CTRON-IP-ROUTER-MIB Table View

Table-centric layout grouping table, row, and column objects.

Tables
19
Rows
19
Columns
180

nwIpFwdIfTable

table mandatory
.1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.2.1.1 · 1 row entry · 14 columns
This table contains an entry for each router port.
This table is indexed by nwIpFwdIfIndex, which indicates
the value of MIB 2 ifindex which identifies the router 
port for which each entry exists.
nwIpFwdIfEntry entry .1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.2.1.1.1
Each entry specifies the IP Routing Services configuration
for the router port for which the entry exists.
Indexes
nwIpFwdIfIndex
Column Syntax OID
nwIpFwdIfIndex mandatory
Indicates the value of MIB 2 ifindex, which identifies the router
port.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.2.1.1.1.1
nwIpFwdIfAdminStatus mandatory
Sets the administrative state of IP Routing Services
on the router port for which the entry exists. Enabled (3)
causes IP Routing Services to become active. Disabled (2)
causes it to become inactive.
Enumerationr/w
Enumerated Values:
1other
2disabled
3enabled
.1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.2.1.1.1.2
nwIpFwdIfOperStatus mandatory
Indicates the current operating condition of
IP Routing Services on the router port for which the
entry exists. The value of nwIpFwdIfOperStatus indicates
any problem with the configuration of IP routing Services on
the…
Enumeration
Enumerated Values:
1other
2disabled
3enabled
4pending-disable
5pending-enable
6invalid-config
.1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.2.1.1.1.3
nwIpFwdIfOperationalTime mandatory
Indicates the elapsed time, in hundredths of a second,
that nwIpFwdIfOperStatus has been in its current state.
RFC1155-SMITimeTicks
Textual Convention: RFC1155-SMITimeTicks Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.2.1.1.1.4
nwIpFwdIfControl mandatory
This object does not apply to this protocol. It is a
common object, inherited from the MIB framework used to
provide a common management interface to all the Cabletron
Routing Services protocol-specific MIBs. Setting th…
Enumerationr/w
Enumerated Values:
1other
2add
3delete
.1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.2.1.1.1.5
nwIpFwdIfMtu mandatory
Specifies the Maximum Transmission Unit (MTU) for IP packets
on the router port for which the entry exists. This includes
the IP header and data, but does not include framing.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.2.1.1.1.6
nwIpFwdIfForwarding mandatory
Controls forwarding of IP packets on the router port for
which the entry exists. Enabled (3) causes IP packets to be
forwarded. Disabled (2) prevents IP packets from being
forwarded.
Enumerationr/w
Enumerated Values:
1other
2disabled
3enabled
.1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.2.1.1.1.7
nwIpFwdIfFrameType mandatory
Specifies the framing type for IP packets forwarded on
the router port for which the entry exists.
Enumerationr/w
Enumerated Values:
1other
2ethernet
3snap
5slip
7localtalk
8nativewan
9encapenet
11encapenetsnap
14encaptrsnap
16encapfddisnap
17canonical
.1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.2.1.1.1.8
nwIpFwdIfAclIdentifier mandatory
Specifies the Access Control ID of the access control
list in effect for the IP packets being routed on the router port
for which the entry exists. A value of 0 indicates that no
access control list is in effect.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.2.1.1.1.9
nwIpFwdIfAclStatus mandatory
Controls the operation of any access control list configured
for IP traffic for the IP packets being routed on the router port
for which the entry exists. Enabled (3) applies the access control
list, indicated by nwIpFw…
Enumerationr/w
Enumerated Values:
1other
2disabled
3enabled
.1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.2.1.1.1.10
nwIpFwdIfCacheControl mandatory
Controls IP Address caching on the router port for which
the entry exists. IP Address caching speeds-up the switching
process. When IP Addresses caching is enabled, IP Addresses
used for address validation, filtering, a…
Enumerationr/w
Enumerated Values:
1other
2disable
3enable
.1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.2.1.1.1.11
nwIpFwdIfCacheEntries mandatory
Indicates the number of entries in the IP Address
cache on the router port for which the entry exists.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.2.1.1.1.12
nwIpFwdIfCacheHits mandatory
Indicates the number of times entries in the IP
Address Cache have been used to provide the IP Address
required to validate, filter, or forward an IP packet
on the router port.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.2.1.1.1.13
nwIpFwdIfCacheMisses mandatory
Indicates the number of times the IP Address required to
validate, filter, or forward an IP packet on the router
port was not found in the IP Address cache.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.2.1.1.1.14

nwIpAddressTable

table mandatory
.1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.2.1.2 · 1 row entry · 6 columns
This table contains an entry for each IP Address 
assigned to each router port.
nwIpAddrEntry entry .1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.2.1.2.1
Each entry specifies the IP addressing information for
the logical IP network for which the entry exists.
Indexes
nwIpAddrIfIndex nwIpAddrIfAddress
Column Syntax OID
nwIpAddrIfIndex mandatory
Indicates the value of MIB 2 ifindex, which identifies the router
port for which the entry exists.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.2.1.2.1.1
nwIpAddrIfAddress mandatory
This is the IP Address assigned to the logical IP
network for which the entry exist. As multiple IP Addresses
may be assigned to a single router port, all addresses
assigned to the port must be of the same subnet.
RFC1155-SMIIpAddressr/w
Textual Convention: RFC1155-SMIIpAddress OctetString
Type Constraints:
range: 4
.1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.2.1.2.1.2
nwIpAddrIfControl mandatory
Set this object to add or delete this entry from the table.
Enumerationr/w
Enumerated Values:
1other
2add
3delete
.1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.2.1.2.1.3
nwIpAddrIfAddrType mandatory
Specifies whether the IP address, nwIpAddrIfAddress, is
the primary, workgroup or secondary IP address for the IP router
port for which the entry exists. A primary or workgroup address
must be specified before a router …
Enumerationr/w
Enumerated Values:
1other
2primary
3secondary
4workgroup
.1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.2.1.2.1.4
nwIpAddrIfMask mandatory
Specifies the Subnet Mask for the logical IP network for
which the entry exists.
RFC1155-SMIIpAddressr/w
Textual Convention: RFC1155-SMIIpAddress OctetString
Type Constraints:
range: 4
.1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.2.1.2.1.5
nwIpAddrIfBcastAddr mandatory
Specifies the IP broadcast address type for the logical
IP network for which the entry exists. A router port may
be configured to send IP broadcasts using the all-ones-based
format or the all-zeros-based format. nwIpAdd…
Enumerationr/w
Enumerated Values:
1other
2zeros
3ones
.1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.2.1.2.1.6

