portLmiSigConfMethod
CISCO-WAN-FR-SIGNALING-MIB ·
.1.3.6.1.4.1.351.110.5.1.1.1.2.1.1.1.11
Object
column
r/w
Enumeration
This object enables/disables the port LMI signalling autosense.
Setting this object to autosense(2) enables the port to
autodetect and configure port LMI signalling type.
signallingProtocolType mib should be set to noSignalling
while this object is being set to autosense(2). If
signallingProtocolType mib is set to a value other than
noSignalling while this object is being set to autosense(2),
the set request fails.
When this object is set to manual(1), user needs to manually
configure the port LMI signalling type using the
signallingProtocolType mib. signallingProtocolType can be
configured to any valid value including noSignalling when
this object is set to manual(1).
Context
- MIB
- CISCO-WAN-FR-SIGNALING-MIB
- OID
.1.3.6.1.4.1.351.110.5.1.1.1.2.1.1.1.11- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- frPortCnfSigLMIGrpEntry
- Table
- frPortCnfSigLMIGrpTable
- Siblings
- 10
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | manual |
2 | autosense |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| lmiCnfPortNum The value of this object identifies the frame
relay port. The value of this object must be
same as the value of 'portNum' from frPortCnfPortGrpTable.
The Frame For… | column | Integer32 | .1.3.6.1.4.1.351.110.5.1.1.1.2.1.1.1.1 |
| portFRF1Dot2Support This object enables/disables the FRF 1.2 feature.
This object is added for FRSM12.
This object is not applicable to MGX Release 1.x | column | Enumeration | .1.3.6.1.4.1.351.110.5.1.1.1.2.1.1.1.10 |
| signallingProtocolType The value of this object is used for configuring
the LMI signaling protocol type.
1 - other. Not a valid value for SET request.
2 - noSignalling
3 - strat… | column | Enumeration | .1.3.6.1.4.1.351.110.5.1.1.1.2.1.1.1.2 |
| asynchronousUpdates This object is used for configuring asynchronous
updates.
The possible values are :
disable(1) : disable Asynchronous Status Updates
… | column | Enumeration | .1.3.6.1.4.1.351.110.5.1.1.1.2.1.1.1.3 |
| t391LinkIntegrityTimer The value of this object identifies the desired
User-side T391 link integrity verification polling
timer value for this UNI/NNI logical port. | column | seconds Integer32 | .1.3.6.1.4.1.351.110.5.1.1.1.2.1.1.1.4 |
| t392PollingVerificationTimer The value of this object identifies the desired
Network-side T392 polling verification timer value
(nT2 for LMI) for this UNI/NNI logical port.
This is the length of time the netw… | column | seconds Integer32 | .1.3.6.1.4.1.351.110.5.1.1.1.2.1.1.1.5 |
| n391FullStatusPollingCounter The value of this object identifies the
User-Side 391 full status polling cycle value
for this UNI/NNI logical port. | column | Polls Integer32 | .1.3.6.1.4.1.351.110.5.1.1.1.2.1.1.1.6 |
| n392ErrorThreshold The value of this object identifies the desired
User-side/Network-side N392 error threshold value for this
UNI/NNI logical port. | column | Integer32 | .1.3.6.1.4.1.351.110.5.1.1.1.2.1.1.1.7 |
| n393MonitoredEventCount The value of this object identifies the desired
User-side/Network-side N393 monitored events count
value for this UNI/NNI logical port. | column | Events Integer32 | .1.3.6.1.4.1.351.110.5.1.1.1.2.1.1.1.8 |
| enhancedLmi This object enables/disables the Enhanced LMI
(ELMI) on the frame relay port. | column | Enumeration | .1.3.6.1.4.1.351.110.5.1.1.1.2.1.1.1.9 |