CISCO-LWAPP-EXT-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view

Tables

Rows

Columns

clExtIfTable

table

.1.3.6.1.4.1.9.9.9998.1.1.2.1 · 1 row entry · 2 columns

Open in standard view

A list of interface entries.  The number of entries
is given by the value of ifNumber.

clExtIfEntry entry .1.3.6.1.4.1.9.9.9998.1.1.2.1.1

An entry containing management information applicable
to a particular interface.

Indexes

IF-MIBifIndex

Column	Syntax	OID
clExtIfSpeed An estimate of the interface's current bandwidth in million bits per second. For interfaces which do not vary in bandwidth or for those where no accurate estimation can be made, this object should contain the nominal b…	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.9.9.9998.1.1.2.1.1.1`
clExtIfSinceLastChange The value of time duration since the time the interface entered its current operational state. If the current time is prior to the last updating of the local network management subsystem, then this object contains a ze…	SNMPv2-SMITimeTicks Textual Convention: SNMPv2-SMITimeTicks `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.9.9.9998.1.1.2.1.1.2`

clExtApTable

table

.1.3.6.1.4.1.9.9.9998.1.1.3.1 · 1 row entry · 9 columns

Open in standard view

This table represents the information about the
802.11 LWAPP Access Points that have joined the
controller.
          
LWAPP APs exchange configuration messages with the
controller and get the required configuration for
their 802.11 related operations, after they join the
controller.

clExtApEntry entry .1.3.6.1.4.1.9.9.9998.1.1.3.1.1

Each entry in this table provides information about
one 802.11 LWAPP Access Point that has joined the
controller.

Entries are removed when the APs lose their
association with the controller due to loss
of c…

Indexes

CISCO-LWAPP-AP-MIBcLApSysMacAddress

Column Syntax OID

clExtApRealTimeStatsModeEnabled

This object specifies whether currently stats mode is 'realtime'.
There are two stats-mode, realtime and normal, that specifies the
stats-timer range to be 10-180 sec and 2-5 sec each. Set to on
if current mode is realt…

CLSwitchr/w

Textual Convention: CLSwitch Enumeration

Type Values:

0	off
1	on

.1.3.6.1.4.1.9.9.9998.1.1.3.1.1.1

clExtApMonitorMode

This object specifies the monitor mode of AP.
monitor : no client can connect.
normal : no monitor function at all.
semimonitor : AP can monitor it's working radio while clients connected.
The mapping between clExtApM…

Enumerationr/w

Enumerated Values:

0	normal
1	monitor
2	semimonitor

.1.3.6.1.4.1.9.9.9998.1.1.3.1.1.2

clExtApSysManufacture

This object specifies the AP manufacture.

SNMP-FRAMEWORK-MIBSnmpAdminString

Textual Convention: SNMP-FRAMEWORK-MIBSnmpAdminString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.9.9.9998.1.1.3.1.1.3

clExtApSysSoftwareName

This object specifies the AP software name.

SNMP-FRAMEWORK-MIBSnmpAdminString

Textual Convention: SNMP-FRAMEWORK-MIBSnmpAdminString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.9.9.9998.1.1.3.1.1.4

clExtApSysSoftwareVersion

This object specifies the AP software version.

SNMP-FRAMEWORK-MIBSnmpAdminString

Textual Convention: SNMP-FRAMEWORK-MIBSnmpAdminString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.9.9.9998.1.1.3.1.1.5

clExtApSysSoftwareVendor

This object specifies the AP software vendor.

SNMP-FRAMEWORK-MIBSnmpAdminString

Textual Convention: SNMP-FRAMEWORK-MIBSnmpAdminString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.9.9.9998.1.1.3.1.1.6

clExtApQosMinBandwidth

This object specifies the minimum bandwidth for QOS on the AP.
It is measured by Mbps.

