CISCO-ATM-RM-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
15
Rows
15
Columns
121

rmDefaultQosObjectiveTable

table
.1.3.6.1.4.1.9.10.10.1.1.4 · 1 row entry · 5 columns
Open in standard view 
The (conceptual) table containing Resource Management
configuration information for default Quality of Service
objective values used when a signalling request is received
on a UNI interface.
rmDefaultQosObjectiveEntry entry .1.3.6.1.4.1.9.10.10.1.1.4.1
An entry (conceptual row) in the
rmDefaultQosObjectiveTable containing Resource
Management configuration for the default UNI QOS objectives.
Rows are identified by Service Category.
Indexes
rmDefaultQosServiceCategory
Column Syntax OID
rmDefaultQosServiceCategory
The Service Category to which the row applies.
Enumeration
Enumerated Values:
1cbr
2vbrRt
3vbrNrt
 .1.3.6.1.4.1.9.10.10.1.1.4.1.1
rmScDefaultQosMaxCtd
The default Maximum Cell Transfer Delay (ctd) for the
Service Category. It applies only to cbr and vbr-rt Service
Categories. Specifying a value of 16777215 signifies that
this parameter should not be checked during con…
microsecondsInteger32r/w
Constraints:
range: 0-16777215
 .1.3.6.1.4.1.9.10.10.1.1.4.1.2
rmScDefaultQosPeakToPeakCdv
The default Peak-to-peak cell delay variation (cdv) for
the Service Category. It applies only to cbr and vbr-rt Service
Categories. Specifying a value of 16777215 signifies
that this parameter should not be checked duri…
microsecondsInteger32r/w
Constraints:
range: 0-16777215
 .1.3.6.1.4.1.9.10.10.1.1.4.1.3
rmScDefaultQosClr
The default cell-loss-ratio for the Service Category (for
CLP=0 cells only). Specifying a value of 0 signifies that
this parameter should not be checked during connection setup.
The units of this object are negative pow…
Integer32r/w
Constraints:
range: 0-15
 .1.3.6.1.4.1.9.10.10.1.1.4.1.4
rmScDefaultQosClrClp01
The default cell-loss-ratio for the Service Category for
CLP=0+1 cells. Specifying a value of 0 signifies that
this parameter should not be checked during connection setup.
The units of this object are negative powers o…
Integer32r/w
Constraints:
range: 0-15
 .1.3.6.1.4.1.9.10.10.1.1.4.1.5

sharedMemRmSwitchQueuedCellTable

table
.1.3.6.1.4.1.9.10.10.1.2.1 · 1 row entry · 3 columns
Open in standard view 
The (conceptual) table containing Resource Management
information on the cells in the output queues of a
shared-memory output-queued ATM switch.
sharedMemRmSwitchQueuedCellEntry entry .1.3.6.1.4.1.9.10.10.1.2.1.1
An entry (conceptual row) in the
sharedMemRmSwitchQueuedCellTable containing Resource
Management information on the cells in the output
queues of a shared-memory switch. Rows are
indexed by priority.
Indexes
sharedMemRmCellPriority
Column Syntax OID
sharedMemRmCellPriority
The cell priority. The cell priority maps one-to-one to the
per-interface queues specified by the sharedMemRmIfOutputQ
object. All cells of a connection of a particular Service
Category are given a fixed priority. The …
Enumeration
Enumerated Values:
1p1
2p2
3p3
4p4
 .1.3.6.1.4.1.9.10.10.1.2.1.1.1
sharedMemRmSwitchQueuedCellLimit
Configured limit on the number of cells on all output queues
of the switch at any time of a particular priority.
cellsInteger32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.9.10.10.1.2.1.1.2
sharedMemRmSwitchQueuedCellCount
Count of the number of cells on all output queues
of the switch at any time of a particular priority.
cellsSNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.10.1.2.1.1.3

