CISCO-LECS-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
9
Rows
9
Columns
49

lecsTable

table
.1.3.6.1.4.1.9.9.38.1.1.1 · 1 row entry · 11 columns
Open in standard view 
The  (conceptual)   table containing  the   interface
specific information   of  the LECS  on   a particular
device and its associated statistics for that interface.
lecsEntry entry .1.3.6.1.4.1.9.9.38.1.1.1.1
An entry (conceptual row) in the lecsTable,
containing information of a LECS for a particular
interface. Note that deleting an entry will have the
side effect of deleting corresponding entries in the
…
Indexes
IF-MIBifIndex
Column Syntax OID
lecsConfigTableName
The textual name used to identify a configuration
table in use by the designated LECS. Note that this
value must be a reference to an entry in the
lecsConfigTblTable.
OctetStringr/w
Constraints:
range: 1-32
 .1.3.6.1.4.1.9.9.38.1.1.1.1.1
lecsUpTime
The value of sysUpTime when this entry was created.
Note that changing the value of the lecsAdminStatus
will not affect the value of this object. This object
is only set at row creation time ( whether it is from
e…
SNMPv2-TCTimeStamp
Textual Convention: SNMPv2-TCTimeStamp Unsigned32
 .1.3.6.1.4.1.9.9.38.1.1.1.1.2
lecsInConfigReqs
The number of LE_CONFIGURE_REQUESTs that have been
received by this LECS on this designated interface.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.38.1.1.1.1.3
lecsInConfigErrors
Then number of packets sent to the LECS from the
lower layers but which were not correctly formatted
configure requests.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.38.1.1.1.1.4
lecsOutConfigFails
The number of LE_CONFIGURE_RESPONSEs sent by this
particular LECS whose status was other than success.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.38.1.1.1.1.5
lecsLastFailCause
The cause for rejection of the last
LE_CONFIGURE_REQUEST. This will be the value of the
status field that was sent in the rejection
LE_CONFIGURE_RESPONSE. If the config server has never
is…
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.9.38.1.1.1.1.6
lecsLastFailLec
The ATM address of the LE client whose last
configuration request was rejected. This ATM address
will be for the LE client who was delivered the last
LE_CONFIGURE_RESPONSE that caused the
lec…
LAN-EMULATION-CLIENT-MIBAtmLaneAddress
Textual Convention: LAN-EMULATION-CLIENT-MIBAtmLaneAddress OctetString
Type Constraints:
range: 0
range: 20
 .1.3.6.1.4.1.9.9.38.1.1.1.1.7
lecsOperStatus
This object reflects the actual state of the LECS
which may differ from that of the lecsAdminStatus
object. This can occur when the interface
ifOperStatus is 'down' but the corresponding
l…
Enumeration
Enumerated Values:
1active
2inactive
 .1.3.6.1.4.1.9.9.38.1.1.1.1.8
lecsAdminStatus
The desired state of the LECS on this interface as
prescribed by the operator. The actions of the agent
will, if at all possible, eventually result in the
desired state being reflected in the lecsOperStatus.
Enumerationr/w
Enumerated Values:
1active
2inactive
 .1.3.6.1.4.1.9.9.38.1.1.1.1.9
lecsStatus
The status object for the lecsEntry. Note that the
lecsConfigTableName must be specified at row creation
time.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.9.9.38.1.1.1.1.10
lecsMasterState
An indication of whether the LECS is acting as the
operative master or is a redundant slave.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.9.9.38.1.1.1.1.11

