature of the debug
message sent by the interface.
Enumeration
Enumerated Values:
1wanalyzerLastMessageRepeated
2pppAuthentication
3pppBncpThisLayerStart
4pppBncpThisLayerFinished
5pppBncpThisLayerUp
6pppBncpThisLayerDown
7pppBncpInitializeRestartCount
8pppBncpZeroRestartCount
9pppBncpRcvConfReqGood
10pppBncpRcvConfReqBad
11pppBncpReceiveConfigureAck
12pppBncpReceiveConfigureNak
13pppBncpReceiveConfigureReject
14pppBncpReceiveTerminateRequest
15pppBncpReceiveTerminateAck
16pppBncpReceiveCodeRejectPermitted
17pppBncpReceiveCodeRejectCatastrophic
18pppBncpReceiveProtocolRejectPermitted
19pppBncpReceiveEchoRequest
20pppBncpReceiveEchoReply
21pppBncpReceiveDiscardRequest
22pppBncpReceiveUnknownCode
23pppBncpIllegalAction
24pppBncpSendConfigureRequest
25pppBncpSendConfigureAck
26pppBncpSendConfigureNak
27pppBncpSendConfigureReject
28pppBncpSendTerminateRequest
29pppBncpSendTerminateAck
30pppBncpSendCodeReject
31pppBncpSendProtocolReject
32pppBncpSendEchoReply
33pppBncpInitialState
34pppBncpStartingState
35pppBncpClosedState
36pppBncpStoppedState
37pppBncpClosingState
38pppBncpStoppingState
39pppBncpReqSentState
40pppBncpAckRcvdState
41pppBncpAckSentState
42pppBncpOpenedState
43pppBncpEthernetMacType
44pppBncpTokenRingMacType
45pppBncpFddiMacType
46pppBncpBridgeIdRcvReq
47pppBncpBridgeIdRcvNak
48pppBncpBridgeIdRcvRej
49pppBncpBridgeIdXmitReq
50pppBncpMacSelectRcvReq
51pppBncpMacSelectRcvNak
52pppBncpMacSelectRcvRej
53pppBncpMacSelectXmitReq
54pppBncpTinygramRcvReq
55pppBncpTinygramRcvNak
56pppBncpTinygramRcvRej
57pppBncpTinygramXmitReq
58pppBncpLanIdRcvReq
59pppBncpLanIdRcvNak
60pppBncpLanIdRcvRej
61pppBncpLanIdXmitReq
62pppCcpThisLayerStart
63pppCcpThisLayerFinished
64pppCcpThisLayerUp
65pppCcpThisLayerDown
66pppCcpInitializeRestartCount
67pppCcpZeroRestartCount
68pppCcpRcvConfReqGood
69pppCcpRcvConfReqBad
70pppCcpReceiveConfigureAck
71pppCcpReceiveConfigureNak
72pppCcpReceiveConfigureReject
73pppCcpReceiveTerminateRequest
74pppCcpReceiveTerminateAck
75pppCcpReceiveCodeRejectPermitted
76pppCcpReceiveCodeRejectCatastrophic
77pppCcpReceiveProtocolRejectPermitted
78pppCcpReceiveEchoRequest
79pppCcpReceiveEchoReply
80pppCcpReceiveDiscardRequest
81pppCcpReceiveUnknownCode
82pppCcpIllegalAction
83pppCcpSendConfigureRequest
84pppCcpSendConfigureAck
85pppCcpSendConfigureNak
86pppCcpSendConfigureReject
87pppCcpSendTerminateRequest
88pppCcpSendTerminateAck
89pppCcpSendCodeReject
90pppCcpSendProtocolReject
91pppCcpSendEchoReply
92pppCcpInitialState
93pppCcpStartingState
94pppCcpClosedState
95pppCcpStoppedState
96pppCcpClosingState
97pppCcpStoppingState
98pppCcpReqSentState
99pppCcpAckRcvdState
100pppCcpAckSentState
101pppCcpOpenedState
102pppCcpProprietaryCompRcvReq
103pppCcpProprietaryCompRcvNak
104pppCcpProprietaryCompRcvRej
105pppCcpProprietaryCompXmitReq
106pppCcpPredictorType1RcvReq
107pppCcpPredictorType1RcvNak
