CTRON-IPX-ROUTER-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
20
Rows
20
Columns
203

nwIpxFwdIfTable

table mandatory
.1.3.6.1.4.1.52.4.2.2.2.3.2.2.2.2.1.1 · 1 row entry · 14 columns
Open in standard view 
This table contains an entry for each router port. This table is
indexed by nwIpxFwdIfIndex, which indicates the value of MIB2 
ifIndex, which identifies the router port for which the entry exists.
nwIpxFwdIfEntry entry .1.3.6.1.4.1.52.4.2.2.2.3.2.2.2.2.1.1.1
Each entry specifies the IPX Routing Services configuration for the
router port for which the entry exists.
Indexes
nwIpxFwdIfIndex
Column Syntax OID
nwIpxFwdIfIndex mandatory
Indicates the value of MIB 2 ifindex, which identifies the router
port for which the entry exists.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.2.2.2.3.2.2.2.2.1.1.1.1
nwIpxFwdIfAdminStatus mandatory
Sets the administrative state of IPX Routing Services on the router
port for which the entry exists. Enabled (3) causes IPX Routing
Services to become active. Disabled (2) causes it to become inactive.
Enumerationr/w
Enumerated Values:
1other
2disabled
3enabled
 .1.3.6.1.4.1.52.4.2.2.2.3.2.2.2.2.1.1.1.2
nwIpxFwdIfOperStatus mandatory
Indicates the current operating condition of IPX Routing Services on
the router port for which the entry exists. The value of
nwIpxFwdIfOperStatus indicates any problem with the configuration of
IPX Routing Services on…
Enumeration
Enumerated Values:
1other
2disabled
3enabled
4pending-disable
5pending-enable
6invalid-config
 .1.3.6.1.4.1.52.4.2.2.2.3.2.2.2.2.1.1.1.3
nwIpxFwdIfOperationalTime mandatory
Indicates the elapsed time, in hundredths of a second, that
nwIpxFwdIfOperStatus has been in its current state.
RFC1155-SMITimeTicks
Textual Convention: RFC1155-SMITimeTicks Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52.4.2.2.2.3.2.2.2.2.1.1.1.4
nwIpxFwdIfControl mandatory
This object does not apply to this protocol. It is a common object
inherited from the MIB framework used to provide a common management
interface to all the Cabletron Routing Services protocol-specific MIBs.
Setting thi…
Enumerationr/w
Enumerated Values:
1other
2add
3delete
 .1.3.6.1.4.1.52.4.2.2.2.3.2.2.2.2.1.1.1.5
nwIpxFwdIfMtu mandatory
Specifies the Maximum Transmission Unit (MTU) for IPX packets on the
router port for which the entry exists. This includes the IPX header
and data but does not include framing.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.2.2.2.3.2.2.2.2.1.1.1.6
nwIpxFwdIfForwarding mandatory
Controls forwarding of IPX packets on the router port for which the
entry exists. Enabled (3) causes IPX packets to be forwarded. Disabled
(2) prevents IPX packets from being forwarded.
Enumerationr/w
Enumerated Values:
1other
2disabled
3enabled
 .1.3.6.1.4.1.52.4.2.2.2.3.2.2.2.2.1.1.1.7
nwIpxFwdIfFrameType mandatory
Specifies the framing type for IPX packets forwarded on the router
port for which the entry exists. Some frame types are valid for
specific media types. The comments reflect those valid media types.
Enumerationr/w
Enumerated Values:
1other
2ethernet
3snap
4i8022
6novell
8nativewan
9encapenet
10encapenet8022
11encapenetsnap
12encapenetnovell
13encaptr8022
14encaptrsnap
15encapfddi8022
16encapfddisnap
17canonical
 .1.3.6.1.4.1.52.4.2.2.2.3.2.2.2.2.1.1.1.8
nwIpxFwdIfAclIdentifier mandatory
Specifies the Access Control ID of the Access Control List in effect
for IPX packets being routed on the router port for which the entry
exists. A value of 0 indicates that no Access Control List is in
effect.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.2.2.2.3.2.2.2.2.1.1.1.9
nwIpxFwdIfAclStatus mandatory
Controls the operation of any Access Control List configured for IPX
traffic on the router port for which the entry exists. Enabled (3)
applies the Access Control List indicated by the value of
nwIpxFwdIfAclIdentifier t…
Enumerationr/w
Enumerated Values:
1other
2disabled
3enabled
 .1.3.6.1.4.1.52.4.2.2.2.3.2.2.2.2.1.1.1.10
nwIpxFwdIfCacheControl mandatory
Controls IPX Address caching on the router port for which the entry
exists. When IPX Address caching is enabled, IPX Addresses used for
address validation, filtering, and forwarding are stored in the cache.
This cache i…
Enumerationr/w
Enumerated Values:
1other
2disable
3enable
 .1.3.6.1.4.1.52.4.2.2.2.3.2.2.2.2.1.1.1.11
nwIpxFwdIfCacheEntries mandatory
Indicates the number of entries in the IPX Address cache on the router port for which the entry exists.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52.4.2.2.2.3.2.2.2.2.1.1.1.12
nwIpxFwdIfCacheHits mandatory
Indicates the number of times entries in the IPX Adddress cache have
been used to provide the IPX Address required to validate, filter, or
forward an IPX packet on the router port.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52.4.2.2.2.3.2.2.2.2.1.1.1.13
nwIpxFwdIfCacheMisses mandatory
Indicates the number of times the IPX Address required to validate,
filter, or forward an IPX packet on the router port was not found in
the IPX Address cache.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52.4.2.2.2.3.2.2.2.2.1.1.1.14

nwIpxAddressTable

table mandatory
.1.3.6.1.4.1.52.4.2.2.2.3.2.2.2.2.1.2 · 1 row entry · 4 columns
Open in standard view 
This table contains an entry for each Novell network address assigned
to each router port.
nwIpxAddrEntry entry .1.3.6.1.4.1.52.4.2.2.2.3.2.2.2.2.1.2.1
Each entry specifies the Novell network addressing information for
the logical Novll network for which the entry exists.
Indexes
nwIpxAddrIfIndex nwIpxAddrIfAddress
Column Syntax OID
nwIpxAddrIfIndex mandatory
Indicates the value of MIB 2 ifindex, which identifies the router
port for which the entry exists.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.2.2.2.3.2.2.2.2.1.2.1.1
nwIpxAddrIfAddress mandatory
This is the Novell network number assigned to the logical Novell
network for which the entry exists. The IpxAddress consists of a
network number of 4 octets.
IpxAddress
Textual Convention: IpxAddress OctetString
 .1.3.6.1.4.1.52.4.2.2.2.3.2.2.2.2.1.2.1.2
nwIpxAddrIfControl mandatory
Set this object to add or delete this entry from the table.
Enumerationr/w
Enumerated Values:
1other
2add
3delete
 .1.3.6.1.4.1.52.4.2.2.2.3.2.2.2.2.1.2.1.3
nwIpxAddrIfAddrType mandatory
Specifies whether the Novell network number, nwIpxAddrIfAddress, is
the primary or secondary address for the router port.
Enumerationr/w
Enumerated Values:
1other
2primary
3secondary
 .1.3.6.1.4.1.52.4.2.2.2.3.2.2.2.2.1.2.1.4