lecsAtmAddrTable

table
.1.3.6.1.4.1.9.9.38.1.1.2 · 1 row entry · 6 columns
Open in standard view 
A  (conceptual)  table of ATM   addresses which are
listened to by LECSs on this device.
lecsAtmAddrEntry entry .1.3.6.1.4.1.9.9.38.1.1.2.1
An entry (conceptual row) that denotes an ATM
address, on a particular interface, that a LECS
listens on. Note that an entry in the lecsTable must
exist for the corresponding ifIndex first before any
A…
Indexes
IF-MIBifIndex lecsAtmAddrIndex
Column Syntax OID
lecsAtmAddrIndex
An arbitrary number that uniquely corresponds to a
value of lecsAtmAddrActual for a designated interface.
Note that lecsAtmAddrActual could not be used for the
index since it may not be known at the time of row
c…
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.9.9.38.1.1.2.1.1
lecsAtmAddrSpec
An ATM address specified by the network or local
management that, with the ATM address mask, determines
a portion of the ATM address that the LECS on the
designated interface will use to accept configure
re…
LAN-EMULATION-CLIENT-MIBAtmLaneAddressr/w
Textual Convention: LAN-EMULATION-CLIENT-MIBAtmLaneAddress OctetString
Type Constraints:
range: 0
range: 20
 .1.3.6.1.4.1.9.9.38.1.1.2.1.2
lecsAtmAddrMask
A bit mask signifying what portion of the
specified ATM address is relevant. If the ATM address
is not specified (i.e. at row creation time), then
this object defaults to all zeros (no portion of the
l…
OctetStringr/w
Constraints:
range: 20-20
range: 0-0
 .1.3.6.1.4.1.9.9.38.1.1.2.1.3
lecsAtmAddrActual
The resulting address that the LECS is accepting
configuration requests on for the designated
interface. This address is the result of the
specified ATM address, its mask and interaction
t…
LAN-EMULATION-CLIENT-MIBAtmLaneAddress
Textual Convention: LAN-EMULATION-CLIENT-MIBAtmLaneAddress OctetString
Type Constraints:
range: 0
range: 20
 .1.3.6.1.4.1.9.9.38.1.1.2.1.4
lecsAtmAddrState
Once a (conceptual) row is created, the LECS, if
active, goes about interacting through ILMI and
registering the address with the switch. The value of
this object denote what phase the current address is
i…
Enumeration
Enumerated Values:
1actualValueInvalid
2actualValueValid
3registeredWithSignalling
4regSigAndValid
5registeredWithIlmi
6regIlmiAndValid
7regSigandIlmi
8regSigIlmiAndValid
 .1.3.6.1.4.1.9.9.38.1.1.2.1.5
lecsAtmAddrStatus
The status object for the lecsAtmAddrTable.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.9.9.38.1.1.2.1.6

lecsConfigDirectConnTable

table
.1.3.6.1.4.1.9.9.38.1.1.3 · 1 row entry · 6 columns
Open in standard view 
This (conceptual)   table allows a  manager  to view
what LE   clients  have established   configure direct
connections to the LECS over the designated interface.
lecsConfigDirectConnEntry entry .1.3.6.1.4.1.9.9.38.1.1.3.1
An entry (conceptual row) that denotes a connection
to the LECS in the form of a configure direct. It is
important to note that the lecsConfigDirectConnSrc and
lecsConfigDirectConnDst are only significant when the
V…
Indexes
IF-MIBifIndex lecsConfigDirectConnVpi lecsConfigDirectConnVci
Column Syntax OID
lecsConfigDirectConnVpi
The virtual path identifier of the designated
connection to the LECS.
LAN-EMULATION-CLIENT-MIBVpiInteger
Textual Convention: LAN-EMULATION-CLIENT-MIBVpiInteger Integer32
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.9.38.1.1.3.1.1
lecsConfigDirectConnVci
The virtual channel identifier of the designated
connection to the LECS.
LAN-EMULATION-CLIENT-MIBVciInteger
Textual Convention: LAN-EMULATION-CLIENT-MIBVciInteger Integer32
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.9.9.38.1.1.3.1.2
lecsConfigDirectConnVCType
The type of virtual connection that the designated
configure direct uses. If this object has the value
'pvc' then the lecsConfigDirectConnSrc and
lecsConfigDirectConnDst will not be instantiated.
Enumeration
Enumerated Values:
1pvc
2svc
 .1.3.6.1.4.1.9.9.38.1.1.3.1.3
lecsConfigDirectConnSrc
The calling party ID if the VC is a SVC. If the VC
is a PVC then this object shall not be instantiated
for the designated VC.
LAN-EMULATION-CLIENT-MIBAtmLaneAddress
Textual Convention: LAN-EMULATION-CLIENT-MIBAtmLaneAddress OctetString
Type Constraints:
range: 0
range: 20
 .1.3.6.1.4.1.9.9.38.1.1.3.1.4
lecsConfigDirectConnDst
The address that was used by the requesting LEC to
make the designated connection. The called party ID
if the VC is a SVC. If the VC is a PVC then this
object shall not be instantiated for the designated VC.
LAN-EMULATION-CLIENT-MIBAtmLaneAddress
Textual Convention: LAN-EMULATION-CLIENT-MIBAtmLaneAddress OctetString
Type Constraints:
range: 0
range: 20
 .1.3.6.1.4.1.9.9.38.1.1.3.1.5
lecsConfigDirectDstType
The type of entity on the other end of the VC.
Enumeration
Enumerated Values:
1laneClient
2laneServer
3laneConfig
4unknown
 .1.3.6.1.4.1.9.9.38.1.1.3.1.6