108pppCcpPredictorType1RcvRej
109pppCcpPredictorType1XmitReq
110pppCcpPredictorType2RcvReq
111pppCcpPredictorType2RcvNak
112pppCcpPredictorType2RcvRej
113pppCcpPredictorType2XmitReq
114pppCcpPuddleJumperRcvReq
115pppCcpPuddleJumperRcvNak
116pppCcpPuddleJumperRcvRej
117pppCcpPuddleJumperXmitReq
118pppCcpHpPpcRcvReq
119pppCcpHpPpcRcvNak
120pppCcpHpPpcRcvRej
121pppCcpHpPpcXmitReq
122pppCcpStacLzsRcvReq
123pppCcpStacLzsRcvNak
124pppCcpStacLzsRcvRej
125pppCcpStacLzsXmitReq
126pppCcpMsPpcRcvReq
127pppCcpMsPpcRcvNak
128pppCcpMsPpcRcvRej
129pppCcpMsPpcXmitReq
130pppCcpGandalfFzaRcvReq
131pppCcpGandalfFzaRcvNak
132pppCcpGandalfFzaRcvRej
133pppCcpGandalfFzaXmitReq
134pppCcpV42bisRcvReq
135pppCcpV42bisRcvNak
136pppCcpV42bisRcvRej
137pppCcpV42bisXmitReq
138pppCcpBsdLzwRcvReq
139pppCcpBsdLzwRcvNak
140pppCcpBsdLzwRcvRej
141pppCcpBsdLzwXmitReq
142pppCcpStackDcpRcvReq
143pppCcpStackDcpRcvNak
144pppCcpStackDcpRcvRej
145pppCcpStackDcpXmitReq
146pppChapChallengeReceived
147pppChapResponseReceived
148pppChapSuccessReceived
149pppChapFailureReceived
150pppChapSuccessSent
151pppChapFailureSent
152pppChapChallengeSent
153pppChapResponseSent
154pppIpcpThisLayerStart
155pppIpcpThisLayerFinished
156pppIpcpThisLayerUp
157pppIpcpThisLayerDown
158pppIpcpInitializeRestartCount
159pppIpcpZeroRestartCount
160pppIpcpRcvConfReqGood
161pppIpcpRcvConfReqBad
162pppIpcpReceiveConfigureAck
163pppIpcpReceiveConfigureNak
164pppIpcpReceiveConfigureReject
165pppIpcpReceiveTerminateRequest
166pppIpcpReceiveTerminateAck
167pppIpcpReceiveCodeRejectPermitted
168pppIpcpReceiveCodeRejectCatastrophic
169pppIpcpReceiveProtocolRejectPermitted
170pppIpcpReceiveEchoRequest
171pppIpcpReceiveEchoReply
172pppIpcpReceiveDiscardRequest
173pppIpcpReceiveUnknownCode
174pppIpcpIllegalAction
175pppIpcpSendConfigureRequest
176pppIpcpSendConfigureAck
177pppIpcpSendConfigureNak
178pppIpcpSendConfigureReject
179pppIpcpSendTerminateRequest
180pppIpcpSendTerminateAck
181pppIpcpSendCodeReject
182pppIpcpSendProtocolReject
183pppIpcpSendEchoReply
184pppIpcpInitialState
185pppIpcpStartingState
186pppIpcpClosedState
187pppIpcpStoppedState
188pppIpcpClosingState
189pppIpcpStoppingState
190pppIpcpReqSentState
191pppIpcpAckRcvdState
192pppIpcpAckSentState
193pppIpcpOpenedState
194pppIpcpIpAddressRcvReq
195pppIpcpIpAddressRcvNak
196pppIpcpIpAddressRcvRej
197pppIpcpIpAddressXmitReq
198pppIpcpCompressionTypeRcvReq
199pppIpcpCompressionTypeRcvRej
200pppIpcpCompressionTypeRcvNak
201pppIpcpCompressionTypeXmitReq
202pppIpxcpThisLayerStart
203pppIpxcpThisLayerFinished
204pppIpxcpThisLayerUp
205pppIpxcpThisLayerDown
206pppIpxcpInitializeRestartCount
207pppIpxcpZeroRestartCount
208pppIpxcpRcvConfReqGood
209pppIpxcpRcvConfReqBad
210pppIpxcpReceiveConfigureAck
211pppIpxcpReceiveConfigureNak
212pppIpxcpReceiveConfigureReject
214pppIpxcpReceiveTerminateAck
