CISCO-BERT-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
2
Rows
2
Columns
31

cbConfTable

table
.1.3.6.1.4.1.9.9.185.1.1.1 · 1 row entry · 15 columns
Open in standard view 
This table contains configuration, control and status parameters 
for performing Bit Error Rate Test (BERT) on an interface. 
When cbRowStatus is 'active', ifOperStatus will be set to 'testing'.
cbConfEntry entry .1.3.6.1.4.1.9.9.185.1.1.1.1
An entry in the BERT configuration table.
An entry is created for each interface running BERT by NMS.
The ifIndex refers to a unique value of an interface
in the ifTable on which BERT is being run.
The BERT is started…
Indexes
IF-MIBifIndex
Column Syntax OID
cbTestPattern
The BERT pattern to be sent and expected to be received.
An implementation may choose to support only selected patterns.
In some implementations, this object can not be modified when
the BERT is running, i.e cbRowStatu…
BertPatternsr/w
Textual Convention: BertPatterns Enumeration
Type Values:
1allZeros
2allOnes
3altOneZero
4doubleAltOnesZeros
5oneIn4
6oneIn8
7oneIn16
8threeIn24
9inbandLoopBackActivate
10inbandLoopBackDeactivate
11twoE3MinusOne
12twoE4MinusOne
13twoE5MinusOne
14twoE6MinusOne
15twoE7MinusOne
16twoE7MinusOneFT1Loopup
17twoE7MinusOneFT1Loopdown
18twoE9MinusOne
19twoE10MinusOne
20twoE11MinusOne
21twoE15MinusOne
22twoE17MinusOne
23twoE18MinusOne
24twoE20MinusOne
25twoE20MinusOneQRSS
26twoE21MinusOne
27twoE22MinusOne
28twoE23MinusOne
29twoE25MinusOne
30twoE28MinusOne
31twoE29MinusOne
32twoE31MinusOne
33dds1pattern
34dds2pattern
35dds3pattern
36dds4pattern
37dds5pattern
38userPattern
 .1.3.6.1.4.1.9.9.185.1.1.1.1.1
cbUserPattern
The object used for configuring the user defined pattern
for BERT. This is the fixed repeating BERT pattern sent
and expected to be received when the cbTestPattern object is
set to 'userPattern'. The maximum length of…
OctetStringr/w
Constraints:
range: 1-4
 .1.3.6.1.4.1.9.9.185.1.1.1.1.2
cbBertTxPatternInv
This controls inversion of the transmit BERT pattern.
Possible values are :

notInverted(1): Pattern is transmitted normally.
inverted(2): Each Mark is replaced by Space and
vice versa.

F…
Enumerationr/w
Enumerated Values:
1notInverted
2inverted
 .1.3.6.1.4.1.9.9.185.1.1.1.1.3
cbBertRxPatternInv
This controls inversion of the received BERT pattern.
Possible values are :

notInverted(1) : Pattern received is not inverted.
inverted(2) : each Mark is replaced by Space and
vice versa.
…
Enumerationr/w
Enumerated Values:
1notInverted
2inverted
 .1.3.6.1.4.1.9.9.185.1.1.1.1.4
cbLoopback
This object specifies the type of loopback established.
Possible values are:

farEndLineLoopback(1): This loopback occurs at the CPE upon
receiving a special code from the
device which initiates the loop…
Enumeration
Enumerated Values:
1farEndLineLoopback
2remoteLineLoopback
3localLoopback
4farEndPayloadLoopback
5remotePayloadLoopback
6noLoopback
 .1.3.6.1.4.1.9.9.185.1.1.1.1.5
cbLoopbackCode
This object specifies the type of the end device and
the type of loopback code used.

Latching Loopback: Latching Loopback is appropriate with
64 kbit/s DS0-A rate. Once invoked by a specific activation
s…
Enumerationr/w
Enumerated Values:
1nonLatchOCUwith1
2nonLatchOCUwithout1
3nonLatchCSU
4nonLatchDSU
5latchDS0Drop
6latchDS0Line
7latchOCU
8latchCSU
9latchDSU
10latchHL96
11v54PN127Polynomial
12lineInband
13lineLoopbackESF
14localLoopback
15noLoopbackCode
16payloadLoopbackESF
17lineLoopbackFEAC
18smartJackInband
 .1.3.6.1.4.1.9.9.185.1.1.1.1.6
cbSingleBitErrorInsert
This object is used for inserting single bit error in the
transmitted BERT pattern.

The possible values are:

noError(1) : do not insert single bit errors

insertError(2)…
Enumerationr/w
Enumerated Values:
1noError
2insertError
 .1.3.6.1.4.1.9.9.185.1.1.1.1.7
cbErrorInsertionRate
This object is used for injecting continuous errors into
transmitted BERT pattern. The errors are inserted in a BERT
pattern sent, in order to do sanity check on receive interface
in the event that no bit errors are…
Enumerationr/w
Enumerated Values:
1noError
2oneInTen
3oneInHundred
4oneInThousand
5oneInTenThousand
6oneInHundredThousand
7oneInMillion
8oneInTenMillion
 .1.3.6.1.4.1.9.9.185.1.1.1.1.8
cbDuration
This object specifies the duration for which BERT is
to be run.
secondsInteger32r/w
Constraints:
range: 1-86400
 .1.3.6.1.4.1.9.9.185.1.1.1.1.9
cbOperStatus
This object shows the status of BERT in the shelf.
The values for this object are valid only when
cbRowStatus contains active(1).

