nwIpOspfIfType
CTRON-IP-ROUTER-MIB ·
.1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.2.1.2.1.1.1.7
Object
column
mandatory
Enumeration
Specifies whether the attached network segment does or does not support broadcast media access. bma (2) indicates that route advertisements can be sent as broadcasts. nbma (3) indicates that route advertisements must be addresses directly to each neighbor.
Context
- MIB
- CTRON-IP-ROUTER-MIB
- OID
.1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.2.1.2.1.1.1.7- Type
- column
- Access
- readonly
- Status
- mandatory
- Parent
- nwIpOspfIfEntry
- Table
- nwIpOspfIfTable
- Siblings
- 8
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | other |
2 | bma |
3 | nbma |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| nwIpOspfIfIndex mandatory This is the primary index into the OSPF interface table.
This number corresponds to the index into the MIB-2
Interface Table which describes the router port for
which the entry ex… | column | Integer32 | .1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.2.1.2.1.1.1.1 |
| nwIpOspfIfAdminStatus mandatory Sets the administrative state of OSPF on the IP router
port for which the entry exists. enabled(3)
causes OSPF to become active on the router port.
disabled(2) causes OSPF to beco… | column | Enumeration | .1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.2.1.2.1.1.1.2 |
| nwIpOspfIfOperStatus mandatory Sets the administrative state of OSPF on the IP
router port for which the entry exists. enabled(3)
causes OSPF to become active on the router port.
disabled(2) causes OSPF to beco… | column | Enumeration | .1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.2.1.2.1.1.1.3 |
| nwIpOspfIfOperationalTime mandatory Indicates the elapsed time, in hundredths of a second,
that nwIpOspfIfAdminStatus has been in its current state. | column | RFC1155-SMITimeTicks | .1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.2.1.2.1.1.1.4 |
| nwIpOspfIfVersion mandatory Indicates the OSPF protocol revision level supported on
the router port. | column | Integer32 | .1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.2.1.2.1.1.1.5 |
| nwIpOspfIfSnooping mandatory Controls the operation of OSPF Snooping on the IP
router port for which the entry exists.OSPF
Snooping is operating OSPF in passive mode, so it receives
route information, builds … | column | Enumeration | .1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.2.1.2.1.1.1.6 |
| nwIpOspfIfAclIdentifier mandatory Specifies the Access Control List ID of the access
control list applied to OSPF traffic on the IP router
port for which the entry exists. A value of
0 indicates that no Access Lis… | column | Integer32 | .1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.2.1.2.1.1.1.8 |
| nwIpOspfIfAclStatus mandatory Controls the operation of the access list configured for
OSPF traffic on the IP router port for which the entry exists.
enabled(3) causes the access list to be applied. disabled(2… | column | Enumeration | .1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.2.1.2.1.1.1.9 |