lecsConfigTblTable

table
.1.3.6.1.4.1.9.9.38.1.2.1 · 1 row entry · 3 columns
Open in standard view 
A (conceptual)   table of the   configuration tables
in existence  on the device. Note   that an entry must
exist in this   table before it  can  be used in  the 
lecsTable, lecsElanConfigTable, lecsMacConfigTable  or
lecsAtmAddrConfigTable.
lecsConfigTblEntry entry .1.3.6.1.4.1.9.9.38.1.2.1.1
An entry (conceptual row) that denotes a
configuration table, potentially accessible by a LECS.
Indexes
lecsConfigTblName
Column Syntax OID
lecsConfigTblName
The textual name used to identify a configuration
table.
OctetString
Constraints:
range: 1-32
 .1.3.6.1.4.1.9.9.38.1.2.1.1.1
lecsConfigTblDefaultElanName
The ELAN name assigned to LE clients who do not
specify what ELAN they wish to join when issuing a
configuration request. It is important to understand
when the default ELAN name will be used. If the LEC
sp…
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.9.9.38.1.2.1.1.2
lecsConfigTblStatus
The status object associated with the designated
entry. Note that a value for
lecsConfigTblDefaultElanName cannot be specified at
row creation time (as it points to an entry in the
l…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.9.9.38.1.2.1.1.3

lecsElanConfigTable

table
.1.3.6.1.4.1.9.9.38.1.2.2 · 1 row entry · 5 columns
Open in standard view 
A  (conceptual)  configuration table that represents
the names  of  the ELANs   known to  a LECS  and their
corresponding LES ATM addresses.
lecsElanConfigEntry entry .1.3.6.1.4.1.9.9.38.1.2.2.1
An entry (conceptual row) in the ELAN configuration
table representing a mapping from an ELAN name to a
LES ATM address. Note that a value of ELAN name must
exist in this table before it can be used within the
l…
Indexes
lecsConfigTblName lecsElanConfigName
Column Syntax OID
lecsElanConfigName
The name assigned to an ELAN in this configuration
entry.
OctetString
Constraints:
range: 1-32
 .1.3.6.1.4.1.9.9.38.1.2.2.1.1
lecsElanLesAtmAddr
The ATM address of the LES associated with the ELAN
of this entry.
LAN-EMULATION-CLIENT-MIBAtmLaneAddressr/w
Textual Convention: LAN-EMULATION-CLIENT-MIBAtmLaneAddress OctetString
Type Constraints:
range: 0
range: 20
 .1.3.6.1.4.1.9.9.38.1.2.2.1.2
lecsElanAccess
The access of the ELAN to configure requests. A
'closed' ELAN (similar to a closed user group) is
prevented from being used as the default ELAN and also
may not be asked for in the LE_CONFIGURE_REQUEST
sol…
Enumerationr/w
Enumerated Values:
1open
2closed
 .1.3.6.1.4.1.9.9.38.1.2.2.1.3
lecsElanConfigStatus
This object can only be set to active once a valid
value of lecsElanLesAtmAddr is filled in.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.9.9.38.1.2.2.1.4
lecsElanSegmentId
The Segment Id for Token Ring ELANs associated with
this ELAN. A value of zero indicates that a ring
number is not applicable to this ELAN.
Integer32r/w
Constraints:
range: 0-4095
 .1.3.6.1.4.1.9.9.38.1.2.2.1.5

