cLSiD11Band
CISCO-LWAPP-SI-MIB ·
.1.3.6.1.4.1.9.9.513.1.6.1.1.3.1.1.1
Object
column
CISCO-LWAPP-TC-MIBCLDot11Band
This object represents the band for this entry.
Context
- MIB
- CISCO-LWAPP-SI-MIB
- OID
.1.3.6.1.4.1.9.9.513.1.6.1.1.3.1.1.1- Type
- column
- Access
- noaccess
- Status
- current
- Parent
- cLSiDot11BandEntry
- Table
- cLSiDot11BandTable
- Siblings
- 12
Syntax
CISCO-LWAPP-TC-MIBCLDot11Band
- Source
- CISCO-LWAPP-TC-MIBCLDot11Band
- Base type
Enumeration
Values & Constraints
Type Values
1 | band2dot4 |
2 | band5 |
3 | maui-6ghz |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cLSiD11IdrTrapDeviceList This object represents the interference device list,
that are enabled to generate traps. When bit corresponding
to particular interference category is set, when detected
by cont… | column | Bits | .1.3.6.1.4.1.9.9.513.1.6.1.1.3.1.1.10 |
| cLSiD11IdrPersistentDevicePropagation This object specifies whether first hop Persistent Device Propagation
detection is enabled on this band.
A value of 'true' indicates first hop PDA detection is
enabled.
A value … | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.513.1.6.1.1.3.1.1.11 |
| cLSiD11IdrUnclassifiedTrapEnable This object specifies whether trap would be set for unclassified
interference category on this band. A value of 'true' indicates trap
enabled. A value of 'false' indicates trap i… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.513.1.6.1.1.3.1.1.12 |
| cLSiD11IdrUnclassifiedTrapThreshold This object specifies the threshold which would be considered
while sending trap for unclassified interference category. | column | Unsigned32 | .1.3.6.1.4.1.9.9.513.1.6.1.1.3.1.1.13 |
| cLSiD11SIEnable This object specifies whether SI feature, for QCA Aps is enabled,
on this band.
A value of 'true' indicates SI enabled. A value of 'false'
indicates SI is disabled. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.513.1.6.1.1.3.1.1.14 |
| cLSiD11SpectrumIntelligenceEnable This object specifies whether Spectrum Intelligence (SI) is
enabled on this band. A value of 'true' indicates SI
is enabled. A value of 'false' indicates SI is disabled. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.513.1.6.1.1.3.1.1.2 |
| cLSiD11InterferenceDeviceList This object represents the interference device list which
would be considered for detection by controller on the
corresponding radio interface. If bit corresponding to
particular … | column | Bits | .1.3.6.1.4.1.9.9.513.1.6.1.1.3.1.1.3 |
| cLSiD11PollingInterval This object specifies the AQ(Air Quality) polling period in minutes. | column | minutes Unsigned32 | .1.3.6.1.4.1.9.9.513.1.6.1.1.3.1.1.4 |
| cLSiD11IdrReportingEnable This object specifies whether IDR is enabled on this band.
A value of 'true' indicates IDR is enabled. A value of 'false'
indicates IDR is disabled. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.513.1.6.1.1.3.1.1.6 |
| cLSiD11AqiTrapEnable This object specifies whether AQ notification is enabled
on this band. A value of 'true' indicates AQ notification
is enabled. A value of 'false' indicates AQ notification is
di… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.513.1.6.1.1.3.1.1.7 |
| cLSiD11AqiTrapThreshold This object specifies the trap threshold value. | column | Unsigned32 | .1.3.6.1.4.1.9.9.513.1.6.1.1.3.1.1.8 |
| cLSiD11IdrTrapEnable This object specifies whether Interference Device Report notification
is enabled on this band.
A value of 'true' indicates IDR notification
is enabled.
A value of 'false' indic… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.513.1.6.1.1.3.1.1.9 |