rmIfCfgTable

table
.1.3.6.1.4.1.9.10.10.1.3.3 · 1 row entry · 20 columns
Open in standard view 
The (conceptual) table containing Resource Management
configuration information for whole ATM interfaces.
rmIfCfgEntry entry .1.3.6.1.4.1.9.10.10.1.3.3.1
An entry (conceptual row) in the rmIfCfgTable
containing Resource Management configuration for an ATM
interface. The particular interface is identified by the
value of MIB-II's ifIndex.
Indexes
Column Syntax OID
rmIfOutPacingRateRequested
This object reflects an explicit configuration of the
state of pacing for this interface. If the value of this
object is 0, pacing is disabled on this interface.
Prior to any user configuration, the value of this obje…
kilobits-per-secondSNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.10.1.3.3.1.1
rmIfOutPacingRateInstalled
The output pacing value, in kilobits per second, in effect.
A value of 0 indicates output pacing is disabled.
This object is not instantiated for interfaces to which it
cannot be applied.
kilobits-per-secondSNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.10.1.3.3.1.2
rmIfOutPacingForce
A Set Request for rmIfOutPacingRateRequested that does not
reduce the port rate below the currently allocated bandwidth
guarantees for the output flow always succeeds irrespective
of the value of rmIfOutPacingForce. Bu…
ForceValuer/w
Textual Convention: ForceValue Enumeration
Type Values:
1forceChange
2noForceChange
 .1.3.6.1.4.1.9.10.10.1.3.3.1.3
rmIfLinkDistance
The link distance defined for the interface, expressed
in kilometers. This is then divided by the speed of light
to determine a propagation delay.
kilometersUnsigned32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.9.10.10.1.3.3.1.4
rmIfBestEffortLimit
The limit on the number of Best Effort connections that
can be established on this interface. Note that a change
to this value affects subsequent connection setup, not
existing connections. A value of 4294967295 disable…
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.10.1.3.3.1.5
rmIfCbrDefaultRxUpcTolerance
Specifies the GCRA limit parameter used for policing
of a receive cell-stream of a CBR connection on an interface,
if the limit parameter is not specified explicitly in the
connection setup request. It is specified
in c…
cell-timesSNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.10.1.3.3.1.6
rmIfVbrRtDefaultRxUpcTolerance
Specifies the maximum burst size parameter used for policing
of a receive cell-stream of a VBR-RT connection on an
interface, if this parameter is not specified
explicitly in the connection setup request. It is
specifie…
cell-timesSNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.10.1.3.3.1.7
rmIfVbrNrtDefaultRxUpcTolerance
Specifies the maximum burst size parameter used for policing
of a receive cell-stream of a VBR-NRT connection on an
interface, if this parameter is not specified
explicitly in the connection setup request. It is
specifi…
cell-timesSNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.10.1.3.3.1.8
rmIfAbrDefaultRxUpcTolerance
Specifies the GCRA limit parameter used for policing
of a receive cell-stream of an ABR connection on an interface,
if the limit parameter is not specified explicitly in the
connection setup request. It is specified
in …
cell-timesSNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.10.1.3.3.1.9
rmIfUbrDefaultRxUpcTolerance
Specifies the GCRA limit parameter used for policing
of a receive cell-stream of a UBR connection on an interface,
if the limit parameter is not specified explicitly in the
connection setup request. It is specified
in c…
cell-timesSNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.10.1.3.3.1.10
rmIfVbrRtDefaultRxUpcCdvt
Specifies the GCRA limit parameter used for peak-rate
policing of a receive cell-stream of a VBR-RT connection
on an interface, if the CDVT parameter is not specified
explicitly in the connection setup request. It is
sp…
cell-timesSNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.10.1.3.3.1.11
rmIfVbrNrtDefaultRxUpcCdvt
Specifies the GCRA limit parameter used for peak-rate
policing of a receive cell-stream of a VBR-NRT connection
on an interface, if the CDVT parameter is not specified
explicitly in the connection setup request. It is
s…
cell-timesSNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.10.1.3.3.1.12
rmIfServCategorySupport
The value of this object controls and reflects the
Service Category(s) supported on this ATM interface.

If a bit is set, the corresponding Service Category
is supported on the interface, and CAC will allo…
Integer32r/w
Constraints:
range: 0-31
 .1.3.6.1.4.1.9.10.10.1.3.3.1.13
rmIfFramingOverhead
If this object is set to true, framing overhead will be taken
into account in determining the Maximum Cell Rate that is
possible on this interface. If this object is set to false,
framing overhead will not figure in the…
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.9.10.10.1.3.3.1.14
rmIfFramingOverheadForce
A Set Request for rmIfFramingOverhead that does not reduce
the Maximum Guaranteed Services Bandwidth of this interface
below the currently allocated bandwidth guarantees always
succeeds irrespective of the value of rmIf…
ForceValuer/w
Textual Convention: ForceValue Enumeration
Type Values:
1forceChange
2noForceChange
 .1.3.6.1.4.1.9.10.10.1.3.3.1.15
rmIfOverBooking
This object specifies overbooking on this interface as
a percentage of the Maximum Cell Rate that is possible
on this interface. If the value of this object is 100,
overbooking is disabled on this interface. A set reque…
percentInteger32r/w
Constraints:
range: 100-1000
 .1.3.6.1.4.1.9.10.10.1.3.3.1.16
rmIfVbrRtPerClassOverbooking
This object specifies the Per Class Overbooking
percentage for VBR-rt service category on this
interface. If the value of this object is 100,
Per Class Overbooking for VBR-rt is disabled on this
interface. Specifyin…
percentInteger32r/w
Constraints:
range: 100-3200
 .1.3.6.1.4.1.9.10.10.1.3.3.1.17
rmIfVbrNrtPerClassOverbooking
This object specifies the Per Class Overbooking
percentage for VBR-Nrt service category on this
interface. If the value of this object is 100,
Per Class Overbooking for VBR-Nrt is disabled on this
interface. Specifying …
percentInteger32r/w
Constraints:
range: 100-3200
 .1.3.6.1.4.1.9.10.10.1.3.3.1.18
rmIfAbrPerClassOverbooking
This object specifies the Per Class Overbooking
percentage for ABR service category on this
interface. If the value of this object is 100,
Per Class Overbooking for ABR is disabled on this
interface. Specifying a value …
percentInteger32r/w
Constraints:
range: 100-3200
 .1.3.6.1.4.1.9.10.10.1.3.3.1.19
rmIfUbrPerClassOverbooking
This object specifies the Per Class Overbooking
percentage for UBR service category on this
interface. If the value of this object is 100,
Per Class Overbooking for UBR is disabled on this
interface. Specifying a value …
percentInteger32r/w
Constraints:
range: 100-3200
 .1.3.6.1.4.1.9.10.10.1.3.3.1.20