Integer32r/w

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.9.9.9998.1.1.3.1.1.7

clExtApTotalPhyInterfaceCount

This object specifies the total wired physical interface
count for the Access Points that have joined the controller.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.9.9.9998.1.1.3.1.1.8

clExtApName

This object represents the administrative name
assigned to the AP by the user. If an AP is not configured,
its factory default name will be ap:<last three byte
of MACAddress> eg. ap:af:12:be.

SNMP-FRAMEWORK-MIBSnmpAdminStringr/w

Textual Convention: SNMP-FRAMEWORK-MIBSnmpAdminString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.9.9.9998.1.1.3.1.1.9

clExtApDot11IfTable

table

.1.3.6.1.4.1.9.9.9998.1.1.3.2 · 1 row entry · 9 columns

Open in standard view

This table represents the information about the
basic functional parameters corresponding to
the dot11 interfaces of the APs that have joined
the controller.

clExtApDot11IfEntry entry .1.3.6.1.4.1.9.9.9998.1.1.3.2.1

An entry in this table represents the 802.11
functional parameters of the dot11 interface of
an AP that has joined the controller.

Entries are added when the APs associate to this
controller and deleted whe…

Indexes

CISCO-LWAPP-AP-MIBcLApSysMacAddress CISCO-LWAPP-AP-MIBcLApDot11IfSlotId

Column Syntax OID

clExtAp11nChannelBandwidth

This object indicates the channel bandwidth for
this AP. This applies to 802.11n networks only.

mhzEnumerationr/w

Enumerated Values:

1	forty
2	twenty

.1.3.6.1.4.1.9.9.9998.1.1.3.2.1.1

clExtApDot11IfIANAType

This object represents the type of this interface.
The value of the type is defined by IANA.

IANAifType-MIBIANAifType

Textual Convention: IANAifType-MIBIANAifType Enumeration

Type Values:

