ctATMIlmiStatus
CTATM-CONFIG-MIB ·
.1.3.6.1.4.1.52.4.1.2.10.1.3.1.1.2
Object
column
r/w
Enumeration
If this object is set to enableAutoConfigure, then ILMI on
this interface will attempt to automatically configure the
version of UNI to use on this interface. After the auto
configure process has completed, the version of UNI this interface
is running can be obtained by reading the ctATMSignalType
object.
If this object is set to enable, the ILMI for this
interface is enabled.
If enabled (with or without auto-configure), ILMI on this
interface will attempt address registration.
If this object is set to disable, auto-configure and address
registration are both disabled. The signalling to use on this
interface is then dictated by the value of ctATMSignalType.
If disabled, the ILMI channel (0/16) will not be created.
It is an error to set a value other than disable to this
object when ctATMDefApplication is set to lane04.
It is an error to write to ctATMSignalType when this object is
set to enableAutoConfigure.
This object is persistent, i.e, it will retain its value
between powerdowns.
Context
- MIB
- CTATM-CONFIG-MIB
- OID
.1.3.6.1.4.1.52.4.1.2.10.1.3.1.1.2- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- ctATMIlmiEntry
- Table
- ctATMIlmiTable
- Siblings
- 4
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | enableAutoConfigure |
2 | enable |
3 | disable |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| ctATMIlmiIfIndex obsolete Returns an index for the physical interface to which the
information in this table pertains. It is equal to the MIB-II
interface number for this interface. | column | Integer32 | .1.3.6.1.4.1.52.4.1.2.10.1.3.1.1.1 |
| ctATMIlmiAtmAddress This object is used as the ATM address of this interface
if ILMI on this interface is disabled i.e, the value of
IlmiStatus is set to disable.
If ILMI address regi… | column | AtmAddress | .1.3.6.1.4.1.52.4.1.2.10.1.3.1.1.3 |
| ctATMIlmiState This object describes the current state of ILMI on this
interface.
The meaning of the various values returned is as follows:
unknown -ILMI is in the p… | column | Enumeration | .1.3.6.1.4.1.52.4.1.2.10.1.3.1.1.4 |
| ctATMIlmiRestart Setting this object to restart will restart ILMI on this
interface.
Reading this object always returns a 1. | column | Enumeration | .1.3.6.1.4.1.52.4.1.2.10.1.3.1.1.5 |