rmIfDirectionCfgTable

table
.1.3.6.1.4.1.9.10.10.1.3.4 · 1 row entry · 22 columns
Open in standard view 
The (conceptual) table containing Resource Management
configuration information for a single direction of
traffic flow on ATM interfaces.
rmIfDirectionCfgEntry entry .1.3.6.1.4.1.9.10.10.1.3.4.1
An entry (conceptual row) in the rmIfInOutCfgTable
containing Resource Management configuration for a
traffic direction on an ATM interface. The particular
interface is identified by the value of MIB-II's ifIndex,
and …
Indexes
RFC1213-MIBifIndex rmIfDirection
Column Syntax OID
rmIfDirection
Selects the traffic direction for which subsequent row
parameters are read or written. In is received from
the port(into the device), Out is transmitted to the
port (from the device).
Enumeration
Enumerated Values:
1receive
2transmit
 .1.3.6.1.4.1.9.10.10.1.3.4.1.1
rmIfDirControlLinkShareMaxAgg
Configuration in the Controller Link Sharing (CLS) scheme.
Specifies the maximum aggregate Guaranteed Service
(CBR or VBR) traffic that can be allocated in a
traffic direction on an interface. It is expressed
as a perce…
Integer32r/w
Constraints:
range: -1-95
 .1.3.6.1.4.1.9.10.10.1.3.4.1.2
rmIfDirControlLinkShareMinCbr
Configuration in the Controller Link Sharing (CLS) scheme.
Specifies a minimum amount of CBR traffic that can
be reserved in a traffic direction on an interface.
It is expressed as a percentage of the maximum traffic
di…
Integer32r/w
Constraints:
range: -1-95
 .1.3.6.1.4.1.9.10.10.1.3.4.1.3
rmIfDirControlLinkShareMaxCbr
Configuration in the Controller Link Sharing (CLS) scheme.
Specifies the maximum CBR traffic that can be allocated
in a traffic direction on an interface. It is expressed
as a percentage of the maximum traffic direction…
Integer32r/w
Constraints:
range: -1-95
 .1.3.6.1.4.1.9.10.10.1.3.4.1.4
rmIfDirControlLinkShareMinVbr
Configuration in the Controller Link Sharing (CLS) scheme.
Specifies a minimum amount of VBR traffic that can
be reserved in a traffic direction on an interface.
It is expressed as a percentage of the maximum traffic
di…
Integer32r/w
Constraints:
range: -1-95
 .1.3.6.1.4.1.9.10.10.1.3.4.1.5
rmIfDirControlLinkShareMaxVbr
Configuration in the Controller Link Sharing (CLS) scheme.
Specifies the maximum VBR traffic that can be allocated
in a traffic direction on an interface. It is expressed
as a percentage of the maximum traffic direction…
Integer32r/w
Constraints:
range: -1-95
 .1.3.6.1.4.1.9.10.10.1.3.4.1.6
rmIfDirMaxCbrPcr
Specifies the maximum Peak-cell-rate (pcr) traffic
parameter that can be specified for CBR connections
in a traffic direction on an interface. It is specified
in cells-per-second. A value of 4294967295 disables checking…
cells-per-secondSNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.10.1.3.4.1.7
rmIfDirMaxCbrTolerance
Specifies the maximum limit parameter used in the GCRA
algorithm for traffic policing that can be specified
for CBR connections in a traffic direction on an interface.
It is specified in cell-times. A value of 42949672…
cell-timesSNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.10.1.3.4.1.8
rmIfDirMaxVbrPcr
Specifies the maximum Peak-cell-rate (pcr) traffic
parameter that can be specified for VBR connections
in a traffic direction on an interface. It is specified
in cells-per-second. A value of 4294967295 disables checkin…
cells-per-secondSNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.10.1.3.4.1.9
rmIfDirMaxVbrScr
Specifies the maximum Sustained-cell-rate (scr) traffic
parameter that can be specified for VBR connections
in a traffic direction on an interface. It is specified
in cells-per-second. A value of 4294967295 disables ch…
cells-per-secondSNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.10.1.3.4.1.10
rmIfDirMaxVbrTolerance
Specifies the maximum limit parameter used in the GCRA
algorithm for traffic policing that can be specified
for VBR connections in a traffic direction on an interface.
It is specified in cell-times. A value of 42949672…
cell-timesSNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.10.1.3.4.1.11
rmIfDirMaxAbrPcr
Specifies the maximum Peak-cell-rate (pcr) traffic
parameter that can be specified for ABR connections
in a traffic direction on an interface. It is specified
in cells-per-second. A value of 4294967295 disables checkin…
cells-per-secondSNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.10.1.3.4.1.12
rmIfDirMaxAbrTolerance
Specifies the maximum limit parameter used in the GCRA
algorithm for traffic policing that can be specified
for ABR connections in a traffic direction on an interface.
It is specified in cell-times. A value of 42949672…
cell-timesSNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.10.1.3.4.1.13
rmIfDirMaxUbrPcr
Specifies the maximum Peak-cell-rate (pcr) traffic
parameter that can be specified for UBR connections
in a traffic direction on an interface. It is specified
in cells-per-second. A value of 4294967295 disables checkin…
cells-per-secondSNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.10.1.3.4.1.14
rmIfDirMaxUbrTolerance
Specifies the maximum limit parameter used in the GCRA
algorithm for traffic policing that can be specified
for UBR connections in a traffic direction on an interface.
It is specified in cell-times. A value of 42949672…
cell-timesSNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.10.1.3.4.1.15
rmIfDirMaxAbrMcr
Specifies the maximum Minimum-cell-rate (mcr) traffic
parameter that can be specified for ABR connections
in a traffic direction on an interface. It is specified
in cells-per-second. A value of 4294967295 disables chec…
cells-per-secondSNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.10.1.3.4.1.16
rmIfDirMaxUbrMcr
Specifies the maximum Minimum-cell-rate (mcr) traffic
parameter that can be specified for UBR plus (UBR with
an mcr guaranteed) connections in a traffic direction on
an interface. It is specified in cells-per-second. A…
cells-per-secondSNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.10.1.3.4.1.17
rmIfDirMaxVbrCdvt
Specifies the maximum peak-rate CDVT parameter used in
the GCRA algorithm for traffic policing that can be specified
for VBR connections in a traffic direction on an interface.
It is specified in cell-times. A value of…
cell-timesSNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.10.1.3.4.1.18
rmIfDirControlLinkShareMinAbr
Configuration in the Controller Link Sharing (CLS) scheme.
Specifies a minimum amount of ABR traffic that can
be reserved in a traffic direction on an interface.
It is expressed as a percentage of the maximum traffic
di…
Integer32r/w
Constraints:
range: -1-95
 .1.3.6.1.4.1.9.10.10.1.3.4.1.19
rmIfDirControlLinkShareMaxAbr
Configuration in the Controller Link Sharing (CLS) scheme.
Specifies the maximum ABR traffic that can be allocated
in a traffic direction on an interface. It is expressed
as a percentage of the maximum traffic direction…
Integer32r/w
Constraints:
range: -1-95
 .1.3.6.1.4.1.9.10.10.1.3.4.1.20
rmIfDirControlLinkShareMinUbr
Configuration in the Controller Link Sharing (CLS) scheme.
Specifies a minimum amount of UBR plus (UBR with
an mcr guaranteed) traffic that can be reserved in a
traffic direction on an interface. It is expressed as
a p…
Integer32r/w
Constraints:
range: -1-95
 .1.3.6.1.4.1.9.10.10.1.3.4.1.21
rmIfDirControlLinkShareMaxUbr
Configuration in the Controller Link Sharing (CLS) scheme.
Specifies the maximum UBR plus traffic that can be allocated
in a traffic direction on an interface. It is expressed
as a percentage of the maximum traffic dire…
Integer32r/w
Constraints:
range: -1-95
 .1.3.6.1.4.1.9.10.10.1.3.4.1.22

