cmplsTunnelAutoBWJitter
CISCO-MPLS-TE-STD-EXT-MIB ·
.1.3.6.1.4.1.9.9.738.1.1.1.27
Object
column
SNMPv2-SMIUnsigned32
This object indicates the auto-bandwidth application jitter. Jitter is the extra time to be added to the application interval the first time the auto bandwidth is applied. If mplsTunnelInstance is zero this object will be set to zero. This object value is not aplicable if cmplsTunnelAutoBWStatus is 'autoBWDisabled'.
Context
- MIB
- CISCO-MPLS-TE-STD-EXT-MIB
- OID
.1.3.6.1.4.1.9.9.738.1.1.1.27- Type
- column
- Access
- readonly
- Status
- current
- Parent
- cmplsTunnelAutoBWEntry
- Table
- cmplsTunnelAutoBWTable
- Siblings
- 27
Syntax
SNMPv2-SMIUnsigned32
- Source
- SNMPv2-SMIUnsigned32
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cmplsTunnelAutoBWStatus This object indicates the operational status [or mode] of the
auto bandwidth algorithm:
- autoBWDisabled: The auto-bandwidth algorithm is not running;
- autoBWEnabl… | column | Enumeration | .1.3.6.1.4.1.9.9.738.1.1.1.1 |
| cmplsTunnelAutoBWUnderflowThreshBW This object specifies the adjustment threshold bandwidth that
needs to be overcome in order to trigger an underflow
occurrence.
If the application period has not completed when a
… | column | kbps SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.738.1.1.1.10 |
| cmplsTunnelAutoBWUnderflowLimit This object specifies the number of consecutive collections
under the underflow threshold.
If the application period has not completed when a
cmplsTunnelAutoBWUnderflowLimit under… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.738.1.1.1.11 |
| cmplsTunnelAutoBWApplicationFrequency This object specifies the bandwidth application period.
This object value is not aplicable if cmplsTunnelAutoBWStatus is
'autoBWDisabled'. | column | seconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.738.1.1.1.12 |
| cmplsTunnelAutoBWCollectionFrequency This object specifies the sampling period for data rates.
This object value is not aplicable if cmplsTunnelAutoBWStatus is
'autoBWDisabled'. | column | seconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.738.1.1.1.13 |
| cmplsTunnelAutoBWLastAppliedBW This object indicates the last bandwidth applied by the
auto-bandwidth algorithm.
It will be set to zero if no bandwidth has been applied yet.
If mplsTunnelInstance is zero this o… | column | kbps SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.738.1.1.1.14 |
| cmplsTunnelAutoBWApplications This object indicates the number of auto bandwidths applied.
If mplsTunnelInstance is zero this object will be set to zero.
This object value is not aplicable if cmplsTunnelAutoBW… | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.9.738.1.1.1.15 |
| cmplsTunnelAutoBWLastApplicationTrigger This object indicates the trigger reason for the last bandwidth
application.
If mplsTunnelInstance is zero this object will be set to
'applicationNone'.
This object value is not a… | column | Enumeration | .1.3.6.1.4.1.9.9.738.1.1.1.16 |
| cmplsTunnelAutoBWOverflowApplications This object indicates the number of bandwidth applications
due to overflow occurrences.
If mplsTunnelInstance is zero this object will be set to zero.
This object value is not apl… | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.9.738.1.1.1.17 |
| cmplsTunnelAutoBWOverflowOccurrences This object indicates the number of overflow occurrences
since last application period.
If mplsTunnelInstance is zero this object will be set to zero.
This object value is not apl… | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.9.738.1.1.1.18 |
| cmplsTunnelAutoBWUnderflowApplications This object indicates the number of bandwidth applications due
to underflow occurrences.
If mplsTunnelInstance is zero this object will be set to zero.
This object value is not ap… | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.9.738.1.1.1.19 |
| cmplsTunnelAutoBWMin This object specifies the minimum bandwidth that the
auto-bandwidth algorithm can apply to a tunnel when the
adjustment threshold is overcome.
This object value is not aplicable i… | column | kbps SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.738.1.1.1.2 |
| cmplsTunnelAutoBWUnderflowOccurrences This object indicates the number of underflow occurrences
since last application period.