Possible values for this object:

success(1) : BERT is suc…
Enumeration
Enumerated Values:
1success
2inSync
3outOfSync
4inLoopback
5clockOutOfSync
6bertFailed
 .1.3.6.1.4.1.9.9.185.1.1.1.1.10
cbFailedReason
This object contains the reason for the BERT failure.
This object gives the additional information when
cbOperStatus is set to bertFailed(6).

The possible values are :

aborted(1) …
Enumeration
Enumerated Values:
1aborted
2loopbackFailed
3interfaceStateChange
4processorModuleStateChange
5unknown
 .1.3.6.1.4.1.9.9.185.1.1.1.1.11
cbStartDateAndTime
The Date and Time when the last BERT testing is started
on the interface. This object is valid only when
cbRowStatus is active(1).
SNMPv2-TCDateAndTime
Textual Convention: SNMPv2-TCDateAndTime OctetString
Type Constraints:
range: 8
range: 11
 .1.3.6.1.4.1.9.9.185.1.1.1.1.12
cbDS0DPCodeIteration
Valid only with cbLoopbackCode = latchDS0Drop.
DSP-OP devices can be cross connected in the central
office in a daisy chain. By this, the user has
capability to put any of the devices in the chain in
loopback mode. A…
Integer32r/w
Constraints:
range: 1-32
 .1.3.6.1.4.1.9.9.185.1.1.1.1.13
cbRowStatus
The status of this conceptual row. This object is used for
create or modify or deleting an entry from this table.

To create a row in this table, a manager must set this
object to either createAndGo(4) or…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.9.9.185.1.1.1.1.14
cbDs0BitMap
This object is only used IF the interface type is DS1
(ifType is 18 on ifTable).
This object is used to indicate which DS0 is involved
on the BERT.
The defualt value (DEFVAL) is valid and should be used
for implementat…
Bitsr/w
Enumerated Values:
0dsZero1
1dsZero2
2dsZero3
3dsZero4
4dsZero5
5dsZero6
6dsZero7
7dsZero8
8dsZero9
9dsZero10
10dsZero11
11dsZero12
12dsZero13
13dsZero14
14dsZero15
15dsZero16
16dsZero17
17dsZero18
18dsZero19
19dsZero20
20dsZero21
21dsZero22
22dsZero23
23dsZero24
24dsZero25
25dsZero26
26dsZero27
27dsZero28
28dsZero29
29dsZero30
30dsZero31
 .1.3.6.1.4.1.9.9.185.1.1.1.1.15

cbStatsTable

table
.1.3.6.1.4.1.9.9.185.1.1.2 · 1 row entry · 16 columns
Open in standard view 
This table contains BERT related real time counters.
Counters in this table are reset to zero every time
BERT is started on this interface.
cbStatsEntry entry .1.3.6.1.4.1.9.9.185.1.1.2.1
Any entry in BERT statistic table. For each instances of
cbConfTable there will be an entry in the cbStatsTable. The
objects in this table are valid only if cbOperStatus is
inSync(2).
Indexes
IF-MIBifIndex
Column Syntax OID
cbTxBitCountLower
The total number of bits transmitted.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.185.1.1.2.1.1
cbTxBitCountUpper
The number of times the associated cbTxBitCountLower object has
wrapped (i.e. restarted from zero).
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.185.1.1.2.1.2
cbHCTxBitCounts
The total number of bits transmitted. This object is
a 64-bit version of cbTxBitCounts.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.9.9.185.1.1.2.1.3
cbRxBitCountLower
The total number of bits received.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.185.1.1.2.1.4
cbRxBitCountUpper
The number of times the associated cbRxBitCountLower counter has
wrapped (i.e. restarted from zero).
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.185.1.1.2.1.5
cbHCRxBitCounts
The total number of bits received. This object is
64-bit version of cbRxBitCounts.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.9.9.185.1.1.2.1.6
cbRxBitErrCountLower
The total number of bit errors detected in the received
pattern.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.185.1.1.2.1.7
cbRxBitErrCountUpper
The number of times the associated cbRxBitErrCountLower counter has
wrapped (i.e. restarted from zero).
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.185.1.1.2.1.8
cbHCRxBitErrCounts
The number of bit errors detected in the received pattern.
This is the 64-bit version of cbRxBitErrCounts.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.9.9.185.1.1.2.1.9
cbSyncLossCounts
This is the count of number of times that synchronization has
been lost since the BERT was started or restarted.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.185.1.1.2.1.10
cbPatternLossCounts
The number of 1 second intervals during the BER test in
which pattern synchronization was not maintained for the
entire second.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.185.1.1.2.1.11
cbFrameLossCounts
The number of 1 second intervals during the BER test in
which frame synchronization was not maintained for the
entire second.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.185.1.1.2.1.12
cbESsCounts
Number of 1 second interval during the BER test that at least
one bit error was detected in the received data pattern.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.185.1.1.2.1.13
cbSESsCounts
The number of 1 second intervals during the BER test that
the Bit Error Rate was greater than 10^-3.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.185.1.1.2.1.14
cbEFSsCounts
The number of 1 second intervals during the BER test that
there were not errors detected and pattern synchronization
was maintained.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.185.1.1.2.1.15
cbErrorInjectCounts
This object contains the number of times error was injected.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.185.1.1.2.1.16