rmIfServiceCategoryStateTable

table
.1.3.6.1.4.1.9.10.10.1.4.1 · 1 row entry · 13 columns
Open in standard view 
The (conceptual) table containing Resource Management
state information for ATM interfaces by Service Category.
rmIfServiceCategoryStateEntry entry .1.3.6.1.4.1.9.10.10.1.4.1.1
An entry (conceptual row) in the
rmIfServiceCategoryStateTable containing Resource
Management configuration for an ATM interface. Rows
are identified by the value of MIB-II's ifIndex, and
the Service Category.
Indexes
RFC1213-MIBifIndex rmIfSc
Column Syntax OID
rmIfSc
The Service Category to which the row applies.
Enumeration
Enumerated Values:
1cbr
2vbrRt
3vbrNrt
4abr
5ubr
 .1.3.6.1.4.1.9.10.10.1.4.1.1.1
rmIfScRxAcr
The Available Cell Rate (specified in cells per second) for
traffic received on the interface for this Service Category.
This is the bandwidth available for connections. For
CBR and VBR Service Categories, this value de…
cells-per-secondSNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.10.1.4.1.1.2
rmIfScTxAcr
The Available Cell Rate (specified in cells per second) for
traffic sent out the interface for this Service Category.
This is the bandwidth available for connections. For
CBR and VBR Service Categories, this value decre…
cells-per-secondSNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.10.1.4.1.1.3
rmIfScRxAlcr
The Allocated Cell Rate (specified in cells per second) for
traffic received on the interface for this Service Category.
This is the bandwidth allocated-to connections. For
CBR and VBR Service Categories, this value inc…
cells-per-secondSNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.10.1.4.1.1.4
rmIfScTxAlcr
The Allocated Cell Rate (specified in cells per second) for
traffic sent out the interface for this Service Category.
This is the bandwidth allocated-to connections. For
Guaranteed Service Categories, this value increas…
cells-per-secondSNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.10.1.4.1.1.5
rmIfScNumSvxConns
The number of signalled connections (VC or VP) of this
Service Category currently allocated on the interface.
number of connectionsSNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.10.1.4.1.1.6
rmIfScNumPvxConns
The number of permanent connections (VC or VP) of this
Service Category currently allocated on the interface.
number of connectionsSNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.10.1.4.1.1.7
rmIfScTxMaxCtd
The maximum Cell Transfer Delay estimated to be experienced by
cells of connections transmitted out this interface of this
Service Category. This is estimate does not distinguish between
clp0 and clp1 cells. This obje…
microsecondsSNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.10.1.4.1.1.8
rmIfScTxP2PeakCdv
The Peak-to-Peak Cell Delay Variation estimated to be experienced
by cells of connections transmitted out this interface of this
Service Category. This estimate does not distinguish between
clp0 and clp1 cells. This …
microsecondsSNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.10.1.4.1.1.9
rmIfScTxClr
The Cell Loss Ratio estimated to be experienced by cells
of connections transmitted out this interface of this Service
Category. This is an estimate for clp0 cells only. The unit of
this object is negative power of t…
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.10.1.4.1.1.10
rmIfScTxClrClp01
The Cell Loss Ratio estimated to be experienced by cells
of connections transmitted out this interface of this Service
Category. This is an estimate for clp0+1 cells. The unit of
this object is negative power of ten …
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.10.1.4.1.1.11
rmIfScRxDynBwSvcAcr
The Available Cell Rate (specified in cells per second) for traffic
received on the interface for this Service Category. This object
is valid only for IMA physical interfaces. This is the bandwidth
available for SVC…
cells-per-secondSNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.10.1.4.1.1.12
rmIfScTxDynBwSvcAcr
The Available Cell Rate (specified in cells per second) for traffic
transmitted on the interface for this Service Category. This
object is valid only for IMA physical interfaces. This is the
bandwidth available for …
cells-per-secondSNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.10.1.4.1.1.13