nwIpxFwdIfCtrTable

table mandatory
.1.3.6.1.4.1.52.4.2.2.2.3.2.2.2.2.2.1 · 1 row entry · 23 columns
Open in standard view 
This table contains an entry for each router port configured and
enabled for IPX Routing Services.
nwIpxFwdIfCtrEntry entry .1.3.6.1.4.1.52.4.2.2.2.3.2.2.2.2.2.1.1
Each entry indicates the current packet and byte count of IPX packets
on the port for which the entry exists.
Indexes
nwIpxFwdIfCtrIfIndex
Column Syntax OID
nwIpxFwdIfCtrIfIndex mandatory
Indicates the value of MIB 2 ifindex, which identifies the router
port for which the entry exists.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.2.2.2.3.2.2.2.2.2.1.1.1
nwIpxFwdIfCtrAdminStatus mandatory
Sets the administrative state of the per-port IPX packet and byte
counters on the router port for which the entry exists. Enabled (3)
causes these counters to become active. Disabled (2) causes these
counters to become …
Enumerationr/w
Enumerated Values:
1other
2disabled
3enabled
 .1.3.6.1.4.1.52.4.2.2.2.3.2.2.2.2.2.1.1.2
nwIpxFwdIfCtrReset mandatory
Resets the per-port IPX packet and byte counters on the router port
for which this entry exists. Reset (2) resets the counters to 0.
nwIpxFwdIfCtrOperationalTime is also reset to 0.
Enumerationr/w
Enumerated Values:
1other
2reset
 .1.3.6.1.4.1.52.4.2.2.2.3.2.2.2.2.2.1.1.3
nwIpxFwdIfCtrOperationalTime mandatory
Indicates the elapsed time, in hundredths of a second, that
nwIpxFwdIfCtrAdminStatus has been in the current state.
RFC1155-SMITimeTicks
Textual Convention: RFC1155-SMITimeTicks Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52.4.2.2.2.3.2.2.2.2.2.1.1.4
nwIpxFwdIfCtrInPkts mandatory
Indicates the total number of IPX packets that have been received,
during nwIpxFwdIfCtrOperationaltime, on the router port for which the
entry exists.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52.4.2.2.2.3.2.2.2.2.2.1.1.5
nwIpxFwdIfCtrOutPkts mandatory
Indicates the total number of IPX packets that have been transmitted,
during nwIpxFwdIfCtrOperationalTime, on the router port for which the
entry exists.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52.4.2.2.2.3.2.2.2.2.2.1.1.6
nwIpxFwdIfCtrFwdPkts mandatory
Indicates the total number of IPX packets that have been forwarded,
during nwIpxFwdIfCtrOperationalTime, on the router port for which the
entry exists.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52.4.2.2.2.3.2.2.2.2.2.1.1.7
nwIpxFwdIfCtrFilteredPkts mandatory
Indicates the total number of IPX packets that have been
administratively filtered, during nwIpxFwdIfCtrOperationalTime, on
the router port for which the entry exists.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52.4.2.2.2.3.2.2.2.2.2.1.1.8
nwIpxFwdIfCtrDiscardPkts mandatory
Indicates the total number of IPX packets that have been discarded
(dropped), during nwIpxFwdIfCtrOperationalTime, on the router port for
which the entry exists.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52.4.2.2.2.3.2.2.2.2.2.1.1.9
nwIpxFwdIfCtrAddrErrPkts mandatory
Indicates the total number of IPX packets that have been discarded
because of IPX addressing errors in the IPX header, during
nwIpxFwdIfCtrOperationalTime, on the router port for which the entry
exists.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52.4.2.2.2.3.2.2.2.2.2.1.1.10
nwIpxFwdIfCtrLenErrPkts mandatory
Indicates the total number of IPX packets that have been discarded
because an invalid packet length was contained in the IPX header,
during nwIpxFwdIfCtrOperationalTime, on the router port for which the
entry exists.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52.4.2.2.2.3.2.2.2.2.2.1.1.11
nwIpxFwdIfCtrHdrErrPkts mandatory
Indicates the total number of IPX packets that have been discarded
because of an invalid IPX header, during nwIpxFwdIfCtrOperationalTime,
on the router port for which the entry exists.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52.4.2.2.2.3.2.2.2.2.2.1.1.12
nwIpxFwdIfCtrInBytes mandatory
Indicates the total number of bytes in the IPX packets that have
been received, during nwIpxFwdIfCtrOperationalTime, on the router
port for which the entry exists.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52.4.2.2.2.3.2.2.2.2.2.1.1.13
nwIpxFwdIfCtrOutBytes mandatory
Indicates the total number of bytes in the IPX packets that have
been transmitted, during nwIpxFwdIfCtrOperationalTime, on the router
port for which the entry exists.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52.4.2.2.2.3.2.2.2.2.2.1.1.14
nwIpxFwdIfCtrFwdBytes mandatory
Indicates the total number of bytes in the IPX packets that have
been forwarded, during nwIpxFwdCtrOperationalTime, on the router port
for which the entry exists.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52.4.2.2.2.3.2.2.2.2.2.1.1.15
nwIpxFwdIfCtrFilteredBytes mandatory
Indicates the total number of bytes in the IPX packets
administratively filtered, during nwIpxFwdIfCtrOperationalTime, on
the router port for which the entry exists.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52.4.2.2.2.3.2.2.2.2.2.1.1.16
nwIpxFwdIfCtrDiscardBytes mandatory
Indicates the total number of bytes in the IPX packets that have
been discarded, during nwIpxFwdIfCtrOperationalTime, on the router
port for which the entry exists.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52.4.2.2.2.3.2.2.2.2.2.1.1.17
nwIpxFwdIfCtrHostInPkts mandatory
Indicates the total number of IPX packets that have been successfully
delivered to the local host, during nwIpxFwdIfCtrOperationalTime, that
were received on the router port for which the entry exists.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52.4.2.2.2.3.2.2.2.2.2.1.1.18
nwIpxFwdIfCtrHostOutPkts mandatory
Indicates the total number of IPX packets that have been forwarded
by the local host, during nwIpxFwdIfCtrOperationalTime, on the router
port for which the entry exists.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52.4.2.2.2.3.2.2.2.2.2.1.1.19
nwIpxFwdIfCtrHostDiscardPkts mandatory
Indicates the total number of IPX packets that have been discarded
by the local host, due to a lack of host resources, during
nwIpxFwdIfCtrOperationalTime, that were received on the router port
for which the entry exis…
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52.4.2.2.2.3.2.2.2.2.2.1.1.20
nwIpxFwdIfCtrHostInBytes mandatory
Indicates the total number of bytes in the IPX packets that have been
successfully delivered to the local host, during
nwIpxFwdIfCtrOperationalTime, that were received on the router port for
which the entry exists.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52.4.2.2.2.3.2.2.2.2.2.1.1.21
nwIpxFwdIfCtrHostOutBytes mandatory
Indicates the total number of bytes in the IPX packets that have been
transmitted by the local host, during nwIpxFwdIfCtrOperationalTime, on
the router port for which the entry exists.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52.4.2.2.2.3.2.2.2.2.2.1.1.22
nwIpxFwdIfCtrHostDiscardBytes mandatory
Indicates the total number of bytes in the IPX packets that have
been discarded by the local host, due to a lack of host resources
that were received, during nwIpxFwdIfCtrOperationalTime, that were
received on the rou…
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52.4.2.2.2.3.2.2.2.2.2.1.1.23

