vismConfigToneDetectNum

CISCO-WAN-VISM-TONE-PLAN-MIB · .1.3.6.1.4.1.351.150.24.1.1.3.1.1.1

MIB view Table view

Object

column Integer32

This is the index of this table. Currently only 
tones 1 to 10 are used and call agent can request up to
ten tones to be detected on different endpoints at 
any point in time.

Context

MIB: CISCO-WAN-VISM-TONE-PLAN-MIB
OID: .1.3.6.1.4.1.351.150.24.1.1.3.1.1.1
Type: column
Access: readonly
Status: current
Parent: vismConfigToneDetectEntry
Table: vismConfigToneDetectTable
Siblings: 14

Syntax

Integer32

Values & Constraints

Object Constraints

range: 1-10

Related Objects

Sibling Objects

Object	Type	Syntax	OID
vismMaxOffCadence Specifies the maximum tone cycle OFF time that is necessary for the VISM to detect the dual frequency tone. The vismMaxOffCadence should be greater than vismFreqOffCadence valu…	column	Integer32	`.1.3.6.1.4.1.351.150.24.1.1.3.1.1.10`
vismFreqNumOfCadenceMatch Specifies the number of pairs of the dual frequency that needs to be detected. Currently ten pairs of frequency can be detected by the DSP.	column	Integer32	`.1.3.6.1.4.1.351.150.24.1.1.3.1.1.11`
vismFrequency1 Specifies the 1st frequency component of the dual frequency to be detected by the VISM.	column	Hz Integer32	`.1.3.6.1.4.1.351.150.24.1.1.3.1.1.12`
vismFrequency2 Specifies the 2nd frequency component of the dual frequency to be detected by the DSP. A value of 0 means this is a single frequency. The range of 1 to 279 is not a valid range…	column	Hz Integer32	`.1.3.6.1.4.1.351.150.24.1.1.3.1.1.13`
vismFreqOnCadence The On time in each cycle of the dual frequency to be detected by the DSP. The vismFreqOnCadence has to be less than vismMinOnCadence value. It is measured in unit…	column	milliseconds Integer32	`.1.3.6.1.4.1.351.150.24.1.1.3.1.1.14`
vismFreqOffCadence The Off time in each cycle of the dual frequency to be detected by the DSP. The vismFreqOffCadence should be lesser than the vismMaxOffCadence value. It is measured…	column	milliseconds Integer32	`.1.3.6.1.4.1.351.150.24.1.1.3.1.1.15`
vismEventCode This is the secondary index of this table. Call agent can request supervision tone detection indexed by this field. The values of event code are mapped from the subscriber line e…	column	Integer32	`.1.3.6.1.4.1.351.150.24.1.1.3.1.1.2`
vismConfigToneDetectRowStatus Controls the creation and deletion of a Config Tone. An entry may be created using the 'createAndGo' option. When the row is successfully created, the vismConfigTo…	column	SNMPv2-TCRowStatus	`.1.3.6.1.4.1.351.150.24.1.1.3.1.1.3`
vismFreqMaxDeviation Specifies the maximum frequency deviation to be used by VISM when detecting a specific dual frequency tone. Please refer the VISM configuration guide for standard …	column	Hz Integer32	`.1.3.6.1.4.1.351.150.24.1.1.3.1.1.4`
vismFreqMaxPower Specifies the maximum frequency power to be used by VISM when detecting a specific dual frequency tone. Please refer the VISM configuration guide for standard value…	column	dB Integer32	`.1.3.6.1.4.1.351.150.24.1.1.3.1.1.5`
vismFreqMinPower Specifies the minimum frequency power to be used by VISM when detecting a specific dual frequency tone. Please refer the VISM configuration guide for standard valu…	column	dB Integer32	`.1.3.6.1.4.1.351.150.24.1.1.3.1.1.6`
vismFreqPowerTwist Specifies the maximum frequency power twist permitted between the two frequencies used by VISM when detecting a dual frequency tone. Please refer the VISM configu…	column	dB Integer32	`.1.3.6.1.4.1.351.150.24.1.1.3.1.1.7`
vismFreqMaxDelay Specifies the maximum frequency delay to be used by VISM when detecting a dual frequency tone. Please refer the VISM configuration guide for standard values to be u…	column	milliseconds Integer32	`.1.3.6.1.4.1.351.150.24.1.1.3.1.1.8`
vismMinOnCadence Specifies the minimum tone cycle ON time that is necessary for the VISM to detect the dual frequency tone. The vismMinOnCadence has to be less than vismFreqOnCadence value. …	column	milliseconds Integer32	`.1.3.6.1.4.1.351.150.24.1.1.3.1.1.9`