nwIpxSapIfOperStatus
CTRON-IPX-ROUTER-MIB ·
.1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.2.1.1.1.3
Object
column
mandatory
Enumeration
Indicates the current operating condition of the SAP protocol on the router port for which the entry exists. The value of nwIpxSapIfOperStatus indicates any problem with your SAP configuration on the router port. A value of 6 indicates that regardless of the value of nwIpxSapIfAdminStatus. SAP is not operating because of an invalid configuration.
Context
- MIB
- CTRON-IPX-ROUTER-MIB
- OID
.1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.2.1.1.1.3- Type
- column
- Access
- readonly
- Status
- mandatory
- Parent
- nwIpxSapIfEntry
- Table
- nwIpxSapIfTable
- Siblings
- 16
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | other |
2 | disabled |
3 | enabled |
4 | pending-disable |
5 | pending-enable |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| nwIpxSapIfIndex mandatory Indicates the value of MIB 2 ifindex, which identifies the router
port for which the entry exists. | column | Integer32 | .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.2.1.1.1.1 |
| nwIpxSapIfHelloTimer mandatory This object does not apply to this protocol. It is a common object,
inherited from the MIB framework used to provide a management
interface to all the Cabletron Routing Services p… | column | Integer32 | .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.2.1.1.1.10 |
| nwIpxSapIfSplitHorizon mandatory Controls the operation of Split Horizon on the router port for which
the entry exists. When Split Horizon is enabled, SAP keeps track of
which router port information is received … | column | Enumeration | .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.2.1.1.1.11 |
| nwIpxSapIfPoisonReverse mandatory Controls the operation of Poison Reverse on the router port for
which the entry exists. When Poison Reverse is enabled, SAP
advertises any downed server as unreachable during the … | column | Enumeration | .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.2.1.1.1.12 |
| nwIpxSapIfSnooping mandatory Controls the operation of SAP Snooping on the router port. When SAP
Snooping is enabled SAP operates in passive mode, so it receives
service information, builds and maintains a se… | column | Enumeration | .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.2.1.1.1.13 |
| nwIpxSapIfType mandatory Indicates whether the directly connected network segment does or
does not support broadcast media access. If broadcast media access is
supported, SAP advertisements are sent out, … | column | Enumeration | .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.2.1.1.1.14 |
| nwIpxSapIfXmitCost mandatory This object does not apply to this protocol. It is a common object,
inherited from the MIB framework used to provide a common management
interface to all the Cabletron Routing Ser… | column | Integer32 | .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.2.1.1.1.15 |
| nwIpxSapIfAclIdentifier mandatory Specifies the Access Control List ID of the access control list in
effect for SAP protocol packets on the router port for which the entry
exists. A value of 0 indicates that there… | column | Integer32 | .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.2.1.1.1.16 |
| nwIpxSapIfAclStatus mandatory Controls the operation of the access control list identified by
nwIpxSapIfAclIdentifier. Enabled (3) causes the access control list
to be applied to all SAP protocol packet traffi… | column | Enumeration | .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.2.1.1.1.17 |
| nwIpxSapIfAdminStatus mandatory Sets the administrative state of the SAP protocol on the router port
for which the entry exists. Enabled (3) causes SAP to become active
on the router port. Disabled (2) causes SA… | column | Enumeration | .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.2.1.1.1.2 |
| nwIpxSapIfOperationalTime mandatory Indicates the elapsed time, in hundredths of a second, that
nwIpxSapIfOperStatus has been in its current state. | column | RFC1155-SMITimeTicks | .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.2.1.1.1.4 |
| nwIpxSapIfVersion mandatory Indicates the revision level of the SAP protocol in textual format. | column | Integer32 | .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.2.1.1.1.5 |
| nwIpxSapIfAdvertisement mandatory Sets the interval, in seconds, at which SAP advertises its server
table on the router port for which the entry exists. Change this value
to cause SAP to advertise its server table… | column | Integer32 | .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.2.1.1.1.6 |
| nwIpxSapIfFloodDelay mandatory Specifies the length of time, in seconds, that the SAP protocol will
wait after discovering that a directly connected route has gone down,
before flooding updates (triggered updat… | column | Integer32 | .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.2.1.1.1.7 |
| nwIpxSapIfRequestDelay mandatory Specifies the length of time, in seconds, that the SAP protocol will
wait after receiving a server request packet, before sending a
response on the router port for which the entry… | column | Integer32 | .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.2.1.1.1.8 |
| nwIpxSapIfPriority mandatory This object does not apply to this protocol. It is a common object,
inherited from the MIB framework used to provide a management
interface to all the Cabletron Routing Services … | column | Integer32 | .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.2.1.1.1.9 |