215pppIpxcpReceiveCodeRejectPermitted
216pppIpxcpReceiveCodeRejectCatastrophic
217pppIpxcpReceiveProtocolRejectPermitted
218pppIpxcpReceiveEchoRequest
219pppIpxcpReceiveEchoReply
220pppIpxcpReceiveDiscardRequest
221pppIpxcpReceiveUnknownCode
222pppIpxcpIllegalAction
223pppIpxcpSendConfigureRequest
224pppIpxcpSendConfigureAck
225pppIpxcpSendConfigureNak
226pppIpxcpSendConfigureReject
227pppIpxcpSendTerminateRequest
228pppIpxcpSendTerminateAck
229pppIpxcpSendCodeReject
230pppIpxcpSendProtocolReject
231pppIpxcpSendEchoReply
232pppIpxcpInitialState
233pppIpxcpStartingState
234pppIpxcpClosedState
235pppIpxcpStoppedState
236pppIpxcpClosingState
237pppIpxcpStoppingState
238pppIpxcpReqSentState
239pppIpxcpAckRcvdState
240pppIpxcpAckSentState
241pppIpxcpOpenedState
242pppIpxcpCompressionProtocolRcvReq
243pppIpxcpCompressionProtocolRcvNak
244pppIpxcpCompressionProtocolRcvRej
245pppIpxcpCompressionProtocolXmitReq
246pppIpxcpNetworkNumberRcvReq
247pppIpxcpNetworkNumberRcvNak
248pppIpxcpNetworkNumberRcvRej
249pppIpxcpNetworkNumberXmitReq
250pppIpxcpNodeNumberRcvReq
251pppIpxcpNodeNumberRcvNak
252pppIpxcpNodeNumberRcvRej
253pppIpxcpNodeNumberXmitReq
254pppIpxcpRoutingProtocolRcvReq
255pppIpxcpRoutingProtocolRcvNak
256pppIpxcpRoutingProtocolRcvRej
257pppIpxcpRoutingProtocolXmitReq
258pppIpxcpRouterNameRcvReq
259pppIpxcpRouterNameRcvNak
260pppIpxcpRouterNameRcvRej
261pppIpxcpRouterNameXmitReq
262pppIpxcpConfigurationCompleteRcvReq
263pppIpxcpConfigurationCompleteRcvNak
264pppIpxcpConfigurationCompleteRcvRej
265pppIpxcpConfigurationCompleteXmitReq
266pppLcpThisLayerStart
267pppLcpThisLayerFinished
268pppLcpThisLayerUp
269pppLcpThisLayerDown
270pppLcpInitializeRestartCount
271pppLcpZeroRestartCount
272pppLcpRcvConfReqGood
273pppLcpRcvConfReqBad
274pppLcpReceiveConfigureAck
275pppLcpReceiveConfigureNak
276pppLcpReceiveConfigureReject
277pppLcpReceiveTerminateRequest
278pppLcpReceiveTerminateAck
279pppLcpReceiveCodeRejectPermitted
280pppLcpReceiveCodeRejectCatastrophic
281pppLcpReceiveProtocolReject
282pppLcpReceiveEchoRequest
283pppLcpReceiveEchoReply
284pppLcpReceiveDiscardRequest
285pppLcpReceiveUnknownCode
286pppLcpIllegalAction
287pppLcpSendConfigureRequest
288pppLcpSendConfigureAck
289pppLcpSendConfigureNak
290pppLcpSendConfigureReject
291pppLcpSendTerminateRequest
292pppLcpSendTerminateAck
293pppLcpSendCodeReject
294pppLcpSendProtocolReject
295pppLcpSendEchoReply
296pppLcpInitialState
297pppLcpStartingState
298pppLcpClosedState
299pppLcpStoppedState
300pppLcpClosingState
301pppLcpStoppingState
302pppLcpReqSentState
303pppLcpAckRcvdState
304pppLcpAckSentState
305pppLcpOpenedState
306pppLcpMruRcvReq
307pppLcpMruRcvNak
308pppLcpMruRcvRej
309pppLcpMruXmitReq
310pppLcpAsyncCharMapRcvReq
311pppLcpAsyncCharMapRcvNak
312pppLcpAsyncCharMapRcvRej
313pppLcpAsyncCharMapXmitReq
314pppLcpAuthenticationRcvReq
315pppLcpAuthenticationRcvNak
