cmplsTunnelAutoBWStatus
CISCO-MPLS-TE-STD-EXT-MIB ·
.1.3.6.1.4.1.9.9.738.1.1.1.1
Object
column
Enumeration
This object indicates the operational status [or mode] of the
auto bandwidth algorithm:
- autoBWDisabled: The auto-bandwidth algorithm is not running;
- autoBWEnabled: The auto-bandwidth algorithm is running;
- autoBWCollectOnlyMode: The auto-bandwidth algorithm is
running,
but the bandwidth applications are
disabled;
Context
- MIB
- CISCO-MPLS-TE-STD-EXT-MIB
- OID
.1.3.6.1.4.1.9.9.738.1.1.1.1- Type
- column
- Access
- readonly
- Status
- current
- Parent
- cmplsTunnelAutoBWEntry
- Table
- cmplsTunnelAutoBWTable
- Siblings
- 27
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | autoBWDisabled |
2 | autoBWEnabled |
3 | autoBWCollectOnlyMode |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cmplsTunnelAutoBWUnderflowThreshBW This object specifies the adjustment threshold bandwidth that
needs to be overcome in order to trigger an underflow
occurrence.
If the application period has not completed when a
… | column | kbps SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.738.1.1.1.10 |
| cmplsTunnelAutoBWUnderflowLimit This object specifies the number of consecutive collections
under the underflow threshold.
If the application period has not completed when a
cmplsTunnelAutoBWUnderflowLimit under… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.738.1.1.1.11 |
| cmplsTunnelAutoBWApplicationFrequency This object specifies the bandwidth application period.
This object value is not aplicable if cmplsTunnelAutoBWStatus is
'autoBWDisabled'. | column | seconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.738.1.1.1.12 |
| cmplsTunnelAutoBWCollectionFrequency This object specifies the sampling period for data rates.
This object value is not aplicable if cmplsTunnelAutoBWStatus is
'autoBWDisabled'. | column | seconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.738.1.1.1.13 |
| cmplsTunnelAutoBWLastAppliedBW This object indicates the last bandwidth applied by the
auto-bandwidth algorithm.
It will be set to zero if no bandwidth has been applied yet.
If mplsTunnelInstance is zero this o… | column | kbps SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.738.1.1.1.14 |
| cmplsTunnelAutoBWApplications This object indicates the number of auto bandwidths applied.
If mplsTunnelInstance is zero this object will be set to zero.
This object value is not aplicable if cmplsTunnelAutoBW… | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.9.738.1.1.1.15 |
| cmplsTunnelAutoBWLastApplicationTrigger This object indicates the trigger reason for the last bandwidth
application.
If mplsTunnelInstance is zero this object will be set to
'applicationNone'.
This object value is not a… | column | Enumeration | .1.3.6.1.4.1.9.9.738.1.1.1.16 |
| cmplsTunnelAutoBWOverflowApplications This object indicates the number of bandwidth applications
due to overflow occurrences.
If mplsTunnelInstance is zero this object will be set to zero.
This object value is not apl… | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.9.738.1.1.1.17 |
| cmplsTunnelAutoBWOverflowOccurrences This object indicates the number of overflow occurrences
since last application period.
If mplsTunnelInstance is zero this object will be set to zero.
This object value is not apl… | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.9.738.1.1.1.18 |
| cmplsTunnelAutoBWUnderflowApplications This object indicates the number of bandwidth applications due
to underflow occurrences.
If mplsTunnelInstance is zero this object will be set to zero.
This object value is not ap… | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.9.738.1.1.1.19 |
| cmplsTunnelAutoBWMin This object specifies the minimum bandwidth that the
auto-bandwidth algorithm can apply to a tunnel when the
adjustment threshold is overcome.
This object value is not aplicable i… | column | kbps SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.738.1.1.1.2 |
| cmplsTunnelAutoBWUnderflowOccurrences This object indicates the number of underflow occurrences
since last application period.
If mplsTunnelInstance is zero this object will be set to zero.
This object value is not ap… | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.9.738.1.1.1.20 |
| cmplsTunnelAutoBWUnderflowHighestBW This object indicates the highest sample collected during
an underflow sequence.
