CTATM-CONFIG-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
13
Rows
13
Columns
57

ctATMDefApplicationTable

table obsolete
.1.3.6.1.4.1.52.4.1.2.10.1.1.3 · 1 row entry · 2 columns
Open in standard view 
A list of Default Application objects for this interface.
ctATMDefApplicationEntry entry .1.3.6.1.4.1.52.4.1.2.10.1.1.3.1
An entry containing objects pertaining to the default
application on a physical interface.
Indexes
Column Syntax OID
ctATMDefApplicationIfIndex obsolete
Returns an index for the physical interface to which the
information in this table pertains. It is equal to the MIB-II
ifIndex.
Integer32
Constraints:
range: 1-512
 .1.3.6.1.4.1.52.4.1.2.10.1.1.3.1.1
ctATMDefApplication obsolete
The default application to be run on this physical ATM
interface.

Selecting lane04 will cause the application known as FORE LAN
Emulation 0.4 to be the default application on this interface
using the spa…
Enumerationr/w
Enumerated Values:
1lane04
2lane
 .1.3.6.1.4.1.52.4.1.2.10.1.1.3.1.2

ctATMFramerStatusTable

table obsolete
.1.3.6.1.4.1.52.4.1.2.10.1.1.4 · 1 row entry · 2 columns
Open in standard view 
A list of framer status objects for this interface.
ctATMFramerStatusEntry entry .1.3.6.1.4.1.52.4.1.2.10.1.1.4.1
An entry containing objects pertaining to status of the framer
on a physical interface.
Indexes
Column Syntax OID
ctATMFramerStatusIfIndex obsolete
Returns an index for the physical interface to which the
information in this table pertains. It is equal to the MIB-II
ifIndex.
Integer32
Constraints:
range: 1-512
 .1.3.6.1.4.1.52.4.1.2.10.1.1.4.1.1
ctATMFramerStatus obsolete
Setting this object to on will activate the Framer MIBs as
specified by either RFC-1595 or RFC-1407 depending on whether
the interface uses SONET framing or DS3 framing respectively.
i.e., setting it to on will permit g…
Enumerationr/w
Enumerated Values:
1on
2off
 .1.3.6.1.4.1.52.4.1.2.10.1.1.4.1.2

ctATMLecArpMacTable

table
.1.3.6.1.4.1.52.4.1.2.10.1.1.5 · 1 row entry · 6 columns
Open in standard view 
A list of LEC-Index, MAC-address, associated with a particular
VPI, VCI and ATM-address objects on this device.
ctATMLecArpMacEntry entry .1.3.6.1.4.1.52.4.1.2.10.1.1.5.1
An entry containing objects pertaining to LEC Index,
MAC-address, associated with a particular VPI, VCI and
and ATM-address on this device.
Indexes
lecIndex leArpMacAddress
Column Syntax OID
ctATMLecArpMacLecIndex obsolete
The lecIndex of the LEC which has learned the MAC-address
given by ctATMLecArpMacAddress.
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.52.4.1.2.10.1.1.5.1.1
ctATMLecArpMacAddress obsolete
The MAC-address which is learned by this LEC.
OctetString
Constraints:
range: 6-6
 .1.3.6.1.4.1.52.4.1.2.10.1.1.5.1.2
ctATMLecArpMacElanName
The name of the ELAN which is joined by this LEC.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.52.4.1.2.10.1.1.5.1.3
ctATMLecArpMacVpi
The data-direct VPI over which traffic destined for the
MAC-address ctATMLecArpMacAddress is sent.
Integer32
Constraints:
range: 1-4095
 .1.3.6.1.4.1.52.4.1.2.10.1.1.5.1.4
ctATMLecArpMacVci
The data-direct VCI over which traffic destined for the
MAC-address ctATMLecArpMacAddress is sent.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.52.4.1.2.10.1.1.5.1.5
ctATMLecArpMacATMAddress
The ATM-address of the destination end-station which is the
logical destination of the MAC-address ctATMLecArpMacAddress.