nwIpxRipIfTable

table mandatory
.1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.1.2.1.1 · 1 row entry · 17 columns
Open in standard view 
This table contains an entry for each router port. Each entry can
contain different values, allowing the routing protocol configuration
to vary from router port to router port. This table is indexed by
nwIpxRipIfIndex, which indicates the value of MIB 2 ifindex, which
identifies the router port for which each entry exists.
nwIpxRipIfEntry entry .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.1.2.1.1.1
Each entry contains the IPX-RIP configuration for the router port for
which the entry exists.
Indexes
nwIpxRipIfIndex
Column Syntax OID
nwIpxRipIfIndex mandatory
Indicates the value of MIB 2 ifindex, which identifies the router
port for which the entry exists.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.1.2.1.1.1.1
nwIpxRipIfAdminStatus mandatory
Sets the administrative state of the IPX-RIP routing protocol on the
router port for which the entry exists. Enabled (3) causes IPX-RIP to
become active on the router port. Disabled (2) causes RIP to become
inactive.
Enumerationr/w
Enumerated Values:
1other
2disabled
3enabled
 .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.1.2.1.1.1.2
nwIpxRipIfOperStatus mandatory
Indicates the current operating condition of the IPX-RIP routing
protocol on the router port for which the entry exists. The value of
nwIpxRipIfOperStatus indicates any problem with your IPX-RIP
configuration on the rou…
Enumeration
Enumerated Values:
1other
2disabled
3enabled
4pending-disable
5pending-enable
 .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.1.2.1.1.1.3
nwIpxRipIfOperationalTime mandatory
Indicates the elapsed time, in hundredths of a second, that
nwIpxRipIfOperStatus has been in its current state.
RFC1155-SMITimeTicks
Textual Convention: RFC1155-SMITimeTicks Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.1.2.1.1.1.4
nwIpxRipIfVersion mandatory
Indicates the revision level of the IPX-RIP routing protocol in
textual format.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.1.2.1.1.1.5
nwIpxRipIfAdvertisement mandatory
Sets the interval, in seconds, at which IPX-RIP advertises its route
table on the router port for which the entry exists. Change this value
to cause IPX-RIP to advertise its route table more or less frequently.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.1.2.1.1.1.6
nwIpxRipIfFloodDelay mandatory
Specifies the length of time, in seconds, that the IPX-RIP routing
protocol will wait after discovering that a directly connected route
has gone down, before flooding updates (triggered updates) on the
router port for w…
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.1.2.1.1.1.7
nwIpxRipIfRequestDelay mandatory
Specifies the length of time, in seconds, that the IPX-RIP routing
protocol will wait after receiving a route request packet before
sending a response on the router port for which the entry exists. A
value of 0 specifie…
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.1.2.1.1.1.8
nwIpxRipIfPriority mandatory
This object does not apply to this protocol. It is a common object,
inherited from the MIB framework used to provide a common management
interface to all the Cabletron Routing Services protocol-specific MIBs.
Setting th…
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.1.2.1.1.1.9
nwIpxRipIfHelloTimer mandatory
This object does not apply to this protocol. It is a common object,
inherited from the MIB framework used to provide a common management
interface to all the Cabletron Routing Services protocol-specific
MIBs. Setting t…
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.1.2.1.1.1.10
nwIpxRipIfSplitHorizon mandatory
Controls the operation of Split Horizon on the router port for which
the entry exists. When Split Horizon is enabled, IPX-RIP keeps track
of which router port route information is received on, and prevents
information a…
Enumerationr/w
Enumerated Values:
1other
2disabled
3enabled
 .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.1.2.1.1.1.11
nwIpxRipIfPoisonReverse mandatory
Controls the operation of Poison Reverse on the router port for
which the entry exists. When Poison Reverse is enabled, IPX-RIP
advertises any downed route as unreachable during the period of time
that it must wait (nwI…
Enumerationr/w
Enumerated Values:
1other
2disabled
3enabled
 .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.1.2.1.1.1.12
nwIpxRipIfSnooping mandatory
Controls the operation of IPX-RIP Snooping on the router port. When
RIP Snooping is enabled the IPX-RIP routing protocol operates in
passive mode, so that it receives route information, builds and
maintains a route tabl…
Enumerationr/w
Enumerated Values:
1other
2disabled
3enabled
 .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.1.2.1.1.1.13
nwIpxRipIfType mandatory
Indicates whether the directly connected network segment does or
does not support broadcast media access. If broadcast media access is
supported, IPX-RIP advertisements are sent out one broadcast packet
per router port…
Enumeration
Enumerated Values:
1other
2bma
3nbma
 .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.1.2.1.1.1.14
nwIpxRipIfXmitCost mandatory
This object does not apply to this protocol. It is a common object,
inherited from the common MIB framework used to provide a common
management interface to all the Cabletron Routing Services
protocol-specific MIBs. Set…
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.1.2.1.1.1.15
nwIpxRipIfAclIdentifier mandatory
Specifies the Access Control ID of the access control list in effect
for IPX-RIP routing protocol packets on the router port for which the
entry exists. A value of 0 indicates that there is no access control
list in eff…
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.1.2.1.1.1.16
nwIpxRipIfAclStatus mandatory
Controls the operation of the access control list identified by
nwIpxRipIfAclIdentifier. Enabled (3) applies the access control list
to all IPX-RIP routing protocol packet traffic on the router port for
which the entry…
Enumerationr/w
Enumerated Values:
1other
2disabled
3enabled
 .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.1.2.1.1.1.17

nwIpxRipIfCtrTable

table mandatory
.1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.1.2.2.1 · 1 row entry · 12 columns
Open in standard view 
This table contains an entry for each router port.This table is
indexed by nwIpxRipIfCtrIfIndex, which indicates the value of MIB2
ifindex, which indentifies the router port for which the entry exists.
nwIpxRipIfCtrEntry entry .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.1.2.2.1.1
Each entry indicates the current packet and byte count of IPX-RIP
routing protocol packets on the router port for which the entry
exists.
Indexes
nwIpxRipIfCtrIfIndex
Column Syntax OID
nwIpxRipIfCtrIfIndex mandatory
Indicates the value of MIB 2 ifindex, which identifies the router
port for which the entry exists.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.1.2.2.1.1.1
nwIpxRipIfCtrAdminStatus mandatory
Sets the administrative state of the per-port IPX-RIP packet and
byte counters on the router port for which the entry exists.
Enabled (3) causes these counters to become active. Disabled (2)
causes these counters to b…
Enumerationr/w
Enumerated Values:
1other
2disabled
3enabled
 .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.1.2.2.1.1.2
nwIpxRipIfCtrReset mandatory
Resets the per-port IPX-RIP packet and byte counters on the router
port for which this entry exists. Reset (2) resets the counters to 0.
nwIpxRipIfCtrOperationalTime is also reset to 0.
Enumerationr/w
Enumerated Values:
1other
2reset
 .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.1.2.2.1.1.3
nwIpxRipIfCtrOperationalTime mandatory
Indicates the elapsed time, in hundredths of a second, that
nwIpRipIfCtrAdminStatus has been in the current state.
RFC1155-SMITimeTicks
Textual Convention: RFC1155-SMITimeTicks Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.1.2.2.1.1.4
nwIpxRipIfCtrInPkts mandatory
Indicates the total number of IPX-RIP routing protocol packets that
have been received, during nwIpxRipIfCtrOperationalTime, on the router
port for which the entry exists.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.1.2.2.1.1.5
nwIpxRipIfCtrOutPkts mandatory
Indicates the total number of IPX-RIP routing protocol packets that
have been transmitted, during nwIpxRipIfCtrOperationalTime, on the
router port for which the entry exists.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.1.2.2.1.1.6
nwIpxRipIfCtrFilteredPkts mandatory
Indicates the total number of IPX-RIP routing protocol packets that
have been administratively filtered, during
nwIpxRipIfCtrOperationalTime, on the router port for which the entry
exists.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.1.2.2.1.1.7
nwIpxRipIfCtrDiscardPkts mandatory
Indicates the total number of IPX-RIP routing protocol packets that
have been discarded, during nwIpxRipIfCtrOperationalTime, that were
received on the router port for which the entry exists.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.1.2.2.1.1.8
nwIpxRipIfCtrInBytes mandatory
Indicates the total number of bytes in the IPX-RIP routing protocol
packets that have been received, during nwIpxRipIfCtrOperationalTime,
on the router port for which the entry exists.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.1.2.2.1.1.9
nwIpxRipIfCtrOutBytes mandatory
Indicates the total number of bytes in the IPX-RIP routing protocol
packets that have been transmitted, during
nwIpxRipIfCtrOperationalTime, on the router port for which the entry
exists.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.1.2.2.1.1.10
nwIpxRipIfCtrFilteredBytes mandatory
Indicates the total number of bytes in the IPX-RIP routing protocol
packets that have been administratively filtered, during
nwIpxRipIfCtrOperationalTime, on the router port for which the entry
exists.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.1.2.2.1.1.11
nwIpxRipIfCtrDiscardBytes mandatory
Indicates the total number of bytes in the IPX-RIP routing protocol
packets that have been discarded, during nwIpRipIfCtrOperationalTime,
that were received on the router port for which the entry exists.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.1.2.2.1.1.12

nwIpxRipRouteTable

table mandatory
.1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.1.3.1 · 1 row entry · 8 columns
Open in standard view 
This table contains the IPX-RIP route table. This table contains an
entry for each route learned through the IPX-RIP routing protocol. 
Only the best routes from this table are added to the IPX forwarding
table to be used for packet switching.
nwIpxRipRouteEntry entry .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.1.3.1.1
Each entry describes the IPX-RIP route to the destination network
for which the entry exists.
Indexes
nwIpxRipRtNetId nwIpxRipRtIfIndex nwIpxRipRtSrcNode
Column Syntax OID
nwIpxRipRtNetId mandatory
This is the primary index into the IPX-RIP route table. This number
indicates the Novell Network Number of the destination for which the
entry exists. The IpxAddress consists of a network number of 4 octets
IpxAddress
Textual Convention: IpxAddress OctetString
 .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.1.3.1.1.1
nwIpxRipRtIfIndex mandatory
This is a secondary index into the IPX-RIP route table. This number
corresponds to the value of MIB 2 ifindex, which identifies the router
port for which the entry exists.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.1.3.1.1.2
nwIpxRipRtSrcNode mandatory
This is a secondary index into the RIP route table. This number
indicates the MAC-layer address of the source router from which this
route was learned. A value of 0.0.0.0.0.0 indicates that the source
is on the network …
IpxAddress
Textual Convention: IpxAddress OctetString
 .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.1.3.1.1.3
nwIpxRipRtHops mandatory
Indicates the number of hops required to reach the destination for
which the entry exists.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.1.3.1.1.4
nwIpxRipRtTicks mandatory
Indicates the amount of time (number of Time Ticks) required to
reach the destination for which the entry exists.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.1.3.1.1.5
nwIpxRipRtAge mandatory
Indicates the amount of time, in seconds, since an update has been
received for the route for which the entry exists.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.1.3.1.1.6
nwIpxRipRtType mandatory
Indicates whether the destination network is directly connected
through the router port specified by nwIpxRipRtIndex, or is
indirectly connected through another router, specified by
nwIpxRipRtSrcNode.
Enumeration
Enumerated Values:
1other
2invalid
3direct
4remote
 .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.1.3.1.1.7
nwIpxRipRtFlags mandatory
Specifies properties of the IPX-RIP route. The bit mask is as
follows: source-changed (1), best source (2), local-net (4),
net-down (8), update-fib-only (16).
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.1.3.1.1.8