lecsMacConfigTable

table
.1.3.6.1.4.1.9.9.38.1.2.3 · 1 row entry · 4 columns
Open in standard view 
A   (conceptual) table utilized by a   LECS to map a
registered MAC address of a LEC to an ELAN name.  This
table is used be the LECS to  assign a LEC to an ELAN.
It  is, however, not  mandatory  for all  configurable
LECs to be in  this table as they  may opt to use  the
lecsAtmAddrConfigTable instead  or perhaps rely on the
default ELAN set in the lecsConfigTblTable.  Also note
that  a  LES may  opt to use  this table  to determine
authorization of a LEC to join an ELAN.
lecsMacConfigEntry entry .1.3.6.1.4.1.9.9.38.1.2.3.1
An entry (conceptual row) of a mapping between a MAC
address in primary utilization by a LEC and an ELAN
name.
Indexes
lecsConfigTblName lecsMacConfigAddress
Column Syntax OID
lecsMacConfigAddress
The MAC address of a to be associated with an ELAN
name.
SNMPv2-TCMacAddress
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.9.9.38.1.2.3.1.1
lecsMacConfigElanName
An ELAN name that will be returned to a LEC that
provides the corresponding MAC address in a
configuration request. Note that only ELAN names
within the lecsElanConfigTable are acceptable values
f…
OctetStringr/w
Constraints:
range: 1-32
 .1.3.6.1.4.1.9.9.38.1.2.3.1.2
lecsMacConfigLastUsed
The value of sysUpTime when this entry was last used
to map a MAC address to an ELAN name. Managers may
opt to use this object to garbage collect entries that
have not been used for a prolonged period of time.
SNMPv2-TCTimeStamp
Textual Convention: SNMPv2-TCTimeStamp Unsigned32
 .1.3.6.1.4.1.9.9.38.1.2.3.1.3
lecsMacConfigStatus
The row cannot be set to 'active' until an
appropiate value exists for lecsMacConfigElanName.
This may be provided by the agent if there exists a
value for the lecsConfigTblDefaultElanName for the
de…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.9.9.38.1.2.3.1.4

lecsAtmAddrConfigTable

table
.1.3.6.1.4.1.9.9.38.1.2.4 · 1 row entry · 5 columns
Open in standard view 
This (conceptual) table is  used by the LECS to  map
between an ATM address of a LEC and ELAN name.
lecsAtmAddrConfigEntry entry .1.3.6.1.4.1.9.9.38.1.2.4.1
An entry (conceptual row) of the config table that
maps between an ATM address of a LEC and ELAN name.
Indexes
lecsConfigTblName lecsAtmAddrConfigAddress lecsAtmAddrConfigMask
Column Syntax OID
lecsAtmAddrConfigAddress
An ATM Address of a LEC that when combined with an
address mask is used to determine which ELAN the LE
client should belong to.
OctetString
Constraints:
range: 20-20
 .1.3.6.1.4.1.9.9.38.1.2.4.1.1
lecsAtmAddrConfigMask
An ATM address mask associated with the LEC ATM
address of this entry. Bits in this mask that are set
to zero indicate that corresponding bit locations in
the comparison ATM address are to be ignored for the
pu…
OctetString
Constraints:
range: 20-20
 .1.3.6.1.4.1.9.9.38.1.2.4.1.2
lecsAtmAddrConfigElanName
The ELAN name to be returned to a configure request
that has specified an ATM address that matches the
address/mask pair in this entry. Note that only ELAN
names within the lecsElanConfigTable are acceptable
v…
OctetStringr/w
Constraints:
range: 1-32
 .1.3.6.1.4.1.9.9.38.1.2.4.1.3
lecsAtmAddrLastUsed
The value of sysUpTime corresponding to the time
this entry was last used. The manager may opt to use
this object to garbage collect entries that have not
been used for a prolonged period of time.
SNMPv2-TCTimeStamp
Textual Convention: SNMPv2-TCTimeStamp Unsigned32
 .1.3.6.1.4.1.9.9.38.1.2.4.1.4
lecsAtmAddrConfigStatus
The status of this entry (conceptual) row in the
lecsAtmAddrConfigTable. The row cannot be set to
'active' until an appropiate value exists for
lecsAtmAddrConfigElanName. This may be provided by the
a…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.9.9.38.1.2.4.1.5

