cswSwitchSystemPowerPriority
CISCO-STACKWISE-MIB ·
.1.3.6.1.4.1.9.9.500.1.2.1.1.11
Object
This specifies the system's power priority. In case of a power failure then the system with the highest system priority will be brought down last.
Context
- MIB
- CISCO-STACKWISE-MIB
- OID
.1.3.6.1.4.1.9.9.500.1.2.1.1.11- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- cswSwitchInfoEntry
- Table
- cswSwitchInfoTable
- Siblings
- 13
Syntax
SNMPv2-SMIUnsigned32
- Source
- SNMPv2-SMIUnsigned32
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cswSwitchNumCurrent This object contains the current switch identification number.
This number should match any logical labeling on the switch.
For example, a switch whose interfaces are labeled
'int… | column | CswSwitchNumber | .1.3.6.1.4.1.9.9.500.1.2.1.1.1 |
| cswSwitchPowerCommited This object indicates the power committed to the POE devices
connected to the switch. | column | Watts SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.500.1.2.1.1.10 |
| cswSwitchPoeDevicesLowPriority This object specifies the priority of the system's low
priority POE devices. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.500.1.2.1.1.12 |
| cswSwitchPoeDevicesHighPriority This object specifies the priority of the system's high
priority POE devices. In order to avoid losing the high
priority POE devices before the low priority POE devices,
this ob… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.500.1.2.1.1.13 |
| cswSwitchPowerAllocated This object indicates the power committed to the POE devices
connected to the switch. | column | Watts SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.500.1.2.1.1.14 |
| cswSwitchNumNextReload This object contains the cswSwitchNumCurrent to be
used at next reload. The maximum value for this object is
defined by the cswMaxSwitchNum object.
Note: This obje… | column | CswSwitchNumberOrZero | .1.3.6.1.4.1.9.9.500.1.2.1.1.2 |
| cswSwitchRole This object describes the function of the switch:
master - stack master.
member - active member of the stack.
notMember - none-a… | column | Enumeration | .1.3.6.1.4.1.9.9.500.1.2.1.1.3 |
| cswSwitchSwPriority A number containing the priority of a switch. The switch with
the highest priority will become the master. The maximum value
for this object is defined by the cswMaxSwitchConfig… | column | CswSwitchPriority | .1.3.6.1.4.1.9.9.500.1.2.1.1.4 |
| cswSwitchHwPriority This object contains the hardware priority of a switch. If
two or more entries in this table have the same
cswSwitchSwPriority value during the master election time,
the switch w… | column | CswSwitchPriority | .1.3.6.1.4.1.9.9.500.1.2.1.1.5 |
| cswSwitchState The current state of a switch:
waiting - Waiting for a limited time on other
switches in the stack to come online.
progress… | column | Enumeration | .1.3.6.1.4.1.9.9.500.1.2.1.1.6 |
| cswSwitchMacAddress The MAC address of the switch.
Note: This object will contain the value of 0000:0000:0000
if the cswSwitchState value is other than 'ready'. | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.9.9.500.1.2.1.1.7 |
| cswSwitchSoftwareImage The software image type running on the switch.
Note: This object will contain an empty string if the
cswSwitchState value is other than 'ready'. | column | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.4.1.9.9.500.1.2.1.1.8 |
| cswSwitchPowerBudget This object indicates the power budget of the switch. | column | Watts SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.500.1.2.1.1.9 |