rmIfServiceCategoryStatisticsTable

table
.1.3.6.1.4.1.9.10.10.1.5.1 · 1 row entry · 10 columns
Open in standard view 
The (conceptual) table containing Resource Management
statistics information for ATM interfaces by Service Category.
rmIfServiceCategoryStatisticsEntry entry .1.3.6.1.4.1.9.10.10.1.5.1.1
An entry (conceptual row) in the
rmIfServiceCategoryStatisticsTable containing Resource
Management configuration for an ATM interface. Rows
are identified by the value of MIB-II's ifIndex, and
the Service Category.
Indexes
RFC1213-MIBifIndex rmIfSc
Column Syntax OID
rmIfScRcacResultNumAdmit
The number of successful resource allocation requests for this
interface.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.10.1.5.1.1.1
rmIfScRcacResultNumTotalRequests
The total number of resource allocation requests for this
interface.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.10.1.5.1.1.2
rmIfScRcacResultNumFailTraffComb
The number of resource allocation requests which are considered
to be in error due to an unsupported combination of traffic
parameters. An example of this would be, for a VBR connection,
a zero maximum burst-size given …
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.10.1.5.1.1.3
rmIfScRcacResultNumFailBw
The number of resource allocation requests which are considered
to be in error due to a lack of bandwidth. This will never
occur for Best Effort Service Categories.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.10.1.5.1.1.4
rmIfScRcacResultNumFailLoss
The number of resource allocation requests which are considered
to be in error due to exceeding cell loss criterion.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.10.1.5.1.1.5
rmIfScRcacResultNumFailDelay
The number of resource allocation requests which are considered
to be in error due to exceeding maximum delay criterion.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.10.1.5.1.1.6
rmIfScRcacResultNumFailCdv
The number of resource allocation requests which are considered
to be in error due to exceeding cell delay variation criterion.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.10.1.5.1.1.7
rmIfScRcacResultNumFailBeLimit
The number of resource allocation requests which are considered
to be in error due to exceeding a limit on the number of
Best-Effort connections.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.10.1.5.1.1.8
rmIfScRcacResultNumFailParmLimit
The number of resource allocation requests which are considered
to be in error due to exceeding a traffic parameter limit
criterion.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.10.1.5.1.1.9
rmIfScRcacResultNumFailOther
The number of resource allocation requests which are considered
to be in error for a reason not enumerated by other counter
objects.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.10.1.5.1.1.10