nwIpxSapIfTable

table mandatory
.1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.2.1.1 · 1 row entry · 17 columns
Open in standard view 
This table contains an entry for each router port. Each entry can
contain different values, allowing the SAP configuration to vary from
router port to router port. This table is indexed by nwIpxSapIfIndex,
which indicates the value of MIB 2 ifindex, which identifies the router
port for which each entry exists.
nwIpxSapIfEntry entry .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.2.1.1.1
Each entry contains the SAP configuration for the router port for
which the entry exists.
Indexes
nwIpxSapIfIndex
Column Syntax OID
nwIpxSapIfIndex mandatory
Indicates the value of MIB 2 ifindex, which identifies the router
port for which the entry exists.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.2.1.1.1.1
nwIpxSapIfAdminStatus mandatory
Sets the administrative state of the SAP protocol on the router port
for which the entry exists. Enabled (3) causes SAP to become active
on the router port. Disabled (2) causes SAP to become inactive.
Enumerationr/w
Enumerated Values:
1other
2disabled
3enabled
 .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.2.1.1.1.2
nwIpxSapIfOperStatus mandatory
Indicates the current operating condition of the SAP protocol on the
router port for which the entry exists. The value of
nwIpxSapIfOperStatus indicates any problem with your SAP configuration
on the router port. A valu…
Enumeration
Enumerated Values:
1other
2disabled
3enabled
4pending-disable
5pending-enable
 .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.2.1.1.1.3
nwIpxSapIfOperationalTime mandatory
Indicates the elapsed time, in hundredths of a second, that
nwIpxSapIfOperStatus has been in its current state.
RFC1155-SMITimeTicks
Textual Convention: RFC1155-SMITimeTicks Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.2.1.1.1.4
nwIpxSapIfVersion mandatory
Indicates the revision level of the SAP protocol in textual format.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.2.1.1.1.5
nwIpxSapIfAdvertisement mandatory
Sets the interval, in seconds, at which SAP advertises its server
table on the router port for which the entry exists. Change this value
to cause SAP to advertise its server table more or less frequently.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.2.1.1.1.6
nwIpxSapIfFloodDelay mandatory
Specifies the length of time, in seconds, that the SAP protocol will
wait after discovering that a directly connected route has gone down,
before flooding updates (triggered updates) on the router port for
which the ent…
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.2.1.1.1.7
nwIpxSapIfRequestDelay mandatory
Specifies the length of time, in seconds, that the SAP protocol will
wait after receiving a server request packet, before sending a
response on the router port for which the entry exists. A value of 0
specifies that if …
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.2.1.1.1.8
nwIpxSapIfPriority mandatory
This object does not apply to this protocol. It is a common object,
inherited from the MIB framework used to provide a management
interface to all the Cabletron Routing Services protocol-specific
MIBs. Setting this obj…
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.2.1.1.1.9
nwIpxSapIfHelloTimer mandatory
This object does not apply to this protocol. It is a common object,
inherited from the MIB framework used to provide a management
interface to all the Cabletron Routing Services protocol-specific
MIBs.Setting this objec…
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.2.1.1.1.10
nwIpxSapIfSplitHorizon mandatory
Controls the operation of Split Horizon on the router port for which
the entry exists. When Split Horizon is enabled, SAP keeps track of
which router port information is received on, and prevents information
about a ser…
Enumerationr/w
Enumerated Values:
1other
2disabled
3enabled
 .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.2.1.1.1.11
nwIpxSapIfPoisonReverse mandatory
Controls the operation of Poison Reverse on the router port for
which the entry exists. When Poison Reverse is enabled, SAP
advertises any downed server as unreachable during the period of time
that it must wait (nwIpxS…
Enumerationr/w
Enumerated Values:
1other
2disabled
3enabled
 .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.2.1.1.1.12
nwIpxSapIfSnooping mandatory
Controls the operation of SAP Snooping on the router port. When SAP
Snooping is enabled SAP operates in passive mode, so it receives
service information, builds and maintains a server table, but does
not advertise or se…
Enumerationr/w
Enumerated Values:
1other
2disabled
3enabled
 .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.2.1.1.1.13
nwIpxSapIfType mandatory
Indicates whether the directly connected network segment does or
does not support broadcast media access. If broadcast media access is
supported, SAP advertisements are sent out, one broadcast packet per
router port. If…
Enumeration
Enumerated Values:
1other
2bma
3nbma
 .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.2.1.1.1.14
nwIpxSapIfXmitCost mandatory
This object does not apply to this protocol. It is a common object,
inherited from the MIB framework used to provide a common management
interface to all the Cabletron Routing Services protocol-specific MIBs.
Setting th…
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.2.1.1.1.15
nwIpxSapIfAclIdentifier mandatory
Specifies the Access Control List ID of the access control list in
effect for SAP protocol packets on the router port for which the entry
exists. A value of 0 indicates that there is no access control list
in effect fo…
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.2.1.1.1.16
nwIpxSapIfAclStatus mandatory
Controls the operation of the access control list identified by
nwIpxSapIfAclIdentifier. Enabled (3) causes the access control list
to be applied to all SAP protocol packet traffic on the router port
for which the entr…
Enumerationr/w
Enumerated Values:
1other
2disabled
3enabled
 .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.2.1.1.1.17

nwIpxSapIfCtrTable

table mandatory
.1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.2.2.1 · 1 row entry · 12 columns
Open in standard view 
This table contains an entry for each router port. This table is
indexed by nwIpxSapIfCtrIfIndex which indicates the value of MIB2
ifindex, which indentifies the router port for which the entry 
exists.
nwIpxSapIfCtrEntry entry .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.2.2.1.1
Each entry indicates the current packet and byte count of SAP
protocol packets on the router port for which the entry exists.
Indexes
nwIpxSapIfCtrIfIndex
Column Syntax OID
nwIpxSapIfCtrIfIndex mandatory
Indicates the value of the MIB 2 ifindex, which identifies the router
port for which the entry exists.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.2.2.1.1.1
nwIpxSapIfCtrAdminStatus mandatory
Sets the administrative state of the per-port SAP packet and byte
counters on the router port for which this entry exists. Enabled (3)
causes these counters to become active. Disabled (2) causes these
counters to become…
Enumerationr/w
Enumerated Values:
1other
2disabled
3enabled
 .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.2.2.1.1.2
nwIpxSapIfCtrReset mandatory
Resets the per-port SAP packet and byte counters on the router port
for which the entry exists. Reset (2) resets the counters to 0.
nwIpxSapIfCtrOperationalTime is also reset to 0.
Enumerationr/w
Enumerated Values:
1other
2reset
 .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.2.2.1.1.3
nwIpxSapIfCtrOperationalTime mandatory
Indicates the elapsed time, in hundredths of a second, that
nwIpxSapIfCtrAdminStatus has been in the current state.
RFC1155-SMITimeTicks
Textual Convention: RFC1155-SMITimeTicks Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.2.2.1.1.4
nwIpxSapIfCtrInPkts mandatory
Indicates the total number of SAP protocol packets that have been
received, during nwIpxSapIfCtrOperationalTime, on the router port for
which the entry exists.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.2.2.1.1.5
nwIpxSapIfCtrOutPkts mandatory
Indicates the total number of SAP packets that have been transmitted,
during nwIpxSapIfCtrOperationalTime, on the router port for which the
entry exists.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.2.2.1.1.6
nwIpxSapIfCtrFilteredPkts mandatory
Indicates the total number of SAP packets that have been
administratively filtered, during nwIpxSapIfCtrOperationalTime, on
the router port for which the entry exists.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.2.2.1.1.7
nwIpxSapIfCtrDiscardPkts mandatory
Indicates the total number of SAP packets that have been discarded,
during nwIpxSapIfCtrOperationalTime, that were received on the router
port for which the entry exists.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.2.2.1.1.8
nwIpxSapIfCtrInBytes mandatory
Indicates the total number of bytes in the SAP packets that have
been received, during nwIpxSapIfCtrOperationalTime, on the router port
for which the entry exists.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.2.2.1.1.9
nwIpxSapIfCtrOutBytes mandatory
Indicates the total number of bytes in the SAP packets that have been
transmitted, during nwIpxSapIfCtrOperationalTime, on the router port
for which the entry exists.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.2.2.1.1.10
nwIpxSapIfCtrFilteredBytes mandatory
Indicates the total number of bytes in the SAP packets that have been
administratively filtered, during nwIpxSapIfCtrOperationalTime, on the
router port for which the entry exists.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.2.2.1.1.11
nwIpxSapIfCtrDiscardBytes mandatory
Indicates the total number of bytes in the SAP packets that have
been discarded, during nwIpxSapIfCtrOperationalTime, that were
received on the router port for which the entry exists.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.2.2.1.1.12

