CISCO-STACKWISE-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
6
Rows
6
Columns
36

cswSwitchInfoTable

table
.1.3.6.1.4.1.9.9.500.1.2.1 · 1 row entry · 14 columns
Open in standard view 
This table contains information specific to switches in a
stack.  Every switch with an entry in the entPhysicalTable
(ENTITY-MIB) whose entPhysicalClass is 'chassis' will have
an entry in this table.
cswSwitchInfoEntry entry .1.3.6.1.4.1.9.9.500.1.2.1.1
A conceptual row in the cswSwitchInfoTable describing
a switch information.
Indexes
ENTITY-MIBentPhysicalIndex
Column Syntax OID
cswSwitchNumCurrent
This object contains the current switch identification number.
This number should match any logical labeling on the switch.
For example, a switch whose interfaces are labeled
'interface #3' this value should be 3.
CswSwitchNumber
Textual Convention: CswSwitchNumber Unsigned32
Type Constraints:
range: 1..4294967295
 .1.3.6.1.4.1.9.9.500.1.2.1.1.1
cswSwitchNumNextReload
This object contains the cswSwitchNumCurrent to be
used at next reload. The maximum value for this object is
defined by the cswMaxSwitchNum object.

Note: This object will contain 0 and cannot be set if t…
CswSwitchNumberOrZeror/w
Textual Convention: CswSwitchNumberOrZero Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.500.1.2.1.1.2
cswSwitchRole
This object describes the function of the switch:

master - stack master.

member - active member of the stack.

notMember - none-active stack member, see
cswS…
Enumeration
Enumerated Values:
1master
2member
3notMember
4standby
 .1.3.6.1.4.1.9.9.500.1.2.1.1.3
cswSwitchSwPriority
A number containing the priority of a switch. The switch with
the highest priority will become the master. The maximum value
for this object is defined by the cswMaxSwitchConfigPriority
object.

If after…
CswSwitchPriorityr/w
Textual Convention: CswSwitchPriority Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.500.1.2.1.1.4
cswSwitchHwPriority
This object contains the hardware priority of a switch. If
two or more entries in this table have the same
cswSwitchSwPriority value during the master election time,
the switch with the highest cswSwitchHwPriority will…
CswSwitchPriority
Textual Convention: CswSwitchPriority Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.500.1.2.1.1.5
cswSwitchState
The current state of a switch:

waiting - Waiting for a limited time on other
switches in the stack to come online.

progressing - Master election or mismatch ch…
Enumeration
Enumerated Values:
1waiting
2progressing
3added
4ready
5sdmMismatch
6verMismatch
7featureMismatch
8newMasterInit
9provisioned
10invalid
11removed
 .1.3.6.1.4.1.9.9.500.1.2.1.1.6
cswSwitchMacAddress
The MAC address of the switch.

Note: This object will contain the value of 0000:0000:0000
if the cswSwitchState value is other than 'ready'.
SNMPv2-TCMacAddress
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.9.9.500.1.2.1.1.7
cswSwitchSoftwareImage
The software image type running on the switch.

Note: This object will contain an empty string if the
cswSwitchState value is other than 'ready'.
SNMP-FRAMEWORK-MIBSnmpAdminString
Textual Convention: SNMP-FRAMEWORK-MIBSnmpAdminString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.9.500.1.2.1.1.8
cswSwitchPowerBudget
This object indicates the power budget of the switch.
WattsSNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.500.1.2.1.1.9
cswSwitchPowerCommited
This object indicates the power committed to the POE devices
connected to the switch.
WattsSNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.500.1.2.1.1.10
cswSwitchSystemPowerPriority
This specifies the system's power priority. In case of
a power failure then the system with the highest system
priority will be brought down last.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.500.1.2.1.1.11
cswSwitchPoeDevicesLowPriority
This object specifies the priority of the system's low
priority POE devices.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.500.1.2.1.1.12
cswSwitchPoeDevicesHighPriority
This object specifies the priority of the system's high
priority POE devices. In order to avoid losing the high
priority POE devices before the low priority POE devices,
this object's value must be greater than value …
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.500.1.2.1.1.13
cswSwitchPowerAllocated
This object indicates the power committed to the POE devices
connected to the switch.
WattsSNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.500.1.2.1.1.14