nwIpFwdIfCtrTable

table mandatory
.1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.2.2.1 · 1 row entry · 23 columns
This table contains an entry for each router port configured
and enabled for IP Routing Services.
nwIpFwdIfCtrEntry entry .1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.2.2.1.1
Each entry indicates the packet and byte count of IP
packets on the router port for which the entry exists.
Indexes
nwIpFwdIfCtrIfIndex
Column Syntax OID
nwIpFwdIfCtrIfIndex mandatory
Indicates the value of MIB 2 ifindex, which identifies the
router port for which the entry exists.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.2.2.1.1.1
nwIpFwdIfCtrAdminStatus mandatory
Sets the administrative state of the per-port IP packet
and byte counters on the router port for which the entry
exists. Enabled (3) causes these counters to become active.
Disabled (2) causes these counters to become i…
Enumerationr/w
Enumerated Values:
1other
2disabled
3enabled
.1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.2.2.1.1.2
nwIpFwdIfCtrReset mandatory
Resets the per-port IP packet and byte counters on the
router port for which the entry exists. Reset (2) resets the
counters to 0. nwIpFwdIfCtrOperationalTime is also reset to 0.
Enumerationr/w
Enumerated Values:
1other
2reset
.1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.2.2.1.1.3
nwIpFwdIfCtrOperationalTime mandatory
Indicates the elapsed time, in hundredths of a second, that
the per-port IP packet and byte counters have been active on
the router port for which the entry exists.
RFC1155-SMITimeTicks
Textual Convention: RFC1155-SMITimeTicks Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.2.2.1.1.4
nwIpFwdIfCtrInPkts mandatory
Indicates the total number of IP packets that have been
received, during nwIpFwdIfCtrOperationaltime, on the router
port for which the entry exists.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.2.2.1.1.5
nwIpFwdIfCtrOutPkts mandatory
Indicates the total number of IP packets that have
been transmitted, during nwIpFwdIfCtrOperationalTime,
on the router port for which the entry exists.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.2.2.1.1.6
nwIpFwdIfCtrFwdPkts mandatory
Indicates the total number of IP packets that have been
forwarded during nwIpFwdIfCtrOperationalTime, on the router
port for which the entry exists.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.2.2.1.1.7
nwIpFwdIfCtrFilteredPkts mandatory
Indicates the total number of IP packets that have been
administratively filtered, during
nwIpFwdIfCtrOperationalTime, on the IP router port for
which this entry exists.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.2.2.1.1.8
nwIpFwdIfCtrDiscardPkts mandatory
Indicates the total number of IP packets that have
been discarded (dropped), during nwIpFwdIfCtrOperationalTime,
on the router port for which the entry exists.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.2.2.1.1.9
nwIpFwdIfCtrAddrErrPkts mandatory
Indicates the total number of IP packets that have been
discarded, because of addressing errors in the IP header,
during nwIpFwdIfCtrOperationalTime, on the router port for
which the entry exists.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.2.2.1.1.10
nwIpFwdIfCtrLenErrPkts mandatory
Indicates the total number of IP packets that have been discarded,
because an invalid packet length was contained in the IP header, during
nwIpFwdIfCtrOperationalTime, on the router port for which the entry exists.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.2.2.1.1.11
nwIpFwdIfCtrHdrErrPkts mandatory
Indicates the total number of IP packets that have been discarded,
because of an invalid IP header, during nwIpFwdIfCtrOperationalTime,
on the router port for which the entry exists.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.2.2.1.1.12
nwIpFwdIfCtrInBytes mandatory
Indicates the total number of bytes in the IP packets that have been
received, during nwIpFwdIfCtrOperationalTime, on the router port for
which the entry exists.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.2.2.1.1.13
nwIpFwdIfCtrOutBytes mandatory
Indicates the total number of bytes in the IP packets that have
been transmitted, during nwIpFwdIfCtrOperationalTime, on the router
port for which the entry exists.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.2.2.1.1.14
nwIpFwdIfCtrFwdBytes mandatory
Indicates the total number of bytes in the IP packets
that have been forwarded, on the router port for which the
entry exists, during nwIpFwdIfCtrOperationalTime.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.2.2.1.1.15
nwIpFwdIfCtrFilteredBytes mandatory
Indicates the total number of bytes in the IP packets
that have been administratively filtered, during
nwIpFwdIfCtrOperationalTime, on the IP router port for
which the entry exists.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.2.2.1.1.16
nwIpFwdIfCtrDiscardBytes mandatory
Indicates the total number of bytes in the IP packets that
have been discarded, during nwIpFwdIfCtrOperationalTime, on
the router port for which the entry exists.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.2.2.1.1.17
nwIpFwdIfCtrHostInPkts mandatory
Indicates the total number of IP packets that have been
successfully delivered to the local host, that were received
on the router port for which the entry exists, during
nwIpFwdIfCtrOperationalTime.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.2.2.1.1.18
nwIpFwdIfCtrHostOutPkts mandatory
Indicates the total number of IP packets that have been
transmitted by the local host, during
nwIpFwdIfCtrOperationalTime, on the router port for which the
entry exists.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.2.2.1.1.19
nwIpFwdIfCtrHostDiscardPkts mandatory
Indicates the total number of IP packets discarded by the
local host due to a lack of host resources, that were
received on the router port for which the entry exists,
during nwIpFwdIfCtrOperationalTime.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.2.2.1.1.20
nwIpFwdIfCtrHostInBytes mandatory
Indicates the total number of bytes in the IP packets that
have been successfully delivered to the local host, that
were received on the router port for which the entry exists,
during nwIpFwdIfCtrOperationalTime.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.2.2.1.1.21
nwIpFwdIfCtrHostOutBytes mandatory
Indicates the total number of bytes in the IP packets that
have been transmitted by the local host, during
nwIpFwdIfCtrOperationalTime, on the router port for which
the entry exists.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.2.2.1.1.22
nwIpFwdIfCtrHostDiscardBytes mandatory
Indicates the total number of bytes in the IP packets
that have been discarded by the local host due to a lack
of host resources, that were received on the router port
for which the entry exists, during
nwIpFwdIfCtrOper…
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.2.2.1.1.23

nwIpRipIfTable

table mandatory
.1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.2.1.1 · 1 row entry · 17 columns
This table contains an entry for each router port. Each
entry can contain different values, allowing the routing
protocol configuration to vary from router port to router
port. This table is indexed by nwIpRipIfIndex, which 
indicates the value of MIB 2 ifindex, which identifies the
router port for which the entry exists.
nwIpRipIfEntry entry .1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.2.1.1.1
Each entry contains the RIP routing protocol configuration
for the router port for which the entry exists.
Indexes
nwIpRipIfIndex
Column Syntax OID
nwIpRipIfIndex mandatory
Indicates the value of MIB 2 ifindex, which identifies
the router port for which the entry exists.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.2.1.1.1.1
nwIpRipIfAdminStatus mandatory
Sets the administrative state of the RIP routing protocol
on the router port for which the entry exists. Enabled (3)
causes RIP to become active on the router port. Disabled (2)
causes RIP to become inactive on the rout…
Enumerationr/w
Enumerated Values:
1other
2disabled
3enabled
.1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.2.1.1.1.2
nwIpRipIfOperStatus mandatory
Indicates the current operating condition of the RIP
routing protocol on the router port for which the entry
exists. The value of nwIpRipIfOperStatus indicates any problem
with your RIP configuration on the router port.…
Enumeration
Enumerated Values:
1other
2disabled
3enabled
4pending-disable
5pending-enable
.1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.2.1.1.1.3
nwIpRipIfOperationalTime mandatory
Indicates the elapsed time, in hundredths of a second,
nwIpRipIfOperStatus, has been in its current state.
RFC1155-SMITimeTicks
Textual Convention: RFC1155-SMITimeTicks Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.2.1.1.1.4
nwIpRipIfVersion mandatory
Indicates the revision level of the RIP routing protocol
firmware on the router port for which the entry exists, in
textual format.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.2.1.1.1.5
nwIpRipIfAdvertisement mandatory
Sets the interval, in seconds, at which RIP advertises
the RIP route table on the router port for which the entry
exists.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.2.1.1.1.6
nwIpRipIfFloodDelay mandatory
Sets the length of time, in seconds, that the RIP routing
protocol should wait after discovering that a directly
connected route has gone down, before flooding updates
(triggered updates) on the router port for which th…
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.2.1.1.1.7
nwIpRipIfRequestDelay mandatory
Sets the length of time, in hundredths of a second, that
the RIP routing protocol should wait after receiving a
route request packet, before sending a response on the
router port for which the entry exists. A value of…
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.2.1.1.1.8
nwIpRipIfPriority mandatory
This object does not apply to this protocol. It is a common
object, inherited from the MIB framework used to provide a
common management interface to all the Cabletron Routing
Services protocol-specific MIBs. Setting th…
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.2.1.1.1.9
nwIpRipIfHelloTimer mandatory
This object does not apply to this protocol. It is a
common object, inherited from the MIB framework used to
provide a common management interfaced to all the Cabletron
Routing Services protocol-specific MIBs. Se…
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.2.1.1.1.10
nwIpRipIfSplitHorizon mandatory
Sets the operating condition of Split Horizon on the
router port for which the entry exists. When Split Horizon
is enabled, the RIP routing protocol keeps track of which
router port route information is received on, and…
Enumerationr/w
Enumerated Values:
1other
2disabled
3enabled
.1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.2.1.1.1.11
nwIpRipIfPoisonReverse mandatory
Sets the operating condition of Poison Reverse on the
router port for which the entry exists. When Poison Reverse
is enabled, the RIP routing protocol advertises any downed
route as unreachable during the period of tim…
Enumerationr/w
Enumerated Values:
1other
2disabled
3enabled
.1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.2.1.1.1.12
nwIpRipIfSnooping mandatory
Controls the operation of RIP Snooping on the router
port. When RIP Snooping is enabled the RIP routing protocol
operates in passive mode so that it receives route information,
builds and maintains a route table, but do…
Enumerationr/w
Enumerated Values:
1other
2disabled
3enabled
.1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.2.1.1.1.13
nwIpRipIfType mandatory
Indicates whether the directly connected network segment
does or does not support broadcast media access. If broadcast
media access is supported, RIP advertisements are sent out one
broadcast packet per router port. If …
Enumeration
Enumerated Values:
1other
2bma
3nbma
.1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.2.1.1.1.14
nwIpRipIfXmitCost mandatory
This object does not apply to this protocol. It is a
common object, inherited from the MIB framework used to
provide a common management interface to all the Cabletron
Routing Services protocol-specific MIBs. Setting t…
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.2.1.1.1.15
nwIpRipIfAclIdentifier mandatory
Specifies the Access Control ID of the access control
list in effect for RIP routing protocol packets on the
router port for which the entry exists. A value of 0
indicates that there is no access control list in effect…
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.2.1.1.1.16
nwIpRipIfAclStatus mandatory
Controls the operation of the access control list
identified by nwIpRipIfAclIdentifier. Enabled (3) applies
the access control list to all RIP routing protocol packet
traffic on the router port for which the entry exis…
Enumerationr/w
Enumerated Values:
1other
2disabled
3enabled
.1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.2.1.1.1.17