If mplsTunnelInstance is zero this object will be set to zero.
This object value is not ap… | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.9.738.1.1.1.20 |
| cmplsTunnelAutoBWUnderflowHighestBW This object indicates the highest sample collected during
an underflow sequence.
If mplsTunnelInstance is zero this object will be set to zero.
This object value is not aplicable … | column | kbps SNMPv2-SMIGauge32 | .1.3.6.1.4.1.9.9.738.1.1.1.21 |
| cmplsTunnelAutoBWRequested This object indicates the bandwidth requested by the
auto-bandwidth algorithm.
If mplsTunnelInstance is zero this object will be set to zero.
This object value is not aplicable if… | column | kpbs SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.738.1.1.1.22 |
| cmplsTunnelAutoBWSignaled This object indicates the bandwidth signaled by the
auto-bandwidth algorithm.
If mplsTunnelInstance is zero this object will be set to zero.
This object value is not aplicable if … | column | kpbs SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.738.1.1.1.23 |
| cmplsTunnelAutoBWCollectOnlyRequested This object indicates the bandwidth that would have been
requested by the auto-bandwidth algorithm if the auto-bandwidth
functionality was enabled. If the collect only mode is ena… | column | kpbs SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.738.1.1.1.24 |
| cmplsTunnelAutoBWHighest This object indicates the highest bandwidth sampled by
the auto-bandwidth algorithm.
If mplsTunnelInstance is zero this object will be set to zero.
This object value is not aplica… | column | kpbs SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.738.1.1.1.25 |
| cmplsTunnelAutoBWCollectedSamples This object indicates the samples collected since the last
auto-bandwidth application.
If mplsTunnelInstance is zero this object will be set to zero.
This object value is not apli… | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.9.738.1.1.1.26 |
| cmplsTunnelAutoBWAppRejectReason This object indicates the reason for the bandwidth application
rejection.
This object value is not aplicable if cmplsTunnelAutoBWStatus is
'autoBWDisabled'. | column | Enumeration | .1.3.6.1.4.1.9.9.738.1.1.1.28 |
| cmplsTunnelAutoBWMax This object specifies the maximum bandwidth that the
auto-bandwidth algorithm can apply to a tunnel when the
adjustment threshold is overcome.
This object value is not aplicable i… | column | kbps SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.738.1.1.1.3 |
| cmplsTunnelAutoBWAdjThreshPercs This object specifies the adjustment threshold percentage that
needs to be overcome in order to trigger a new bandwidth
application.
This object value is not aplicable if cmplsTun… | column | CmplsTunnelBWPercent | .1.3.6.1.4.1.9.9.738.1.1.1.4 |
| cmplsTunnelAutoBWAdjThreshBW This object specifies the adjustment threshold bandwidth that
needs to be overcome in order to trigger a new bandwidth
application.
This object value is not aplicable if cmplsTunn… | column | kbps SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.738.1.1.1.5 |
| cmplsTunnelAutoBWOverflowThreshPercs This object specifies the adjustment threshold percentage that
needs to be overcome in order to trigger an overflow occurrence.
If the application period has not completed when a
… | column | CmplsTunnelBWPercent | .1.3.6.1.4.1.9.9.738.1.1.1.6 |
| cmplsTunnelAutoBWOverflowThreshBW This object specifies the adjustment threshold bandwidth that
needs to be overcome in order to trigger an overflow occurrence.
If the application period has not completed when a
c… | column | kbps SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.738.1.1.1.7 |
| cmplsTunnelAutoBWOverflowLimit This object specifies the number of consecutive collections
exceeding overflow threshold.
If the application period has not completed when a
cmplsTunnelAutoBWOverflowLimit overflo… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.738.1.1.1.8 |
| cmplsTunnelAutoBWUnderflowThreshPercs This object specifies the adjustment threshold percentage that
needs to be overcome in order to trigger an underflow
occurrence.
If the application period has not completed when a… | column | CmplsTunnelBWPercent | .1.3.6.1.4.1.9.9.738.1.1.1.9 |