asynchronousUpdates
CISCO-WAN-FR-SIGNALING-MIB ·
.1.3.6.1.4.1.351.110.5.1.1.1.2.1.1.1.3
Object
column
r/w
Enumeration
This object is used for configuring asynchronous
updates.
The possible values are :
disable(1) : disable Asynchronous Status Updates
& Unsolicited Full Status
enable(2) : enable Asynchronous Status Updates
fsenable(3) : enable Unsolicited Full Status
updfsenable(4) : enable Asynchronous Status Updates &
Unsolicited Full Status.
Context
- MIB
- CISCO-WAN-FR-SIGNALING-MIB
- OID
.1.3.6.1.4.1.351.110.5.1.1.1.2.1.1.1.3- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- frPortCnfSigLMIGrpEntry
- Table
- frPortCnfSigLMIGrpTable
- Siblings
- 10
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | disable |
2 | enable |
3 | fsenable |
4 | updfsenable |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| lmiCnfPortNum The value of this object identifies the frame
relay port. The value of this object must be
same as the value of 'portNum' from frPortCnfPortGrpTable.
The Frame For… | column | Integer32 | .1.3.6.1.4.1.351.110.5.1.1.1.2.1.1.1.1 |
| portFRF1Dot2Support This object enables/disables the FRF 1.2 feature.
This object is added for FRSM12.
This object is not applicable to MGX Release 1.x | column | Enumeration | .1.3.6.1.4.1.351.110.5.1.1.1.2.1.1.1.10 |
| portLmiSigConfMethod This object enables/disables the port LMI signalling autosense.
Setting this object to autosense(2) enables the port to
autodetect and configure port LMI signalling… | column | Enumeration | .1.3.6.1.4.1.351.110.5.1.1.1.2.1.1.1.11 |
| signallingProtocolType The value of this object is used for configuring
the LMI signaling protocol type.
1 - other. Not a valid value for SET request.
2 - noSignalling
3 - strat… | column | Enumeration | .1.3.6.1.4.1.351.110.5.1.1.1.2.1.1.1.2 |
| t391LinkIntegrityTimer The value of this object identifies the desired
User-side T391 link integrity verification polling
timer value for this UNI/NNI logical port. | column | seconds Integer32 | .1.3.6.1.4.1.351.110.5.1.1.1.2.1.1.1.4 |
| t392PollingVerificationTimer The value of this object identifies the desired
Network-side T392 polling verification timer value
(nT2 for LMI) for this UNI/NNI logical port.
This is the length of time the netw… | column | seconds Integer32 | .1.3.6.1.4.1.351.110.5.1.1.1.2.1.1.1.5 |
| n391FullStatusPollingCounter The value of this object identifies the
User-Side 391 full status polling cycle value
for this UNI/NNI logical port. | column | Polls Integer32 | .1.3.6.1.4.1.351.110.5.1.1.1.2.1.1.1.6 |
| n392ErrorThreshold The value of this object identifies the desired
User-side/Network-side N392 error threshold value for this
UNI/NNI logical port. | column | Integer32 | .1.3.6.1.4.1.351.110.5.1.1.1.2.1.1.1.7 |
| n393MonitoredEventCount The value of this object identifies the desired
User-side/Network-side N393 monitored events count
value for this UNI/NNI logical port. | column | Events Integer32 | .1.3.6.1.4.1.351.110.5.1.1.1.2.1.1.1.8 |
| enhancedLmi This object enables/disables the Enhanced LMI
(ELMI) on the frame relay port. | column | Enumeration | .1.3.6.1.4.1.351.110.5.1.1.1.2.1.1.1.9 |