1	other
2	regular1822
3	hdh1822
4	ddnX25
5	rfc877x25
6	ethernetCsmacd
7	iso88023Csmacd
8	iso88024TokenBus
9	iso88025TokenRing
10	iso88026Man
11	starLan
12	proteon10Mbit
13	proteon80Mbit
14	hyperchannel
15	fddi
16	lapb
17	sdlc
18	ds1
19	e1
20	basicISDN
21	primaryISDN
22	propPointToPointSerial
23	ppp
24	softwareLoopback
25	eon
26	ethernet3Mbit
27	nsip
28	slip
29	ultra
30	ds3
31	sip
32	frameRelay
33	rs232
34	para
35	arcnet
36	arcnetPlus
37	atm
38	miox25
39	sonet
40	x25ple
41	iso88022llc
42	localTalk
43	smdsDxi
44	frameRelayService
45	v35
46	hssi
47	hippi
48	modem
49	aal5
50	sonetPath
51	sonetVT
52	smdsIcip
53	propVirtual
54	propMultiplexor
55	ieee80212
56	fibreChannel
57	hippiInterface
58	frameRelayInterconnect
59	aflane8023
60	aflane8025
61	cctEmul
62	fastEther
63	isdn
64	v11
65	v36
66	g703at64k
67	g703at2mb
68	qllc
69	fastEtherFX
70	channel
71	ieee80211
72	ibm370parChan
73	escon
74	dlsw
75	isdns
76	isdnu
77	lapd
78	ipSwitch
79	rsrb
80	atmLogical
81	ds0
82	ds0Bundle
83	bsc
84	async
85	cnr
86	iso88025Dtr
87	eplrs
88	arap
89	propCnls
90	hostPad
91	termPad
92	frameRelayMPI
93	x213
94	adsl
95	radsl
96	sdsl
97	vdsl
98	iso88025CRFPInt
99	myrinet
100	voiceEM
101	voiceFXO
102	voiceFXS
103	voiceEncap
104	voiceOverIp
105	atmDxi
106	atmFuni
107	atmIma
108	pppMultilinkBundle
109	ipOverCdlc
110	ipOverClaw
111	stackToStack
112	virtualIpAddress
113	mpc
114	ipOverAtm
115	iso88025Fiber
116	tdlc
117	gigabitEthernet
118	hdlc
119	lapf
120	v37
121	x25mlp
122	x25huntGroup
123	transpHdlc
124	interleave
125	fast
126	ip
127	docsCableMaclayer
128	docsCableDownstream
129	docsCableUpstream
130	a12MppSwitch
131	tunnel
132	coffee
133	ces
134	atmSubInterface
135	l2vlan
136	l3ipvlan
137	l3ipxvlan
138	digitalPowerline
139	mediaMailOverIp
140	dtm
141	dcn
142	ipForward
143	msdsl
144	ieee1394
145	if-gsn
146	dvbRccMacLayer
147	dvbRccDownstream
148	dvbRccUpstream
149	atmVirtual
150	mplsTunnel
151	srp
152	voiceOverAtm
153	voiceOverFrameRelay
154	idsl
155	compositeLink
156	ss7SigLink
157	propWirelessP2P
158	frForward
159	rfc1483
160	usb
161	ieee8023adLag
162	bgppolicyaccounting
163	frf16MfrBundle
164	h323Gatekeeper
165	h323Proxy
166	mpls
167	mfSigLink
168	hdsl2
169	shdsl
170	ds1FDL
171	pos
172	dvbAsiIn
173	dvbAsiOut
174	plc
175	nfas
176	tr008
177	gr303RDT
178	gr303IDT
179	isup
180	propDocsWirelessMaclayer
181	propDocsWirelessDownstream
182	propDocsWirelessUpstream
183	hiperlan2
184	propBWAp2Mp
185	sonetOverheadChannel
186	digitalWrapperOverheadChannel
187	aal2
188	radioMAC
189	atmRadio
190	imt
191	mvl
192	reachDSL
193	frDlciEndPt
194	atmVciEndPt
195	opticalChannel
196	opticalTransport
197	propAtm
198	voiceOverCable
199	infiniband
200	teLink
201	q2931
202	virtualTg
203	sipTg
204	sipSig
205	docsCableUpstreamChannel
206	econet
207	pon155
208	pon622
209	bridge
210	linegroup
211	voiceEMFGD
212	voiceFGDEANA
213	voiceDID
214	mpegTransport
215	sixToFour
216	gtp
217	pdnEtherLoop1
218	pdnEtherLoop2
219	opticalChannelGroup
220	homepna
221	gfp
222	ciscoISLvlan
223	actelisMetaLOOP
224	fcipLink
225	rpr
226	qam
227	lmp
228	cblVectaStar
229	docsCableMCmtsDownstream
230	adsl2
231	macSecControlledIF
232	macSecUncontrolledIF
233	aviciOpticalEther
234	atmbond
235	voiceFGDOS
236	mocaVersion1
237	ieee80216WMAN
238	adsl2plus
239	dvbRcsMacLayer
240	dvbTdm
241	dvbRcsTdma
242	x86Laps
243	wwanPP
244	wwanPP2
245	voiceEBS
246	ifPwType
247	ilan
248	pip
249	aluELP
250	gpon
251	vdsl2
252	capwapDot11Profile
253	capwapDot11Bss
254	capwapWtpVirtualRadio
255	bits
256	docsCableUpstreamRfPort
257	cableDownstreamRfPort
258	vmwareVirtualNic
259	ieee802154
260	otnOdu
261	otnOtu
262	ifVfiType
263	g9981
264	g9982
265	g9983
266	aluEpon
267	aluEponOnu
268	aluEponPhysicalUni
269	aluEponLogicalLink
270	aluGponOnu
271	aluGponPhysicalUni
272	vmwareNicTeam
277	docsOfdmDownstream
278	docsOfdmaUpstream
279	gfast
280	sdci
281	xboxWireless
282	fastdsl
283	docsCableScte55d1FwdOob
284	docsCableScte55d1RetOob
285	docsCableScte55d2DsOob
286	docsCableScte55d2UsOob
287	docsCableNdf
288	docsCableNdr
289	ptm
290	ghn
291	otnOtsi
292	otnOtuc
293	otnOduc
294	otnOtsig
295	microwaveCarrierTermination
296	microwaveRadioLinkTerminal
297	ieee8021axDrni
298	ax25
299	ieee19061nanocom
300	cpri
301	omni
302	roe
303	p2pOverLan

.1.3.6.1.4.1.9.9.9998.1.1.3.2.1.2

clExtApIfPhyChannelAssignment

If this value is on, then bsnAPDot11CurrentChannel in
bsnAPIfDot11PhyDSSSTable is assigned by dynamic
algorithm and is read-only.