sharedMemRmIfOutputQCfgTable

table
.1.3.6.1.4.1.9.10.10.1.6.1 · 1 row entry · 6 columns
Open in standard view 
The (conceptual) table containing configuration information
for ATM physical interface output queues. This table is not 
instantiated for interfaces to which it cannot be applied.
sharedMemRmIfOutputQCfgEntry entry .1.3.6.1.4.1.9.10.10.1.6.1.1
An entry (conceptual row) in the sharedMemRmIfOutputQCfgTable
containing Resource Management configuration for an ATM
interface. A particular row is identified by the
value of MIB-II's ifIndex, and the output queue.
Indexes
RFC1213-MIBifIndex sharedMemRmIfOutputQ
Column Syntax OID
sharedMemRmIfOutputQ
The output queue on this ATM interface.
Enumeration
Enumerated Values:
1q1
2q2
3q3
4q4
 .1.3.6.1.4.1.9.10.10.1.6.1.1.1
sharedMemRmIfOutputQServCategory
The service category(s) sharing this output queue on
this ATM interface.
The various bit positions are:
1 constant bit rate (cbr)
2 variable bit rate-real time (vbr-rt)
4 variable bit rate-no…
Integer32
Constraints:
range: 1-31
 .1.3.6.1.4.1.9.10.10.1.6.1.1.2
sharedMemRmIfOutputQRequestedMaxSize
This object reflects an explicit configuration of the
maximum number of cells that may occupy this queue.
If the value of this object is 0, the maximum size in effect
is a default value calculated by software.
Prior t…
cellsInteger32r/w
Constraints:
range: 0-65504
 .1.3.6.1.4.1.9.10.10.1.6.1.1.3
sharedMemRmIfOutputQInstalledMaxSize
The maximum number of cells that may occupy this queue.
Will be a multiple of 32. Explicit configuration of maximum
size are made via the object sharedMemrmIfOutputQRequestedMaxSize.
Such requests are rounded up to the …
cellsInteger32
Constraints:
range: 32-65504
 .1.3.6.1.4.1.9.10.10.1.6.1.1.4
sharedMemRmIfOutputQMaxSizeForce
Must be set to forceChange to allow changing of
sharedMemRmIfOutputQRequestedMaxSize for a queue on an
interface that is 'up'. This is because such a change
causes the interface to lose data while the size is
changed…
ForceValuer/w
Textual Convention: ForceValue Enumeration
Type Values:
1forceChange
2noForceChange
 .1.3.6.1.4.1.9.10.10.1.6.1.1.5
sharedMemRmIfOutputQCellCount
Count of the number of cells in the output queue.
cellsSNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.10.1.6.1.1.6

sharedMemRmIfThresholdCfgTable

table
.1.3.6.1.4.1.9.10.10.1.6.2 · 1 row entry · 3 columns
Open in standard view 
The (conceptual) table containing the output queue thresholds
used on ATM physical interface output queues. These are specified
per Service Category. This table is not instantiated for interfaces
to which it cannot be applied.
sharedMemRmIfThresholdCfgEntry entry .1.3.6.1.4.1.9.10.10.1.6.2.1
An entry (conceptual row) in the sharedMemRmIfThresholdCfgTable
containing Resource Management configuration for an ATM
interface. A particular row is identified by the
value of MIB-II's ifIndex, and the Service Catego…
Indexes
RFC1213-MIBifIndex rmIfSc
Column Syntax OID
sharedMemRmIfDiscardThreshold
The output queue CLP/EPD threshold for this Service
Category on this ATM interface. This is expressed in
percent-of-full. Note that 100% full effectively turns
off the threshold.
FineQueueThresholdr/w
Textual Convention: FineQueueThreshold Enumeration
Type Values:
1percent12
2percent25
3percent37
4percent50
5percent62
6percent75
7percent87
8percent100
 .1.3.6.1.4.1.9.10.10.1.6.2.1.1
sharedMemRmIfEfciThreshold
The output queue EFCI marking threshold for this Service
Category on this ATM interface. This is expressed in
percent-of-full. Note that 100% full effectively turns off
the threshold.
Enumerationr/w
Enumerated Values:
1percent12
2percent25
3percent50
4percent100
 .1.3.6.1.4.1.9.10.10.1.6.2.1.2
sharedMemRmIfAbrRelativeRateThreshold
The ABR Relative-rate marking queue congestion threshold
for the ABR queue on this ATM interface. This is expressed in
percent-of-full. Note that 100% full effectively turns off
the threshold. This object is only defin…
FineQueueThresholdr/w
Textual Convention: FineQueueThreshold Enumeration
Type Values:
1percent12
2percent25
3percent37
4percent50
5percent62
6percent75
7percent87
8percent100
 .1.3.6.1.4.1.9.10.10.1.6.2.1.3

