cbUserPattern

CISCO-BERT-MIB · .1.3.6.1.4.1.9.9.185.1.1.1.1.2

MIB view Table view

Object

column r/w OctetString

The object used for configuring the user defined pattern
for BERT.  This is the fixed repeating BERT pattern sent
and expected to be received when the cbTestPattern object is
set to 'userPattern'.  The maximum length of this pattern
is 32 bits.  Depending on the hardware, the patterns are 
transmitted with least significant first or most 
significant bit, until pattern length is reached.
              
This object can not be modified when the BERT is running,
i.e cbRowStatus is active(1).

Context

MIB: CISCO-BERT-MIB
OID: .1.3.6.1.4.1.9.9.185.1.1.1.1.2
Type: column
Access: readwrite
Status: current
Parent: cbConfEntry
Table: cbConfTable
Siblings: 14

Syntax

OctetString

Values & Constraints

Object Constraints

range: 1-4

Related Objects

Sibling Objects

Object	Type	Syntax	OID
cbTestPattern The BERT pattern to be sent and expected to be received. An implementation may choose to support only selected patterns. In some implementations, this object can not be modified w…	column	BertPatterns	`.1.3.6.1.4.1.9.9.185.1.1.1.1.1`
cbOperStatus This object shows the status of BERT in the shelf. The values for this object are valid only when cbRowStatus contains active(1). Possible values for this object: …	column	Enumeration	`.1.3.6.1.4.1.9.9.185.1.1.1.1.10`
cbFailedReason This object contains the reason for the BERT failure. This object gives the additional information when cbOperStatus is set to bertFailed(6). The possible val…	column	Enumeration	`.1.3.6.1.4.1.9.9.185.1.1.1.1.11`
cbStartDateAndTime The Date and Time when the last BERT testing is started on the interface. This object is valid only when cbRowStatus is active(1).	column	SNMPv2-TCDateAndTime	`.1.3.6.1.4.1.9.9.185.1.1.1.1.12`
cbDS0DPCodeIteration Valid only with cbLoopbackCode = latchDS0Drop. DSP-OP devices can be cross connected in the central office in a daisy chain. By this, the user has capability to put any of the d…	column	Integer32	`.1.3.6.1.4.1.9.9.185.1.1.1.1.13`
cbRowStatus The status of this conceptual row. This object is used for create or modify or deleting an entry from this table. To create a row in this table, a manager must set…	column	SNMPv2-TCRowStatus	`.1.3.6.1.4.1.9.9.185.1.1.1.1.14`
cbDs0BitMap This object is only used IF the interface type is DS1 (ifType is 18 on ifTable). This object is used to indicate which DS0 is involved on the BERT. The defualt value (DEFVAL) is v…	column	Bits	`.1.3.6.1.4.1.9.9.185.1.1.1.1.15`
cbBertTxPatternInv This controls inversion of the transmit BERT pattern. Possible values are : notInverted(1): Pattern is transmitted normally. inverted(2): Each Mark is replaced by …	column	Enumeration	`.1.3.6.1.4.1.9.9.185.1.1.1.1.3`
cbBertRxPatternInv This controls inversion of the received BERT pattern. Possible values are : notInverted(1) : Pattern received is not inverted. inverted(2) : each Mark is repla…	column	Enumeration	`.1.3.6.1.4.1.9.9.185.1.1.1.1.4`
cbLoopback This object specifies the type of loopback established. Possible values are: farEndLineLoopback(1): This loopback occurs at the CPE upon receiving a special code f…	column	Enumeration	`.1.3.6.1.4.1.9.9.185.1.1.1.1.5`
cbLoopbackCode This object specifies the type of the end device and the type of loopback code used. Latching Loopback: Latching Loopback is appropriate with 64 kbit/s DS0-A rate. …	column	Enumeration	`.1.3.6.1.4.1.9.9.185.1.1.1.1.6`
cbSingleBitErrorInsert This object is used for inserting single bit error in the transmitted BERT pattern. The possible values are: noError(1) : do not insert single …	column	Enumeration	`.1.3.6.1.4.1.9.9.185.1.1.1.1.7`
cbErrorInsertionRate This object is used for injecting continuous errors into transmitted BERT pattern. The errors are inserted in a BERT pattern sent, in order to do sanity check on receive interf…	column	Enumeration	`.1.3.6.1.4.1.9.9.185.1.1.1.1.8`
cbDuration This object specifies the duration for which BERT is to be run.	column	seconds Integer32	`.1.3.6.1.4.1.9.9.185.1.1.1.1.9`