nwIpRipIfCtrTable

table mandatory
.1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.2.2.1 · 1 row entry · 12 columns
This table contains an entry for each router port.This table
is indexed by nwIpRipIfCtrIfIndex which indicates the value
of MIB 2 ifindex, which identifies the router port for which
the entry exists.
nwIpRipIfCtrEntry entry .1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.2.2.1.1
Each entry indicates the current packet and byte count of
RIP routing protocol packets on the router port for which
the entry exists.
Indexes
nwIpRipIfCtrIfIndex
Column Syntax OID
nwIpRipIfCtrIfIndex mandatory
Indicates the value of MIB 2 ifindex, which identifies
the router port for which the entry exists.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.2.2.1.1.1
nwIpRipIfCtrAdminStatus mandatory
Sets the administrative state of the RIP packet and byte
counters on the router port for which this entry exists.
Enabled (3) causes these counters to become active.
Disabled (2) causes these counters to become inactiv…
Enumerationr/w
Enumerated Values:
1other
2disabled
3enabled
.1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.2.2.1.1.2
nwIpRipIfCtrReset mandatory
Resets the per-port RIP packet and byte counters on the
router port for which this entry exists. Reset (2) resets
the counters to 0. nwIpRipIfCtrOperationalTime is also reset
to 0.
Enumerationr/w
Enumerated Values:
1other
2reset
.1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.2.2.1.1.3
nwIpRipIfCtrOperationalTime mandatory
Indicates the elapsed time, in hundredths of a second,
that nwIpRipIfCtrAdminStatus has been in the current
state.
RFC1155-SMITimeTicks
Textual Convention: RFC1155-SMITimeTicks Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.2.2.1.1.4
nwIpRipIfCtrInPkts mandatory
Indicates the total number of RIP routing protocol packets
that have been received, during nwIpRipIfCtrOperationalTime,
on the router port for which the entry exists.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.2.2.1.1.5
nwIpRipIfCtrOutPkts mandatory
Indicates the total number of RIP packets that have been
transmitted, during nwIpRipIfCtrOperationalTime, on the router
port for which the entry exists.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.2.2.1.1.6
nwIpRipIfCtrFilteredPkts mandatory
Indicates the total number of RIP packets that have been
administratively filtered during nwIpRipIfCtrOperationalTime,
on the router port for which the entry exists.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.2.2.1.1.7
nwIpRipIfCtrDiscardPkts mandatory
Indicates the total number of RIP routing protocol packets
that have been discarded, during nwIpRipIfCtrOperationalTime.
that were received through the router port for which the entry
exists.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.2.2.1.1.8
nwIpRipIfCtrInBytes mandatory
Indicates the total number of bytes in the RIP routing
protocol packets that have been received, during
nwIpRipIfCtrOperationalTime, on the router port for which this
entry exists.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.2.2.1.1.9
nwIpRipIfCtrOutBytes mandatory
Indicates the total number of bytes in the RIP routing
protocol packets that have been transmitted, during
nwIpRipIfCtrOperationalTime, on the router port for which
the entry exists.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.2.2.1.1.10
nwIpRipIfCtrFilteredBytes mandatory
Indicates the total number of bytes in the RIP routing
protocol packets that have been administratively filtered,
during nwIpRipIfCtrOperationalTime, on the router port for
which the entry exists.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.2.2.1.1.11
nwIpRipIfCtrDiscardBytes mandatory
Indicates the total number of bytes in the RIP routing
protocol packets that have been discarded during
nwIpRipIfCtrOperationalTime, that were received on the
router port for which the entry exists.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.2.2.1.1.12

nwIpRipRouteTable

table mandatory
.1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.3.1 · 1 row entry · 8 columns
This table contains the RIP route table. This table contains
an entry for each route learned through the RIP routing
protocol. Only the best routes from this table are added to
the IP forwarding table to be used for packet switching.
nwIpRipRouteEntry entry .1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.3.1.1
Each entry describes the RIP route to the destination
network for which the entry exists.
Indexes
nwIpRipRtNetId nwIpRipRtIfIndex nwIpRipRtSrcNode
Column Syntax OID
nwIpRipRtNetId mandatory
This is the primary index into the RIP route table. This
number indicates the IP Address of the destination for which
the entry exists.
RFC1155-SMIIpAddress
Textual Convention: RFC1155-SMIIpAddress OctetString
Type Constraints:
range: 4
.1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.3.1.1.1
nwIpRipRtIfIndex mandatory
This is a secondary index into IP-RIP route table. This
number corresponds to the value of MIB 2 ifindex, which
identifies the router port for which the entry exists.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.3.1.1.2
nwIpRipRtSrcNode mandatory
This is a secondary index into the RIP route table. This
number indicates the IP Address of the source router from
which this route was learned. A value of 0.0.0.0 indicates
that the source is on the network segment dir…
RFC1155-SMIIpAddress
Textual Convention: RFC1155-SMIIpAddress OctetString
Type Constraints:
range: 4
.1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.3.1.1.3
nwIpRipRtMask mandatory
Indicates the Subnet Mask of the IP Address for
which the entry exists.
RFC1155-SMIIpAddress
Textual Convention: RFC1155-SMIIpAddress OctetString
Type Constraints:
range: 4
.1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.3.1.1.4
nwIpRipRtHops mandatory
Indicates the number of hops required to reach the
destination for which the entry exists.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.3.1.1.5
nwIpRipRtAge mandatory
Indicates the amount of time, in seconds, since an update
has been received for the route for which the entry exists.
RFC1155-SMITimeTicks
Textual Convention: RFC1155-SMITimeTicks Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.3.1.1.6
nwIpRipRtType mandatory
Indicates whether the destination network is directly
connected through the router port specified by
nwIpRipRtIfIndex, or is indirectly connected through
another router, specified by nwIpRipRtSrcNode.
Enumeration
Enumerated Values:
1other
2invalid
3direct
4remote
5static
6ospf
.1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.3.1.1.7
nwIpRipRtFlags mandatory
Specifies properties of the RIP route. The bit mask is
as follows: source-changed (1), best-source (2), local net (4),
net-down (8), update-fib-only (16).
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.3.1.1.8

