CISCO-WAN-VISM-TONE-PLAN-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
2
Rows
2
Columns
21

vismTonePlanTable

table
.1.3.6.1.4.1.351.150.24.1.1.2.1 · 1 row entry · 6 columns
Open in standard view 
This table contains configuration information about different 
Tone Plans. 
          
The first 32 entries of the table are 'provisionable' 
followed by an implementation specific number 
of 'builtIn' entries.
vismTonePlanEntry entry .1.3.6.1.4.1.351.150.24.1.1.2.1.1
An entry in the vismTonePlanTable. Each entry consists of
configuration information for a specific Tone Plan.

The vismTonePlanTable is of fixed size with a predefined
number of entries, where each entry co…
Indexes
tonePlanIndex
Column Syntax OID
tonePlanIndex
Serves as index to this table. However, the maximum
entry allowed is specify in tonePlanCurrentSize.
Integer32
Constraints:
range: 1-1000
 .1.3.6.1.4.1.351.150.24.1.1.2.1.1.1
tonePlanEntryStatus
This attribute specifies the status of this entry as to
whether this entry (row) contains usable Tone Plan
configuration information (object is set to 'configured'),
or if it is empty (object is set to 'unused'), or i…
Enumerationr/w
Enumerated Values:
1unused
2configured
3reloading
4lostFile
 .1.3.6.1.4.1.351.150.24.1.1.2.1.1.2
tonePlanProvisionFlag
This attribute specifies whether this entry contains
predefined Tone Plan configuration information from
internal firmware code (object is set to 'builtIn') or
if it has been configured with tone plan configuration
info…
Enumeration
Enumerated Values:
1builtIn
2provisionable
 .1.3.6.1.4.1.351.150.24.1.1.2.1.1.3
tonePlanRegionName
The region (or country) for which this tone plan is
defined. Any other entry in this table may have an
identical name, but the combination of tonePlanRegionName
and tonePlanVersionNumber must be unique.

T…
OctetStringr/w
Constraints:
range: 1-64
 .1.3.6.1.4.1.351.150.24.1.1.2.1.1.4
tonePlanVersionNumber
This attribute specifies this entry's version number
for a tone plan for a region. Multiple tone plans may
be defined for each region, but each of these tone
plans must have a unique tonePlanRegionName and
tonePlanVers…
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.351.150.24.1.1.2.1.1.5
tonePlanFileName
This is the name of a valid file stored on the TFTP
server which contains the tone definitions. A missing
or invalid file name will cause a failure in the
configuration of this entry.

If this entry point…
OctetStringr/w
Constraints:
range: 1-32
 .1.3.6.1.4.1.351.150.24.1.1.2.1.1.6

vismConfigToneDetectTable

table
.1.3.6.1.4.1.351.150.24.1.1.3.1 · 1 row entry · 15 columns
Open in standard view 
This table contains the list of user configurable dual
frequency tones that can be detected on VISM. The call
agent can request the VISM to detect any of the tones 
defined in this table.
          
Entries to this table can only be added or deleted,
not modified. Individual parameters within a row 
cannot be changed without deleting and re-adding
the entry.
vismConfigToneDetectEntry entry .1.3.6.1.4.1.351.150.24.1.1.3.1.1
This is the primary entry in the vismConfigToneDetectTable.
Each entry references a User configurable dual
frequency tones that can be detected on VISM.
Indexes
vismConfigToneDetectNum
Column Syntax OID
vismConfigToneDetectNum
This is the index of this table. Currently only
tones 1 to 10 are used and call agent can request up to
ten tones to be detected on different endpoints at
any point in time.
Integer32
Constraints:
range: 1-10
 .1.3.6.1.4.1.351.150.24.1.1.3.1.1.1
vismEventCode
This is the secondary index of this table. Call agent can
request supervision tone detection indexed by this field.
The values of event code are mapped from the subscriber
line event codes defined in RFC2833. Currently…
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.351.150.24.1.1.3.1.1.2
vismConfigToneDetectRowStatus
Controls the creation and deletion of a Config Tone.