nwIpxSapServerIfTable

table mandatory
.1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.3.1 · 1 row entry · 11 columns
Open in standard view 
The table contains the SAP server table. This table contains an entry
for each service learned of through the SAP protocol.
nwIpxSapServerIfEntry entry .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.3.1.1
Each entry contains the SAP route information for the Novell server
and router port for which the entry exists.
Indexes
nwIpxSapServerIfNetId nwIpxSapServerIfNode nwIpxSapServerIfSocket nwIpxSapServerIfServiceType nwIpxSapServerIfIfNum nwIpxSapServerIfSrcNode
Column Syntax OID
nwIpxSapServerIfNetId mandatory
This is the primary index into the SAP server table. This number
corresponds to the Novell Network Number of the server offering the
service. The network number consists of 4 octets.
IpxAddress
Textual Convention: IpxAddress OctetString
 .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.3.1.1.1
nwIpxSapServerIfNode mandatory
This is a secondary index into the SAP Server Table. This is the
MAC-layer address represented as an octetstring of the service
offering the server for which the entry exists, represented as an
octet string.
OctetString .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.3.1.1.2
nwIpxSapServerIfSocket mandatory
This is a secondary index into the SAP Server Table. This is the
socket number of the server application for which the entry exists.
OctetString .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.3.1.1.3
nwIpxSapServerIfServiceType mandatory
This is a secondary index into the SAP Server Table. This is the
service type of the server application for which the entry exists.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.3.1.1.4
nwIpxSapServerIfIfNum mandatory
Indicates the value of MIB 2 ifindex, which identifies the router
port through which the service for which the entry exits is available.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.3.1.1.5
nwIpxSapServerIfSrcNode mandatory
This is the MAC-layer address of the neighbor router from which the
service was learned about.
OctetString .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.3.1.1.6
nwIpxSapServerIfName mandatory
This is the name of the server offering the service for which the
entry exists.
OctetString .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.3.1.1.7
nwIpxSapServerIfHops mandatory
Indicates the number of hops required to reach the server offering
the service for which the entry exists.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.3.1.1.8
nwIpxSapServerIfAge mandatory
Indicates the amount of time since a SAP update was last received
for the server and service for which the entry exits.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.3.1.1.9
nwIpxSapServerIfType mandatory
Indicates whether the server is on a network that is directly
connected through the router port for which the entry exists, or is
indirectly connected through another router specified by the value of
nwIpxSapServerIfSrc…
Enumeration
Enumerated Values:
1other
2invalid
3direct
4remote
 .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.3.1.1.10
nwIpxSapServerIfFlags mandatory
Specifies properties of the SAP service for which the entry exist.
The bit mask is as follows: source-changed (1), best-source (2), not
used (4), net-down (8), not used (16).
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.3.1.1.11

nwIpxFibTable

table mandatory
.1.3.6.1.4.1.52.4.2.2.2.3.2.2.5.1 · 1 row entry · 7 columns
Open in standard view 
This table contains an entry describing each route being used to
forward IPX traffic to each destination Novell network and node.
nwIpxFibEntry entry .1.3.6.1.4.1.52.4.2.2.2.3.2.2.5.1.1
Each entry describes the route to the destination Novell network and
node for which the entry exists.
Indexes
nwIpxFibNetId
Column Syntax OID
nwIpxFibNetId mandatory
Specifies the Novell Network Number of the destination for which the
entry exists. The IpxAddress consists of four octets
IpxAddress
Textual Convention: IpxAddress OctetString
 .1.3.6.1.4.1.52.4.2.2.2.3.2.2.5.1.1.1
nwIpxFibHops mandatory
Indicates the number of hops required to reach the destination for
which the entry exists. It is considered as metric 1.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.2.2.2.3.2.2.5.1.1.2
nwIpxFibTimeTicks mandatory
Indicates the amount of time, indicated by the number of TimeTicks,
required for a packet to reach the destination network for which the
entry exists. It is considered as metric 2.
RFC1155-SMITimeTicksr/w
Textual Convention: RFC1155-SMITimeTicks Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52.4.2.2.2.3.2.2.5.1.1.3
nwIpxFibNextHopIf mandatory
Indicates the router port through which the next hop node is
available. Packets destined for the network specified by the value of
nwIpxFibNetId will be forwarded on this port.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.2.2.2.3.2.2.5.1.1.4
nwIpxFibNextHopNet mandatory
Indicates the Novell Network Number portion of the fully formed next
hop IPX Address of the next hop node.
OctetStringr/w .1.3.6.1.4.1.52.4.2.2.2.3.2.2.5.1.1.5
nwIpxFibNextHopNode mandatory
Indicates the node portion of the fully formed next hop IPX Address.
r/w .1.3.6.1.4.1.52.4.2.2.2.3.2.2.5.1.1.6
nwIpxFibRouteType mandatory
Indicates the status of the route. A value of 3 indicates that the
destination is on the network segment that is directly connected to
the router port identified by nwIpxFibNextHopIf. A value of 4 indicates
that the des…
Enumerationr/w
Enumerated Values:
1other
2invalid
3direct
4remote
 .1.3.6.1.4.1.52.4.2.2.2.3.2.2.5.1.1.7

nwIpxHostMapTable

table mandatory
.1.3.6.1.4.1.52.4.2.2.2.3.2.2.6.3.1 · 1 row entry · 7 columns
Open in standard view 
The Ipx Address translation table used for mapping 
an IPX address to a circuit identifier (if applicable), 
corresponding port number, and framing type.
nwIpxHostMapEntry entry .1.3.6.1.4.1.52.4.2.2.2.3.2.2.6.3.1.1
Each entry contains one IpxAddress to circuit
equivalence. Also provided is the framing required to
converse with this host, and the corresponding logical
port number.
Indexes
nwIpxHostMapIfIndex nwIpxHostMapIpxAddr
Column Syntax OID
nwIpxHostMapIfIndex mandatory
This is the primary (major) index into the Ipx HostMap
table. This number corresponds to the index into the MIB-2
Interfaces Group which describes the IPX router port for which
the entry exists.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.2.2.2.3.2.2.6.3.1.1.1
nwIpxHostMapIpxAddr mandatory
The IpxAddress of the host on the corresponding interface
and circuit (if applicable). The IpxAddress consists of a network
number of 4 octets followed by 6 octets of node identifier.
IpxAddress
Textual Convention: IpxAddress OctetString
 .1.3.6.1.4.1.52.4.2.2.2.3.2.2.6.3.1.1.2
nwIpxHostMapPhysAddr mandatory
The media-dependent 'physical' address. The value of
this object is 0 for entries indicating native-wan(8)
framing.
RFC1213-MIBPhysAddressr/w
Textual Convention: RFC1213-MIBPhysAddress OctetString
 .1.3.6.1.4.1.52.4.2.2.2.3.2.2.6.3.1.1.3
nwIpxHostMapType mandatory
Setting this object to the value invalid(2) has
the effect of invalidating the corresponding entry in the
nwIpxHostMapTable. That is, it effectively dissasociates the
circuit and/or interface identified with said entr…
Enumerationr/w
Enumerated Values:
1other
2invalid
3dynamic
4static
5inactive
 .1.3.6.1.4.1.52.4.2.2.2.3.2.2.6.3.1.1.4
nwIpxHostMapCircuitID mandatory
The identifier for the virtual circuit present on the
interface. On an interface configured for Frame Relay,
this number is the DLCI for the IPX Address at the end of
the circuit. For non-WAN interfaces, the value of t…
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.2.2.2.3.2.2.6.3.1.1.5
nwIpxHostMapFraming mandatory
Specifies the framing type required to converse with the
host for which this entry exists.
Enumerationr/w
Enumerated Values:
1other
2ethernet
3snap
4i8022
6novell
8nativewan
9encapenet
10encapenet8022
11encapenetsnap
12encapenetnovell
13encaptr8022
14encaptrsnap
15encapfddi8022
16encapfddisnap
17canonical
 .1.3.6.1.4.1.52.4.2.2.2.3.2.2.6.3.1.1.6
nwIpxHostMapPortNumber mandatory
The unique value for the logical port number. It's value
ranges between 1 and a maximum value which is dependent on both
the number of configured interfaces in the system and the number
of circuits present on those inte…
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.2.2.2.3.2.2.6.3.1.1.7

