cswSwitchState – CISCO-STACKWISE-MIB

Object

column Enumeration

The current state of a switch:
              
waiting         - Waiting for a limited time on other
                  switches in the stack to come online.
              
progressing     - Master election or mismatch checks in
                  progress.
              
added           - The switch is added to the stack.
              
ready           - The switch is operational.
              
sdmMismatch     - The SDM template configured on the master
                  is not supported by the new member.
              
verMismatch     - The operating system version running on the
                  master is different from the operating
                  system version running on this member.
              
featureMismatch - Some of the features configured on the
                  master are not supported on this member.
              
newMasterInit   - Waiting for the new master to finish
                  initialization after master switchover
                  (Master Re-Init).
              
provisioned     - The switch is not an active member of the
                  stack.
              
invalid         - The switch's state machine is in an
                  invalid state.
              
removed         - The switch is removed from the stack.

Context

MIB: CISCO-STACKWISE-MIB
OID: .1.3.6.1.4.1.9.9.500.1.2.1.1.6
Type: column
Access: readonly
Status: current
Parent: cswSwitchInfoEntry
Table: cswSwitchInfoTable
Siblings: 13

Syntax

Enumeration

Values & Constraints

Enumerated Values

`1`	waiting
`2`	progressing
`3`	added
`4`	ready
`5`	sdmMismatch
`6`	verMismatch
`7`	featureMismatch
`8`	newMasterInit
`9`	provisioned
`10`	invalid
`11`	removed

Related Objects

Sibling Objects

Object	Type	Syntax	OID
cswSwitchNumCurrent This object contains the current switch identification number. This number should match any logical labeling on the switch. For example, a switch whose interfaces are labeled 'int…	column	CswSwitchNumber	`.1.3.6.1.4.1.9.9.500.1.2.1.1.1`
cswSwitchPowerCommited This object indicates the power committed to the POE devices connected to the switch.	column	Watts SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.9.9.500.1.2.1.1.10`
cswSwitchSystemPowerPriority This specifies the system's power priority. In case of a power failure then the system with the highest system priority will be brought down last.	column	SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.9.9.500.1.2.1.1.11`
cswSwitchPoeDevicesLowPriority This object specifies the priority of the system's low priority POE devices.	column	SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.9.9.500.1.2.1.1.12`
cswSwitchPoeDevicesHighPriority This object specifies the priority of the system's high priority POE devices. In order to avoid losing the high priority POE devices before the low priority POE devices, this ob…	column	SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.9.9.500.1.2.1.1.13`
cswSwitchPowerAllocated This object indicates the power committed to the POE devices connected to the switch.	column	Watts SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.9.9.500.1.2.1.1.14`
cswSwitchNumNextReload This object contains the cswSwitchNumCurrent to be used at next reload. The maximum value for this object is defined by the cswMaxSwitchNum object. Note: This obje…	column	CswSwitchNumberOrZero	`.1.3.6.1.4.1.9.9.500.1.2.1.1.2`
cswSwitchRole This object describes the function of the switch: master - stack master. member - active member of the stack. notMember - none-a…	column	Enumeration	`.1.3.6.1.4.1.9.9.500.1.2.1.1.3`
cswSwitchSwPriority A number containing the priority of a switch. The switch with the highest priority will become the master. The maximum value for this object is defined by the cswMaxSwitchConfig…	column	CswSwitchPriority	`.1.3.6.1.4.1.9.9.500.1.2.1.1.4`
cswSwitchHwPriority This object contains the hardware priority of a switch. If two or more entries in this table have the same cswSwitchSwPriority value during the master election time, the switch w…	column	CswSwitchPriority	`.1.3.6.1.4.1.9.9.500.1.2.1.1.5`
cswSwitchMacAddress The MAC address of the switch. Note: This object will contain the value of 0000:0000:0000 if the cswSwitchState value is other than 'ready'.	column	SNMPv2-TCMacAddress	`.1.3.6.1.4.1.9.9.500.1.2.1.1.7`
cswSwitchSoftwareImage The software image type running on the switch. Note: This object will contain an empty string if the cswSwitchState value is other than 'ready'.	column	SNMP-FRAMEWORK-MIBSnmpAdminString	`.1.3.6.1.4.1.9.9.500.1.2.1.1.8`
cswSwitchPowerBudget This object indicates the power budget of the switch.	column	Watts SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.9.9.500.1.2.1.1.9`