clExtWlanSecurityAuthType
CISCO-LWAPP-EXT-MIB ·
.1.3.6.1.4.1.9.9.9998.1.1.4.1.1.5
Object
column
r/w
Enumeration
This object represents per WLAN type
of 802.11 Authentication.
authOpen : The WLAN uses open authentication method
authSharedKey : The WLAN uses shared authentication method
authCiscoLeap : The WLAN uses CISCO LEAP authentication
method
Context
- MIB
- CISCO-LWAPP-EXT-MIB
- OID
.1.3.6.1.4.1.9.9.9998.1.1.4.1.1.5- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- clExtWlanConfigEntry
- Table
- clExtWlanConfigTable
- Siblings
- 11
Syntax
Enumeration
Values & Constraints
Enumerated Values
0 | authOpen |
1 | authSharedKey |
128 | authCiscoLeap |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| clExtWlanAdminStatus Administrative Status of ESS(WLAN). By disabling an
ESS the corresponding SSID is no longer broadcasted
in AP beacons. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.9998.1.1.4.1.1.1 |
| clExtWepCipherKeyIndex This object represents the key index of WEP.
According to 802.11 standard 4 keys are supported.
So 802.11 Mobile Stations(Client) can have upto 4
keys. This index is for informin… | column | Integer32 | .1.3.6.1.4.1.9.9.9998.1.1.4.1.1.10 |
| clExtWepCipherKeyValue This object represents the key value of WEP.
For wep104 encryption either 26 bit hex key or
13 bit ascii key should be specified.
For wep40 encryption 10 bit hex key or 5 bit
… | column | OctetString | .1.3.6.1.4.1.9.9.9998.1.1.4.1.1.11 |
| clExtWepCipherKeyCharType This object represents the key type of WEP.
Length of key specified in Key depends on this attribute. | column | Enumeration | .1.3.6.1.4.1.9.9.9998.1.1.4.1.1.12 |
| clExtWlanBroadcastSsidEnable This attribute when enabled allows the switch to
broadcast this SSID and when disabled doesn't allow that. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.9998.1.1.4.1.1.2 |
| clExtWlanLoadBalancingMode This object indicates the load balancing mode enabled
on the controller for this WLAN . A value of 'none'
indicates Load Balance is turned off for this Wlan.
A value of 'clientCou… | column | Enumeration | .1.3.6.1.4.1.9.9.9998.1.1.4.1.1.3 |
| clExtWlanP2PBlocking This object represents per WLAN peer-to-peer
blocking behavior on controller. Peer-to-peer
blocking means traffic between two clients on
same VLAN will not be bridged. … | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.9998.1.1.4.1.1.4 |
| clExtWlanDot11Auth This object allows the user to configure
802.11 Authentication. | column | Enumeration | .1.3.6.1.4.1.9.9.9998.1.1.4.1.1.6 |
| clExtWlanSecurity This object allows the user to configure
the security type in frame. | column | Enumeration | .1.3.6.1.4.1.9.9.9998.1.1.4.1.1.7 |
| clExtWlanAuthenMode This object allows the user to configure
the authentication mode. | column | Enumeration | .1.3.6.1.4.1.9.9.9998.1.1.4.1.1.8 |
| clExtWlanSecurityCiphers This object allows the user to configure
encryption mode. | column | Enumeration | .1.3.6.1.4.1.9.9.9998.1.1.4.1.1.9 |