CISCO-LWAPP-SI-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
10
Rows
10
Columns
81

cLSiAqTable

table
.1.3.6.1.4.1.9.9.513.1.6.1.1.1.1 · 1 row entry · 10 columns
Open in standard view 
This table represents the information about the
air quality parameters corresponding to
the dot11 interfaces of the APs that have joined
the controller for a given channel.
cLSiAqEntry entry .1.3.6.1.4.1.9.9.513.1.6.1.1.1.1.1
An entry in this table represents the 802.11
AQ parameters of a channel on a dot11 interface
of an AP that has joined the controller.

Entries are added every 15 minutes when a
report is generated for a c…
Indexes
CISCO-LWAPP-AP-MIBcLApSysMacAddress CISCO-LWAPP-AP-MIBcLApDot11IfSlotId cLSiAqChannelNumber
Column Syntax OID
cLSiAqChannelNumber
This object represents the channel number
for this report.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.513.1.6.1.1.1.1.1.1
cLSiAqMinIndex
This object represents the minimum
air quality Index.
Unsigned32
Constraints:
range: 0-256
 .1.3.6.1.4.1.9.9.513.1.6.1.1.1.1.1.2
cLSiAqIndex
This object represents the air quality
index.
Unsigned32
Constraints:
range: 0-256
 .1.3.6.1.4.1.9.9.513.1.6.1.1.1.1.1.3
cLSiAqTotalChannelPower
This object represents the RSSI value
for total channel power.
dbmInteger32
Constraints:
range: -90--60
 .1.3.6.1.4.1.9.9.513.1.6.1.1.1.1.1.4
cLSiAqTotalChannelDutyCycle
This object represents the total
channel duty cycle.
percentUnsigned32
Constraints:
range: 0-100
 .1.3.6.1.4.1.9.9.513.1.6.1.1.1.1.1.5
cLSiAqInterferencePower
This object represents the RSSI value
for interference power.
dbmInteger32
Constraints:
range: -90--60
 .1.3.6.1.4.1.9.9.513.1.6.1.1.1.1.1.6
cLSiAqInterferenceDutyCycle
This object represents the interference
duty cycle.
percentUnsigned32
Constraints:
range: 0-100
 .1.3.6.1.4.1.9.9.513.1.6.1.1.1.1.1.7
cLSiAqInterferenceDeviceCount
This object represents the count of
total interference devices.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.513.1.6.1.1.1.1.1.8
cLSiAqInterfererClassReportCount
This object represents the number of entries
in the worst interference category table.
Unsigned32
Constraints:
range: 0-5
 .1.3.6.1.4.1.9.9.513.1.6.1.1.1.1.1.9
cLSiAqTimeStamp
This object represents the time when the
AQ registered with the controller.

This represents number of seconds elapsed since 00:00:00
on January 1, 1970, Coordinated Universal Time (UTC). So
a value of '1…
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.513.1.6.1.1.1.1.1.10

cLSiAqInterferenceClassReportTable

table
.1.3.6.1.4.1.9.9.513.1.6.1.1.1.2 · 1 row entry · 6 columns
Open in standard view 
This table represents the information about the
air quality interference category  on a 
dot11 interfaces of the APs that have joined
the controller for a given channel. 
The total number of entries are represented 
by cLSiAqInterfererClassReportCount object.
cLSiAqInterferenceClassReportEntry entry .1.3.6.1.4.1.9.9.513.1.6.1.1.1.2.1
An entry in this table represents the 802.11
AQ interfernce category on a channel for a
dot11 interface of an AP that has joined the
controller.

Entries are added peridocally when a
report is generated …
Indexes
CISCO-LWAPP-AP-MIBcLApSysMacAddress CISCO-LWAPP-AP-MIBcLApDot11IfSlotId cLSiAqChannelNumber cLSiAqInterferenceClassReportIndex
Column Syntax OID
cLSiAqInterferenceClassReportIndex
This object represents the category index
for this report.cLSiAqInterfererClassReportCount in cLSiAqTable tells how many
entries are there
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.513.1.6.1.1.1.2.1.1
cLSiAqInterferenceClassReportClass
This object represents the device type
for this report.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.513.1.6.1.1.1.2.1.2
cLSiAqInterferenceClassReportSeverityIndex
This object represents the severity index
for this report.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.513.1.6.1.1.1.2.1.3
cLSiAqInterferenceClassReportPower
This object represents the RSSI value
for interference category power.
dbmInteger32
Constraints:
range: -90--60
 .1.3.6.1.4.1.9.9.513.1.6.1.1.1.2.1.4
cLSiAqInterferenceClassReportDutyCycle
This object represents the interference
duty cycle.
percentUnsigned32
Constraints:
range: 1-99
 .1.3.6.1.4.1.9.9.513.1.6.1.1.1.2.1.5
cLSiAqInterferenceClassReportDeviceCount
This object represents the count of
total interference devices.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.513.1.6.1.1.1.2.1.6