nwIpOspfIfTable

table mandatory
.1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.2.1.2.1.1 · 1 row entry · 9 columns
This table contains the OSPF configuration information for
each IP router port
nwIpOspfIfEntry entry .1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.2.1.2.1.1.1
Each entry specifies the OSPF configuration information
for the IP router port for which the entry exists.
Indexes
nwIpOspfIfIndex
Column Syntax OID
nwIpOspfIfIndex mandatory
This is the primary index into the OSPF interface table.
This number corresponds to the index into the MIB-2
Interface Table which describes the router port for
which the entry exists.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.2.1.2.1.1.1.1
nwIpOspfIfAdminStatus mandatory
Sets the administrative state of OSPF on the IP router
port for which the entry exists. enabled(3)
causes OSPF to become active on the router port.
disabled(2) causes OSPF to become inactive on the
router port.
Enumerationr/w
Enumerated Values:
1other
2disabled
3enabled
.1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.2.1.2.1.1.1.2
nwIpOspfIfOperStatus mandatory
Sets the administrative state of OSPF on the IP
router port for which the entry exists. enabled(3)
causes OSPF to become active on the router port.
disabled(2) causes OSPF to become inactive on the
router port.
Enumeration
Enumerated Values:
1other
2disabled
3enabled
4pending-disable
5pending-enable
.1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.2.1.2.1.1.1.3
nwIpOspfIfOperationalTime mandatory
Indicates the elapsed time, in hundredths of a second,
that nwIpOspfIfAdminStatus has been in its current state.
RFC1155-SMITimeTicks
Textual Convention: RFC1155-SMITimeTicks Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.2.1.2.1.1.1.4
nwIpOspfIfVersion mandatory
Indicates the OSPF protocol revision level supported on
the router port.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.2.1.2.1.1.1.5
nwIpOspfIfSnooping mandatory
Controls the operation of OSPF Snooping on the IP
router port for which the entry exists.OSPF
Snooping is operating OSPF in passive mode, so it receives
route information, builds and maintains a route
information table,…
Enumerationr/w
Enumerated Values:
1other
2disabled
3enabled
.1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.2.1.2.1.1.1.6
nwIpOspfIfType mandatory
Specifies whether the attached network segment does or
does not support broadcast media access. bma (2) indicates
that route advertisements can be sent as broadcasts. nbma
(3) indicates that route advertisements must be…
Enumeration
Enumerated Values:
1other
2bma
3nbma
.1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.2.1.2.1.1.1.7
nwIpOspfIfAclIdentifier mandatory
Specifies the Access Control List ID of the access
control list applied to OSPF traffic on the IP router
port for which the entry exists. A value of
0 indicates that no Access List applies.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.2.1.2.1.1.1.8
nwIpOspfIfAclStatus mandatory
Controls the operation of the access list configured for
OSPF traffic on the IP router port for which the entry exists.
enabled(3) causes the access list to be applied. disabled(2)
causes the access list not to be appli…
Enumerationr/w
Enumerated Values:
1other
2disabled
3enabled
.1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.2.1.2.1.1.1.9

nwIpOspfIfCtrTable

table mandatory
.1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.2.1.2.2.1 · 1 row entry · 12 columns
This table contains the OSPF packet and byte counter for
each configured OSPF router port.
nwIpOspfIfCtrEntry entry .1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.2.1.2.2.1.1
Each entry specifies the OSPF packet and byte counter for
for the router for which the entry exists.
Indexes
nwIpOspfIfCtrIfIndex
Column Syntax OID
nwIpOspfIfCtrIfIndex mandatory
This is the primary index into the OSPF interface counter
table. This number corresponds to the index into the MIB-2
Interface Table which describes the router port for
which the entry exists.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.2.1.2.2.1.1.1
nwIpOspfIfCtrAdminStatus mandatory
Sets the administrative state of the OSPF packet and byte
counters on the IP router port for which
the entry exists. enabled(3) causes these counters to
become active on the router port. disabled(2) turns these
counters…
Enumerationr/w
Enumerated Values:
1other
2disabled
3enabled
.1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.2.1.2.2.1.1.2
nwIpOspfIfCtrReset mandatory
Resets the OSPF packet and byte counters on the router port
for which the entry exists. reset (2) resets the
interface-specific counters to 0 and
nwIpOspfIfCtrOperationalTime to 0.
Enumerationr/w
Enumerated Values:
1other
2reset
.1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.2.1.2.2.1.1.3
nwIpOspfIfCtrOperationalTime mandatory
Indicates the amount of time (# of time ticks) that the
interface-specific OSPF packet and byte counters have
been active on the router port for which the entry
exists.
RFC1155-SMITimeTicks
Textual Convention: RFC1155-SMITimeTicks Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.2.1.2.2.1.1.4
nwIpOspfIfCtrInPkts mandatory
Indicates the total number of OSPF packets that have been
received, on the router port for which the entry exists,
during nwIpOspfIfCtrOperationalTime.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.2.1.2.2.1.1.5
nwIpOspfIfCtrOutPkts mandatory
Indicates the total number of OSPF packets that have been
transmitted, on the router port for which the entry exists,
during nwIpOspfIfCtrOperationalTime.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.2.1.2.2.1.1.6
nwIpOspfIfCtrFilteredPkts mandatory
Indicates the total number of OSPF packets that have been
administratively filtered, on the router port for which
the entry exists, during nwIpOspfIfCtrOperationalTime.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.2.1.2.2.1.1.7
nwIpOspfIfCtrDiscardPkts mandatory
Indicates the total number of OSPF packets that have been
discarded, on the router port for which the entry exists,
during nwIpOspfIfCtrOperationalTime.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.2.1.2.2.1.1.8
nwIpOspfIfCtrInBytes mandatory
Indicates the total number of bytes in the OSPF packets
that have been received, on the router port for
which the entry exists, during
nwIpOspfIfCtrOperationalTime.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.2.1.2.2.1.1.9
nwIpOspfIfCtrOutBytes mandatory
Indicates the total number of bytes in the OSPF packets
that have been transmitted, on the router port for which the
entry exists, during nwIpOspfIfCtrOperationalTime.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.2.1.2.2.1.1.10
nwIpOspfIfCtrFilteredBytes mandatory
Indicates the total number of bytes in the OSPF packets
that have been administratively filtered, on the
router port for which the entry exists, during
nwIpOspfIfCtrOperationalTime
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.2.1.2.2.1.1.11
nwIpOspfIfCtrDiscardBytes mandatory
Indicates the total number of bytes in the OSPF packets
that have been discarded, on the router port for which the
entry exists, during nwIpOspfIfCtrOperationalTime.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.2.1.2.2.1.1.12

