CISCO-WAN-FR-SIGNALING-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
4
Rows
4
Columns
33

frPortCnfSigLMIGrpTable

table
.1.3.6.1.4.1.351.110.5.1.1.1.2.1.1 · 1 row entry · 11 columns
Open in standard view 
This table is for configuration of
singaling(LMI) on  frame relay ports.
frPortCnfSigLMIGrpEntry entry .1.3.6.1.4.1.351.110.5.1.1.1.2.1.1.1
An entry for each frame relay port. The entries
are applicable only for following ports:
portType = frame-relay(1),
portType = frFUNI(2).
This table is not applicable for Frame Forwarding
ports,i.e portType = fram…
Indexes
lmiCnfPortNum
Column Syntax OID
lmiCnfPortNum
The value of this object identifies the frame
relay port. The value of this object must be
same as the value of 'portNum' from frPortCnfPortGrpTable.

The Frame Forwarding Port value is not valid for
thi…
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.351.110.5.1.1.1.2.1.1.1.1
signallingProtocolType
The value of this object is used for configuring
the LMI signaling protocol type.
1 - other. Not a valid value for SET request.
2 - noSignalling
3 - strataLMI
4 - annexAUNI
5 - a…
Enumerationr/w
Enumerated Values:
1other
2noSignalling
3strataLMI
4annexAUNI
5annexDUNI
6annexANNI
7annexDNNI
 .1.3.6.1.4.1.351.110.5.1.1.1.2.1.1.1.2
asynchronousUpdates
This object is used for configuring asynchronous
updates.

The possible values are :

disable(1) : disable Asynchronous Status Updates
& Unsolicited Full Status
en…
Enumerationr/w
Enumerated Values:
1disable
2enable
3fsenable
4updfsenable
 .1.3.6.1.4.1.351.110.5.1.1.1.2.1.1.1.3
t391LinkIntegrityTimer
The value of this object identifies the desired
User-side T391 link integrity verification polling
timer value for this UNI/NNI logical port.
secondsInteger32r/w
Constraints:
range: 5-30
 .1.3.6.1.4.1.351.110.5.1.1.1.2.1.1.1.4
t392PollingVerificationTimer
The value of this object identifies the desired
Network-side T392 polling verification timer value
(nT2 for LMI) for this UNI/NNI logical port.
This is the length of time the network should
wait between Status Inquiry …
secondsInteger32r/w
Constraints:
range: 5-30
 .1.3.6.1.4.1.351.110.5.1.1.1.2.1.1.1.5
n391FullStatusPollingCounter
The value of this object identifies the
User-Side 391 full status polling cycle value
for this UNI/NNI logical port.
PollsInteger32r/w
Constraints:
range: 1-255
 .1.3.6.1.4.1.351.110.5.1.1.1.2.1.1.1.6
n392ErrorThreshold
The value of this object identifies the desired
User-side/Network-side N392 error threshold value for this
UNI/NNI logical port.
Integer32r/w
Constraints:
range: 1-10
 .1.3.6.1.4.1.351.110.5.1.1.1.2.1.1.1.7
n393MonitoredEventCount
The value of this object identifies the desired
User-side/Network-side N393 monitored events count
value for this UNI/NNI logical port.
EventsInteger32r/w
Constraints:
range: 1-10
 .1.3.6.1.4.1.351.110.5.1.1.1.2.1.1.1.8
enhancedLmi
This object enables/disables the Enhanced LMI
(ELMI) on the frame relay port.
Enumerationr/w
Enumerated Values:
1disable
2enable
 .1.3.6.1.4.1.351.110.5.1.1.1.2.1.1.1.9
portFRF1Dot2Support
This object enables/disables the FRF 1.2 feature.
This object is added for FRSM12.

This object is not applicable to MGX Release 1.x
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.351.110.5.1.1.1.2.1.1.1.10
portLmiSigConfMethod
This object enables/disables the port LMI signalling autosense.

Setting this object to autosense(2) enables the port to
autodetect and configure port LMI signalling type.

signallingProtocol…
Enumerationr/w
Enumerated Values:
1manual
2autosense
 .1.3.6.1.4.1.351.110.5.1.1.1.2.1.1.1.11

frPortCnfSigCLLMGrpTable

table
.1.3.6.1.4.1.351.110.5.1.1.1.2.2.1 · 1 row entry · 4 columns
Open in standard view 
This table is configuring the CLLM on
frame relay ports. This table is not 
applicable for Frame Forwarding ports.
frPortCnfSigCLLMGrpEntry entry .1.3.6.1.4.1.351.110.5.1.1.1.2.2.1.1
An entry for each frame relay port. The entries
are applicable only for following ports:
portType = frame-relay(1),
portType = frFUNI(2).
This table is not applicable for Frame Forwarding
ports,i.e portType = fram…
Indexes
cllmCnfPortNum
Column Syntax OID
cllmCnfPortNum
The value of this object identifies the frame
relay port. The value of this object must be
same as the value of 'portNum' from frPortCnfPortGrpTable.