cLSiIdrTable

table
.1.3.6.1.4.1.9.9.513.1.6.1.1.2.1 · 1 row entry · 13 columns
Open in standard view 
This table represents the information about the
IDR parameters corresponding to
the dot11 interfaces of the APs that have joined
the controller for a given device.
cLSiIdrEntry entry .1.3.6.1.4.1.9.9.513.1.6.1.1.2.1.1
An entry in this table represents the 802.11
IDR parameters of a channel on a dot11 interface
of an AP that has joined the controller.

Entries are added periodically when a
report is generated for a chan…
Indexes
CISCO-LWAPP-AP-MIBcLApSysMacAddress CISCO-LWAPP-AP-MIBcLApDot11IfSlotId cLSiIdrDeviceId
Column Syntax OID
cLSiIdrDeviceId
This object represents the device MAC address
and uniquely identifies an entry in this table.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.513.1.6.1.1.2.1.1.1
cLSiIdrClusterId
This object represents the cluster id.
SNMPv2-TCMacAddress
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.9.9.513.1.6.1.1.2.1.1.2
cLSiIdrTimeStamp
This object represents the time when the
interferer registered with the controller.

This represents number of seconds elapsed since 00:00:00
on January 1, 1970, Coordinated Universal Time (UTC). So
a val…
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.513.1.6.1.1.2.1.1.3
cLSiIdrDeviceType
This object represents the device type
and category.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.513.1.6.1.1.2.1.1.4
cLSiIdrSeverity
This object represents the severity.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.513.1.6.1.1.2.1.1.5
cLSiIdrDetectingApMac
This object represents the detecting AP MAC
address.
SNMPv2-TCMacAddress
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.9.9.513.1.6.1.1.2.1.1.6
cLSiIdrDutyCycle
This object represents the duty cycle.
percentUnsigned32
Constraints:
range: 0-100
 .1.3.6.1.4.1.9.9.513.1.6.1.1.2.1.1.7
cLSiIdrAntennaId
This object represents the antenna information.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.513.1.6.1.1.2.1.1.8
cLSiIdrRssi
This object represents the RSSI value
for transmit channel power.
dbmInteger32
Constraints:
range: -90--60
 .1.3.6.1.4.1.9.9.513.1.6.1.1.2.1.1.9
cLSiIdrRadioBandId
This object identifies the 802.11 band this entry
corresponds to.
CISCO-LWAPP-TC-MIBCLDot11Band
Textual Convention: CISCO-LWAPP-TC-MIBCLDot11Band Enumeration
Type Values:
1band2dot4
2band5
3maui-6ghz
 .1.3.6.1.4.1.9.9.513.1.6.1.1.2.1.1.10
cLSiIdrAffectedChannels
This object represents the affected channels.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.513.1.6.1.1.2.1.1.11
cLSiIdrDeviceSignatureLen
This object represents the length of the interferer
device signature.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.513.1.6.1.1.2.1.1.12
cLSiIdrDeviceSignature
This object represents the Device Signature Id.
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.9.9.513.1.6.1.1.2.1.1.13

cLSiIdrClusterTable

table
.1.3.6.1.4.1.9.9.513.1.6.1.1.2.2 · 1 row entry · 16 columns
Open in standard view 
This table represents the information about the
IDR parameters corresponding to
the dot11 interfaces of the APs that have joined
the controller for a given device.
cLSiIdrClusterEntry entry .1.3.6.1.4.1.9.9.513.1.6.1.1.2.2.1
An entry in this table represents the 802.11
IDR parameters of a channel on a dot11 interface
of an AP that has joined the controller.