CLSwitchr/w

Textual Convention: CLSwitch Enumeration

Type Values:

0	off
1	on

.1.3.6.1.4.1.9.9.9998.1.1.3.2.1.3

clExtApDot11RadioStatsRxByteCount

This object represents the total bytes of
packets received on the radio.

bytesSNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.9.9.9998.1.1.3.2.1.4

clExtApDot11RadioStatsTxByteCount

This object represents the total bytes of
packets transmitted on the radio.

bytesSNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.9.9.9998.1.1.3.2.1.5

clExtApDot11WirelessModeSupported

This object represents wireless mode supported.

bit 0 - dot11a
bit 1 - dot11b
bit 2 - dot11g
bit 3 - dot11an
bit 4 - dot11gn

AP can support wireless multi-mode, the value can follow the exa…

Integer32

Constraints:
range: 0-31

.1.3.6.1.4.1.9.9.9998.1.1.3.2.1.6

clExtApDot11IfAdminStatus

This object represents the AP's interface administrational
status.

Enumerationr/w

Enumerated Values:

1	up
2	down
3	testing

.1.3.6.1.4.1.9.9.9998.1.1.3.2.1.7

clExtApDot11IfOperStatus

This object represents the AP's wireless interface current operational
status.

Enumeration

Enumerated Values:

1	up
2	down
3	testing
4	admindown

.1.3.6.1.4.1.9.9.9998.1.1.3.2.1.8

cLExtAPDot11IfRTSThreshold

This object represents RTS threshold value.

Integer32r/w

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.9.9.9998.1.1.3.2.1.9

clExtApDot11RadioStatsTable

table

.1.3.6.1.4.1.9.9.9998.1.1.3.3 · 1 row entry · 3 columns

Open in standard view

This table represents the statistics information
about the radios of the APs that have joined the
controller.

clExtApDot11RadioStatsEntry entry .1.3.6.1.4.1.9.9.9998.1.1.3.3.1

An entry in this table represents a statistics of
the radio of an AP that has joined the conttroller.

Entries are added when the APs associate to this
controller and deleted when they lose their
association.

Indexes

CISCO-LWAPP-AP-MIBcLApSysMacAddress CISCO-LWAPP-AP-MIBcLApDot11IfSlotId

Column	Syntax	OID
clExtApDot11RadioStatsRetryFrameCount This object represents the total number of downstream retry frames on the radio.	framesSNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.9.9.9998.1.1.3.3.1.1`
clExtApDot11RadioStatsRetryPacketCount This object represents the total number of downstream retry packets on the radio.	packetsSNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.9.9.9998.1.1.3.3.1.2`
clExtApDot11RadioStatsRxErrorPacketCount This object represents the total number of received error packets on the radio .	packetsSNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.9.9.9998.1.1.3.3.1.3`

clExtApEthernetIfTable

table

.1.3.6.1.4.1.9.9.9998.1.1.3.4 · 1 row entry · 5 columns

Open in standard view

This table represents the information about the
basic functional parameters corresponding to
the Ethernet interfaces of the APs that have joined
the controller.

clExtApEthernetIfEntry entry .1.3.6.1.4.1.9.9.9998.1.1.3.4.1

An entry in this table represents the functional
parameters of the Ethernet interface of an AP that
has joined the controller.

Entries are added when the APs associate to this
controller and deleted when th…

Indexes

CISCO-LWAPP-AP-MIBcLApSysMacAddress CISCO-LWAPP-AP-MIBcLApEthernetIfSlotId

Column Syntax OID

clExtApEthernetIfOperStatus

This object represents the operational state
of the physical Ethernet interface on the AP.