nwIpxAclTable

table mandatory
.1.3.6.1.4.1.52.4.2.2.2.3.2.2.7.2 · 1 row entry · 10 columns
Open in standard view 
This table contains the access control list information for IPX
traffic. This table contains entries, each of which allows packet
forwarding between source/destination pairs to be permitted or denied.
The list is identified by the Access Control List ID. Each list may
contain multiple entries ordered by sequence number. When a particular
access control list is searched, it is searched in sequence number
order and the first match found ends the search. If no match if found,
access defaults to permitted.
nwIpxAclEntry entry .1.3.6.1.4.1.52.4.2.2.2.3.2.2.7.2.1
Each entry contains IPX source/destination access information.
Indexes
nwIpxAclIdentifier nwIpxAclSequence
Column Syntax OID
nwIpxAclIdentifier mandatory
This is the primary (major) index into the IPX access control list
table. This value identifies the access control list by a unique
identifier (at least 1) arbitrarily assigned by the user. All entries
that have the sam…
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.2.2.2.3.2.2.7.2.1.1
nwIpxAclSequence mandatory
This is the secondary (minor) index into the IPX access control list
table. This number corresponds to a sequence number used to order
multiple entries within the same access control list.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.2.2.2.3.2.2.7.2.1.2
nwIpxAclPermission mandatory
Specifies whether access is allowed or denied between the source and
destination address pair. Note that source and destination are
interchangeable when bi-directional control is selected. To remove an
existing entry se…
Enumerationr/w
Enumerated Values:
1other
2invalid
3permit
4deny
5permit-bidirectional
6deny-bidirectional
 .1.3.6.1.4.1.52.4.2.2.2.3.2.2.7.2.1.3
nwIpxAclMatches mandatory
Indicates the number of matches on this entry that have resulted in
the permit/deny access restriction being applied as part of the
forwarding process.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52.4.2.2.2.3.2.2.7.2.1.4
nwIpxAclDestNetNum mandatory
Specifies the destination Novell Network Number used to compare for
matches on the access control list. A 0 value is a wildcard which
matches any Novell Network Number.
OctetStringr/w .1.3.6.1.4.1.52.4.2.2.2.3.2.2.7.2.1.5
nwIpxAclDestNode mandatory
Specifies the MAC-layer address of the destination node (represented
as an octet string), used to compare for matches on the access control
list. A value 0 is a wildcard, which matches any node.
OctetStringr/w .1.3.6.1.4.1.52.4.2.2.2.3.2.2.7.2.1.6
nwIpxAclDestSocket mandatory
Specifies the socket number of the destination socket used to compare
for matches on the access control list. A 0 value is a wildcard
matching any socket.
OctetStringr/w .1.3.6.1.4.1.52.4.2.2.2.3.2.2.7.2.1.7
nwIpxAclSrcNetNum mandatory
Specifies the Novell Network Number of the source Novell Network used
to compare for matches on the access control list. A 0 value is a
wildcard matching any Novell Network Number.
OctetStringr/w .1.3.6.1.4.1.52.4.2.2.2.3.2.2.7.2.1.8
nwIpxAclSrcNode mandatory
Specifies the MAC-layer address of the source node (represented as an
octet string), used to compare for matches on the Access Control
List. A 0 value is a wildcard matching any node.
OctetStringr/w .1.3.6.1.4.1.52.4.2.2.2.3.2.2.7.2.1.9
nwIpxAclSrcSocket mandatory
Specifies the socket number of the source socket to compare for
matches on the Access Control List. A 0 value is a wildcard matching
any socket.
OctetStringr/w .1.3.6.1.4.1.52.4.2.2.2.3.2.2.7.2.1.10

nwIpxNetBIOSIfTable

table mandatory
.1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.1.2.1.1 · 1 row entry · 4 columns
Open in standard view 
This table contains an entry for each router port. Each entry can
contain different values, allowing the NetBIOS Broadcast Redirector
configuration to vary from router port to router port. This table is
indexed by nwIpxNetBIOSIfIndex, which indicates the value of MIB 2
ifindex, which identifies the router port for which the entry exists.
nwIpxNetBIOSIfEntry entry .1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.1.2.1.1.1
Each entry contains the IPX NetBIOS broadcasting configuration for
the router port for which the entry exists.
Indexes
nwIpxNetBIOSIfIndex
Column Syntax OID
nwIpxNetBIOSIfIndex mandatory
Indicates the value in MIB 2 ifindex, which identifies the router
port for which the entry exists.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.1.2.1.1.1.1
nwIpxNetBIOSIfAdminStatus mandatory
Sets the administrative state of IPX NetBIOS broadcasting on the
router port for which the entry exists. Enabled (3) causes this
router port to become active. Disabled (2) causes it to become
inactive.
Enumerationr/w
Enumerated Values:
1other
2disabled
3enabled
 .1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.1.2.1.1.1.2
nwIpxNetBIOSIfOperStatus mandatory
Indicates the current operating condition of IPX NetBIOS
broadcasting on the IPX router port for which the entry exists.
Enumeration
Enumerated Values:
1other
2disabled
3enabled
4pending-disable
5pending-enable
6invalid-config
 .1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.1.2.1.1.1.3
nwIpxNetBIOSIfOperationalTime mandatory
Indicates the elapsed time, in hundredths of a second, that IPX
NetBIOS broadcasting, nwIpxNetBIOSIfOperStatus, has been in its
current state on the router port for which the entry exists.
RFC1155-SMITimeTicks
Textual Convention: RFC1155-SMITimeTicks Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.1.2.1.1.1.4

nwIpxNetBIOSIfCtrTable

table mandatory
.1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.1.2.2.1 · 1 row entry · 12 columns
Open in standard view 
This table contains the IPX NetBIOS packet and byte counters for each
router port on this device.
nwIpxNetBIOSIfCtrEntry entry .1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.1.2.2.1.1
This is the primary index into the NetBIOS Interface Counter Table.
This number corresponds to the index into the MIB 2 Interface Table
which describes the router port for which this entry exists.
Indexes
nwIpxNetBIOSIfCtrIfIndex
Column Syntax OID
nwIpxNetBIOSIfCtrIfIndex mandatory
This is the primary index into the IPX NetBIOS Interface Counter Table.
This number correspoonds to the index into the MIB 2 Interface Table
which describes the router port for which the entry exists.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.1.2.2.1.1.1
nwIpxNetBIOSIfCtrAdminStatus mandatory
Sets the administrative state of the IPX NetBIOS packet and bytes
counters on the IPX router port for which the entry exists. Enabled (3)
causes these counters to become active on the configured NetBIOS router
port. Dis…
Enumerationr/w
Enumerated Values:
1other
2disabled
3enabled
 .1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.1.2.2.1.1.2
nwIpxNetBIOSIfCtrReset mandatory
Resets the NetBIOS packet and bvyte counters on the router port for
which the entry exists. Reset (2) resets the interface-specific
counters to 0. nwIpxNetBIOSIfCtrOperationalTime is also reset to 0.
Enumerationr/w
Enumerated Values:
1other
2reset
 .1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.1.2.2.1.1.3
nwIpxNetBIOSIfCtrOperationalTime mandatory
Indicates the amount of time, in hundredths of a second, that the
interface-specific NetBIOS packet and byte counters have been active on
the router port for which the entry exists.
RFC1155-SMITimeTicks
Textual Convention: RFC1155-SMITimeTicks Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.1.2.2.1.1.4
nwIpxNetBIOSIfCtrInPkts mandatory
Indicates the total number of NetBIOS packets that have been recieved,
on the router port for which the entry exists, during
nwIpxNetBIOSIfCtrOperationalTime.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.1.2.2.1.1.5
nwIpxNetBIOSIfCtrOutPkts mandatory
Indicates the total number of NetBIOS packets that have been
transmitted, on the router port for which the entry exists, during
nwIpxNetBIOSIfCtrOperationallTime.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.1.2.2.1.1.6
nwIpxNetBIOSIfCtrFilteredPkts mandatory
Indicates the total number of NetBIOS packets that have been
administratively filtered, on the router port for which the entry
exists, during nwIpxNetBIOSIfCtrOperationalTime.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.1.2.2.1.1.7
nwIpxNetBIOSIfCtrDiscardPkts mandatory
Indicates the total number of NetBIOS packets that have been discarded,
on the router port for which the entry exists, during
nwIpxNetBIOSIfCtrOperationalTime.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.1.2.2.1.1.8
nwIpxNetBIOSIfCtrInBytes mandatory
Indicates the total number of bytes in the NetBIOS packets that have
been recieved, on the router port for which the entry exists, during
nwIpxNetBIOSIfCtrOperationalTime.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.1.2.2.1.1.9
nwIpxNetBIOSIfCtrOutBytes mandatory
Indicates the total number of bytes in the NetBIOS packets that have
been transmitted, on the router port for which the entry exists, during
nwIpxNetBIOSIfCtrOperationalTime.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.1.2.2.1.1.10
nwIpxNetBIOSIfCtrFilteredBytes mandatory
Indicates the total number of bytes in the NetBIOS packets that have
been administratively filtered, that were recieved on the router port
for which the entry exists during nwIpxNetBIOSIfCtrOperationalTime.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.1.2.2.1.1.11
nwIpxNetBIOSIfCtrDiscardBytes mandatory
Indicates the total number of bytes in the NetBIOS packets that have
been discarded, on the router port for which the entry exists, during
nwIpxNetBIOSIfCtrOperationalTime.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.1.2.2.1.1.12