The ATM address is returned in a form suitable for printing.
The format (separator…
OctetString
Constraints:
range: 32-32
 .1.3.6.1.4.1.52.4.1.2.10.1.1.5.1.6

ctATMPvcBwAllocTable

table
.1.3.6.1.4.1.52.4.1.2.10.1.1.6 · 1 row entry · 3 columns
Open in standard view 
A list of PvcBwAllocEntries for this physical interface.
ctATMPvcBwAllocEntry entry .1.3.6.1.4.1.52.4.1.2.10.1.1.6.1
An entry containing objects pertaining to Bandwidth
Allocation.
Indexes
Column Syntax OID
ctATMPvcBwAllocPhysIface obsolete
Returns an index for the physical interface to which the
information in this table pertains. It is equal to the
MIB-II ifIndex.
Integer32
Constraints:
range: 1-512
 .1.3.6.1.4.1.52.4.1.2.10.1.1.6.1.1
ctATMPvcBwAllocStatus
The values on and off can be written to this object. Selecting
on will enable bandwidth allocation mode on this interface. When
this mode is enabled all LECs and PVCs currently configured on
this interface will be dele…
Enumerationr/w
Enumerated Values:
1on
2off
3notSupported
 .1.3.6.1.4.1.52.4.1.2.10.1.1.6.1.2
ctATMPvcBwAllocBandwidth obsolete
Returns the amount of bandwidth in use on this ATM
interface in bits per second.
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.52.4.1.2.10.1.1.6.1.3

ctATMDiscoveryElanTable

table
.1.3.6.1.4.1.52.4.1.2.10.1.1.7 · 1 row entry · 5 columns
Open in standard view 
A list of DiscoveryElanEntries for this physical interface.
ctATMDiscoveryElanEntry entry .1.3.6.1.4.1.52.4.1.2.10.1.1.7.1
An entry containing objects pertaining to discovering elans.
Indexes
RFC1213-MIBifIndex ctATMDiscoveryElanIndex
Column Syntax OID
ctATMDiscoveryElanIndex
There are a fixed number of elans (1 - MAX_ELANS) per
physical interface to initiate the discovery process on.
This is the index for these elans. This is NOT related
to the LEC Index.
Integer32
Constraints:
range: 1-16
 .1.3.6.1.4.1.52.4.1.2.10.1.1.7.1.1
ctATMDiscoveryElanName
The device will try to discover, on this named elan, any
other devices out in the atm cloud that it should set up an
svc with. This allows flexibility in the number and location
of other switches this particular phys…
OctetStringr/w
Constraints:
range: 32-32
 .1.3.6.1.4.1.52.4.1.2.10.1.1.7.1.2
ctATMDiscoveryElanMode
Master indicates other elans may discover this elan whereas
slave elans may only discover other elans.
Enumerationr/w
Enumerated Values:
1ctATMDiscoveryElanMaster
2ctATMDiscoveryElanSlave
 .1.3.6.1.4.1.52.4.1.2.10.1.1.7.1.3
ctATMDiscoveryElanStatus
Enabled indicates this elan should be used in the
discovery process whereas disabled elans are not.
Enumerationr/w
Enumerated Values:
1ctATMDiscoveryElanEnabled
2ctATmDiscoveryElanDisabled
 .1.3.6.1.4.1.52.4.1.2.10.1.1.7.1.4
ctATMDiscoveryElanPhysIface obsolete
The physical interface number on which to initiate the
discovery processes.
Integer32
Constraints:
range: 1-512
 .1.3.6.1.4.1.52.4.1.2.10.1.1.7.1.5