Entries are added periodically when a
report is generated for a chan…
Indexes
cLSiIdrClusterRadioBandId cLSiIdrClusterClusterId cLSiIdrClusterDeviceIndex
Column Syntax OID
cLSiIdrClusterRadioBandId
This object represents the 802.11 band
corresponds to.
CISCO-LWAPP-TC-MIBCLDot11Band
Textual Convention: CISCO-LWAPP-TC-MIBCLDot11Band Enumeration
Type Values:
1band2dot4
2band5
3maui-6ghz
 .1.3.6.1.4.1.9.9.513.1.6.1.1.2.2.1.1
cLSiIdrClusterClusterId
This object represents the cluster id.
SNMPv2-TCMacAddress
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.9.9.513.1.6.1.1.2.2.1.2
cLSiIdrClusterDeviceIndex
This object represents the device
Index inside the Cluster.
Unsigned32
Constraints:
range: 1-10
 .1.3.6.1.4.1.9.9.513.1.6.1.1.2.2.1.3
cLSiIdrClusterDeviceId
This object represents the device which
uniquely identifies an entry in this table.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.513.1.6.1.1.2.2.1.4
cLSiIdrClusterTimeStamp
This object represents the time when the
interferer registered with the controller.

This represents number of seconds elapsed since 00:00:00
on January 1, 1970, Coordinated Universal Time (UTC). So
a val…
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.513.1.6.1.1.2.2.1.5
cLSiIdrClusterDeviceType
This object represents the device type
and category.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.513.1.6.1.1.2.2.1.6
cLSiIdrClusterSeverity
This object represents the severity.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.513.1.6.1.1.2.2.1.7
cLSiIdrClusterDetectingApMac
This object represents the detecting AP MAC
address.
SNMPv2-TCMacAddress
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.9.9.513.1.6.1.1.2.2.1.8
cLSiIdrClusterDutyCycle
This object represents the duty cycle.
percentUnsigned32
Constraints:
range: 0-100
 .1.3.6.1.4.1.9.9.513.1.6.1.1.2.2.1.9
cLSiIdrClusterAntennaId
This object represents the antenna information.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.513.1.6.1.1.2.2.1.10
cLSiIdrClusterRssi
This object represents the RSSI value
for transmit channel power.
dbmInteger32
Constraints:
range: -90--60
 .1.3.6.1.4.1.9.9.513.1.6.1.1.2.2.1.11
cLSiIdrClusterAffectedChannels
This object represents the affected channels.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.513.1.6.1.1.2.2.1.12
cLSiIdrClusterDeviceSignatureLen
This object represents the duty cycle.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.513.1.6.1.1.2.2.1.13
cLSiIdrClusterDeviceSignature
This object represents the Device Signature Id.
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.9.9.513.1.6.1.1.2.2.1.14
cLSiIdrClusterCenterIndex
This object represents the cluster center index.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.513.1.6.1.1.2.2.1.15
cLSiIdrClusterType
This object represents the cluster type.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.513.1.6.1.1.2.2.1.16

cLSiPersistentDeviceTable

table
.1.3.6.1.4.1.9.9.513.1.6.1.1.2.3 · 1 row entry · 3 columns
Open in standard view 
This table represents the information about the
Persistent interference devices corresponding to
the dot11 interface of the APs that have joined
the controller for a given device.
cLSiPersistentDeviceEntry entry .1.3.6.1.4.1.9.9.513.1.6.1.1.2.3.1
An entry in this table represents the 802.11
persistent interference devices of a radio
of an AP that has joined the controller.
Indexes
CISCO-LWAPP-AP-MIBcLApSysMacAddress CISCO-LWAPP-AP-MIBcLApDot11IfSlotId cLSiPersistentDeviceId
Column Syntax OID
cLSiPersistentDeviceId
This object represents the device ID
.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.513.1.6.1.1.2.3.1.1
cLSiPersistentDeviceType
This object represents the device type
and category
OctetString .1.3.6.1.4.1.9.9.513.1.6.1.1.2.3.1.2
cLSiPersistentTimeStamp
This object represents the time when the
persistent interferer device registered with
the controller.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.513.1.6.1.1.2.3.1.3