lecsLesConfigTable

table
.1.3.6.1.4.1.9.9.38.1.2.5 · 1 row entry · 4 columns
Open in standard view 
A table of LESs servicing an ELAN.
lecsLesConfigEntry entry .1.3.6.1.4.1.9.9.38.1.2.5.1
An entry (conceptual row) in the
lecsLesConfigTable.
Indexes
lecsConfigTblName lecsElanConfigName lecsLesAtmAddr
Column Syntax OID
lecsLesAtmAddr
The ATM address of a LES configured to service this
ELAN.
OctetString
Constraints:
range: 20-20
 .1.3.6.1.4.1.9.9.38.1.2.5.1.1
lecsLesPriority
The relative priority of the LES. The lower this
number the more priority is given the LES for
servicing the ELAN. Such that a higher priority LES
will supersede operation of the ELAN in the presence
of a lower priori…
Integer32r/w
Constraints:
range: 0-10000
 .1.3.6.1.4.1.9.9.38.1.2.5.1.2
lecsLesConnState
The present state of the given LES. The active(1)
LES is servicing the ELAN, inactive(2) LESs are
connected but not accepting joins, not-connected(3)
LESs are not accounted for.
Enumeration
Enumerated Values:
1active
2inactive
3notConnected
 .1.3.6.1.4.1.9.9.38.1.2.5.1.3
lecsLesConfigStatus
The status of the conceptual row.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.9.9.38.1.2.5.1.4

lecsRDConfigTable

table
.1.3.6.1.4.1.9.9.38.1.2.6 · 1 row entry · 5 columns
Open in standard view 
A   (conceptual) table utilized by a   LECS to map a
registered Route Descriptor of a LEC to an ELAN name.
This table is used by the LECS to  assign a LEC to an
ELAN.  It  is, however, not  mandatory  for all
configurable LECs to be in  this table as they  may
opt to use the lecsAtmAddrConfigTable or
lecsMacConfigTable instead  or perhaps rely on the 
default ELAN set in the lecsConfigTblTable.  Also note
that  a  LES may  opt to use  this table  to determine
authorization of a LEC to join an ELAN.
lecsRDConfigEntry entry .1.3.6.1.4.1.9.9.38.1.2.6.1
An entry (conceptual row) of a mapping between a
Route Descriptor in primary utilization by a LEC and
an ELAN name.
Indexes
lecsConfigTblName lecsRDConfigSegmentId lecsRDConfigBridgeNum
Column Syntax OID
lecsRDConfigSegmentId
The Segment ID in a Route Descriptor provided by a
LEC during configuration.
Integer32
Constraints:
range: 0-4095
 .1.3.6.1.4.1.9.9.38.1.2.6.1.1
lecsRDConfigBridgeNum
The Bridge Number in a Route Descriptor provided by a
LEC during configuration.
Integer32
Constraints:
range: 0-15
 .1.3.6.1.4.1.9.9.38.1.2.6.1.2
lecsRDConfigElanName
An ELAN name that will be returned to a LEC that
provides the corresponding Route Descriptor in a
configuration request. Note that only ELAN names
within the lecsElanConfigTable are acceptable values
f…
OctetStringr/w
Constraints:
range: 1-32
 .1.3.6.1.4.1.9.9.38.1.2.6.1.3
lecsRDConfigLastUsed
The value of sysUpTime when this entry was last used
to map a Route Descriptor to an ELAN name. Managers may
opt to use this object to garbage collect entries that
have not been used for a prolonged period of time.
SNMPv2-TCTimeStamp
Textual Convention: SNMPv2-TCTimeStamp Unsigned32
 .1.3.6.1.4.1.9.9.38.1.2.6.1.4
lecsRDConfigStatus
The row cannot be set to 'active' until an
appropiate value exists for lecsRDConfigElanName.
This may be provided by the agent if there exists a
value for the lecsConfigTblDefaultElanName for the
des…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.9.9.38.1.2.6.1.5