cLSiD11InterferenceDeviceList

CISCO-LWAPP-SI-MIB · .1.3.6.1.4.1.9.9.513.1.6.1.1.3.1.1.3

Object

column r/w Bits

This object represents the interference device list which
would be considered for detection by controller on the
corresponding radio interface. If bit corresponding to
particular interference device category is set, if existing
in radio interface, the same would be detected and reported.
If bit corresponding to particular interference
device category is cleared, the same would not be considered
for detection and reporting, even though existing in particular
radio interface.

Context

MIB: CISCO-LWAPP-SI-MIB
OID: .1.3.6.1.4.1.9.9.513.1.6.1.1.3.1.1.3
Type: column
Access: readwrite
Status: current
Parent: cLSiDot11BandEntry
Table: cLSiDot11BandTable
Siblings: 12

Syntax

Bits

Values & Constraints

Enumerated Values

`0`	byte
`1`	byte
`2`	byte
`3`	byte
`4`	byte
`5`	byte
`6`	wifiInvalidChannel
`7`	wifiInverted
`8`	eightZeroTwoDot15dot4
`9`	videoCamera
`10`	dectLikePhone
`11`	continuousTransmitter
`12`	jammer
`13`	tddTransmitter
`14`	bluetoothDiscovery
`15`	eightZeroTwoDot11Fh
`16`	microwaveOven
`17`	bluetoothLink
`18`	bleBeacon
`19`	wifiNeighbor
`20`	wifiRogue
`21`	siFhss

Related Objects

Sibling Objects

Object	Type	Syntax	OID
cLSiD11Band This object represents the band for this entry.	column	CISCO-LWAPP-TC-MIBCLDot11Band	`.1.3.6.1.4.1.9.9.513.1.6.1.1.3.1.1.1`
cLSiD11IdrTrapDeviceList This object represents the interference device list, that are enabled to generate traps. When bit corresponding to particular interference category is set, when detected by cont…	column	Bits	`.1.3.6.1.4.1.9.9.513.1.6.1.1.3.1.1.10`
cLSiD11IdrPersistentDevicePropagation This object specifies whether first hop Persistent Device Propagation detection is enabled on this band. A value of 'true' indicates first hop PDA detection is enabled. A value …	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.9.9.513.1.6.1.1.3.1.1.11`
cLSiD11IdrUnclassifiedTrapEnable This object specifies whether trap would be set for unclassified interference category on this band. A value of 'true' indicates trap enabled. A value of 'false' indicates trap i…	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.9.9.513.1.6.1.1.3.1.1.12`
cLSiD11IdrUnclassifiedTrapThreshold This object specifies the threshold which would be considered while sending trap for unclassified interference category.	column	Unsigned32	`.1.3.6.1.4.1.9.9.513.1.6.1.1.3.1.1.13`
cLSiD11SIEnable This object specifies whether SI feature, for QCA Aps is enabled, on this band. A value of 'true' indicates SI enabled. A value of 'false' indicates SI is disabled.	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.9.9.513.1.6.1.1.3.1.1.14`
cLSiD11SpectrumIntelligenceEnable This object specifies whether Spectrum Intelligence (SI) is enabled on this band. A value of 'true' indicates SI is enabled. A value of 'false' indicates SI is disabled.	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.9.9.513.1.6.1.1.3.1.1.2`
cLSiD11PollingInterval This object specifies the AQ(Air Quality) polling period in minutes.	column	minutes Unsigned32	`.1.3.6.1.4.1.9.9.513.1.6.1.1.3.1.1.4`
cLSiD11IdrReportingEnable This object specifies whether IDR is enabled on this band. A value of 'true' indicates IDR is enabled. A value of 'false' indicates IDR is disabled.	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.9.9.513.1.6.1.1.3.1.1.6`
cLSiD11AqiTrapEnable This object specifies whether AQ notification is enabled on this band. A value of 'true' indicates AQ notification is enabled. A value of 'false' indicates AQ notification is di…	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.9.9.513.1.6.1.1.3.1.1.7`
cLSiD11AqiTrapThreshold This object specifies the trap threshold value.	column	Unsigned32	`.1.3.6.1.4.1.9.9.513.1.6.1.1.3.1.1.8`
cLSiD11IdrTrapEnable This object specifies whether Interference Device Report notification is enabled on this band. A value of 'true' indicates IDR notification is enabled. A value of 'false' indic…	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.9.9.513.1.6.1.1.3.1.1.9`