lsPerVcqRmThreshGrpTable

table
.1.3.6.1.4.1.9.10.10.1.7.1 · 1 row entry · 8 columns
Open in standard view 
The (conceptual) table containing information
for Switch Threshold Groups. When cells are
queued in the switch for a direction of cell
traffic on an ATM connection (VC or VP), several
functions related to queueing are dictated
by the congestion state (fullness) of the Threshold
Group. Each connection queue is a member of
a Threshold Group.
These functions include:
- The limit on the number of cells that can
  be queued. Cells exceeding this limit are
  discarded.
- The discard threshold, used for CLP/EPD
  discard when the fullness of the queue exceeds
  the threshold.
- The marking threshold, used for EFCI
  and ABR-RR marking.
Each Threshold Group has a maximum number of cells
that can be resident in it at any one time. The
number of cells in a Group consists of the number
of cells in all the queues that are a member of
the Group. As the number of cells in a Group
approaches the maximum number for the Group,
the queue limits may be decreased. This limits
the share of  buffering available to each
connection as cell-memory is used.
lsPerVcqRmThreshGrpEntry entry .1.3.6.1.4.1.9.10.10.1.7.1.1
An entry (conceptual row) in the lsPerVcqRmThreshGrpTable
containing Resource Management configuration for a
Threshold Group. All entries ever in the table are
present at startup, none are created dynamically.
Indexes
lsPerVcqRmThreshGrp
Column Syntax OID
lsPerVcqRmThreshGrp
The Threshold Group specified by this entry.
LsPerVcqThresholdGroup
Textual Convention: LsPerVcqThresholdGroup Enumeration
Type Values:
1tg1
2tg2
3tg3
4tg4
5tg5
6tg6
7tg7
8tg8
9tg9
10tg10
11tg11
12tg12
13tg13
14tg14
15tg15
16tg16
 .1.3.6.1.4.1.9.10.10.1.7.1.1.1
lsPerVcqRmThreshGrpMaxSize
This object specifies the maximum number of cells that may
occupy this Threshold Group. While any integer in the range
can be set, the hardware granularity is in 64-cell units.
Therefore, the value installed is [(value…
cellsInteger32r/w
Constraints:
range: -1-65535
 .1.3.6.1.4.1.9.10.10.1.7.1.1.2
lsPerVcqRmThreshGrpQMaxSize
This object reflects an explicit configuration of the
maximum limit on the number of cells that may occupy
connection queues that are a member of this Threshold
Group. A connection queue that is a member of this
Thresho…
cellsInteger32r/w
Constraints:
range: 31-16383
 .1.3.6.1.4.1.9.10.10.1.7.1.1.3
lsPerVcqRmThreshGrpQMinSize
This object reflects an explicit configuration of the
minimum limit on the number of cells that may occupy
connection queues that are a member of this Threshold
Group. The Threshold Group at it's most congested will
not…
cellsInteger32r/w
Constraints:
range: 1-1023
 .1.3.6.1.4.1.9.10.10.1.7.1.1.4
lsPerVcqRmThreshGrpDiscThreshold
The output queue CLP/EPD threshold for this Threshold
Group. This is expressed in percent-of-full. Note that
100% full effectively turns off the threshold. Setting
this object to -1 restores the default value for the
Th…
percentageInteger32r/w
Constraints:
range: -1-100
 .1.3.6.1.4.1.9.10.10.1.7.1.1.5
lsPerVcqRmThreshGrpMarkThreshold
The output queue EFCI/ABR-RR marking threshold for
this Threshold Group. This is expressed in
percent-of-full. Note that 100% full effectively turns
off the threshold. Setting this object to -1 restores
the default valu…
percentageInteger32r/w
Constraints:
range: -1-100
 .1.3.6.1.4.1.9.10.10.1.7.1.1.6
lsPerVcqRmThreshGrpName
The name associated with the threshold-group. If
this is set to the null-string, the default
name for the Threshold Group is assigned.
OctetStringr/w
Constraints:
range: 0-20
 .1.3.6.1.4.1.9.10.10.1.7.1.1.7
lsPerVcqRmThreshGrpCellCount
Count of the number of cells in the Threshold
Group.
cellsSNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.10.1.7.1.1.8

lsPerVcqRmThreshGrpServiceTable

table
.1.3.6.1.4.1.9.10.10.1.7.2 · 1 row entry · 2 columns
Open in standard view 
The (conceptual) table specifying which
VC or VP queues  are assigned to a Threshold
Group.
lsPerVcqRmThreshGrpServiceEntry entry .1.3.6.1.4.1.9.10.10.1.7.2.1
An entry (conceptual row) in the
lsPerVcqRmThreshGrpServiceTable. All entries
ever in the table are present at startup, none
are created dynamically.
Indexes
lsPerVcqRmThreshGrpService
Column Syntax OID
lsPerVcqRmThreshGrpService
The Service specified by this entry.
LsPerVcqThresholdGroupService
Textual Convention: LsPerVcqThresholdGroupService Enumeration
Type Values:
1cbr
2vbrRt
3vbrNrt
4abr
5ubr
 .1.3.6.1.4.1.9.10.10.1.7.2.1.1
lsPerVcqRmThreshGrpServGroup
The Threshold Group to which VC/VP queues specified
by the service are assigned. Changing the assignment
of service to Threshold Group does not alter the
assignment for connections currently installed in
hardware, but t…
LsPerVcqThresholdGroupr/w
Textual Convention: LsPerVcqThresholdGroup Enumeration
Type Values:
1tg1
2tg2
3tg3
4tg4
5tg5
6tg6
7tg7
8tg8
9tg9
10tg10
11tg11
12tg12
13tg13
14tg14
15tg15
16tg16
 .1.3.6.1.4.1.9.10.10.1.7.2.1.2

lsPerVcqRmIfTable

table
.1.3.6.1.4.1.9.10.10.1.8.1 · 1 row entry · 1 columns
Open in standard view 
The (conceptual) table containing configuration information
for ATM physical interfaces.
lsPerVcqRmIfEntry entry .1.3.6.1.4.1.9.10.10.1.8.1.1
An entry (conceptual row) in the lsPerVcqRmIfTable
containing Resource Management configuration for an ATM
interface. An entry in the table is present when an
entry in the ifTable is created for an ATM interface
that …
Indexes
Column Syntax OID
lsPerVcqRmIfMinWrrServiceClass
The service classes on an interface are partitioned
into two subsets, dictating how a service class
with a cell ready to transmit is chosen (subsequently
a connection is chosen within the selected service
class). There …
service classLsPerVcqServiceClassr/w
Textual Convention: LsPerVcqServiceClass Enumeration
Type Values:
1c1
2c2
3c3
4c4
5c5
6c6
7c7
8c8
 .1.3.6.1.4.1.9.10.10.1.8.1.1.1