nwIpOspfStaticTable

table mandatory
.1.3.6.1.4.1.52.4.2.2.2.3.1.2.5.2.2.1 · 1 row entry · 6 columns
A table of statically configured entries in the Cabletron IP OSPF 
FIB.
nwIpOspfStaticEntry entry .1.3.6.1.4.1.52.4.2.2.2.3.1.2.5.2.2.1.1
A list of information for each static entry in the Cabletron
IP OSPF FIB.
Indexes
nwIpOspfStaticDest nwIpOspfStaticForwardMask nwIpOspfStaticNextHop
Column Syntax OID
nwIpOspfStaticDest mandatory
The network Address of a static route leaked from the IP FIB into the
Cabletron IP OSPF FIB.
RFC1155-SMIIpAddress
Textual Convention: RFC1155-SMIIpAddress OctetString
Type Constraints:
range: 4
.1.3.6.1.4.1.52.4.2.2.2.3.1.2.5.2.2.1.1.1
nwIpOspfStaticForwardMask mandatory
The network mask of a static route leaked from the IP FIB into the
Cabletron IP OSPF FIB.
RFC1155-SMIIpAddress
Textual Convention: RFC1155-SMIIpAddress OctetString
Type Constraints:
range: 4
.1.3.6.1.4.1.52.4.2.2.2.3.1.2.5.2.2.1.1.2
nwIpOspfStaticNextHop mandatory
The next hop address of a static route leaked from the IP FIB into the
Cabletron IP OSPF FIB. A value of 0.0.0.0 indicates that packets for
the external destination should be forwarded to the
advertising router.
RFC1155-SMIIpAddress
Textual Convention: RFC1155-SMIIpAddress OctetString
Type Constraints:
range: 4
.1.3.6.1.4.1.52.4.2.2.2.3.1.2.5.2.2.1.1.3
nwIpOspfStaticMetric mandatory
The Cabletron IP OSPF advertised cost of reaching the leaked static
route.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.52.4.2.2.2.3.1.2.5.2.2.1.1.4
nwIpOspfStaticMetricType mandatory
The Cabletron IP OSPF metric type to be advertised using
OSPF: Autonomous System External type 1 (1) or Autonomous System
External type 2 (2).
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.52.4.2.2.2.3.1.2.5.2.2.1.1.5
nwIpOspfStaticStatus mandatory
By setting this OID to inactive for a particular static route, the static
route will be added to the IP OSPF FIB but not advertised. Setting this
OID to active for a particular static route, the static route will be
Enumerationr/w
Enumerated Values:
1inactive
2active
3delete
.1.3.6.1.4.1.52.4.2.2.2.3.1.2.5.2.2.1.1.6

nwIpHostCtlTable

table mandatory
.1.3.6.1.4.1.52.4.2.2.2.3.1.2.6.2.1 · 1 row entry · 13 columns
This table contains the control information for maintaining
a cache of IP host addresses on each router port. Note that
the of actual entries are maintained by the IP Address
Translation Table (Net-to-Media) of MIB 2.
nwIpHostCtlEntry entry .1.3.6.1.4.1.52.4.2.2.2.3.1.2.6.2.1.1
Each entry contains the control information for
maintaining the cache on each router port.
Indexes
nwIpHostCtlIfIndex
Column Syntax OID
nwIpHostCtlIfIndex mandatory
Indicates the value of MIB 2 ifindex, which identifies
the router port for which the entry exists.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.52.4.2.2.2.3.1.2.6.2.1.1.1
nwIpHostCtlAdminStatus mandatory
This object does not apply to this protocol. It is a
common object, inherited from the MIB framework used to
provide a common management interface to all the Cabletron
Routing Services protocol specific MIBS. Setting th…
Enumerationr/w
Enumerated Values:
1other
2disable
3enable
.1.3.6.1.4.1.52.4.2.2.2.3.1.2.6.2.1.1.2
nwIpHostCtlOperStatus mandatory
Indicates the current operating condition of the
IP Host Address cache on the router port for which the
entry exists.
Enumeration
Enumerated Values:
1other
2disabled
3enabled
4pending-disable
5pending-enable
.1.3.6.1.4.1.52.4.2.2.2.3.1.2.6.2.1.1.3
nwIpHostCtlOperationalTime mandatory
Indicates the elapsed time, in hundredths of a second,
that nwIpHostCtlOperStatus has been in the current state.
RFC1155-SMITimeTicks
Textual Convention: RFC1155-SMITimeTicks Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.52.4.2.2.2.3.1.2.6.2.1.1.4
nwIpHostCtlProtocol mandatory
Controls the operation of the ARP protocol on the router
port for which the entry exists.
Enumerationr/w
Enumerated Values:
1other
2disable
3enable
.1.3.6.1.4.1.52.4.2.2.2.3.1.2.6.2.1.1.5
nwIpHostCtlSnooping mandatory
Controls ARP Snooping on the router port for which
the entry exists. Given the ARP protocol is enabled,
nwIpHostCtlProtocol=3, setting nwIpHostCtlIfSnooping to
enabled (3) turns on ARP Snooping. When ARP Snooping is
en…
Enumerationr/w
Enumerated Values:
1other
2disable
3enable
.1.3.6.1.4.1.52.4.2.2.2.3.1.2.6.2.1.1.6
nwIpHostCtlProxy mandatory
Controls the operations of Proxy ARP on the router port
for which the entry exists. Given the ARP protocol is
enabled, nwIpHostCtlProtocol=3, setting nwIpHostCtlProxy to
enabled (3) turns on Proxy ARP. When Proxy ARP i…
Enumerationr/w
Enumerated Values:
1other
2disable
3enable
.1.3.6.1.4.1.52.4.2.2.2.3.1.2.6.2.1.1.7
nwIpHostCtlCacheMax mandatory
Indicates the maximum number of entry slots the cache
can consist of. nwIpHostCtlCacheMax cannot be set to less
than 16. Setting this value does not allocate any memory for
the cache.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.52.4.2.2.2.3.1.2.6.2.1.1.8
nwIpHostCtlCacheSize mandatory
Indicates the current number of entry slots in the cache.
The cache automatically resizes to accommodate all entries
up to the maximum number of entries set by
nwIpHostCtlCacheMax.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.52.4.2.2.2.3.1.2.6.2.1.1.9
nwIpHostCtlNumStatics mandatory
Indicates the total number of static entries in the cache
on the router port for which the entry exists. Static entries
remain in the cache until they are administratively removed.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.52.4.2.2.2.3.1.2.6.2.1.1.10
nwIpHostCtlNumDynamics mandatory
Indicates the number of dynamic entries in the cache on
the router port for which the entry exists. Dynamic entries
area added and aged out by the ARP protocol.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.52.4.2.2.2.3.1.2.6.2.1.1.11
nwIpHostCtlCacheHits mandatory
Indicates the number of times an entry in the cache has
been used to successfully provide the physical address
required to forward an IP packet on the router port for
which the entry exists.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.52.4.2.2.2.3.1.2.6.2.1.1.12
nwIpHostCtlCacheMisses mandatory
Indicates the number of times the physical address
required to forward an IP packet has not been found in
the cache on the router port for which the entry exists.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.52.4.2.2.2.3.1.2.6.2.1.1.13

