CISCO-MPLS-TE-STD-EXT-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
4
Rows
4
Columns
38

cmplsTunnelAutoBWTable

table
.1.3.6.1.4.1.9.9.738.1.1 · 1 row entry · 28 columns
Open in standard view 
This table is used in order to manage auto bandwidth data.
This table is sparse dependent on the mplsTunnelTable.  An entry
in this table exists for each mplsTunnelEntry with a
mplsTunnelRole of 'head' or 'headTail'. Each row contains
auto-bandwidth data for the tunnel identified by the indexes
defined later.
An entry is created as soon as a 'head' or 'headTail' MPLS TE
tunnel is configured in the system.
cmplsTunnelAutoBWEntry entry .1.3.6.1.4.1.9.9.738.1.1.1
A conceptual row in cmplsTunnelAutoBWTable. There is an entry
in this table for each MPLS-TE tunnel with mplsTunnelRole
equals to 'head' or 'headTail'.
Indexes
MPLS-TE-STD-MIBmplsTunnelIndex MPLS-TE-STD-MIBmplsTunnelInstance MPLS-TE-STD-MIBmplsTunnelIngressLSRId MPLS-TE-STD-MIBmplsTunnelEgressLSRId
Column Syntax OID
cmplsTunnelAutoBWStatus
This object indicates the operational status [or mode] of the
auto bandwidth algorithm:

- autoBWDisabled: The auto-bandwidth algorithm is not running;
- autoBWEnabled: The auto-bandwidth algorithm is runn…
Enumeration
Enumerated Values:
1autoBWDisabled
2autoBWEnabled
3autoBWCollectOnlyMode
 .1.3.6.1.4.1.9.9.738.1.1.1.1
cmplsTunnelAutoBWMin
This object specifies the minimum bandwidth that the
auto-bandwidth algorithm can apply to a tunnel when the
adjustment threshold is overcome.
This object value is not aplicable if cmplsTunnelAutoBWStatus is
'autoBWDisa…
kbpsSNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.738.1.1.1.2
cmplsTunnelAutoBWMax
This object specifies the maximum bandwidth that the
auto-bandwidth algorithm can apply to a tunnel when the
adjustment threshold is overcome.
This object value is not aplicable if cmplsTunnelAutoBWStatus is
'autoBWDisa…
kbpsSNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.738.1.1.1.3
cmplsTunnelAutoBWAdjThreshPercs
This object specifies the adjustment threshold percentage that
needs to be overcome in order to trigger a new bandwidth
application.
This object value is not aplicable if cmplsTunnelAutoBWStatus is
'autoBWDisabled'.
CmplsTunnelBWPercentr/w
Textual Convention: CmplsTunnelBWPercent Unsigned32
Type Constraints:
range: 0..100
 .1.3.6.1.4.1.9.9.738.1.1.1.4
cmplsTunnelAutoBWAdjThreshBW
This object specifies the adjustment threshold bandwidth that
needs to be overcome in order to trigger a new bandwidth
application.
This object value is not aplicable if cmplsTunnelAutoBWStatus is
'autoBWDisabled'.
kbpsSNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.738.1.1.1.5
cmplsTunnelAutoBWOverflowThreshPercs
This object specifies the adjustment threshold percentage that
needs to be overcome in order to trigger an overflow occurrence.
If the application period has not completed when a
cmplsTunnelAutoBWOverflowLimit overflow …
CmplsTunnelBWPercentr/w
Textual Convention: CmplsTunnelBWPercent Unsigned32
Type Constraints:
range: 0..100
 .1.3.6.1.4.1.9.9.738.1.1.1.6
cmplsTunnelAutoBWOverflowThreshBW
This object specifies the adjustment threshold bandwidth that
needs to be overcome in order to trigger an overflow occurrence.
If the application period has not completed when a
cmplsTunnelAutoBWOverflowLimit overflow h…
kbpsSNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.738.1.1.1.7
cmplsTunnelAutoBWOverflowLimit
This object specifies the number of consecutive collections
exceeding overflow threshold.
If the application period has not completed when a
cmplsTunnelAutoBWOverflowLimit overflow has occurred, a new
bandwidth will be …
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.738.1.1.1.8
cmplsTunnelAutoBWUnderflowThreshPercs
This object specifies the adjustment threshold percentage that
needs to be overcome in order to trigger an underflow
occurrence.
If the application period has not completed when a
cmplsTunnelAutoBWUnderflowLimit underfl…
CmplsTunnelBWPercentr/w
Textual Convention: CmplsTunnelBWPercent Unsigned32
Type Constraints:
range: 0..100
 .1.3.6.1.4.1.9.9.738.1.1.1.9
cmplsTunnelAutoBWUnderflowThreshBW
This object specifies the adjustment threshold bandwidth that
needs to be overcome in order to trigger an underflow
occurrence.
If the application period has not completed when a
cmplsTunnelAutoBWUnderflowLimit underflo…
kbpsSNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.738.1.1.1.10
cmplsTunnelAutoBWUnderflowLimit
This object specifies the number of consecutive collections
under the underflow threshold.
If the application period has not completed when a
cmplsTunnelAutoBWUnderflowLimit underflow has occurred, a new
bandwidth will …
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.738.1.1.1.11
cmplsTunnelAutoBWApplicationFrequency
This object specifies the bandwidth application period.
This object value is not aplicable if cmplsTunnelAutoBWStatus is
'autoBWDisabled'.
secondsSNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.738.1.1.1.12
cmplsTunnelAutoBWCollectionFrequency
This object specifies the sampling period for data rates.
This object value is not aplicable if cmplsTunnelAutoBWStatus is
'autoBWDisabled'.
secondsSNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.738.1.1.1.13
cmplsTunnelAutoBWLastAppliedBW
This object indicates the last bandwidth applied by the
auto-bandwidth algorithm.
It will be set to zero if no bandwidth has been applied yet.
If mplsTunnelInstance is zero this object will be set to zero.
This object v…
kbpsSNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.738.1.1.1.14
cmplsTunnelAutoBWApplications
This object indicates the number of auto bandwidths applied.
If mplsTunnelInstance is zero this object will be set to zero.
This object value is not aplicable if cmplsTunnelAutoBWStatus is
'autoBWDisabled'.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.738.1.1.1.15
cmplsTunnelAutoBWLastApplicationTrigger
This object indicates the trigger reason for the last bandwidth
application.
If mplsTunnelInstance is zero this object will be set to
'applicationNone'.
This object value is not aplicable if cmplsTunnelAutoBWStatus is
'…
Enumeration
Enumerated Values:
1applicationNone
2applicationPeriodic
3applicationManual
4applicationOverflow
5applicationUnderflow
 .1.3.6.1.4.1.9.9.738.1.1.1.16
cmplsTunnelAutoBWOverflowApplications
This object indicates the number of bandwidth applications
due to overflow occurrences.
If mplsTunnelInstance is zero this object will be set to zero.
This object value is not aplicable if cmplsTunnelAutoBWStatus is
'au…
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.738.1.1.1.17
cmplsTunnelAutoBWOverflowOccurrences
This object indicates the number of overflow occurrences
since last application period.
If mplsTunnelInstance is zero this object will be set to zero.
This object value is not aplicable if cmplsTunnelAutoBWStatus is
'au…
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.738.1.1.1.18
cmplsTunnelAutoBWUnderflowApplications
This object indicates the number of bandwidth applications due
to underflow occurrences.
If mplsTunnelInstance is zero this object will be set to zero.
This object value is not aplicable if cmplsTunnelAutoBWStatus is
'a…
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.738.1.1.1.19
cmplsTunnelAutoBWUnderflowOccurrences
This object indicates the number of underflow occurrences
since last application period.
If mplsTunnelInstance is zero this object will be set to zero.
This object value is not aplicable if cmplsTunnelAutoBWStatus is
'a…
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.738.1.1.1.20
cmplsTunnelAutoBWUnderflowHighestBW
This object indicates the highest sample collected during
an underflow sequence.
If mplsTunnelInstance is zero this object will be set to zero.
This object value is not aplicable if cmplsTunnelAutoBWStatus is
'autoBWDis…
kbpsSNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.738.1.1.1.21
cmplsTunnelAutoBWRequested
This object indicates the bandwidth requested by the
auto-bandwidth algorithm.
If mplsTunnelInstance is zero this object will be set to zero.
This object value is not aplicable if cmplsTunnelAutoBWStatus is
'autoBWDisab…
kpbsSNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.738.1.1.1.22
cmplsTunnelAutoBWSignaled
This object indicates the bandwidth signaled by the
auto-bandwidth algorithm.
If mplsTunnelInstance is zero this object will be set to zero.
This object value is not aplicable if cmplsTunnelAutoBWStatus is
'autoBWDisabl…
kpbsSNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.738.1.1.1.23
cmplsTunnelAutoBWCollectOnlyRequested
This object indicates the bandwidth that would have been
requested by the auto-bandwidth algorithm if the auto-bandwidth
functionality was enabled. If the collect only mode is enabled,
the bandwidth change request will …
kpbsSNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.738.1.1.1.24
cmplsTunnelAutoBWHighest
This object indicates the highest bandwidth sampled by
the auto-bandwidth algorithm.
If mplsTunnelInstance is zero this object will be set to zero.
This object value is not aplicable if cmplsTunnelAutoBWStatus is
'autoB…
kpbsSNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.738.1.1.1.25
cmplsTunnelAutoBWCollectedSamples
This object indicates the samples collected since the last
auto-bandwidth application.
If mplsTunnelInstance is zero this object will be set to zero.
This object value is not aplicable if cmplsTunnelAutoBWStatus is
'aut…
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.738.1.1.1.26
cmplsTunnelAutoBWJitter
This object indicates the auto-bandwidth application jitter.
Jitter is the extra time to be added to the application interval
the first time the auto bandwidth is applied.
If mplsTunnelInstance is zero this object will …
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.738.1.1.1.27
cmplsTunnelAutoBWAppRejectReason
This object indicates the reason for the bandwidth application
rejection.
This object value is not aplicable if cmplsTunnelAutoBWStatus is
'autoBWDisabled'.
Enumeration
Enumerated Values:
1applicationAllowed
2autoBWDisabled
3tunnelIsDown
4tunnelIsFRR
5tunnelIsBackup
6tunnelIsLockDown
 .1.3.6.1.4.1.9.9.738.1.1.1.28