nwIpxBcastIfTable

table mandatory
.1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.2.2.1.1 · 1 row entry · 4 columns
Open in standard view 
This table contains an entry for each router port configured for the
IPX distance-vector based routing protocol. Each entry can contain
different values, allowing the routing protocol configuration to
vary from router port to router port. This table is indexed by
nwIpxBcastIfIndex, which indicates the value of MIB 2 ifindex, which
identifies the router port for which the entry exists.
nwIpxBcastIfEntry entry .1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.2.2.1.1.1
Specifies the IPX Broadcast configuration information for the
logical IPX interface for which this entry exists.
Indexes
nwIpxBcastIfIndex
Column Syntax OID
nwIpxBcastIfIndex mandatory
This index corresponds to the primary index into the MIB 2 Interface
Table, which describes the router port for which the entry exists.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.2.2.1.1.1.1
nwIpxBcastIfAdminStatus mandatory
Sets the administrative state of the IPX Broadcast on the router
port for which the entry exists. Enabled (2) causes IPX Broadcast on
this router port to become active. Disabled (2) causes IPX Broadcast
to become inacti…
Enumerationr/w
Enumerated Values:
1other
2disabled
3enabled
 .1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.2.2.1.1.1.2
nwIpxBcastIfOperStatus mandatory
Indicates the current operating condition of the IPX Broadcast on
the router port for which the entry exists.
Enumeration
Enumerated Values:
1other
2disabled
3enabled
4pending-disable
5pending-enable
6invalid-config
 .1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.2.2.1.1.1.3
nwIpxBcastIfOperationalTime mandatory
Indicates the elapsed time, in hundredths of a second, that
nwIPXBcastIfOperStatus has been in its current state.
RFC1155-SMITimeTicks
Textual Convention: RFC1155-SMITimeTicks Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.2.2.1.1.1.4

nwIpxBcastIfCtrTable

table mandatory
.1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.2.2.2.1 · 1 row entry · 12 columns
Open in standard view 
This table contains the IPX Broadcast packet and byte counters for each
router port on this device.
nwIpxBcastIfCtrEntry entry .1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.2.2.2.1.1
This is the primary index into the Broadcast Interface Counter Table.
This number corresponds to the index into the MIB 2 Interface Table
which describes the router port for which the entry exists.
Indexes
nwIpxBcastIfCtrIfIndex
Column Syntax OID
nwIpxBcastIfCtrIfIndex mandatory
This is the primary index into the IPX Broadcast Interface Counter
Table. This number corresponds to the index into the MIB 2 Interface
Table which describes the router port for which the entry exists.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.2.2.2.1.1.1
nwIpxBcastIfCtrAdminStatus mandatory
Sets the administrative state of the IPX Broadcast packet and byte
counters on the router port for which the entry exists. Enabled (3)
causes these counters to become acive on the configured IPX Broadcast
router port. D…
Enumerationr/w
Enumerated Values:
1other
2disabled
3enabled
 .1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.2.2.2.1.1.2
nwIpxBcastIfCtrReset mandatory
Resets the IPX Broadcast packet and byte counters on the router port for
which the entry exists. Reset (2) resets the interface-specific counters
to 0. nwIpxBcastIfCtrOperationalTime is also reset to 0.
Enumerationr/w
Enumerated Values:
1other
2reset
 .1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.2.2.2.1.1.3
nwIpxBcastIfCtrOperationalTime mandatory
Indicates the amount of time, in hundredths of a second, that the
interface-specific IPX Broadcast packet and byte counters have been in
the current administrative state on the router port for which the entry
exists.
RFC1155-SMITimeTicks
Textual Convention: RFC1155-SMITimeTicks Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.2.2.2.1.1.4
nwIpxBcastIfCtrInPkts mandatory
Indicates the total number of IPX Broadcast packets that have been
recieved, on the router port for which the entry exists, during
nwIpxBcastIfCtrOperationalTime.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.2.2.2.1.1.5
nwIpxBcastIfCtrOutPkts mandatory
Indicates the total number of Broadcast packets that have been
transmitted, on the router port for which the entry existsl, during
nwIpxBcastIfCtrOperationalTime.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.2.2.2.1.1.6
nwIpxBcastIfCtrFilteredPkts mandatory
Indicates the total number of IPX Broadcast packets that have been
administratively filtered, on the router port for which the entry
exists, during nwIpxBcastIfCtrOperationalTime.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.2.2.2.1.1.7
nwIpxBcastIfCtrDiscardPkts mandatory
Indicates the total number of Broadcast packets that have been dis-
carded, on the router port for which the entry exists, during
nwIpxBcastIfCtrOperationalTime.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.2.2.2.1.1.8
nwIpxBcastIfCtrInBytes mandatory
Indicates the total number of bytes in the IPX Broadcast packets that
have been recieved, on the router port for which the entry exists,
during nwIpxBcastIfCtrOperationalTime.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.2.2.2.1.1.9
nwIpxBcastIfCtrOutBytes mandatory
Indicates the total number of bytes in the IPX Broadcast packets that
have been transmitted, on the router port for which the entry exists,
during nwIpxBcastIfCtrOperationalTime.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.2.2.2.1.1.10
nwIpxBcastIfCtrFilteredBytes mandatory
Indicates the total number of bytes in the IPX Broadcast packets that
have been administratively filtered on the router port for which the
entry exists during nwIpxBcastIfCtrOperationalTime.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.2.2.2.1.1.11
nwIpxBcastIfCtrDiscardBytes mandatory
Indicates the total number of bytes in the IPX Broadcast packets that
have been discarded on the router port for which the entry exists,
during nwIpxBcastIfCtrOperationalTime.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.2.2.2.1.1.12

nwIpxEchoIfTable

table mandatory
.1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.3.2.1.1 · 1 row entry · 4 columns
Open in standard view 
This table contains an entry for each router port configured for IPX
Echo. Each entry can contain different values, allowing the routing
protocol configuration to vary from router port to router port. This
table is indexed by nwIpxEchoIfIndex, which indicates the value of
MIB 2 ifindex, which identifies the router port for which the entry
exists.
nwIpxEchoIfEntry entry .1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.3.2.1.1.1
Specifies the IPX Echo information for the logical IPX interface for
which the entry exists.
Indexes
nwIpxEchoIfIndex
Column Syntax OID
nwIpxEchoIfIndex mandatory
This index corresponds to the primary index into the MIB 2 ifTable,
which describes the router port for which the entry exists.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.3.2.1.1.1.1
nwIpxEchoIfAdminStatus mandatory
Sets the administrative state of IPX Echo on the router port for
which the entry exists. Enabled (2) causes this router port to
become active. Disabled (3) causes this router port to become
inactive.
Enumerationr/w
Enumerated Values:
1other
2disabled
3enabled
 .1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.3.2.1.1.1.2
nwIpxEchoIfOperStatus mandatory
Indicates the current operating condition of IPX Echo on the router
port for which the entry exists.
Enumeration
Enumerated Values:
1other
2disabled
3enabled
4pending-disable
5pending-enable
6invalid-config
 .1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.3.2.1.1.1.3
nwIpxEchoIfOperationalTime mandatory
Indicates the elapsed time, in hundredths of a second, that
nwIpxEchoIfAdminStatus has been in its current state.
RFC1155-SMITimeTicks
Textual Convention: RFC1155-SMITimeTicks Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.3.2.1.1.1.4