Enumeration

Enumerated Values:

1	up
2	down
3	testing
4	admindown

.1.3.6.1.4.1.9.9.9998.1.1.3.4.1.1

clExtApEthernetIfRxBcastPkts

This object represents total number of
broadcast packets received on the interface

packetsSNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.9.9.9998.1.1.3.4.1.2

clExtApEthernetIfRxMcastPkts

This object represents total number of
multicast packets received on the interface

packetsSNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.9.9.9998.1.1.3.4.1.3

clExtApEthernetIfTxBcastPkts

This object represents total number of
broadcast packets transmitted on the interface

packetsSNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.9.9.9998.1.1.3.4.1.4

clExtApEthernetIfTxMcastPkts

This object represents total number of
multicast packets transmitted on the interface

packetsSNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.9.9.9998.1.1.3.4.1.5

cLApOperationInfoTable

table

.1.3.6.1.4.1.9.9.9998.1.1.3.5 · 1 row entry · 2 columns

Open in standard view

This table represents the operation information 
for each AP.

cLApOperationInfoEntry entry .1.3.6.1.4.1.9.9.9998.1.1.3.5.1

Each entry in this table provides operation
information for each AP.

Indexes

cLApOperationSysMacAddress

Column Syntax OID

cLApOperationSysMacAddress

This object specifies the AP mac address.

.1.3.6.1.4.1.9.9.9998.1.1.3.5.1.1

cLApOperationStatus

This object represents operation status of each ap.

Enumeration

Enumerated Values:

0	disassociated
1	associated

.1.3.6.1.4.1.9.9.9998.1.1.3.5.1.2

clExtWlanConfigTable

table

.1.3.6.1.4.1.9.9.9998.1.1.4.1 · 1 row entry · 12 columns

Open in standard view

This table represents the WLAN configuration sent by
the controller to the LWAPP APs for their operation.
          
LWAPP APs exchange configuration messages with the
controller and get the required configuration for
their 802.11 related operations.  As part of these
messages, the WLAN configuration is pushed by the
controller to the LWAPP APs.
          
Rows are added or deleted by explicit
management actions initiated by the user from a
network management station through the
cLWlanRowStatus object.

clExtWlanConfigEntry entry .1.3.6.1.4.1.9.9.9998.1.1.4.1.1

Each entry in this table represents the WLAN
configuration sent by the controller to LWAPP APs
for use during their operations. entries can be
added/deleted by explicit management actions by
NMS or by user console

Indexes

CISCO-LWAPP-WLAN-MIBcLWlanIndex

Column Syntax OID

clExtWlanAdminStatus

Administrative Status of ESS(WLAN). By disabling an
ESS the corresponding SSID is no longer broadcasted
in AP beacons.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.9.9.9998.1.1.4.1.1.1

clExtWlanBroadcastSsidEnable

This attribute when enabled allows the switch to
broadcast this SSID and when disabled doesn't allow that.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.9.9.9998.1.1.4.1.1.2

clExtWlanLoadBalancingMode

This object indicates the load balancing mode enabled
on the controller for this WLAN . A value of 'none'
indicates Load Balance is turned off for this Wlan.
A value of 'clientCount' indicates load balance is based
on A…

Enumerationr/w

Enumerated Values:

0	none
1	uplinkUsage
2	clientCount

.1.3.6.1.4.1.9.9.9998.1.1.4.1.1.3

clExtWlanP2PBlocking

This object represents per WLAN peer-to-peer
blocking behavior on controller. Peer-to-peer
blocking means traffic between two clients on
same VLAN will not be bridged.

false : Peer-…

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.9.9.9998.1.1.4.1.1.4

clExtWlanSecurityAuthType

This object represents per WLAN type
of 802.11 Authentication.
authOpen : The WLAN uses open authentication method
authSharedKey : The WLAN uses shared authentication method
authCiscoLeap : The WLAN uses CIS…

Enumerationr/w

Enumerated Values:

0	authOpen
1	authSharedKey
128	authCiscoLeap

.1.3.6.1.4.1.9.9.9998.1.1.4.1.1.5

clExtWlanDot11Auth

This object allows the user to configure
802.11 Authentication.