cmplsTeTunnelReasonTable

table
.1.3.6.1.4.1.9.9.738.1.2 · 1 row entry · 6 columns
Open in standard view 
This table is used in order to indicate the causes for the
notifications.
cmplsTeTunnelReasonEntry entry .1.3.6.1.4.1.9.9.738.1.2.1
A conceptual row in cmplsTunnelReasonTable.
Indexes
MPLS-TE-STD-MIBmplsTunnelIndex MPLS-TE-STD-MIBmplsTunnelInstance MPLS-TE-STD-MIBmplsTunnelIngressLSRId MPLS-TE-STD-MIBmplsTunnelEgressLSRId
Column Syntax OID
cmplsTunnelReoptReason
This object indicates the reason of the tunnel reoptimization:
- unknown: the reason is not known
- periodicTimerExpiry: Periodic Reoptimization
- bandwidthCLIChange: the tunnel bandwidth has been
changed from CLI
- …
Enumeration
Enumerated Values:
1unknown
2periodicTimerExpiry
3bandwidthCLIChange
4bandwidthOverflow
5bandwidthUnderflow
6bandwidthAdjustment
7fastReRoute
8cliRequest
9metricTypeChange
10preferredPathExists
11poSwitchoverTrigger
12bandwidthChange
13autoBandwidth
14remergeError
15dueToMaximumMetric
16pathProtectionSwitchover
17iEPEnableReoptimization
18affinityPathVerificationFail
19softPreemption
20preferredTreeExists
21costLimitPathVerificationFail
22linkupReopt
23iEPChange
24poChange
25destChange
26bfdSessionTypeChange
 .1.3.6.1.4.1.9.9.738.1.2.1.1
cmplsTunnelInsuffBWFailedOperation
This object indicates whether the tunnel could not be setup or
reoptimized because of insufficient bandwidth:
- unknown: the reason is not known
- failedToSetup: insufficient bandwidth during
…
Enumeration
Enumerated Values:
1unknown
2failedToSetup
3failedToReoptimize
 .1.3.6.1.4.1.9.9.738.1.2.1.2
cmplsTunnelPreemptionType
This object indicates LSP Preemption type of this LSP:
- unknown: the type is not known
- hardPreemption: the preempted LSP resources are
freed immediately; the LSP is broken immediately
and the traffic is disrupte…
Enumeration
Enumerated Values:
1unknown
2hardPreemption
3softPreemption
4frrSoftPreemption
 .1.3.6.1.4.1.9.9.738.1.2.1.3
cmplsTunnelPreemptionLinkAddrType
This object indicates the address type of the link where the
preemption occurs - another, higher priority LSP is being
admitted on this link and there is not enough bandwidth for it
causing this LSP to be preempted (re…
INET-ADDRESS-MIBInetAddressType
Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.9.9.738.1.2.1.4
cmplsTunnelPreemptionLinkAddr
This object indicates the address of the link where the
preemption occurs - another, higher priority LSP is being
admitted on this link and there is not enough bandwidth for it
causing this LSP to be preempted (removed…
INET-ADDRESS-MIBInetAddress
Textual Convention: INET-ADDRESS-MIBInetAddress OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.9.738.1.2.1.5
cmplsTunnelReRoutePendingClearReason
This object indicates the reason why the tunnel
is not longer in the reroute pending state:
- unknown: the reason is unknown
- reoptimized: the tunnel has been reoptimized
- reinstated: the tunnel has been reinstated
Enumeration
Enumerated Values:
1unknown
2reoptimized
3reinstated
 .1.3.6.1.4.1.9.9.738.1.2.1.6