316pppLcpAuthenticationRcvRej
317pppLcpAuthenticationXmitReq
318pppLcpMagicNumberRcvReq
319pppLcpMagicNumberRcvNak
320pppLcpMagicNumberRcvRej
321pppLcpMagicNumberXmitReq
322pppLcpLinkQualityRcvReq
323pppLcpLinkQualityRcvNak
324pppLcpLinkQualityRcvRej
325pppLcpLinkQualityXmitReq
326pppLcpProtCompRcvReq
327pppLcpProtCompRcvNak
328pppLcpProtCompRcvRej
329pppLcpProtCompXmitReq
330pppLcpAddrCompRcvReq
331pppLcpAddrCompRcvNak
332pppLcpAddrCompRcvRej
333pppLcpAddrCompXmitReq
334pppLcpFcs32BitRcvReq
335pppLcpFcs32BitRcvNak
336pppLcpFcs32BitRcvRej
337pppLcpFcs32BitXmitReq
338pppLcpSelfDescPaddingRcvReq
339pppLcpSelfDescPaddingRcvNak
340pppLcpSelfDescPaddingRcvRej
341pppLcpSelfDescPaddingXmitReq
342pppLcpCompoundFramesRcvReq
343pppLcpCompoundFramesRcvNak
344pppLcpCompoundFramesRcvRej
345pppLcpCompoundFramesXmitReq
346pppLcpCallbackRcvReq
347pppLcpCallbackRcvNak
348pppLcpCallbackRcvRej
349pppLcpCallbackXmitReq
350pppLexThisLayerStart
351pppLexThisLayerFinished
352pppLexThisLayerUp
353pppLexThisLayerDown
354pppLexInitializeRestartCount
355pppLexZeroRestartCount
356pppLexRcvConfReqGood
357pppLexRcvConfReqBad
358pppLexReceiveConfigureAck
359pppLexReceiveConfigureNak
360pppLexReceiveConfigureReject
361pppLexReceiveTerminateRequest
362pppLexReceiveTerminateAck
363pppLexReceiveCodeRejectPermitted
364pppLexReceiveCodeRejectCatastrophic
365pppLexReceiveProtocolRejectPermitted
366pppLexReceiveEchoRequest
367pppLexReceiveEchoReply
368pppLexReceiveDiscardRequest
369pppLexReceiveUnknownCode
370pppLexIllegalAction
371pppLexSendConfigureRequest
372pppLexSendConfigureAck
373pppLexSendConfigureNak
374pppLexSendConfigureReject
375pppLexSendTerminateRequest
376pppLexSendTerminateAck
377pppLexSendCodeReject
378pppLexSendProtocolReject
379pppLexSendEchoReply
380pppLexInitialState
381pppLexStartingState
382pppLexClosedState
383pppLexStoppedState
384pppLexClosingState
385pppLexStoppingState
386pppLexReqSentState
387pppLexAckRcvdState
388pppLexAckSentState
389pppLexOpenedState
390pppLexMacTypeSelectRcvReq
391pppLexMacTypeSelectRcvNak
392pppLexMacTypeSelectRcvRej
393pppLexMacTypeSelectXmitReq
394pppLexTinygramCompressRcvReq
395pppLexTinygramCompressRcvNak
396pppLexTinygramCompressRcvRej
397pppLexTinygramCompressXmitReq
398pppLexMacAddressRcvReq
399pppLexMacAddressRcvNak
400pppLexMacAddressRcvRej
401pppLexMacAddressXmitReq
402pppLexMacRelayRcvReq
403pppLexMacRelayRcvNak
404pppLexMacRelayRcvRej
405pppLexMacRelayXmitReq
406pppLexStatisticsRequestRcvReq
407pppLqrSent
408pppLqrReceived
409pppLinkDead
410pppLinkEstablishment
411pppLinkTermination
412pppNetworkLayerPhase
413pppPapAuthenticateReqReceived
414pppPapAuthenticateAckReceived
415pppPapAuthenticateNakReceived
416pppPapAuthenticateReqSent
417pppPapAuthenticateAckSent
418pppPapAuthenticateNakSent
500frGotLmiPacket
501frGotBadQ922Header
502frGotCllmPacket
503frInactiveReceivedPacket