An entry may be created using the 'createAndGo' option.
When the row is successfully created, the
vismConfigToneDetectRowStatus would be set to 'activ…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.351.150.24.1.1.3.1.1.3
vismFreqMaxDeviation
Specifies the maximum frequency deviation to be
used by VISM when detecting a specific dual
frequency tone.

Please refer the VISM configuration guide for standard
values to be used for this field.
HzInteger32r/w
Constraints:
range: 10-125
 .1.3.6.1.4.1.351.150.24.1.1.3.1.1.4
vismFreqMaxPower
Specifies the maximum frequency power to be
used by VISM when detecting a specific dual
frequency tone.

Please refer the VISM configuration guide for standard
values to be used for this field.
dBInteger32r/w
Constraints:
range: 0-30
 .1.3.6.1.4.1.351.150.24.1.1.3.1.1.5
vismFreqMinPower
Specifies the minimum frequency power to be
used by VISM when detecting a specific dual
frequency tone.

Please refer the VISM configuration guide for standard
values to be used for this field.
dBInteger32r/w
Constraints:
range: 10-35
 .1.3.6.1.4.1.351.150.24.1.1.3.1.1.6
vismFreqPowerTwist
Specifies the maximum frequency power twist permitted
between the two frequencies used by VISM when
detecting a dual frequency tone.

Please refer the VISM configuration guide for standard
values to be u…
dBInteger32r/w
Constraints:
range: 0-15
 .1.3.6.1.4.1.351.150.24.1.1.3.1.1.7
vismFreqMaxDelay
Specifies the maximum frequency delay to be
used by VISM when detecting a dual frequency tone.

Please refer the VISM configuration guide for standard
values to be used for this field.

It i…
millisecondsInteger32r/w
Constraints:
range: 0-100
 .1.3.6.1.4.1.351.150.24.1.1.3.1.1.8
vismMinOnCadence
Specifies the minimum tone cycle ON time that is
necessary for the VISM to detect the dual frequency
tone. The vismMinOnCadence has to be less than
vismFreqOnCadence value.

Please refer the VISM configur…
millisecondsInteger32r/w
Constraints:
range: 3-100
 .1.3.6.1.4.1.351.150.24.1.1.3.1.1.9
vismMaxOffCadence
Specifies the maximum tone cycle OFF time that
is necessary for the VISM to detect the dual
frequency tone. The vismMaxOffCadence should be
greater than vismFreqOffCadence value.

Please refer the VISM …
Integer32r/w
Constraints:
range: 5-5000
 .1.3.6.1.4.1.351.150.24.1.1.3.1.1.10
vismFreqNumOfCadenceMatch
Specifies the number of pairs of the dual frequency that
needs to be detected. Currently ten pairs of frequency can
be detected by the DSP.
Integer32r/w
Constraints:
range: 0-6
 .1.3.6.1.4.1.351.150.24.1.1.3.1.1.11
vismFrequency1
Specifies the 1st frequency component of the dual
frequency to be detected by the VISM.
HzInteger32r/w
Constraints:
range: 280-3800
 .1.3.6.1.4.1.351.150.24.1.1.3.1.1.12
vismFrequency2
Specifies the 2nd frequency component of the dual
frequency to be detected by the DSP. A value of 0
means this is a single frequency. The range of
1 to 279 is not a valid range in the DSP.
HzInteger32r/w
Constraints:
range: 0-3800
 .1.3.6.1.4.1.351.150.24.1.1.3.1.1.13
vismFreqOnCadence
The On time in each cycle of the dual frequency
to be detected by the DSP. The vismFreqOnCadence
has to be less than vismMinOnCadence value.

It is measured in units of 10ms.
millisecondsInteger32r/w
Constraints:
range: 3-5000
 .1.3.6.1.4.1.351.150.24.1.1.3.1.1.14
vismFreqOffCadence
The Off time in each cycle of the dual frequency
to be detected by the DSP. The vismFreqOffCadence
should be lesser than the vismMaxOffCadence value.

It is measured in units of 10ms.
millisecondsInteger32r/w
Constraints:
range: 5-5000
 .1.3.6.1.4.1.351.150.24.1.1.3.1.1.15