ctATMVclTable

table
.1.3.6.1.4.1.52.4.1.2.10.1.1.8 · 1 row entry · 7 columns
Open in standard view 
A list of physical interface number, VPI, VCI, associated
with a virtual ifIndex, application port, ATM Address, and 
Encapsulation type on this device.
ctATMVclEntry entry .1.3.6.1.4.1.52.4.1.2.10.1.1.8.1
An entry containing objects pertaining to physical interface
number, VPI, VCI, associated with a particular virtual ifIndex,
application port, ATM Address, and Encapsulation type on this
device.
Indexes
RFC1213-MIBifIndex ATM-MIBatmVclVpi ATM-MIBatmVclVci
Column Syntax OID
ctATMVclIfIndex obsolete
Returns an index for the physical interface to which the information
in this table pertains. It is equal to the MIB-II ifIndex.
Integer32
Constraints:
range: 1-512
 .1.3.6.1.4.1.52.4.1.2.10.1.1.8.1.1
ctATMVclVpi obsolete
The VPI value of the VCL.
Integer32
Constraints:
range: 1-4095
 .1.3.6.1.4.1.52.4.1.2.10.1.1.8.1.2
ctATMVclVci obsolete
The VCI value of the VCL.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.52.4.1.2.10.1.1.8.1.3
ctATMVclVirtualIfIndex
Returns an index for the virtual interface to which the information
in this table pertains. It is equal to the MIB-II ifIndex.
Integer32
Constraints:
range: 1-512
 .1.3.6.1.4.1.52.4.1.2.10.1.1.8.1.4
ctATMVclApplicationPort
Returns an index for the application port to which the
information in this table pertains.
Integer32
Constraints:
range: 1-512
 .1.3.6.1.4.1.52.4.1.2.10.1.1.8.1.5
ctATMVclATMAddress
The ATM-address of the channel entry defined by ctATMVclEntry.

The ATM address is returned in a form suitable for printing.
The format (separators etc.) is implementation dependent.
However, it is recomme…
AtmAddress
Textual Convention: AtmAddress OctetString
Type Constraints:
range: 20
 .1.3.6.1.4.1.52.4.1.2.10.1.1.8.1.6
ctATMVclEncapsulationType
An instance of this object only exists when the local VCL
end-point is also the VCC end-point, and AAL5 is in use.
The type of data encapsulation used over the AAL5 SSCS layer.
The definitions reference RFC 1483 Multipr…
Enumeration
Enumerated Values:
1vcMultiplexRoutedProtocol
2vcMultiplexBridgedProtocol8023
3vcMultiplexBridgedProtocol8025
4vcMultiplexBridgedProtocol8026
5vcMultiplexLANemulation8023
6vcMultiplexLANemulation8025
7llcEncapsulation
8multiprotocolFrameRelaySscs
9other
10unknown
11ilmi
12uni
13lanEmulationData
14lanEmulationControl
15atmVcSvcApp
16multiProtocolOverATMData
17multiProtocolOverATMControl
 .1.3.6.1.4.1.52.4.1.2.10.1.1.8.1.7

ctATMPhyRedundTable

table
.1.3.6.1.4.1.52.4.1.2.10.1.2.1.1 · 1 row entry · 10 columns
Open in standard view 
A list of redundancy objects for this physical interface.
ctATMPhyRedundEntry entry .1.3.6.1.4.1.52.4.1.2.10.1.2.1.1.1
An entry containing objects pertaining to ATM physical
redundancy for a physical interface.
Indexes
Column Syntax OID
ctATMPhyRedundIfIndex obsolete
Returns an index for the physical interface to which the
information in this table pertains. It is equal to the MIB-II
ifIndex.
Integer32
Constraints:
range: 1-512
 .1.3.6.1.4.1.52.4.1.2.10.1.2.1.1.1.1
ctATMPhyRedundPrimaryPort
The physical port number to be used as the primary port. The primary
port is the default port to become active and the port of priority,
i.e. regardless of the status of the current active port, if the
primary can be u…
Integer32r/w
Constraints:
range: 1-16
 .1.3.6.1.4.1.52.4.1.2.10.1.2.1.1.1.2
ctATMPhyRedundActivePort
The physical port number to be used as the active port. The
primary port defaults as the active port if this object is not set.

Rules:

- This object can always be set when ctATMPhyRedundSt…
Integer32r/w
Constraints:
range: 1-16
 .1.3.6.1.4.1.52.4.1.2.10.1.2.1.1.1.3
ctATMPhyRedundStatus
If this object is set to enable, then redundancy for this
interface is enabled.

If this object is set to disable, redundancy is disabled. If
redundancy is disabled, then automatic switching to backup port…
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.52.4.1.2.10.1.2.1.1.1.4
ctATMPhyRedundActivation
If this object is set to automatic, a backup port will
automatically be activated upon failure of the active port.

If this object is set to manual, it will require the manual
setting of ctATMPhyRedundAct…
Enumerationr/w
Enumerated Values:
1automatic
2manual
 .1.3.6.1.4.1.52.4.1.2.10.1.2.1.1.1.5
ctATMPhyRedundPrimaryRevert
If this object is set to automatic, the primary port will
automatically be activated upon identifying it to be valid
at any time.