504frReceivedNlpidIpPacket
505frSentXidPacket
506frSentXidResponse
507frReceivedXidPacket
508frXidTimerExpired
509frGotBadUi
510frGotBadSnapPacket
511frLinkUp
512frLinkDown
513frLmiStarted
514frLmiStopped
515frLmiSentFullStatusEnquiry
516frLmiSentKeepAliveMessage
517frLmiStatusResponseReceived
518frLmiGotAnsiReportType
519frLmiGotFullStatusReport
520frLmiGotKeepAliveMessage
521frLmiUnsolicitedKeepAlive
522frLmiAsynchronousStatus
523frLmiGotQ933AReportType
524frLmiBadPvcStatusLength
525frLmiT391TimeoutFs
526frLmiT391TimeoutSe
527frLmiT391PollFailed
528frLmiT391PollSucceeded
529frLmiStatusEnquiryReceived
530frDcpMode1Initializing
531frDcpMode1Disabled
532frDcpMode1ControlPacketReceived
533frDcpMode1DataPacketReceived
534frDcpMode1RequestSent
535frDcpMode1RequestReceived
536frDcpMode1ResponseSent
537frDcpMode1ResponseReceived
538frDcpMode1Operational
539frDcpMode1TimerExpired
540frDcpMode2ControlPacketReceived
541frDcpResetPacketSent
542frDcpResetTimerExpired
543frDcpResetAckSent
544frDcpDictionaryQuotaExceeded
1000isdnRemoteConnectionUp
1001isdnRemoteConnectionDown
1002isdnActivateConnection
1003isdnDeactivateConnection
1500multilinkMpLinkUp
1501multilinkMpAddBW
1502multilinkMpRemoveBW
1503multilinkMpSentBeginningFragment
1504multilinkMpSentMiddleFragment
1505multilinkMpSentEndFragment
1506multilinkMpSentCompleteMessage
1507multilinkMpReceivedBeginningFragment
1508multilinkMpReceivedMiddleFragment
1509multilinkMpReceivedEndFragment
1510multilinkMpReceivedCompleteMessage
 .1.3.6.1.4.1.52.4.1.2.7.2.7.2.1.5

ds1AlarmConfigTable

table mandatory
.1.3.6.1.4.1.52.4.1.2.7.2.8.2 · 1 row entry · 9 columns
Open in standard view 
Table containing objects used to configure DS1 alarm 
functionality on a per DS1 basis.
ds1AlarmConfigEntry entry .1.3.6.1.4.1.52.4.1.2.7.2.8.2.1
A description of a single entry.
Indexes
ds1PhysNum
Column Syntax OID
ds1PhysNum mandatory
The value for this object is equal to the value
of a unique physical connection identifier associated
with this DS1 which is clearly labeled on the device.
For those products that do not have a DS1 identifier
labeled on…
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.1.2.7.2.8.2.1.1
ds1AlarmAdmin mandatory
Used to enable and disable the DS1 Alarm
Monitoring Application for this DS1 circuit.
Enumerationr/w
Enumerated Values:
1disabled
2enabled
 .1.3.6.1.4.1.52.4.1.2.7.2.8.2.1.2
ds1AlarmAutoRecovery mandatory
Used to enable and disable the DS1 Alarm
Automatic Recovery feature for this DS1 circuit.
For those devices that support ds1
alarm monitoring, but do not support the automatic
recovery feature, this object always return…
Enumerationr/w
Enumerated Values:
1disabled
2enabled
 .1.3.6.1.4.1.52.4.1.2.7.2.8.2.1.3
ds1AlarmTrapEnable mandatory
Used to enable and disable the DS1 Alarm
SNMP Trap generation feature for this DS1 circuit.