Enumerationr/w

Enumerated Values:

0	opensystem
1	sharekey

.1.3.6.1.4.1.9.9.9998.1.1.4.1.1.6

clExtWlanSecurity

This object allows the user to configure
the security type in frame.

Enumerationr/w

Enumerated Values:

0	none
1	wpa
2	wpa2
3	wapi

.1.3.6.1.4.1.9.9.9998.1.1.4.1.1.7

clExtWlanAuthenMode

This object allows the user to configure
the authentication mode.

Enumerationr/w

Enumerated Values:

0	none
1	psk
2	radius
3	wapi-cer

.1.3.6.1.4.1.9.9.9998.1.1.4.1.1.8

clExtWlanSecurityCiphers

This object allows the user to configure
encryption mode.

Enumerationr/w

Enumerated Values:

0	none
1	wep40
2	wep104
3	tkip
4	aesccmp
5	wpi-sms4

.1.3.6.1.4.1.9.9.9998.1.1.4.1.1.9

clExtWepCipherKeyIndex

This object represents the key index of WEP.
According to 802.11 standard 4 keys are supported.
So 802.11 Mobile Stations(Client) can have upto 4
keys. This index is for informing Mobile Station
which key it should use…

Integer32r/w

Constraints:
range: 1-4

.1.3.6.1.4.1.9.9.9998.1.1.4.1.1.10

clExtWepCipherKeyValue

This object represents the key value of WEP.
For wep104 encryption either 26 bit hex key or
13 bit ascii key should be specified.
For wep40 encryption 10 bit hex key or 5 bit
ascii key should be specified.

OctetStringr/w

Constraints:
range: 5-26

.1.3.6.1.4.1.9.9.9998.1.1.4.1.1.11

clExtWepCipherKeyCharType

This object represents the key type of WEP.
Length of key specified in Key depends on this attribute.

Enumerationr/w

Enumerated Values:

1	default
2	hex
3	ascii

.1.3.6.1.4.1.9.9.9998.1.1.4.1.1.12

clExtClientTable

table

.1.3.6.1.4.1.9.9.9998.1.1.5.1 · 1 row entry · 6 columns

Open in standard view

This table represents the 802.11 wireless clients 
that are associated with the APs that have joined 
this controller.
An entry is created automatically by the controller 
when the client gets associated to the AP. An existing
entry gets deleted when the association gets dropped.
Each client added to this table is uniquely identified
by the client's MAC address.

clExtClientEntry entry .1.3.6.1.4.1.9.9.9998.1.1.5.1.1

Each entry represents a conceptual row in this
table and provides the information about the
clients associated to the APs that have joined
the controller. An entry is identified the client's
MAC address.

Indexes

CISCO-LWAPP-DOT11-CLIENT-MIBcldcClientMacAddress

Column Syntax OID

clExtClientProtocol

The 802.11 protocol type of the client.
'dot11a' - The client is using 802.11a standard
to connect to the access point (AP)
'dot11b' - The client is using 802.11b standard
to connect to t…

Enumeration

Enumerated Values:

1	dot11a
2	dot11b
4	dot11g
8	dot11n5
16	dot11n24

.1.3.6.1.4.1.9.9.9998.1.1.5.1.1.1

clExtClientPowerSaveMode

This object indicates the power management mode of the client.
The possible two modes are:
active(0) - this client is not in power-save mode
and it is actively sending or receiving
data.…

Enumeration

Enumerated Values:

0	active
1	powersave

.1.3.6.1.4.1.9.9.9998.1.1.5.1.1.2

clExtClientUpTime

This object indicates the duration for which the client has
been associated with this device.

SNMPv2-SMITimeTicks

Textual Convention: SNMPv2-SMITimeTicks Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.9.9.9998.1.1.5.1.1.3

clExtClientAuthFailReason

This object specifies the reason of the client authentication failure.