cswStackPortInfoTable

table
.1.3.6.1.4.1.9.9.500.1.2.2 · 1 row entry · 2 columns
Open in standard view 
This table contains stackport specific information.  There
exists an entry in this table for every physical stack
port that have an entry in the ifTable (IF-MIB).
cswStackPortInfoEntry entry .1.3.6.1.4.1.9.9.500.1.2.2.1
A conceptual row in the cswStackPortInfoTable. An entry
contains information about a stackport.
Indexes
IF-MIBifIndex
Column Syntax OID
cswStackPortOperStatus
The state of the stackport.

up - Connected and operational.

down - Not connected to a neighboring switch or
administrative down.

forcedDown - Shut …
Enumeration
Enumerated Values:
1up
2down
3forcedDown
 .1.3.6.1.4.1.9.9.500.1.2.2.1.1
cswStackPortNeighbor
This object contains the value of the entPhysicalIndex of the
switch's chassis to which this stackport is connected to. If
the stackport is not connected, the value 0 is returned.
CISCO-TCEntPhysicalIndexOrZero
Textual Convention: CISCO-TCEntPhysicalIndexOrZero Integer32
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.9.9.500.1.2.2.1.2

cswDistrStackLinkInfoTable

table
.1.3.6.1.4.1.9.9.500.1.2.3 · 1 row entry · 2 columns
Open in standard view 
Distributed Stack Link Information.
cswDistrStackLinkInfoEntry entry .1.3.6.1.4.1.9.9.500.1.2.3.1
An Entry containing information about DSL link.
Indexes
ENTITY-MIBentPhysicalIndex cswDSLindex
Column Syntax OID
cswDSLindex
This is index of the distributed stack link
with respect to each interface port
Unsigned32
Constraints:
range: 1-2
 .1.3.6.1.4.1.9.9.500.1.2.3.1.1
cswDistrStackLinkBundleOperStatus
The state of the stackLink.
up - Connected and operational.
down - Not connected or administrative down.
Enumeration
Enumerated Values:
1up
2down
 .1.3.6.1.4.1.9.9.500.1.2.3.1.2

cswDistrStackPhyPortInfoTable

table
.1.3.6.1.4.1.9.9.500.1.2.4 · 1 row entry · 4 columns
Open in standard view 
This table contains  objects for Distributed stack
Link information Table.
cswDistrStackPhyPortInfoEntry entry .1.3.6.1.4.1.9.9.500.1.2.4.1
An Entry containing information about stack port that
is part of Distributed Stack Link.
Indexes
ENTITY-MIBentPhysicalIndex cswDSLindex IF-MIBifIndex
Column Syntax OID
cswDistrStackPhyPort
This object indicates the name of distributed stack port.
SNMP-FRAMEWORK-MIBSnmpAdminString
Textual Convention: SNMP-FRAMEWORK-MIBSnmpAdminString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.9.500.1.2.4.1.1
cswDistrStackPhyPortOperStatus
The state of the distributed stackport.
up - Connected and operational.
down - Not connected to a neighboring switch or
administrative down.
Enumeration
Enumerated Values:
1up
2down
 .1.3.6.1.4.1.9.9.500.1.2.4.1.2
cswDistrStackPhyPortNbr
This object indicates the name of
distributed stack port's neighbor.
SNMP-FRAMEWORK-MIBSnmpAdminString
Textual Convention: SNMP-FRAMEWORK-MIBSnmpAdminString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.9.500.1.2.4.1.3
cswDistrStackPhyPortNbrsw
This object indicates the EntPhysicalIndex of
the distributed stack port's neigbor switch.
CISCO-TCEntPhysicalIndexOrZero
Textual Convention: CISCO-TCEntPhysicalIndexOrZero Integer32
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.9.9.500.1.2.4.1.4