cmplsTeTunnelFailReasonTable

table
.1.3.6.1.4.1.9.9.738.1.3 · 1 row entry · 3 columns
Open in standard view 
This table is used in order to indicate the causes for the
MPLS TE tunnel failure notifications.
cmplsTeTunnelFailReasonEntry entry .1.3.6.1.4.1.9.9.738.1.3.1
A conceptual row in the cmplsTeTunnelFailReasonTable.
Indexes
MPLS-TE-STD-MIBmplsTunnelIndex MPLS-TE-STD-MIBmplsTunnelInstance MPLS-TE-STD-MIBmplsTunnelIngressLSRId MPLS-TE-STD-MIBmplsTunnelEgressLSRId MPLS-TE-STD-MIBmplsTunnelARHopListIndex
Column Syntax OID
cmplsTeFailReasonType
This object indicates the type (category) of fail reason.
Enumeration
Enumerated Values:
1unknown
2bfd
3generalTe
 .1.3.6.1.4.1.9.9.738.1.3.1.1
cmplsTeFailReason deprecated
This object indicates specific fail reason value based on the
fail reason type indicated by cmplsTeFailReasonType.

Fail Reason Type Fail Reason Value Type
---------------- ----…
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.9.738.1.3.1.2
cmplsTeFailReasonRev
This object provieds more deails on fail reason.

cmplsTeFailReason values for reasonType bfd(2) mirror the
CiscoBfdDiag values:
- noDiagnostic
No bfd diagnostic info
- controlDetectionTimeExpired
…
Enumeration
Enumerated Values:
0noDiagnostic
1controlDetectionTimeExpired
2echoFunctionFailed
3neighborSignaledSessionDown
4forwardingPlaneReset
5pathDown
6concatenatedPathDown
7administrativelyDown
8reverseConcatenatedPathDown
9unknown
21bfdSessionBringupTimeout
 .1.3.6.1.4.1.9.9.738.1.3.1.3

cmplsTunnelLoadshareTable

table
.1.3.6.1.4.1.9.9.738.1.4 · 1 row entry · 1 columns
Open in standard view 
This table is used in order to manage load data.
cmplsTunnelLoadshareEntry entry .1.3.6.1.4.1.9.9.738.1.4.1
A conceptual row in cmplsTunnelLoadshareTable. There is an
entry in this table for each MPLS-TE tunnel.
Indexes
MPLS-TE-STD-MIBmplsTunnelIndex MPLS-TE-STD-MIBmplsTunnelInstance MPLS-TE-STD-MIBmplsTunnelIngressLSRId MPLS-TE-STD-MIBmplsTunnelEgressLSRId
Column Syntax OID
cmplsTunnelLoadShare
This object indicates the Load-share as defined by the
bandwidth attribute (default) or explicitly configured
using the load-share command under tunnel configuration.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.738.1.4.1.1