cLSiPersistentDeviceChanTable

table
.1.3.6.1.4.1.9.9.513.1.6.1.1.2.4 · 1 row entry · 5 columns
Open in standard view 
This table represents the affected channels, DC and power
due to interference caused by persistence device.
cLSiPersistentDeviceChanEntry entry .1.3.6.1.4.1.9.9.513.1.6.1.1.2.4.1
An entry in this table represents the 802.11
persistent device affecting which channel(s)
and with how much DC level and RSSI.
Indexes
CISCO-LWAPP-AP-MIBcLApSysMacAddress CISCO-LWAPP-AP-MIBcLApDot11IfSlotId cLSiPersistentDeviceId cLSiPersistentDeviceChanIndex
Column Syntax OID
cLSiPersistentDeviceChanIndex
The Array Index.
.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.513.1.6.1.1.2.4.1.1
cLSiChannelAffected
This object represents the channel affected
by the persistent device
Unsigned32
Constraints:
range: 0-255
 .1.3.6.1.4.1.9.9.513.1.6.1.1.2.4.1.2
cLSiChannelUtil
This object represents the DC level in
a channel.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.513.1.6.1.1.2.4.1.3
cLSiChannelRSSI
This object represents the RSSI in
a channel.
Integer32
Constraints:
range: -127-128
 .1.3.6.1.4.1.9.9.513.1.6.1.1.2.4.1.4
cLSiChannelPropagationFlag
This object represents whether the Neighboring AP
has propagated information about the affected channel
by a persistent device.
A value of 'true' indicates channel propagation flag is set.
A value of 'false' indicates…
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.9.9.513.1.6.1.1.2.4.1.5

cLSiDot11BandTable

table
.1.3.6.1.4.1.9.9.513.1.6.1.1.3.1 · 1 row entry · 13 columns
Open in standard view 
This table represents the information about the
air quality parameters corresponding to
the dot11 band of the APs that have joined
the controller.
cLSiDot11BandEntry entry .1.3.6.1.4.1.9.9.513.1.6.1.1.3.1.1
An entry in this table represents the
AQ parameters on a dot11 band
of an AP that has joined the controller.
Indexes
cLSiD11Band
Column Syntax OID
cLSiD11Band
This object represents the band for this entry.
CISCO-LWAPP-TC-MIBCLDot11Band
Textual Convention: CISCO-LWAPP-TC-MIBCLDot11Band Enumeration
Type Values:
1band2dot4
2band5
3maui-6ghz
 .1.3.6.1.4.1.9.9.513.1.6.1.1.3.1.1.1
cLSiD11SpectrumIntelligenceEnable
This object specifies whether Spectrum Intelligence (SI) is
enabled on this band. A value of 'true' indicates SI
is enabled. A value of 'false' indicates SI is disabled.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.9.9.513.1.6.1.1.3.1.1.2
cLSiD11InterferenceDeviceList
This object represents the interference device list which
would be considered for detection by controller on the
corresponding radio interface. If bit corresponding to
particular interference device category is set, if …
Bitsr/w
Enumerated Values:
0byte
1byte
2byte
3byte
4byte
5byte
6wifiInvalidChannel
7wifiInverted
8eightZeroTwoDot15dot4
9videoCamera
10dectLikePhone
11continuousTransmitter
12jammer
13tddTransmitter
14bluetoothDiscovery
15eightZeroTwoDot11Fh
16microwaveOven
17bluetoothLink
18bleBeacon
19wifiNeighbor
20wifiRogue
21siFhss
 .1.3.6.1.4.1.9.9.513.1.6.1.1.3.1.1.3
cLSiD11PollingInterval
This object specifies the AQ(Air Quality) polling period in minutes.
minutesUnsigned32r/w
Constraints:
range: 15-60
 .1.3.6.1.4.1.9.9.513.1.6.1.1.3.1.1.4
cLSiD11IdrReportingEnable
This object specifies whether IDR is enabled on this band.
A value of 'true' indicates IDR is enabled. A value of 'false'
indicates IDR is disabled.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.9.9.513.1.6.1.1.3.1.1.6
cLSiD11AqiTrapEnable
This object specifies whether AQ notification is enabled
on this band. A value of 'true' indicates AQ notification
is enabled. A value of 'false' indicates AQ notification is
disabled.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.9.9.513.1.6.1.1.3.1.1.7
cLSiD11AqiTrapThreshold
This object specifies the trap threshold value.
Unsigned32r/w
Constraints:
range: 1-100
 .1.3.6.1.4.1.9.9.513.1.6.1.1.3.1.1.8
cLSiD11IdrTrapEnable
This object specifies whether Interference Device Report notification
is enabled on this band.
A value of 'true' indicates IDR notification
is enabled.
A value of 'false' indicates IDR notification
is disabled.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.9.9.513.1.6.1.1.3.1.1.9
cLSiD11IdrTrapDeviceList
This object represents the interference device list,
that are enabled to generate traps. When bit corresponding
to particular interference category is set, when detected
by controller, trap indicating the detection o…
Bitsr/w
Enumerated Values:
0byte
1byte
2byte
3byte
4byte
5byte
6wifiInvalidChannel
7wifiInverted
8eightZeroTwoDot15dot4
9videoCamera
10dectLikePhone
11continuousTransmitter
12jammer
13tddTransmitter
14bluetoothDiscovery
15eightZeroTwoDot11Fh
16microwaveOven
17bluetoothLink
18bleBeacon
19wifiNeighbor
20wifiRogue
21siFhss
 .1.3.6.1.4.1.9.9.513.1.6.1.1.3.1.1.10
cLSiD11IdrPersistentDevicePropagation
This object specifies whether first hop Persistent Device Propagation
detection is enabled on this band.
A value of 'true' indicates first hop PDA detection is
enabled.
A value of 'false' indicates first hop PDA detec…
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.9.9.513.1.6.1.1.3.1.1.11
cLSiD11IdrUnclassifiedTrapEnable
This object specifies whether trap would be set for unclassified
interference category on this band. A value of 'true' indicates trap
enabled. A value of 'false' indicates trap is
disabled.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.9.9.513.1.6.1.1.3.1.1.12
cLSiD11IdrUnclassifiedTrapThreshold
This object specifies the threshold which would be considered
while sending trap for unclassified interference category.
Unsigned32r/w
Constraints:
range: 1-99
 .1.3.6.1.4.1.9.9.513.1.6.1.1.3.1.1.13
cLSiD11SIEnable
This object specifies whether SI feature, for QCA Aps is enabled,
on this band.
A value of 'true' indicates SI enabled. A value of 'false'
indicates SI is disabled.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.9.9.513.1.6.1.1.3.1.1.14

