nwIpRipIfPriority
CTRON-IP-ROUTER-MIB ·
.1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.2.1.1.1.9
Object
column
mandatory
r/w
Integer32
This object does not apply to this protocol. It is a common object, inherited from the MIB framework used to provide a common management interface to all the Cabletron Routing Services protocol-specific MIBs. Setting this object has no effect.
Context
- MIB
- CTRON-IP-ROUTER-MIB
- OID
.1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.2.1.1.1.9- Type
- column
- Access
- readwrite
- Status
- mandatory
- Parent
- nwIpRipIfEntry
- Table
- nwIpRipIfTable
- Siblings
- 16
Syntax
Integer32
- Source
- COPS-PR-SPPIInteger32
- Base type
Integer32
Values & Constraints
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| nwIpRipIfIndex mandatory Indicates the value of MIB 2 ifindex, which identifies
the router port for which the entry exists. | column | Integer32 | .1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.2.1.1.1.1 |
| nwIpRipIfHelloTimer mandatory This object does not apply to this protocol. It is a
common object, inherited from the MIB framework used to
provide a common management interfaced to all the Cabletron
Rou… | column | Integer32 | .1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.2.1.1.1.10 |
| nwIpRipIfSplitHorizon mandatory Sets the operating condition of Split Horizon on the
router port for which the entry exists. When Split Horizon
is enabled, the RIP routing protocol keeps track of which
router po… | column | Enumeration | .1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.2.1.1.1.11 |
| nwIpRipIfPoisonReverse mandatory Sets the operating condition of Poison Reverse on the
router port for which the entry exists. When Poison Reverse
is enabled, the RIP routing protocol advertises any downed
route… | column | Enumeration | .1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.2.1.1.1.12 |
| nwIpRipIfSnooping mandatory Controls the operation of RIP Snooping on the router
port. When RIP Snooping is enabled the RIP routing protocol
operates in passive mode so that it receives route information,
bu… | column | Enumeration | .1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.2.1.1.1.13 |
| nwIpRipIfType mandatory Indicates whether the directly connected network segment
does or does not support broadcast media access. If broadcast
media access is supported, RIP advertisements are sent out o… | column | Enumeration | .1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.2.1.1.1.14 |
| nwIpRipIfXmitCost mandatory This object does not apply to this protocol. It is a
common object, inherited from the MIB framework used to
provide a common management interface to all the Cabletron
Routing Se… | column | Integer32 | .1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.2.1.1.1.15 |
| nwIpRipIfAclIdentifier mandatory Specifies the Access Control ID of the access control
list in effect for RIP routing protocol packets on the
router port for which the entry exists. A value of 0
indicates that t… | column | Integer32 | .1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.2.1.1.1.16 |
| nwIpRipIfAclStatus mandatory Controls the operation of the access control list
identified by nwIpRipIfAclIdentifier. Enabled (3) applies
the access control list to all RIP routing protocol packet
traffic on … | column | Enumeration | .1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.2.1.1.1.17 |
| nwIpRipIfAdminStatus mandatory Sets the administrative state of the RIP routing protocol
on the router port for which the entry exists. Enabled (3)
causes RIP to become active on the router port. Disabled (2)
c… | column | Enumeration | .1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.2.1.1.1.2 |
| nwIpRipIfOperStatus mandatory Indicates the current operating condition of the RIP
routing protocol on the router port for which the entry
exists. The value of nwIpRipIfOperStatus indicates any problem
with yo… | column | Enumeration | .1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.2.1.1.1.3 |
| nwIpRipIfOperationalTime mandatory Indicates the elapsed time, in hundredths of a second,
nwIpRipIfOperStatus, has been in its current state. | column | RFC1155-SMITimeTicks | .1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.2.1.1.1.4 |
| nwIpRipIfVersion mandatory Indicates the revision level of the RIP routing protocol
firmware on the router port for which the entry exists, in
textual format. | column | Integer32 | .1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.2.1.1.1.5 |
| nwIpRipIfAdvertisement mandatory Sets the interval, in seconds, at which RIP advertises
the RIP route table on the router port for which the entry
exists. | column | Integer32 | .1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.2.1.1.1.6 |
| nwIpRipIfFloodDelay mandatory Sets the length of time, in seconds, that the RIP routing
protocol should wait after discovering that a directly
connected route has gone down, before flooding updates
(triggered … | column | Integer32 | .1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.2.1.1.1.7 |
| nwIpRipIfRequestDelay mandatory Sets the length of time, in hundredths of a second, that
the RIP routing protocol should wait after receiving a
route request packet, before sending a response on the
router por… | column | Integer32 | .1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.2.1.1.1.8 |