If mplsTunnelInstance is zero this object will be set to zero.
This object value is not aplicable … | column | kbps SNMPv2-SMIGauge32 | .1.3.6.1.4.1.9.9.738.1.1.1.21 |
| cmplsTunnelAutoBWRequested This object indicates the bandwidth requested by the
auto-bandwidth algorithm.
If mplsTunnelInstance is zero this object will be set to zero.
This object value is not aplicable if… | column | kpbs SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.738.1.1.1.22 |
| cmplsTunnelAutoBWSignaled This object indicates the bandwidth signaled by the
auto-bandwidth algorithm.
If mplsTunnelInstance is zero this object will be set to zero.
This object value is not aplicable if … | column | kpbs SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.738.1.1.1.23 |
| cmplsTunnelAutoBWCollectOnlyRequested This object indicates the bandwidth that would have been
requested by the auto-bandwidth algorithm if the auto-bandwidth
functionality was enabled. If the collect only mode is ena… | column | kpbs SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.738.1.1.1.24 |
| cmplsTunnelAutoBWHighest This object indicates the highest bandwidth sampled by
the auto-bandwidth algorithm.
If mplsTunnelInstance is zero this object will be set to zero.
This object value is not aplica… | column | kpbs SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.738.1.1.1.25 |
| cmplsTunnelAutoBWCollectedSamples This object indicates the samples collected since the last
auto-bandwidth application.
If mplsTunnelInstance is zero this object will be set to zero.
This object value is not apli… | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.9.738.1.1.1.26 |
| cmplsTunnelAutoBWJitter This object indicates the auto-bandwidth application jitter.
Jitter is the extra time to be added to the application interval
the first time the auto bandwidth is applied.
If mpls… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.738.1.1.1.27 |
| cmplsTunnelAutoBWAppRejectReason This object indicates the reason for the bandwidth application
rejection.
This object value is not aplicable if cmplsTunnelAutoBWStatus is
'autoBWDisabled'. | column | Enumeration | .1.3.6.1.4.1.9.9.738.1.1.1.28 |
| cmplsTunnelAutoBWMax This object specifies the maximum bandwidth that the
auto-bandwidth algorithm can apply to a tunnel when the
adjustment threshold is overcome.
This object value is not aplicable i… | column | kbps SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.738.1.1.1.3 |
| cmplsTunnelAutoBWAdjThreshPercs This object specifies the adjustment threshold percentage that
needs to be overcome in order to trigger a new bandwidth
application.
This object value is not aplicable if cmplsTun… | column | CmplsTunnelBWPercent | .1.3.6.1.4.1.9.9.738.1.1.1.4 |
| cmplsTunnelAutoBWAdjThreshBW This object specifies the adjustment threshold bandwidth that
needs to be overcome in order to trigger a new bandwidth
application.
This object value is not aplicable if cmplsTunn… | column | kbps SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.738.1.1.1.5 |
| cmplsTunnelAutoBWOverflowThreshPercs This object specifies the adjustment threshold percentage that
needs to be overcome in order to trigger an overflow occurrence.
If the application period has not completed when a
… | column | CmplsTunnelBWPercent | .1.3.6.1.4.1.9.9.738.1.1.1.6 |
| cmplsTunnelAutoBWOverflowThreshBW This object specifies the adjustment threshold bandwidth that
needs to be overcome in order to trigger an overflow occurrence.
If the application period has not completed when a
c… | column | kbps SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.738.1.1.1.7 |
| cmplsTunnelAutoBWOverflowLimit This object specifies the number of consecutive collections
exceeding overflow threshold.
If the application period has not completed when a
cmplsTunnelAutoBWOverflowLimit overflo… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.738.1.1.1.8 |
| cmplsTunnelAutoBWUnderflowThreshPercs This object specifies the adjustment threshold percentage that
needs to be overcome in order to trigger an underflow
occurrence.
If the application period has not completed when a… | column | CmplsTunnelBWPercent | .1.3.6.1.4.1.9.9.738.1.1.1.9 |