If this object is set to manual, then the currently active
port will not …
Enumerationr/w
Enumerated Values:
1automatic
2manual
 .1.3.6.1.4.1.52.4.1.2.10.1.2.1.1.1.6
ctATMPhyRedundPerformTest
If this object is set to enable, then the automatic test
(at the time given by ctATMPhyRedundTestTOD) is enabled.
The test is periodic with a period of 24 hours.

If this object is set to disable, then the…
Enumerationr/w
Enumerated Values:
1enable
2disable
3immediate
 .1.3.6.1.4.1.52.4.1.2.10.1.2.1.1.1.7
ctATMPhyRedundTestTOD
Setting this object will set the time of day at which each
redundant port of this interface will be tested for validity.
The value is a null terminated string in either hh:mm:ss or
hh.mm.ss or hh:mm.ss or hh.mm:ss forma…
OctetStringr/w
Constraints:
range: 9-9
 .1.3.6.1.4.1.52.4.1.2.10.1.2.1.1.1.8
ctATMPhyRedundTestResult
This object returns the status of the last test performed on
all the ports. If the test was performed as a result of
ctATMPhyRedundPerformTest.immediate, then the value of this
object is of the form 1xx. If the test was…
Enumeration
Enumerated Values:
100manualAllPortsGood
101manualPrimaryBadOthersGood
102manualPrimaryGoodOthersBad
103manualPrimaryBadOthersBad
200automaticAllPortsGood
201automaticPrimaryBadOthersGood
202automaticPrimaryGoodOthersBad
203automaticPrimaryBadOthersBad
 .1.3.6.1.4.1.52.4.1.2.10.1.2.1.1.1.9
ctATMPhyRedundReset
If this object is set to reset, the state of redundancy on
this interface will be reset to factory defaults.

When read this object will always return 1.
Enumerationr/w
Enumerated Values:
1reset
 .1.3.6.1.4.1.52.4.1.2.10.1.2.1.1.1.10

ctATMIlmiTable

table
.1.3.6.1.4.1.52.4.1.2.10.1.3.1 · 1 row entry · 5 columns
Open in standard view 
A list of ILMI objects for this physical ATM interface.
ctATMIlmiEntry entry .1.3.6.1.4.1.52.4.1.2.10.1.3.1.1
An entry containing objects pertaining to ILMI for this
physical ATM interface.
Indexes
Column Syntax OID
ctATMIlmiIfIndex obsolete
Returns an index for the physical interface to which the
information in this table pertains. It is equal to the MIB-II
interface number for this interface.
Integer32
Constraints:
range: 1-512
 .1.3.6.1.4.1.52.4.1.2.10.1.3.1.1.1
ctATMIlmiStatus
If this object is set to enableAutoConfigure, then ILMI on
this interface will attempt to automatically configure the
version of UNI to use on this interface. After the auto
configure process has completed, the version …
Enumerationr/w
Enumerated Values:
1enableAutoConfigure
2enable
3disable
 .1.3.6.1.4.1.52.4.1.2.10.1.3.1.1.2
ctATMIlmiAtmAddress
This object is used as the ATM address of this interface
if ILMI on this interface is disabled i.e, the value of
IlmiStatus is set to disable.

If ILMI address registration is successful (ctATMIlmiState i…
AtmAddressr/w
Textual Convention: AtmAddress OctetString
Type Constraints:
range: 20
 .1.3.6.1.4.1.52.4.1.2.10.1.3.1.1.3
ctATMIlmiState
This object describes the current state of ILMI on this
interface.

The meaning of the various values returned is as follows:
unknown -ILMI is in the process of becoming
…
Enumeration
Enumerated Values:
1unknown
2up
3addressRegistration
4autoconfigure
5down
6estabConnectivity
7noLink
8obtainLECS
 .1.3.6.1.4.1.52.4.1.2.10.1.3.1.1.4
ctATMIlmiRestart
Setting this object to restart will restart ILMI on this
interface.