SNMPv2-TCDisplayString

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.9.9.9998.1.1.5.1.1.5

clExtClientRxThroughput

This object indicates the receiving throughput which expressing a instantaneous throughput of the bytes
received by the client over last time slot.

bit/sSNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.9.9.9998.1.1.5.1.1.6

clExtClientTxThroughput

This object indicates the transmitting throughput which expressing a instantaneous throughput of the bytes
transmitted by the client over last time slot.

bit/sSNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.9.9.9998.1.1.5.1.1.7

clExtHtMacOperationsTable

table

.1.3.6.1.4.1.9.9.9998.1.1.6.1 · 1 row entry · 2 columns

Open in standard view

This table represents the operational parameters
at the MAC layer for the 802.11n networks managed 
through the controller. An agent adds an entry to 
this table for every 802.11n band on startup.

clExtHtMacOperationsEntry entry .1.3.6.1.4.1.9.9.9998.1.1.6.1.1

Each entry represents the operational parameters
at the MAC layer for 802.11n networks.

Indexes

CISCO-LWAPP-DOT11-MIBcldHtDot11nBand

Column Syntax OID

clExtHtDot11nAmpduEnable

This object is used to indicate the support for 802.11n
A-MPDU on this band. A value of 'on' indicates that
A-MPDU is enabled for this band. A value of 'off'
indicates that A-MPDU is disabled for this band.

CLSwitchr/w

Textual Convention: CLSwitch Enumeration

Type Values:

0	off
1	on

.1.3.6.1.4.1.9.9.9998.1.1.6.1.1.1

clExtHtDot11nGuardIntervalEnable

This object is used to indicate the support for 802.11n
guard interval on this band. A value of 'on' indicates
that guard interval is enabled for this band. A value of
'off' indicates that guard interval is disabled for…

CLSwitchr/w

Textual Convention: CLSwitch Enumeration

Type Values:

0	off
1	on

.1.3.6.1.4.1.9.9.9998.1.1.6.1.1.2

clExtRFProfileTable

table

.1.3.6.1.4.1.9.9.9998.1.1.7.1 · 1 row entry · 1 columns

Open in standard view

This table lists the configuration for each
RF profile.

clExtRFProfileEntry entry .1.3.6.1.4.1.9.9.9998.1.1.7.1.1

An entry containing the configuration attributes
that affect the operation of 802.11 RF domain.

Entries can be added/deleted by explicit management
action from NMS/EMS or through user console.

Indexes

CISCO-LWAPP-RF-MIBcLRFProfileName

Column	Syntax	OID
clExtRFProfileWirelessMode This object represents wireless mode configuration. bit 0 - dot11a bit 1 - dot11b bit 2 - dot11g bit 3 - dot11an bit 4 - dot11gn AP can support wireless multi-mode, the value can follow the…	Unsigned32r/w Constraints: `range: 0-31`	`.1.3.6.1.4.1.9.9.9998.1.1.7.1.1.1`

clExtAbnormalOfflineClientOnSecurityTypeTable

table

.1.3.6.1.4.1.9.9.9998.1.1.8.1 · 1 row entry · 2 columns

Open in standard view

This table lists the abnormal offline clients for the required 
security type.

clExtAbnormalOfflineClientOnSecurityTypeEntry entry .1.3.6.1.4.1.9.9.9998.1.1.8.1.1

Each entry in this table represents the abnormal
offline counter based on security type.

Indexes

clExtSecurityType

Column Syntax OID

clExtSecurityType

This object represents the client security type.
open : The client uses open authentication method
wepPsk : The client uses WEP/PSK authentication method
peapSim : The client uses PEAP/SIM authenticati…

Enumeration

Enumerated Values:

1	open
2	wepPsk
3	peapSim
4	webAuth

.1.3.6.1.4.1.9.9.9998.1.1.8.1.1.1

clExtAbnormalOfflineClientCount

This object represents the current abnormal offline clients
based on security type on the controller.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.9.9.9998.1.1.8.1.1.2