cLSiDot11BandEventDrivenRrmTable

table
.1.3.6.1.4.1.9.9.513.1.6.1.1.3.2 · 1 row entry · 5 columns
Open in standard view 
This table represents the information about the
event driven RRM corresponding to the dot11 band
of the APs that have joined
the controller.
cLSiDot11BandEventDrivenRrmEntry entry .1.3.6.1.4.1.9.9.513.1.6.1.1.3.2.1
An entry in this table represents the
event driven RRM on a dot 11 band of an
AP that has joined the controller.
Indexes
cLSiD11Band
Column Syntax OID
cLSiD11EventDrivenRrmEnable
This object specifies whether event driven RRM
is enabled on this band. A value of 'true' indicates
event driven RRM is enabled. A value of 'false' indicates event driven RRM
is disabled.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.9.9.513.1.6.1.1.3.2.1.1
cLSiD11EventDrivenRrmThresLvl
This object specifies the event driven RRM threshold level.
low - event driven RRM threshold level set to low.
medium - event driven RRM threshold level set to medium.
high - event driven RRM threshold level set to high…
Enumerationr/w
Enumerated Values:
1low
2medium
3high
4custom
 .1.3.6.1.4.1.9.9.513.1.6.1.1.3.2.1.2
cLSiD11EventDrivenRrmCustomThresVal
This object specifies the event driven RRM Custom threshold value.
percentUnsigned32r/w
Constraints:
range: 0-100
 .1.3.6.1.4.1.9.9.513.1.6.1.1.3.2.1.3
cLSiD11EventDrivenRrmRogueEnable
This object specifies whether event driven RRM
rogue contribution is enabled on this band. A value of 'true' indicates
rogue contribution is enabled. A value of 'false' indicates rogue contribution
is disabled.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.9.9.513.1.6.1.1.3.2.1.4
cLSiD11EventDrivenRrmRogueDutyCycle
This object specifies the event driven RRM rogue contribution duty cycle threshold value.
Unsigned32r/w
Constraints:
range: 1-99
 .1.3.6.1.4.1.9.9.513.1.6.1.1.3.2.1.5