nwIpxEchoIfCtrTable

table mandatory
.1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.3.2.2.1 · 1 row entry · 12 columns
Open in standard view 
This table contains the IPX Echo packet and byte counters for each
router port on this device.
nwIpxEchoIfCtrEntry entry .1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.3.2.2.1.1
This is the primary index into the Echo Interface Counter Table. This
number corresponds to the index into the MIB 2 Interface Table which
describes the router port for which the entry exists.
Indexes
nwIpxEchoIfCtrIfIndex
Column Syntax OID
nwIpxEchoIfCtrIfIndex mandatory
This is the primary index into the IPX Echo Interface Counter Table.
This number corresponds to the index into the MIB 2 Interfcace Table
which describes the router port for which the entry exists.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.3.2.2.1.1.1
nwIpxEchoIfCtrAdminStatus mandatory
Sets the administrative state of the IPX Echo packet and byte counters
on the IPX router port for which the entry exists. Enabled (3) causes
these counters to become active on the router port configured for IPX
Echo. Di…
Enumerationr/w
Enumerated Values:
1other
2disabled
3enabled
 .1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.3.2.2.1.1.2
nwIpxEchoIfCtrReset mandatory
Resets the IPX Echo packet andbyte counters on the router port for which
the entryexists. Reset (2) resets the interface-specific counters to 0.
nwIpxEchoIfCtrOperationalTime is also reset to 0.
Enumerationr/w
Enumerated Values:
1other
2reset
 .1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.3.2.2.1.1.3
nwIpxEchoIfCtrOperationalTime mandatory
Indicates the amount of time, in hundredths of a second, that the
interface-specific IPX Echo packet and byte counters have been in the
current administrative state on the router port for which the entry
exists.
RFC1155-SMITimeTicks
Textual Convention: RFC1155-SMITimeTicks Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.3.2.2.1.1.4
nwIpxEchoIfCtrInPkts mandatory
Indicates the total number of IPX Echo packets that have been recieved,
on the router port for which the entry exists, during
nwIpxEchoIfCtrOperationalTime.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.3.2.2.1.1.5
nwIpxEchoIfCtrOutPkts mandatory
Indicates the total number of IPX Echo packets that have been
transmitted, on the router port for which the entry exists, during
nwIpxEchoIfCrOperationalTIme.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.3.2.2.1.1.6
nwIpxEchoIfCtrFilteredPkts mandatory
Indicates the total number of IPX Echo packets that have been
administratively filtered, on the router port for which the entry
exists, during nwIpxEchoIfCtrOperationalTime.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.3.2.2.1.1.7
nwIpxEchoIfCtrDiscardPkts mandatory
Indicates the total number of IPX Echo packets that have been discaded,
on the router port for which the entry exists, during
nwIpxEchoIfCtrOperationalTime.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.3.2.2.1.1.8
nwIpxEchoIfCtrInBytes mandatory
Indicates the total number of bytes in the IPX Echo packets that have
been recieved, on the router port for which the entry exists, during
nwIpxEchoIfCtrOpeationalTime.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.3.2.2.1.1.9
nwIpxEchoIfCtrOutBytes mandatory
Indicates the total number of bytes in the IPX Echo packets that have
been transmitted, on the router port for which the entry exists, during
nwIpxEchoIfCtrOperationalTime.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.3.2.2.1.1.10
nwIpxEchoIfCtrFilteredBytes mandatory
Indicates the total number of bytes in the IPX Echo packets that have
been administratively filtered and recieved on the router port for which
the entry exists, during nwIpxEchoIfCtrOperationalTime.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.3.2.2.1.1.11
nwIpxEchoIfCtrDiscardBytes mandatory
Indicates the total number of bytes in the IPX Echo packets that have
been discarded, that were recieved on the router port for which the
entry exists, during nwIpxEchoIfCtrOperationalTime.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.3.2.2.1.1.12

nwIpxEventFilterTable

table mandatory
.1.3.6.1.4.1.52.4.2.2.2.3.2.2.10.2.1 · 1 row entry · 6 columns
Open in standard view 
This table contains an entry for each event filter configured for
IPX Routing Services events.
nwIpxEventFilterEntry entry .1.3.6.1.4.1.52.4.2.2.2.3.2.2.10.2.1.1
Each entry describes an event filter which defines a particular type
of event to be logged to the event log. The nwIpxEventProtocol
refers to the instance used in the nwRtgProtocolTable and
nwComponentTable specified by…
Indexes
nwIpxEventFltrProtocol nwIpxEventFltrIfNum
Column Syntax OID
nwIpxEventFltrProtocol mandatory
Specifies the routing protocol involved in the event for which the
event filter exists.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.2.2.2.3.2.2.10.2.1.1.1
nwIpxEventFltrIfNum mandatory
Specifies the router port involved in the event for which the event
filter exists.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.2.2.2.3.2.2.10.2.1.1.2
nwIpxEventFltrControl mandatory
Set this value to 3 to add the event filter to the Event Filter
Table. Set this value to 2 to delete the event filter from the Event
Filter Table.
Enumerationr/w
Enumerated Values:
1other
2delete
3add
 .1.3.6.1.4.1.52.4.2.2.2.3.2.2.10.2.1.1.3
nwIpxEventFltrType mandatory
This 6 bit mask specifies the types of events to be logged. By
default all 6 bits are set to 1, indicating that all types of events
will be logged. Setting any bit to 0 removes an event type from this
field and prevents…
Enumerationr/w
Enumerated Values:
1misc
2timer
4rcv
8xmit
16event
32error
 .1.3.6.1.4.1.52.4.2.2.2.3.2.2.10.2.1.1.4
nwIpxEventFltrSeverity mandatory
This object controls the amount of logging by ignoring events of
lower priority than specified by this filter value. The highest
value will ignore all events except those of the highest severity.
`Highmed' will log all …
Enumerationr/w
Enumerated Values:
1highest
2highmed
3highlow
 .1.3.6.1.4.1.52.4.2.2.2.3.2.2.10.2.1.1.5
nwIpxEventFltrAction mandatory
This field specifies how the events are to be logged. Logging to the
`log' stores the events in the event log table. Logging to `trap' sends
events out through the trap mechanism.
Enumerationr/w
Enumerated Values:
1log
2trap
3log-trap
 .1.3.6.1.4.1.52.4.2.2.2.3.2.2.10.2.1.1.6

nwIpxEventTable

table mandatory
.1.3.6.1.4.1.52.4.2.2.2.3.2.2.10.3.1 · 1 row entry · 7 columns
Open in standard view 
This table contains an entry for each event that has been logged.
nwIpxEventEntry entry .1.3.6.1.4.1.52.4.2.2.2.3.2.2.10.3.1.1
Each entry contains the information about an event that has been
logged to the event table.
Indexes
nwIpxEventNumber
Column Syntax OID
nwIpxEventNumber mandatory
An ordinal value assigned to the event for which the entry exists.
nwIpxEventNumber is assigned so that each event in the event log can
be uniquely identified by the value of nwIpxEventNumber.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.2.2.2.3.2.2.10.3.1.1.1
nwIpxEventTime mandatory
Indicates the time at which the event was logged to the event log.
RFC1155-SMITimeTicks
Textual Convention: RFC1155-SMITimeTicks Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52.4.2.2.2.3.2.2.10.3.1.1.2
nwIpxEventType mandatory
Indicates the type of event that was logged.
Enumeration
Enumerated Values:
1misc
2timer
4rcv
8xmit
16event
32error
 .1.3.6.1.4.1.52.4.2.2.2.3.2.2.10.3.1.1.3
nwIpxEventSeverity mandatory
Indicates the priority that was assigned to this type event.
Enumeration
Enumerated Values:
1highest
2highmed
3highlow
 .1.3.6.1.4.1.52.4.2.2.2.3.2.2.10.3.1.1.4
nwIpxEventProtocol mandatory
Indicates the routing protocol that was involved in this event.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.2.2.2.3.2.2.10.3.1.1.5
nwIpxEventIfNum mandatory
Indicates the router port that was involved in the event.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.2.2.2.3.2.2.10.3.1.1.6
nwIpxEventTextString mandatory
Contains the actual text string that was logged.
OctetString .1.3.6.1.4.1.52.4.2.2.2.3.2.2.10.3.1.1.7