Reading this object always returns a 1.
Enumerationr/w
Enumerated Values:
1restart
 .1.3.6.1.4.1.52.4.1.2.10.1.3.1.1.5

ctATMSignalTable

table
.1.3.6.1.4.1.52.4.1.2.10.1.4.1 · 1 row entry · 6 columns
Open in standard view 
A list of signaling object for this interface.
ctATMSignalEntry entry .1.3.6.1.4.1.52.4.1.2.10.1.4.1.1
An entry containing objects pertaining to ATM signaling
on a physical interface.
Indexes
Column Syntax OID
ctATMSignalIfIndex obsolete
Returns an index for the physical interface to which the
information in this table pertains. It is equal to ifIndex.
Integer32
Constraints:
range: 1-512
 .1.3.6.1.4.1.52.4.1.2.10.1.4.1.1.1
ctATMSignalStatus
If this object is set to enable, the signalling for this
interface is enabled. If this object is set to disable,
signalling is disabled. When read, this object returns the
state of the object based on the last request m…
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.52.4.1.2.10.1.4.1.1.2
ctATMSignalType
The type of signalling to be used on this interface.

Setting this object to spans will cause the FORE SPANS
protocol to be used for signalling on this interface.

Setting this object to any …
Enumerationr/w
Enumerated Values:
1unknown
2spans
3uni30
4uni31
5uni40
 .1.3.6.1.4.1.52.4.1.2.10.1.4.1.1.3
ctATMSignalQ93Status
If ctATMSignalType is other than spans, then the value
of this object is the state of the layer 3 signalling stack
on this interface.
Enumeration
Enumerated Values:
1up
2down
 .1.3.6.1.4.1.52.4.1.2.10.1.4.1.1.4
ctATMSignalQsaalStatus
If ctATMSignalType is other than spans, then the value
of this object is the state of the layer-2 signalling stack
(Q.SAAL) on this interface.
Enumeration
Enumerated Values:
1up
2down
 .1.3.6.1.4.1.52.4.1.2.10.1.4.1.1.5
ctATMSignalRestart
Setting this object to restart will restart signalling on this
interface. Reading this object always returns a 1.
Enumerationr/w
Enumerated Values:
1restart
 .1.3.6.1.4.1.52.4.1.2.10.1.4.1.1.6

ctATMLANEInfoExtStatusTable

table
.1.3.6.1.4.1.52.4.1.2.10.1.6.1 · 1 row entry · 6 columns
Open in standard view 
Defines extentions to the lecConfigTable and the lecStatusTable
in the ATM Forum's LANE MIB.
ctATMLANEInfoExtStatusEntry entry .1.3.6.1.4.1.52.4.1.2.10.1.6.1.1
An entry containing objects describing information about an
LEC (LAN Emulation Client). It is instanced by lecIndex which
is the same as what is defined in the ATM Forum's LAN Emulation
MIB.
Indexes
lecIndex
Column Syntax OID
ctATMLANEInfoExtStatusUpTime
The amount of time in milliseconds since the LEC has reached the
operational state. It will read 0 if the LEC is not operational.
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.52.4.1.2.10.1.6.1.1.1
ctATMLANEInfoExtStatus
LEC_active - The LEC is actually trying to become or is
operational.
See lecInterfaceState in the ATM Forum's LAN
Emulation MIB to see which state the LEC is in.
LEC_notInService - The LEC is not trying to be…
Enumeration
Enumerated Values:
1lecactive
2lecnotInService
3lecnoLink
4lecnoATMaddrnoUNI
5lecnoATMaddr
6lecnoUNI
7lecmemError
 .1.3.6.1.4.1.52.4.1.2.10.1.6.1.1.2
ctATMLANEInfoExtStatusSendTopo
This configuration value is used to define whether or not this LEC
should send a LE_TOPOLOGY_CHANGE message when the situation presents
itself.
Enumerationr/w
Enumerated Values:
1on
2off
 .1.3.6.1.4.1.52.4.1.2.10.1.6.1.1.3
ctATMLANEInfoExtStatusTimeLeft
A string used to describe the amount of time left in a certain
LEC state before the LEC will try again in that state. This will
read NULL if the LEC is operational.
OctetString
Constraints:
range: 32-32
 .1.3.6.1.4.1.52.4.1.2.10.1.6.1.1.4
ctATMLANEInfoExtStatusNumQueues
This configuration value is used to define the number of traffic
descriptors used by this LEC to implement Traffic Mangement.
It's value ranges from 1 to ctATMLANEInfoExtStatusMaxNumQueues.
Integer32r/w
Constraints:
range: 1-32
 .1.3.6.1.4.1.52.4.1.2.10.1.6.1.1.5
ctATMLANEInfoExtStatusMaxNumQueues
Defines the maximum number that ctATMLANEInfoExtNumQueues can be
set to.
Integer32
Constraints:
range: 1-32
 .1.3.6.1.4.1.52.4.1.2.10.1.6.1.1.6

