nwIpxFwdIfCacheControl
CTRON-IPX-ROUTER-MIB ·
.1.3.6.1.4.1.52.4.2.2.2.3.2.2.2.2.1.1.1.11
Object
column
mandatory
r/w
Enumeration
Controls IPX Address caching on the router port for which the entry exists. When IPX Address caching is enabled, IPX Addresses used for address validation, filtering, and forwarding are stored in the cache. This cache is checked first before doing a full route table lookup, which speeds up the switching process. Enabled (3) turns on IPX Address caching. Disabled (2) turns it off.
Context
- MIB
- CTRON-IPX-ROUTER-MIB
- OID
.1.3.6.1.4.1.52.4.2.2.2.3.2.2.2.2.1.1.1.11- Type
- column
- Access
- readwrite
- Status
- mandatory
- Parent
- nwIpxFwdIfEntry
- Table
- nwIpxFwdIfTable
- Siblings
- 13
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | other |
2 | disable |
3 | enable |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| nwIpxFwdIfIndex mandatory Indicates the value of MIB 2 ifindex, which identifies the router
port for which the entry exists. | column | Integer32 | .1.3.6.1.4.1.52.4.2.2.2.3.2.2.2.2.1.1.1.1 |
| nwIpxFwdIfAclStatus mandatory Controls the operation of any Access Control List configured for IPX
traffic on the router port for which the entry exists. Enabled (3)
applies the Access Control List indicated b… | column | Enumeration | .1.3.6.1.4.1.52.4.2.2.2.3.2.2.2.2.1.1.1.10 |
| nwIpxFwdIfCacheEntries mandatory Indicates the number of entries in the IPX Address cache on the router port for which the entry exists. | column | RFC1155-SMICounter | .1.3.6.1.4.1.52.4.2.2.2.3.2.2.2.2.1.1.1.12 |
| nwIpxFwdIfCacheHits mandatory Indicates the number of times entries in the IPX Adddress cache have
been used to provide the IPX Address required to validate, filter, or
forward an IPX packet on the router port. | column | RFC1155-SMICounter | .1.3.6.1.4.1.52.4.2.2.2.3.2.2.2.2.1.1.1.13 |
| nwIpxFwdIfCacheMisses mandatory Indicates the number of times the IPX Address required to validate,
filter, or forward an IPX packet on the router port was not found in
the IPX Address cache. | column | RFC1155-SMICounter | .1.3.6.1.4.1.52.4.2.2.2.3.2.2.2.2.1.1.1.14 |
| nwIpxFwdIfAdminStatus mandatory Sets the administrative state of IPX Routing Services on the router
port for which the entry exists. Enabled (3) causes IPX Routing
Services to become active. Disabled (2) causes … | column | Enumeration | .1.3.6.1.4.1.52.4.2.2.2.3.2.2.2.2.1.1.1.2 |
| nwIpxFwdIfOperStatus mandatory Indicates the current operating condition of IPX Routing Services on
the router port for which the entry exists. The value of
nwIpxFwdIfOperStatus indicates any problem with the c… | column | Enumeration | .1.3.6.1.4.1.52.4.2.2.2.3.2.2.2.2.1.1.1.3 |
| nwIpxFwdIfOperationalTime mandatory Indicates the elapsed time, in hundredths of a second, that
nwIpxFwdIfOperStatus has been in its current state. | column | RFC1155-SMITimeTicks | .1.3.6.1.4.1.52.4.2.2.2.3.2.2.2.2.1.1.1.4 |
| nwIpxFwdIfControl mandatory This object does not apply to this protocol. It is a common object
inherited from the MIB framework used to provide a common management
interface to all the Cabletron Routing Serv… | column | Enumeration | .1.3.6.1.4.1.52.4.2.2.2.3.2.2.2.2.1.1.1.5 |
| nwIpxFwdIfMtu mandatory Specifies the Maximum Transmission Unit (MTU) for IPX packets on the
router port for which the entry exists. This includes the IPX header
and data but does not include framing. | column | Integer32 | .1.3.6.1.4.1.52.4.2.2.2.3.2.2.2.2.1.1.1.6 |
| nwIpxFwdIfForwarding mandatory Controls forwarding of IPX packets on the router port for which the
entry exists. Enabled (3) causes IPX packets to be forwarded. Disabled
(2) prevents IPX packets from being forw… | column | Enumeration | .1.3.6.1.4.1.52.4.2.2.2.3.2.2.2.2.1.1.1.7 |
| nwIpxFwdIfFrameType mandatory Specifies the framing type for IPX packets forwarded on the router
port for which the entry exists. Some frame types are valid for
specific media types. The comments reflect tho… | column | Enumeration | .1.3.6.1.4.1.52.4.2.2.2.3.2.2.2.2.1.1.1.8 |
| nwIpxFwdIfAclIdentifier mandatory Specifies the Access Control ID of the Access Control List in effect
for IPX packets being routed on the router port for which the entry
exists. A value of 0 indicates that no Acc… | column | Integer32 | .1.3.6.1.4.1.52.4.2.2.2.3.2.2.2.2.1.1.1.9 |