nwIpHostMapTable

table mandatory
.1.3.6.1.4.1.52.4.2.2.2.3.1.2.6.3.1 · 1 row entry · 7 columns
The Ip Address translation table used for mapping an IP
address to physical address, framing, port and circuit
identifier, if applicable.
nwIpHostMapEntry entry .1.3.6.1.4.1.52.4.2.2.2.3.1.2.6.3.1.1
Each entry contains one IpAddress to 'physical'
address equivalence, including a circuit identifier
if applicable. Also provided is the framing and
port number required to converse with this host.
Indexes
nwIpHostMapIfIndex nwIpHostMapIpAddr
Column Syntax OID
nwIpHostMapIfIndex mandatory
This is the primary (major) index into the HostMap
table. This number corresponds to the index into the
MIB-2 Interfaces Group which describes the IP router
port for which the entry exists.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.52.4.2.2.2.3.1.2.6.3.1.1.1
nwIpHostMapIpAddr mandatory
The IpAddress corresponding to the media-dependent
'physical' address and circuit identifier (if applic).
RFC1155-SMIIpAddress
Textual Convention: RFC1155-SMIIpAddress OctetString
Type Constraints:
range: 4
.1.3.6.1.4.1.52.4.2.2.2.3.1.2.6.3.1.1.2
nwIpHostMapPhysAddr mandatory
The media-dependent 'physical' address. The value of
this object is 0 for entries indicating native-wan(8)
framing.
RFC1213-MIBPhysAddressr/w
Textual Convention: RFC1213-MIBPhysAddress OctetString
.1.3.6.1.4.1.52.4.2.2.2.3.1.2.6.3.1.1.3
nwIpHostMapType mandatory
Setting this object to the value invalid(2) has
the effect of invalidating the corresponding entry
in the nwIpHostMapTable. That is, it effectively
dissasociates the circuit identified with said
entry from the mapping …
Enumerationr/w
Enumerated Values:
1other
2invalid
3dynamic
4static
5inactive
.1.3.6.1.4.1.52.4.2.2.2.3.1.2.6.3.1.1.4
nwIpHostMapCircuitID mandatory
The identifier for the virtual circuit present on the
interface. On an interface configured for Frame Relay,
this number is the DLCI for the IP Address at the end of
the circuit. For non-WAN interfaces, the value of th…
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.52.4.2.2.2.3.1.2.6.3.1.1.5
nwIpHostMapFraming mandatory
Specifies the framing type required to converse with the
host for which this entry exists.
Enumerationr/w
Enumerated Values:
1other
2ethernet
3snap
5slip
7localtalk
8nativewan
9encapenet
11encapenetsnap
14encaptrsnap
16encapfddisnap
17canonical
.1.3.6.1.4.1.52.4.2.2.2.3.1.2.6.3.1.1.6
nwIpHostMapPortNumber mandatory
The unique value for the logical port number. It's value
ranges between 1 and a maximum value which is dependent on
both the number of interfaces in the system and the number
of circuits present on interfaces which are …
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.52.4.2.2.2.3.1.2.6.3.1.1.7

nwIpAclTable

table mandatory
.1.3.6.1.4.1.52.4.2.2.2.3.1.2.7.2 · 1 row entry · 10 columns
This table contains the access control list information
for IP traffic. This table contains entries, each of which
allows packet forwarding between source/destination pairs to
be permitted or denied. The list is identified by the Access
Control List ID. Each list may contain multiple entries 
ordered by sequence number. When an access control list is
searched, it is searched in sequence number order and the 
first match found ends the search. If no match is found, 
access defaults to permitted.
nwIpAclEntry entry .1.3.6.1.4.1.52.4.2.2.2.3.1.2.7.2.1
Each entry contains IP source/destination access information.
Indexes
nwIpAclIdentifier nwIpAclSequence
Column Syntax OID
nwIpAclIdentifier mandatory
This is the primary (major) index into the IP access
control list table. This value identifies the access control
list by a unique identifier arbitrarily assigned by the user.
All entries that have the same value for nw…
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.52.4.2.2.2.3.1.2.7.2.1.1
nwIpAclSequence mandatory
This is the secondary (minor) index into the IP access
control list table. This number corresponds to a sequence
number used to order multiple entries within the same access
control list.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.52.4.2.2.2.3.1.2.7.2.1.2
nwIpAclPermission mandatory
Specifies whether access is allowed or denied between
the source and destination address pair. Note that source
and destination are interchangeable when bi-directional
control is selected. To remove an existing entry se…
Enumerationr/w
Enumerated Values:
1other
2invalid
3permit
4deny
5permit-bidirectional
6deny-bidirectional
.1.3.6.1.4.1.52.4.2.2.2.3.1.2.7.2.1.3
nwIpAclMatches mandatory
Indicates the number of matches on this entry that have
resulted in the permit/deny access restriction being
applied as part of the forwarding process.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.52.4.2.2.2.3.1.2.7.2.1.4
nwIpAclDestAddress mandatory
Specifies the destination IP address used to compare
for matches on the access control list.
RFC1155-SMIIpAddressr/w
Textual Convention: RFC1155-SMIIpAddress OctetString
Type Constraints:
range: 4
.1.3.6.1.4.1.52.4.2.2.2.3.1.2.7.2.1.5
nwIpAclDestMask mandatory
Specifies the mask to be applied to the destination address
to determine the portion of the address used to compare for
matches on the access control list. Only bits that are
matching are used in the comparison. This a…
RFC1155-SMIIpAddressr/w
Textual Convention: RFC1155-SMIIpAddress OctetString
Type Constraints:
range: 4
.1.3.6.1.4.1.52.4.2.2.2.3.1.2.7.2.1.6
nwIpAclSrcAddress mandatory
Specifies the source address used to compare for
matches on the access control list.
RFC1155-SMIIpAddressr/w
Textual Convention: RFC1155-SMIIpAddress OctetString
Type Constraints:
range: 4
.1.3.6.1.4.1.52.4.2.2.2.3.1.2.7.2.1.7
nwIpAclSrcMask mandatory
Specifies the mask to be applied to the source address
to determine the portion of the address to be used to compare
for matches on the access control list. Only bits that are
matching are used in the comparison. This a…
RFC1155-SMIIpAddressr/w
Textual Convention: RFC1155-SMIIpAddress OctetString
Type Constraints:
range: 4
.1.3.6.1.4.1.52.4.2.2.2.3.1.2.7.2.1.8
nwIpAclProtocol mandatory
Specifies the IP protocols checked to compare for matches
on the access control list.
Enumerationr/w
Enumerated Values:
1other
2all
3icmp
4udp
5tcp
.1.3.6.1.4.1.52.4.2.2.2.3.1.2.7.2.1.9
nwIpAclPortNumber mandatory
Specifies the port number used to compare for matches on
the access control list. nwIpAclPortNumber only applies
if nwIpAclProtocol is equal to 4 or 5, UDP or TCP
nwIpAclPortNumber ranges from 0 to 65536. The value 0 i…
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.52.4.2.2.2.3.1.2.7.2.1.10

nwIpRedirectTable

table mandatory
.1.3.6.1.4.1.52.4.2.2.2.3.1.2.9.1.1 · 1 row entry · 4 columns
This table contains an entry for each UDP port configured
for UDP broadcast redirection.
nwIpRedirectEntry entry .1.3.6.1.4.1.52.4.2.2.2.3.1.2.9.1.1.1
Each entry contains the UDP port number of and IP Address
to which UDP packets received as LAN broadcasts, should be
redirected.
Indexes
nwIpRedirectPort
Column Syntax OID
nwIpRedirectPort mandatory
This is the primary index into the UDP redirector table,
identifying the UDP port number of the packets that will
be redirected.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.52.4.2.2.2.3.1.2.9.1.1.1.1
nwIpRedirectAddress mandatory
Sets the IP address to which the UDP broadcast packets
matching the UDP redirect port value (nwIpRedirectPort)
will be forwarded.
RFC1155-SMIIpAddressr/w
Textual Convention: RFC1155-SMIIpAddress OctetString
Type Constraints:
range: 4
.1.3.6.1.4.1.52.4.2.2.2.3.1.2.9.1.1.1.2
nwIpRedirectType mandatory
Set this object to enable or disable the redirector
feature for the UDP port specified by nwIpRedirectAddress.
Enumerationr/w
Enumerated Values:
1forward
2delete
.1.3.6.1.4.1.52.4.2.2.2.3.1.2.9.1.1.1.3
nwIpRedirectCount mandatory
Indicates how many UDP broadcast packets have been
redirected, as specified by this entry.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.52.4.2.2.2.3.1.2.9.1.1.1.4