The Frame Forwarding Port value is not valid for
this…
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.351.110.5.1.1.1.2.2.1.1.1
cllmEnable
This object is used for enabling/disabling
CLLM on frame relay port.
When set to 'disabled', CLLM is disabled.
When set to 'enabled', CLLM is enabled.
Enumerationr/w
Enumerated Values:
1disable
2enable
 .1.3.6.1.4.1.351.110.5.1.1.1.2.2.1.1.2
xmtCLLMStatusTimer
Interval in milliseconds for CLLM to send CLLM updates.
milli-secondsInteger32r/w
Constraints:
range: 40-5000
 .1.3.6.1.4.1.351.110.5.1.1.1.2.2.1.1.3
rcvCLLMStatusTimer
Timeout value for receiving CLLM updates.
Enumeration
Enumerated Values:
1000rcvCLLMTimerValue
 .1.3.6.1.4.1.351.110.5.1.1.1.2.2.1.1.4

frPortCntSigLMIGrpTable

table
.1.3.6.1.4.1.351.110.5.1.1.2.2.1.1 · 1 row entry · 12 columns
Open in standard view 
This table contains the LMI statistics 
of frame relay ports.
frPortCntSigLMIGrpEntry entry .1.3.6.1.4.1.351.110.5.1.1.2.2.1.1.1
An entry for each frame relay port.
Each entry identifies the LMI statistics supported
on a frame relay port.
The entries are applicable only for following ports:
portType = frame-relay(1),
portType = frFUNI(2).
T…
Indexes
lmiSigPortNum
Column Syntax OID
lmiSigPortNum
The value of this object refers to
the frame relay port. The value for
this object must be same as the 'portNum'
object defined in frPortCnfPortGrpTable.

The frame forwarding port value is not valid
for t…
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.351.110.5.1.1.2.2.1.1.1.1
rcvStatusInquiry
The number of Status Inquiry messages received.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.351.110.5.1.1.2.2.1.1.1.2
rcvInvalidRequest
The number of Invalid Request messages received.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.351.110.5.1.1.2.2.1.1.1.3
rcvUNISeqMismatch
The number of times UNI messages
with sequence number mismatches were received.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.351.110.5.1.1.2.2.1.1.1.4
xmtStatus
The number of times Status response messages
transmitted.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.351.110.5.1.1.2.2.1.1.1.5
xmtAsynchUpdate
The number of times Asynch Status messages
transmitted.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.351.110.5.1.1.2.2.1.1.1.6
uniSignalingTimeout
The number of times UNI Status requests
were not received.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.351.110.5.1.1.2.2.1.1.1.7
xmtStatusInquiry
The number of Status Inquiry messages transmitted.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.351.110.5.1.1.2.2.1.1.1.8
rcvStatus
The number of times Status response messages received.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.351.110.5.1.1.2.2.1.1.1.9
rcvAsynchUpdate
The number of times Asynch Status messages received
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.351.110.5.1.1.2.2.1.1.1.10
rcvNNISeqMismatch
The number of times NNI messages
with sequence number mismatches were received.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.351.110.5.1.1.2.2.1.1.1.11
nniSignalingTimeout
The number of times NNI Status requests were
not received.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.351.110.5.1.1.2.2.1.1.1.12

frPortCntSigCLLMGrpTable

table
.1.3.6.1.4.1.351.110.5.1.1.2.2.2.1 · 1 row entry · 6 columns
Open in standard view 
This table is for CLLM statistics for
frame relay ports.
frPortCntSigCLLMGrpEntry entry .1.3.6.1.4.1.351.110.5.1.1.2.2.2.1.1
An entry for frame relay port.
The entries are applicable only for following ports:
portType = frame-relay(1),
portType = frFUNI(2).
This table is not applicable for Frame Forwarding
ports,i.e portType = frame-for…
Indexes
cllmSigPortNum
Column Syntax OID
cllmSigPortNum
The value of this object identifies the frame
relay port. The value of this object must be
same as the value of 'portNum' from frPortCnfPortGrpTable.

The Frame Forwarding Port value is not valid for
this…
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.351.110.5.1.1.2.2.2.1.1.1
rcvFramesCLLM
The number of CLLM frames received.
framesSNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.351.110.5.1.1.2.2.2.1.1.2
rcvBytesCLLM
The number of CLLM bytes received.
bytesSNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.351.110.5.1.1.2.2.2.1.1.3
xmtFramesCLLM
The number of CLLM frames transmitted.
framesSNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.351.110.5.1.1.2.2.2.1.1.4
xmtBytesCLLM
The number of CLLM bytes transmitted.
bytesSNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.351.110.5.1.1.2.2.2.1.1.5
cllmFailures
The number of times an expected CLLM
message was not received.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.351.110.5.1.1.2.2.2.1.1.6