clExtWlanP2PBlocking

CISCO-LWAPP-EXT-MIB · .1.3.6.1.4.1.9.9.9998.1.1.4.1.1.4
MIB view Table view

Object

column r/w SNMPv2-TCTruthValue 
This object represents per WLAN peer-to-peer
blocking behavior on controller. Peer-to-peer     
blocking means traffic between two clients on     
same VLAN will not be bridged.     
              
    false     : Peer-to-peer blocking is disabled     
                and traffic is bridged locally     
                within the controller.     
    true      : The packet will be discarded or     
                be forwarded on the upstream VLAN.     
                If it is forwarded on the upstream
                VLAN, the device 'north' of the controller     
                can then make the decision about     
                decision about what to do with the     
                packet.

Context

MIB
CISCO-LWAPP-EXT-MIB
OID
.1.3.6.1.4.1.9.9.9998.1.1.4.1.1.4
Type
column
Access
readwrite
Status
current
Parent
clExtWlanConfigEntry
Table
clExtWlanConfigTable
Siblings
11

Syntax

SNMPv2-TCTruthValue
Source
SNMPv2-TCTruthValue
Base type
Enumeration

Values & Constraints

Type Values
1true
2false

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
clExtWlanAdminStatus
Administrative Status of ESS(WLAN). By disabling an ESS the corresponding SSID is no longer broadcasted in AP beacons.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.9.9.9998.1.1.4.1.1.1
clExtWepCipherKeyIndex
This object represents the key index of WEP. According to 802.11 standard 4 keys are supported. So 802.11 Mobile Stations(Client) can have upto 4 keys. This index is for informin…
columnInteger32.1.3.6.1.4.1.9.9.9998.1.1.4.1.1.10
clExtWepCipherKeyValue
This object represents the key value of WEP. For wep104 encryption either 26 bit hex key or 13 bit ascii key should be specified. For wep40 encryption 10 bit hex key or 5 bit …
columnOctetString.1.3.6.1.4.1.9.9.9998.1.1.4.1.1.11
clExtWepCipherKeyCharType
This object represents the key type of WEP. Length of key specified in Key depends on this attribute.
columnEnumeration.1.3.6.1.4.1.9.9.9998.1.1.4.1.1.12
clExtWlanBroadcastSsidEnable
This attribute when enabled allows the switch to broadcast this SSID and when disabled doesn't allow that.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.9.9.9998.1.1.4.1.1.2
clExtWlanLoadBalancingMode
This object indicates the load balancing mode enabled on the controller for this WLAN . A value of 'none' indicates Load Balance is turned off for this Wlan. A value of 'clientCou…
columnEnumeration.1.3.6.1.4.1.9.9.9998.1.1.4.1.1.3
clExtWlanSecurityAuthType
This object represents per WLAN type of 802.11 Authentication. authOpen : The WLAN uses open authentication method authSharedKey : The WLAN uses shared authentication me…
columnEnumeration.1.3.6.1.4.1.9.9.9998.1.1.4.1.1.5
clExtWlanDot11Auth
This object allows the user to configure 802.11 Authentication.
columnEnumeration.1.3.6.1.4.1.9.9.9998.1.1.4.1.1.6
clExtWlanSecurity
This object allows the user to configure the security type in frame.
columnEnumeration.1.3.6.1.4.1.9.9.9998.1.1.4.1.1.7
clExtWlanAuthenMode
This object allows the user to configure the authentication mode.
columnEnumeration.1.3.6.1.4.1.9.9.9998.1.1.4.1.1.8
clExtWlanSecurityCiphers
This object allows the user to configure encryption mode.
columnEnumeration.1.3.6.1.4.1.9.9.9998.1.1.4.1.1.9