vismConfigToneDetectEntry
CISCO-WAN-VISM-TONE-PLAN-MIB ·
.1.3.6.1.4.1.351.150.24.1.1.3.1.1
Object
row
This is the primary entry in the vismConfigToneDetectTable. Each entry references a User configurable dual frequency tones that can be detected on VISM.
Context
- MIB
- CISCO-WAN-VISM-TONE-PLAN-MIB
- OID
.1.3.6.1.4.1.351.150.24.1.1.3.1.1- Type
- row
- Status
- current
- Parent
- vismConfigToneDetectTable
- Table
- vismConfigToneDetectTable
- Children
- 15
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Child Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| vismConfigToneDetectNum This is the index of this table. Currently only
tones 1 to 10 are used and call agent can request up to
ten tones to be detected on different endpoints at
any point in time. | column | Integer32 | .1.3.6.1.4.1.351.150.24.1.1.3.1.1.1 |
| vismMaxOffCadence Specifies the maximum tone cycle OFF time that
is necessary for the VISM to detect the dual
frequency tone. The vismMaxOffCadence should be
greater than vismFreqOffCadence valu… | column | Integer32 | .1.3.6.1.4.1.351.150.24.1.1.3.1.1.10 |
| vismFreqNumOfCadenceMatch Specifies the number of pairs of the dual frequency that
needs to be detected. Currently ten pairs of frequency can
be detected by the DSP. | column | Integer32 | .1.3.6.1.4.1.351.150.24.1.1.3.1.1.11 |
| vismFrequency1 Specifies the 1st frequency component of the dual
frequency to be detected by the VISM. | column | Hz Integer32 | .1.3.6.1.4.1.351.150.24.1.1.3.1.1.12 |
| vismFrequency2 Specifies the 2nd frequency component of the dual
frequency to be detected by the DSP. A value of 0
means this is a single frequency. The range of
1 to 279 is not a valid range… | column | Hz Integer32 | .1.3.6.1.4.1.351.150.24.1.1.3.1.1.13 |
| vismFreqOnCadence The On time in each cycle of the dual frequency
to be detected by the DSP. The vismFreqOnCadence
has to be less than vismMinOnCadence value.
It is measured in unit… | column | milliseconds Integer32 | .1.3.6.1.4.1.351.150.24.1.1.3.1.1.14 |
| vismFreqOffCadence The Off time in each cycle of the dual frequency
to be detected by the DSP. The vismFreqOffCadence
should be lesser than the vismMaxOffCadence value.
It is measured… | column | milliseconds Integer32 | .1.3.6.1.4.1.351.150.24.1.1.3.1.1.15 |
| vismEventCode This is the secondary index of this table. Call agent can
request supervision tone detection indexed by this field.
The values of event code are mapped from the subscriber
line e… | column | Integer32 | .1.3.6.1.4.1.351.150.24.1.1.3.1.1.2 |
| vismConfigToneDetectRowStatus Controls the creation and deletion of a Config Tone.
An entry may be created using the 'createAndGo' option.
When the row is successfully created, the
vismConfigTo… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.351.150.24.1.1.3.1.1.3 |
| vismFreqMaxDeviation Specifies the maximum frequency deviation to be
used by VISM when detecting a specific dual
frequency tone.
Please refer the VISM configuration guide for standard
… | column | Hz Integer32 | .1.3.6.1.4.1.351.150.24.1.1.3.1.1.4 |
| vismFreqMaxPower Specifies the maximum frequency power to be
used by VISM when detecting a specific dual
frequency tone.
Please refer the VISM configuration guide for standard
value… | column | dB Integer32 | .1.3.6.1.4.1.351.150.24.1.1.3.1.1.5 |
| vismFreqMinPower Specifies the minimum frequency power to be
used by VISM when detecting a specific dual
frequency tone.
Please refer the VISM configuration guide for standard
valu… | column | dB Integer32 | .1.3.6.1.4.1.351.150.24.1.1.3.1.1.6 |
| vismFreqPowerTwist Specifies the maximum frequency power twist permitted
between the two frequencies used by VISM when
detecting a dual frequency tone.
Please refer the VISM configu… | column | dB Integer32 | .1.3.6.1.4.1.351.150.24.1.1.3.1.1.7 |
| vismFreqMaxDelay Specifies the maximum frequency delay to be
used by VISM when detecting a dual frequency tone.
Please refer the VISM configuration guide for standard
values to be u… | column | milliseconds Integer32 | .1.3.6.1.4.1.351.150.24.1.1.3.1.1.8 |
| vismMinOnCadence Specifies the minimum tone cycle ON time that is
necessary for the VISM to detect the dual frequency
tone. The vismMinOnCadence has to be less than
vismFreqOnCadence value.
… | column | milliseconds Integer32 | .1.3.6.1.4.1.351.150.24.1.1.3.1.1.9 |
Indexes
| Object | Type | Syntax | OID |
|---|---|---|---|
| vismConfigToneDetectNum This is the index of this table. Currently only
tones 1 to 10 are used and call agent can request up to
ten tones to be detected on different endpoints at
any point in time. | column | Integer32 | .1.3.6.1.4.1.351.150.24.1.1.3.1.1.1 |