nwIpEventFilterTable

table mandatory
.1.3.6.1.4.1.52.4.2.2.2.3.1.2.10.2.1 · 1 row entry · 6 columns
This table contains an entry for each event filter
configured for IP Routing Services events.
nwIpEventFilterEntry entry .1.3.6.1.4.1.52.4.2.2.2.3.1.2.10.2.1.1
Each entry describes an event filter which defines
a particular type of event to be logged to the event log.
The value of nwIpEventProtocol indicates the value used
in either the nwRtgProtocolTable or the nwComponentTa…
Indexes
nwIpEventFltrProtocol nwIpEventFltrIfNum
Column Syntax OID
nwIpEventFltrProtocol mandatory
Indicates the value of the Cabletron Routing Services
MIB nwRtgProtocolInstance or nwComponentRtgInstance
which identifies the protocol involved in the event for
which the event filter exists.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.52.4.2.2.2.3.1.2.10.2.1.1.1
nwIpEventFltrIfNum mandatory
Specifies the router port involved in the event for
which the event filter exists.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.52.4.2.2.2.3.1.2.10.2.1.1.2
nwIpEventFltrControl mandatory
Set this value to 3 to add the entry to the event
filter table. Set this value to 2 to remove the entry
from the event filter table.
Enumerationr/w
Enumerated Values:
1other
2delete
3add
.1.3.6.1.4.1.52.4.2.2.2.3.1.2.10.2.1.1.3
nwIpEventFltrType mandatory
This 6 bit mask specifies the types of events to
be logged. By default all 6 bits are set to 1,
indicating that all types of events are to be logged.
Setting any bit to 0 removes an event type from this field
and preve…
Enumerationr/w
Enumerated Values:
1misc
2timer
4rcv
8xmit
16event
32diags
64error
.1.3.6.1.4.1.52.4.2.2.2.3.1.2.10.2.1.1.4
nwIpEventFltrSeverity mandatory
Specifies the level of severity an event must meet
in order to be logged. Controls the amount of event
logging by ignoring events of a lower priority than
specified by this filter value. `Highmed' ignores only
events of…
Enumerationr/w
Enumerated Values:
1highest
2highmed
3highlow
.1.3.6.1.4.1.52.4.2.2.2.3.1.2.10.2.1.1.5
nwIpEventFltrAction mandatory
Specifies how the events are to be logged. Logging to the
`log' stores the events in the event log table
(nwIpEventFltrAction). Logging to `trap' sends events out
through the trap mechanism.
Enumerationr/w
Enumerated Values:
1log
2trap
3log-trap
.1.3.6.1.4.1.52.4.2.2.2.3.1.2.10.2.1.1.6

nwIpEventTable

table mandatory
.1.3.6.1.4.1.52.4.2.2.2.3.1.2.10.3.1 · 1 row entry · 7 columns
This table contains an entry for each event that has
been logged.
nwIpEventEntry entry .1.3.6.1.4.1.52.4.2.2.2.3.1.2.10.3.1.1
Each entry contains the information about an event
that has been logged to the event table.
Indexes
nwIpEventNumber
Column Syntax OID
nwIpEventNumber mandatory
An ordinal value assigned to the event for which the
log entry exists. nwIpEventNumber is assigned so that
each event in the event log can be uniquely identified
by the value of nwIpEventNumber.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.52.4.2.2.2.3.1.2.10.3.1.1.1
nwIpEventTime mandatory
Indicates the time at which the event was logged to
the event log.
RFC1155-SMITimeTicks
Textual Convention: RFC1155-SMITimeTicks Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.52.4.2.2.2.3.1.2.10.3.1.1.2
nwIpEventType mandatory
Indicates the type of event that was logged.
Enumeration
Enumerated Values:
1misc
2timer
4rcv
8xmit
16event
32diags
64error
.1.3.6.1.4.1.52.4.2.2.2.3.1.2.10.3.1.1.3
nwIpEventSeverity mandatory
Indicates the severity that was assigned to the event.
Enumeration
Enumerated Values:
1highest
2highmed
3highlow
.1.3.6.1.4.1.52.4.2.2.2.3.1.2.10.3.1.1.4
nwIpEventProtocol mandatory
Indicates the value of the Cabletron Routing Services
MIB nwRtgProtocolInstance or nwComponentInstance which
indentifies the protocol or component that was involved
in the event.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.52.4.2.2.2.3.1.2.10.3.1.1.5
nwIpEventIfNum mandatory
Indicates the router port that was involved in the event.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.52.4.2.2.2.3.1.2.10.3.1.1.6
nwIpEventTextString mandatory
Contains the actual text string that was logged.
OctetString .1.3.6.1.4.1.52.4.2.2.2.3.1.2.10.3.1.1.7

nwIpWgDefTable

table mandatory
.1.3.6.1.4.1.52.4.2.2.2.3.1.2.11.1 · 1 row entry · 9 columns
This table has an entry for each workgroup subnet definition.
It is indexed by and arbitrary integer indentifier.
nwIpWgDefEntry entry .1.3.6.1.4.1.52.4.2.2.2.3.1.2.11.1.1
Each entry specifies the configuration and status of an
individual work group.
Indexes
nwIpWgDefIdentifier
Column Syntax OID
nwIpWgDefIdentifier mandatory
An index into the definition table, unique to each entry,
arbitrarily assigned by the user.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.52.4.2.2.2.3.1.2.11.1.1.1
nwIpWgDefHostAddress mandatory
The IP address of the IP router host which applies to every
interface included in the workgroup.
RFC1155-SMIIpAddressr/w
Textual Convention: RFC1155-SMIIpAddress OctetString
Type Constraints:
range: 4
.1.3.6.1.4.1.52.4.2.2.2.3.1.2.11.1.1.2
nwIpWgDefSubnetMask mandatory
The subnet mask for the IP address above, thereby defining
the subnet which applies to every interface included in the
workgroup.
RFC1155-SMIIpAddressr/w
Textual Convention: RFC1155-SMIIpAddress OctetString
Type Constraints:
range: 4
.1.3.6.1.4.1.52.4.2.2.2.3.1.2.11.1.1.3
nwIpWgDefSecurity mandatory
A security level which applies to this workgroup as a whole.
Security applies in conjunction with the range table below,
which locks hosts to interfaces and/or physical address.
Packets are filtered out if security is v…
Enumerationr/w
Enumerated Values:
1none
2low
3medium
4high
.1.3.6.1.4.1.52.4.2.2.2.3.1.2.11.1.1.4
nwIpWgDefFastPath mandatory
Enabled (3) provides a fast path for packets through the
router when both source and destination are within this
workgroup - done mostly by skipping IP header validation.
Enumerationr/w
Enumerated Values:
1other
2disabled
3enabled
.1.3.6.1.4.1.52.4.2.2.2.3.1.2.11.1.1.5
nwIpWgDefRowStatus mandatory
This status instance does not support `createAndGo.'
A row entry should be created by a set of `createAndWait'
which brings the status to `notReady.' The missing row info
may then be supplied by setting nwIpWgDefHostAdd…
Enumerationr/w
Enumerated Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
.1.3.6.1.4.1.52.4.2.2.2.3.1.2.11.1.1.6
nwIpWgDefOperStatus mandatory
The operational status of this workgroup definition entry.
It will be `disabled' if this entry's row status is not active.
It will be `subnetConflict' if there is a conflict with an
existing active entry in this workgro…
Enumeration
Enumerated Values:
1ok
2disabled
3subnetConflict
4internalError
.1.3.6.1.4.1.52.4.2.2.2.3.1.2.11.1.1.7
nwIpWgDefNumActiveIntf mandatory
The number of interfaces (ports) in this workgroup which
have an operational status nwIpWgIfOperStatus of `OK' in the
IP Work Group Interface table below.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.52.4.2.2.2.3.1.2.11.1.1.8
nwIpWgDefNumTotalIntf mandatory
The number of interfaces (ports) in this workgroup which
have an administrative status nwIpWgIfRowStatus of `active'
in the IP Work Group Interface table below.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.52.4.2.2.2.3.1.2.11.1.1.9