ctATMLANEInfoExtTMTable

table
.1.3.6.1.4.1.52.4.1.2.10.1.6.2 · 1 row entry · 2 columns
Open in standard view 
Defines a list, of length ctATMLANEInfoExtStatusNumQueues, of traffic
descriptor indexes matching atmTrafficDescrParamIndex in the
atmTrafficDescrParamTable defined in the RFC 1695.
ctATMLANEInfoExtTMEntry entry .1.3.6.1.4.1.52.4.1.2.10.1.6.2.1
An entry containing OBJECTS describing information about
an LEC's (LAN Emulation Client) Traffic Management parameters.
It is instanced by lecIndex, which is the same as what is defined
in the ATM Forum's LAN Emulation …
Indexes
lecIndex ctATMLANEInfoExtTMIndex
Column Syntax OID
ctATMLANEInfoExtTMIndex
Defines the list index and will range from 1 to
ctATMLANEInfoExtStatusNumQueues.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.1.2.10.1.6.2.1.1
ctATMLANEInfoExtTMTrafficDescrIndex
Defines a traffic descriptor index that matches the index
atmTrafficDescrParamIndex in the atmTrafficDescrParamTable
defined in the RFC 1695.

NOTE: This table will always be at least of length 1.
In th…
ATM-TC-MIBAtmTrafficDescrParamIndexr/w
Textual Convention: ATM-TC-MIBAtmTrafficDescrParamIndex Integer32
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.52.4.1.2.10.1.6.2.1.2

ctATMTrafficDescrNameTable

table
.1.3.6.1.4.1.52.4.1.2.10.1.7.1 · 1 row entry · 1 columns
Open in standard view 
An association between a string describing a traffic 
descriptor and a traffic descriptor index into the 
atmTrafficDescrParamTable in RFC 1695.
ctATMTrafficDescrNameEntry entry .1.3.6.1.4.1.52.4.1.2.10.1.7.1.1
An entry containing objects associating a string describing
a traffic descriptor on this device and a traffic descriptor
index into the atmTrafficDescrParamTable in RFC 1695.
Indexes
ATM-MIBatmTrafficDescrParamIndex
Column Syntax OID
ctATMTrafficDescrName
The name of the traffic descriptor.
OctetStringr/w
Constraints:
range: 32-32
 .1.3.6.1.4.1.52.4.1.2.10.1.7.1.1.1

ctATMTrafficServiceCategoriesSupportedTable

table
.1.3.6.1.4.1.52.4.1.2.10.1.7.2 · 1 row entry · 2 columns
Open in standard view 
A table related to traffic management service categories supported.
ctATMTrafficServiceCategoriesSupportedEntry entry .1.3.6.1.4.1.52.4.1.2.10.1.7.2.1
A table entry containing information related to the traffic
management service categories that are supported for a certain
physical interface.
Indexes
Column Syntax OID
ctATMTrafficServiceCategoriesSupportedBitMask
This indicates the traffic service categories supported by this
physical interface.

other(0) Undefined, or service category unknown
PVC Bandwidth Allocation(1) Proprie…
Bits
Enumerated Values:
0other
1pvcBandwidthAllocation
2cbr
3vbrnrt
4ubr
5abr
6vbrrt
 .1.3.6.1.4.1.52.4.1.2.10.1.7.2.1.1
ctATMTrafficManagementAllocBandwidth
Returns the amount of bandwidth in use on this ATM
interface in bits per second. Value only valid when
running more than just UBR traffic.
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.52.4.1.2.10.1.7.2.1.2