ctATMPhyRedundPrimaryPort
CTATM-CONFIG-MIB ·
.1.3.6.1.4.1.52.4.1.2.10.1.2.1.1.1.2
Object
column
r/w
Integer32
The physical port number to be used as the primary port. The primary
port is the default port to become active and the port of priority,
i.e. regardless of the status of the current active port, if the
primary can be used (and Redundancy is set up to activate it when it
becomes available--see ctATMPhyRedundPrimaryRevert), it will be.
The write will NOT take effect immediately. It will wait until
the NEXT time that the redundancy algorithm determines that the
primary port should be used.
This object is persistent. i.e., it will retain its value between
powerdowns.
Context
- MIB
- CTATM-CONFIG-MIB
- OID
.1.3.6.1.4.1.52.4.1.2.10.1.2.1.1.1.2- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- ctATMPhyRedundEntry
- Table
- ctATMPhyRedundTable
- Siblings
- 9
Syntax
Integer32
Values & Constraints
Object Constraints
range: 1-16
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| ctATMPhyRedundIfIndex obsolete Returns an index for the physical interface to which the
information in this table pertains. It is equal to the MIB-II
ifIndex. | column | Integer32 | .1.3.6.1.4.1.52.4.1.2.10.1.2.1.1.1.1 |
| ctATMPhyRedundReset If this object is set to reset, the state of redundancy on
this interface will be reset to factory defaults.
When read this object will always return 1. | column | Enumeration | .1.3.6.1.4.1.52.4.1.2.10.1.2.1.1.1.10 |
| ctATMPhyRedundActivePort The physical port number to be used as the active port. The
primary port defaults as the active port if this object is not set.
Rules:
- This object… | column | Integer32 | .1.3.6.1.4.1.52.4.1.2.10.1.2.1.1.1.3 |
| ctATMPhyRedundStatus If this object is set to enable, then redundancy for this
interface is enabled.
If this object is set to disable, redundancy is disabled. If
redundancy is disabled,… | column | Enumeration | .1.3.6.1.4.1.52.4.1.2.10.1.2.1.1.1.4 |
| ctATMPhyRedundActivation If this object is set to automatic, a backup port will
automatically be activated upon failure of the active port.
If this object is set to manual, it will require… | column | Enumeration | .1.3.6.1.4.1.52.4.1.2.10.1.2.1.1.1.5 |
| ctATMPhyRedundPrimaryRevert If this object is set to automatic, the primary port will
automatically be activated upon identifying it to be valid
at any time.
If this object is set to manual, … | column | Enumeration | .1.3.6.1.4.1.52.4.1.2.10.1.2.1.1.1.6 |
| ctATMPhyRedundPerformTest If this object is set to enable, then the automatic test
(at the time given by ctATMPhyRedundTestTOD) is enabled.
The test is periodic with a period of 24 hours.
If… | column | Enumeration | .1.3.6.1.4.1.52.4.1.2.10.1.2.1.1.1.7 |
| ctATMPhyRedundTestTOD Setting this object will set the time of day at which each
redundant port of this interface will be tested for validity.
The value is a null terminated string in either hh:mm:ss o… | column | OctetString | .1.3.6.1.4.1.52.4.1.2.10.1.2.1.1.1.8 |
| ctATMPhyRedundTestResult This object returns the status of the last test performed on
all the ports. If the test was performed as a result of
ctATMPhyRedundPerformTest.immediate, then the value of this
ob… | column | Enumeration | .1.3.6.1.4.1.52.4.1.2.10.1.2.1.1.1.9 |