cswStackPowerInfoTable

table
.1.3.6.1.4.1.9.9.500.1.3.1 · 1 row entry · 7 columns
Open in standard view 
This table holds the information about all the power stacks in
a single data stack.
cswStackPowerInfoEntry entry .1.3.6.1.4.1.9.9.500.1.3.1.1
An entry in the cswStackPowerInfoTable for each of the power
stacks in a single data stack. This entry contains information
regarding the power stack.
Indexes
cswStackPowerStackNumber
Column Syntax OID
cswStackPowerStackNumber
A unique value, greater than zero, to identify a power stack.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.500.1.3.1.1.1
cswStackPowerMode
This object specifies the information about the mode of the
power stack.
Power-sharing mode: All of the input power can be used for
loads, and the total available power appears as one huge power
supply. The power budge…
CswPowerStackModer/w
Textual Convention: CswPowerStackMode Enumeration
Type Values:
1powerSharing
2redundant
3powerSharingStrict
4redundantStrict
 .1.3.6.1.4.1.9.9.500.1.3.1.1.2
cswStackPowerMasterMacAddress
This object indicates the Mac address of the power stack
master.
SNMPv2-TCMacAddress
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.9.9.500.1.3.1.1.3
cswStackPowerMasterSwitchNum
This object indicates the switch number of the power stack
master.
The value of this object would be zero if the power stack
master is not part of this data stack.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.500.1.3.1.1.4
cswStackPowerNumMembers
This object indicates the number of members in the power
stack.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.500.1.3.1.1.5
cswStackPowerType
This object indicates the topology of the power stack, that is,
whether the switch is running in RING or STAR topology.
CswPowerStackType
Textual Convention: CswPowerStackType Enumeration
Type Values:
1ring
2star
 .1.3.6.1.4.1.9.9.500.1.3.1.1.6
cswStackPowerName
This object specifies a unique name of this power stack. A
zero-length string indicates no name is assigned.
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Textual Convention: SNMP-FRAMEWORK-MIBSnmpAdminString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.9.500.1.3.1.1.7

cswStackPowerPortInfoTable

table
.1.3.6.1.4.1.9.9.500.1.3.2 · 1 row entry · 7 columns
Open in standard view 
This table contains information about the stack power ports.
There exists an entry in this table for each physical stack
power port.
cswStackPowerPortInfoEntry entry .1.3.6.1.4.1.9.9.500.1.3.2.1
A conceptual row in the cswStackPowerPortInfoTable. This entry
contains information about a power stack port.
Indexes
ENTITY-MIBentPhysicalIndex cswStackPowerPortIndex
Column Syntax OID
cswStackPowerPortIndex
A unique value, greater than zero, for each stack power port.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.500.1.3.2.1.1
cswStackPowerPortOperStatus
This object is used to either set or unset the operational
status of the stack port. This object will have following valid
values,

enabled(1) : The port is enabled
disabled(2) : The port is force…
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.9.9.500.1.3.2.1.2
cswStackPowerPortNeighborMacAddress
This objects indicates the port neighbor's Mac Address.
SNMPv2-TCMacAddress
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.9.9.500.1.3.2.1.3
cswStackPowerPortNeighborSwitchNum
This objects indicates the port neighbor's switch number. If
either there is no switch connected or the neighbor is not
Jack-Jack then the value of this object is going to be 0.
CswSwitchNumberOrZero
Textual Convention: CswSwitchNumberOrZero Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.500.1.3.2.1.4
cswStackPowerPortLinkStatus
This object is used to describe the link status of the stack
port. This object will have following valid
values,

up(1) : The port is connected and operational
down(2): The port is either forced d…
Enumeration
Enumerated Values:
1up
2down
 .1.3.6.1.4.1.9.9.500.1.3.2.1.5
cswStackPowerPortOverCurrentThreshold
This object is used to retrieve the over current threshold. The
stack power cables are limited to carry current up to the limit
retrieved by this object. The stack power cables would not be
able to function properly if …
AmperesSNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.500.1.3.2.1.6
cswStackPowerPortName
This object specifies a unique name of the stack power port as
shown on the face plate of the system. A zero-length string
indicates no name is assigned.
SNMP-FRAMEWORK-MIBSnmpAdminString
Textual Convention: SNMP-FRAMEWORK-MIBSnmpAdminString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.9.500.1.3.2.1.7