This object operates in conjunction with configuration
of objects in the ctron-trap-mib.txt
Enumerationr/w
Enumerated Values:
1disabled
2enabled
 .1.3.6.1.4.1.52.4.1.2.7.2.8.2.1.4
ds1AlarmESCount mandatory
Used in conjuction with ctDs1AlarmESInterval to set
the threshold for alarm generation when the number of
Errored Seconds for a specified time interval, measured
in minutes, is exceeded. The default Errored Seconds …
Integer32r/w
Constraints:
range: 1-300
 .1.3.6.1.4.1.52.4.1.2.7.2.8.2.1.5
ds1AlarmESInterval mandatory
Used in conjuction with ctDs1AlarmESCount to set the
threshold for alarm generation when the number of
Errored Seconds for a specified time interval, measured
in minutes, is exceeded. The default Errored Seconds
al…
Integer32r/w
Constraints:
range: 1-15
 .1.3.6.1.4.1.52.4.1.2.7.2.8.2.1.6
ds1AlarmBPVErrorRate mandatory
Used to specify the negative exponent of 10, used in
monitoring Bipolar Violations (Code Violations for E1)
over intervals defined by ds1AlarmBPVInterval. For
example, for a ds1AlarmBPVErrorRate value of 6 used
with …
Integer32r/w
Constraints:
range: 5-9
 .1.3.6.1.4.1.52.4.1.2.7.2.8.2.1.7
ds1AlarmBPVInterval mandatory
Used to specify the interval, used in
monitoring Bipolar Violations (Code Violations for E1)
with thresholds defined by ds1AlarmBPVErrorRate. For
example, for a ds1AlarmBPVErrorRate value of 6 used
with a ds1AlarmBPV…
Integer32r/w
Constraints:
range: 1-15
 .1.3.6.1.4.1.52.4.1.2.7.2.8.2.1.8
ds1AlarmManualRecovery mandatory
To cause a manual recovery to occur, this object is set
to a 1. It is always read as a 1. The recovery will
occur only when automatic recovery is disabled.
Enumerationr/w
Enumerated Values:
1recover
 .1.3.6.1.4.1.52.4.1.2.7.2.8.2.1.9

ipPQAddressTable

table mandatory
.1.3.6.1.4.1.52.4.1.2.7.2.9.2 · 1 row entry · 2 columns
Open in standard view 
Table containing IP addresses, used in an
IP Priority Queue Forwarding function.
ipPQAddressEntry entry .1.3.6.1.4.1.52.4.1.2.7.2.9.2.1
A description of a single entry.
Indexes
ipPQAddressId
Column Syntax OID
ipPQAddressId mandatory
A unique value identifying an element in a sequence
of IP PQ address entries.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.52.4.1.2.7.2.9.2.1.1
ipPQIPAddress mandatory
Returns an IP address associated with a specific
entry in this table.
RFC1155-SMIIpAddress
Textual Convention: RFC1155-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.52.4.1.2.7.2.9.2.1.2

ctDs3ExtensionsTable

table mandatory
.1.3.6.1.4.1.52.4.1.2.7.2.10.1 · 1 row entry · 3 columns
Open in standard view 
This table is an extension to the standard ds3 configuration
table. It is a list of items that are pertinant to ds3 ports
on a platform. There is one entry per ds3 physical port on
the platform.
ctDs3ExtensionsEntry entry .1.3.6.1.4.1.52.4.1.2.7.2.10.1.1
A ds3 extensions entry containing objects relating to
the particular ds3 physical port.
Indexes
ctDs3ExtensionsEntryIndex
Column Syntax OID
ctDs3ExtensionsEntryIndex mandatory
A unique value for each ds3 physical port on the platform.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.1.2.7.2.10.1.1.1
ctDs3ExtensionsNumInterfaces mandatory
The number of interfaces on this physical port. This
number inidicates the number of entries this physical port
uses in the ifTable.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.1.2.7.2.10.1.1.2
ctDs3ExtensionsLineBuildOut mandatory
The line build out setting for this ds3 physical port.
Unknown indicates that the setting is neither readable or
writable.
Enumerationr/w
Enumerated Values:
1unknown
2zeroto255feet
3a255to450feet
 .1.3.6.1.4.1.52.4.1.2.7.2.10.1.1.3