cLSiApIfTable

table
.1.3.6.1.4.1.9.9.513.1.6.1.1.4.1 · 1 row entry · 7 columns
Open in standard view 
This table represents the information about the
air quality parameters corresponding to
the dot11 interfaces of the APs that have joined
the controller.
cLSiApIfEntry entry .1.3.6.1.4.1.9.9.513.1.6.1.1.4.1.1
An entry in this table represents the 802.11
AQ parameters of a channel on a dot11 interface
of an AP that has joined the controller.
Indexes
CISCO-LWAPP-AP-MIBcLApSysMacAddress CISCO-LWAPP-AP-MIBcLApDot11IfSlotId
Column Syntax OID
cLSiApIfSpectrumIntelligenceEnable deprecated
This object indicates whether Spectrun Intelligence (SI) is
enabled on this radio. A value of 'true' indicates SI
is enabled. A value of 'false' indicates SI is disabled.
This object is replaced by cLSiApIfBandSpectrum…
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.9.9.513.1.6.1.1.4.1.1.1
cLSiApIfSpectrumCapable
This object represents whether Spectrum Intelligence (SI) is
enabled on this radio. A value of 'true' indicates SI
is enabled. A value of 'false' indicates SI is not enabled.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.9.9.513.1.6.1.1.4.1.1.2
cLSiApIfRapidUpdateEnable
This object specifies whether rapid update is
enabled on this radio. A value of 'true' indicates rapid
update is enabled. A value of 'false' indicates rapid update
is disabled.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.9.9.513.1.6.1.1.4.1.1.3
cLSiApIfDetailSpectrumModeEnable
This object specifies whether detailed spectrum mode is
enabled on this radio. A value of 'true' indicates detailed
spectrum mode is enabled. A value of 'false' indicates
detailed spectrum mode is disabled.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.9.9.513.1.6.1.1.4.1.1.4
cLSiApIfSensordOperationalStatus deprecated
This object represents the current operational status of the SensorD.
This object is replaced byi cLSiApIfBandSensordOperationalStatus.
Enumeration
Enumerated Values:
1up
2down
3na
 .1.3.6.1.4.1.9.9.513.1.6.1.1.4.1.1.5
cLSiApIfNumOfSeActiveConnection
This object represents the current number of active
Spectrum Expert connections per slot of AP.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.513.1.6.1.1.4.1.1.6
cLSiApIfSensordErrorCode
This object represents the error code of the sensord.
If it is 1, then it means operational status is UP.
If it is 130 then it means operational status is down and the
sensord crash and it is un-recoverable.
If it is n…
Enumeration
Enumerated Values:
1configured
2invalidSIConfig
3apNonCleanAirMode
4failedChannelConfig
5failedResourceAllocation
6failedConnectionWithSensor
7radioNotCleanAirCapable
8failedSIStream
9radioDisabled
129recoverableError
130unrecoverableCrash
 .1.3.6.1.4.1.9.9.513.1.6.1.1.4.1.1.7

cLSiApIfBandTable

table
.1.3.6.1.4.1.9.9.513.1.6.1.1.4.2 · 1 row entry · 3 columns
Open in standard view 
This table represents the information about the
spectrum intelligence/clean air parameters corresponding to a band within
the dot11 interfaces of the APs that have joined
the controller.
cLSiApIfBandEntry entry .1.3.6.1.4.1.9.9.513.1.6.1.1.4.2.1
An entry in this table represents the information about the
air quality parameters corresponding to a band within
the dot11 interfaces of the APs that have joined
the controller.
Indexes
CISCO-LWAPP-AP-MIBcLApSysMacAddress CISCO-LWAPP-AP-MIBcLApDot11IfSlotId cLSiApIfBandId
Column Syntax OID
cLSiApIfBandId
This object represents the band ID within the slot of a dot11
interface on an AP.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.513.1.6.1.1.4.2.1.1
cLSiApIfBandSpectrumIntelligenceEnable
This object specifies whether Spectrum Intelligence (SI) is
enabled on this band within the slot. A value of 'true' indicates SI
is enabled. A value of 'false' indicates SI is disabled.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.9.9.513.1.6.1.1.4.2.1.2
cLSiApIfBandSensordOperationalStatus
This object represents the current operational status of the SensorD.
up - Sensord operational status is in up state.
down - Sensord operational status is in down state.
na - Sensord device is not active.
Enumeration
Enumerated Values:
1up
2down
3na
 .1.3.6.1.4.1.9.9.513.1.6.1.1.4.2.1.3