nwIpWgIfTable

table mandatory
.1.3.6.1.4.1.52.4.2.2.2.3.1.2.11.2 · 1 row entry · 6 columns
This table contains an entry for each port in a workgroup.
It is indexed by the workgroup identifier and the MIB-II 
interface indentifier.
nwIpWgIfEntry entry .1.3.6.1.4.1.52.4.2.2.2.3.1.2.11.2.1
Each entry specifies the association of a router port to
a defined workgroup.
Indexes
nwIpWgIfDefIdent nwIpWgIfIfIndex
Column Syntax OID
nwIpWgIfDefIdent mandatory
The workgroup identifier. This is the primary index into
the IP Work Group Interface Table, matching the index into
the Definition Table above.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.52.4.2.2.2.3.1.2.11.2.1.1
nwIpWgIfIfIndex mandatory
The interface number. This is the secondary index into the
IP Work Group Interface Table, matching the primary index
into the MIB-2 IfTable which describes the router port.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.52.4.2.2.2.3.1.2.11.2.1.2
nwIpWgIfNumActiveHosts mandatory
The number of hosts known to be active on this interface in
this workgroup. These hosts are visible in the IP Work Group
Host Table below. Hosts age out and become inactive in
approximately 10 minutes if not rediscovere…
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.52.4.2.2.2.3.1.2.11.2.1.3
nwIpWgIfNumKnownHosts mandatory
The number of hosts seen on this interface in this workgroup
since this interface entry was last activated.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.52.4.2.2.2.3.1.2.11.2.1.4
nwIpWgIfRowStatus mandatory
This status instance supports `createAndGo' semantics
to create an active entry.
Enumerationr/w
Enumerated Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
.1.3.6.1.4.1.52.4.2.2.2.3.1.2.11.2.1.5
nwIpWgIfOperStatus mandatory
The operational status of this interface (port) entry.
It will be `disabled' if this entry's row status is not active.
It will be `workgroupInvalid' if either there is no workgroup
defined for this entry's nwIpWgIfDefI…
Enumeration
Enumerated Values:
1ok
2disabled
3workgroupInvalid
4addressConflict
5resetRequired
6linkDown
7routingDown
8internalError
.1.3.6.1.4.1.52.4.2.2.2.3.1.2.11.2.1.6

nwIpWgRngTable

table mandatory
.1.3.6.1.4.1.52.4.2.2.2.3.1.2.11.3 · 1 row entry · 6 columns
This table locks ranges of IP hosts (addresses) to ports.
Entries in this table represent explicit permissions. The
host(s) represented by a range entry may exchange packets
with this router if it (they) match the port specified in the
entry. Optionally physical address may be locked as well.
          
This table functions in concert with the workgroup security
level as defined in the IP Work Group Definition Table entry.
For hosts not entered in this table the default for a low
security workgroup is to permit packet exchange, whereas the
default for medium and high security is to deny packet
exchange.
nwIpWgRngEntry entry .1.3.6.1.4.1.52.4.2.2.2.3.1.2.11.3.1
Each entry configures a range of host IP addresses to be
associated with a given interface ( port ). If the range
consists of a single host address the entry may optionally
specify a physical address. The entry is index…
Indexes
nwIpWgRngBegHostAddr nwIpWgRngEndHostAddr nwIpWgRngIfIndex
Column Syntax OID
nwIpWgRngBegHostAddr mandatory
The beginning (lower) IP address of the address range.
This is the primary index into the IP Work Group Range Table.
RFC1155-SMIIpAddress
Textual Convention: RFC1155-SMIIpAddress OctetString
Type Constraints:
range: 4
.1.3.6.1.4.1.52.4.2.2.2.3.1.2.11.3.1.1
nwIpWgRngEndHostAddr mandatory
The ending (higher) IP address of the address range.
This is the secondary index of the IP Work Group Range Table.
RFC1155-SMIIpAddress
Textual Convention: RFC1155-SMIIpAddress OctetString
Type Constraints:
range: 4
.1.3.6.1.4.1.52.4.2.2.2.3.1.2.11.3.1.2
nwIpWgRngIfIndex mandatory
The interface number. This is the tertiary index into the
IP Work Group Interface Table, matching the primary index
into the MIB-2 IfTable which describes the router port.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.52.4.2.2.2.3.1.2.11.3.1.3
nwIpWgRngPhysAddr mandatory
The physical address of the host with the IP address given
in the nwIpWgRngBegHostAddr for this conceptual row entry.
Only single host range entry in which nwIpWgRngEndHostAddr is
the same as nwIpWgRngBegHostAddr may se…
OctetStringr/w .1.3.6.1.4.1.52.4.2.2.2.3.1.2.11.3.1.4
nwIpWgRngRowStatus mandatory
This status instance supports `createAndGo' semantics
to create an active entry.
Enumerationr/w
Enumerated Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
.1.3.6.1.4.1.52.4.2.2.2.3.1.2.11.3.1.5
nwIpWgRngOperStatus mandatory
The operational status of this range table entry.
It will be `disabled' if this entry's row status is not active.
It will be `workgroupInvalid' if either there is no workgroup
or if the operational status for the workg…
Enumeration
Enumerated Values:
1ok
2disabled
3workgroupInvalid
4interfaceInvalid
5physAddrRequired
6internalError
.1.3.6.1.4.1.52.4.2.2.2.3.1.2.11.3.1.6

nwIpWgHostTable

table mandatory
.1.3.6.1.4.1.52.4.2.2.2.3.1.2.11.4 · 1 row entry · 5 columns
A read only status table for hosts in workgroups.
It has the information similar to a net-to-media table.
nwIpWgHostEntry entry .1.3.6.1.4.1.52.4.2.2.2.3.1.2.11.4.1
Each entry shows a workgroup host. Entry is indexed by
IP address and interface (port). It gives the workgroup
and the physical address found for the host.
Indexes
nwIpWgHostHostAddr nwIpWgHostIfIndex
Column Syntax OID
nwIpWgHostHostAddr mandatory
The host IP address. This is the primary index to the
IP Work Group Host Table.
RFC1155-SMIIpAddress
Textual Convention: RFC1155-SMIIpAddress OctetString
Type Constraints:
range: 4
.1.3.6.1.4.1.52.4.2.2.2.3.1.2.11.4.1.1
nwIpWgHostIfIndex mandatory
The interface (port) number. This is the secondary index
to the IP Work Group Host Table, matching the primary index
to the MIB-2 IfTable which describes the router port.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.52.4.2.2.2.3.1.2.11.4.1.2
nwIpWgHostDefIdent mandatory
The workgroup identifier. This corresponds to the primary
index into the IP Work Group Interface Table.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.52.4.2.2.2.3.1.2.11.4.1.3
nwIpWgHostPhysAddr mandatory
The physical address of the host with the IP address given
in the nwIpWgHostHostAddr for this conceptual row entry.
OctetString .1.3.6.1.4.1.52.4.2.2.2.3.1.2.11.4.1.4
nwIpWgHostStatus mandatory
This status of the host with respect to the workgroup.

The host may be `unknown' if ARP has not discovered on which
port it resides.

The status of `invalid-multiple' means the same host
IP …
Enumeration
Enumerated Values:
1other
2unknown
3valid
4invalid-multiple
5invalid-physaddr
6invalid-range
7invalid-interface
8invalid-workgroup
9invalid-expired
.1.3.6.1.4.1.52.4.2.2.2.3.1.2.11.4.1.5