lsPerVcqRmIfServiceClassTable

table
.1.3.6.1.4.1.9.10.10.1.8.2 · 1 row entry · 3 columns
Open in standard view 
The (conceptual) table containing configuration information
for ATM physical interface Service Classes (not
logical port ATM interfaces). An ATM connection (VC or VP)
on an interface is a member of a Service Class. The
Service Class is used in the scheduling discipline that
determines which cell is next transmitted on the
interface. If the rate scheduler has no cell
to be sent in the guaranteed cell-flow on an interface,
a decision is made between all Service Classes with
VCs with cells ready for transmit.
lsPerVcqRmIfServiceClassEntry entry .1.3.6.1.4.1.9.10.10.1.8.2.1
An entry (conceptual row) in the lsPerVcqRmIfServiceClassTable
containing Resource Management configuration for an ATM
interface. A particular row is identified by the
value of MIB-II's ifIndex, and the output queue.
A…
Indexes
RFC1213-MIBifIndex lsPerVcqRmIfServiceClass
Column Syntax OID
lsPerVcqRmIfServiceClass
The service class on this ATM interface.
LsPerVcqServiceClass
Textual Convention: LsPerVcqServiceClass Enumeration
Type Values:
1c1
2c2
3c3
4c4
5c5
6c6
7c7
8c8
 .1.3.6.1.4.1.9.10.10.1.8.2.1.1
lsPerVcqRmIfServClassConnType
The types of connections using this service class on
this ATM interface.
The various bit positions are:
1 constant bit rate (cbr)
2 variable bit rate-real time (vbr-rt)
4 variable bit rate-no…
Integer32
Constraints:
range: 1-31
 .1.3.6.1.4.1.9.10.10.1.8.2.1.2
lsPerVcqRmIfServClassWrrWeight
Configure the weighting specified for a service class
to make the scheduling decision among active service
classes in the WRR subset.
weightInteger32r/w
Constraints:
range: 1-15
 .1.3.6.1.4.1.9.10.10.1.8.2.1.3

cgrPerVcqRmThreshGrpTable

table
.1.3.6.1.4.1.9.10.10.1.9.1 · 1 row entry · 9 columns
Open in standard view 
The (conceptual) table containing information
for Switch Threshold Groups. When cells are
queued in the switch for a direction of cell
traffic on an ATM connection (VC or VP), several
functions related to queueing are dictated
by the congestion state (fullness) of the Threshold
Group. Each connection queue is a member of
a Threshold Group.
These functions include:
- The limit on the number of cells that can
  be queued. Cells exceeding this limit are
  discarded.
- The discard threshold, used for CLP/EPD
  discard when the fullness of the queue exceeds
  the threshold.
- The marking threshold, used for EFCI marking.
Each Threshold Group has a maximum number of cells
that can be resident in it at any one time. The
number of cells in a Group consists of the number
of cells in all the queues that are a member of
the Group. As the number of cells in a Group
approaches the maximum number for the Group,
the queue limits may be decreased. This limits
the share of  buffering available to each
connection as cell-memory is used.
          
On the Catalyst8540MSR platform, there are a
maximum of 8 switching modules. Each switching
module services a certain group of ports (this
mapping is fixed in hardware). Each module also
has its own cell memory (for per VC queueing),
and hence performs its own congestion control,
independent of any other switching module.
Each switching module has its own set of
Switch Threshold Groups, which are 
independently programmable and readable.
          
This table is supported only on the Catalyst8540MSR
platform.
cgrPerVcqRmThreshGrpEntry entry .1.3.6.1.4.1.9.10.10.1.9.1.1
An entry (conceptual row) in the cgrPerVcqRmThreshGrpTable
containing Resource Management configuration for a
Threshold Group. All entries ever in the table are
present at startup, none are created dynamically.
Indexes
cgrPerVcqModuleId cgrPerVcqRmThreshGrp
Column Syntax OID
cgrPerVcqModuleId
The switching module specified by this entry.
CgrPerVcqModuleId
Textual Convention: CgrPerVcqModuleId Enumeration
Type Values:
1module1
2module2
3module3
4module4
5module5
6module6
7module7
8module8
 .1.3.6.1.4.1.9.10.10.1.9.1.1.1
cgrPerVcqRmThreshGrp
The Threshold Group specified by this entry.
LsPerVcqThresholdGroup
Textual Convention: LsPerVcqThresholdGroup Enumeration
Type Values:
1tg1
2tg2
3tg3
4tg4
5tg5
6tg6
7tg7
8tg8
9tg9
10tg10
11tg11
12tg12
13tg13
14tg14
15tg15
16tg16
 .1.3.6.1.4.1.9.10.10.1.9.1.1.2
cgrPerVcqRmThreshGrpMaxSize
This object specifies the maximum number of cells that may
occupy this Threshold Group. While any integer in the range
can be set, the hardware granularity is in 64-cell units.
Therefore, the value installed is [(value …
cellsInteger32r/w
Constraints:
range: -1-131071
 .1.3.6.1.4.1.9.10.10.1.9.1.1.3
cgrPerVcqRmThreshGrpQMaxSize
This object reflects an explicit configuration of the
maximum limit on the number of cells that may occupy
connection queues that are a member of this Threshold
Group. A connection queue that is a member of this
Thresho…
cellsInteger32r/w
Constraints:
range: 31-16383
 .1.3.6.1.4.1.9.10.10.1.9.1.1.4
cgrPerVcqRmThreshGrpQMinSize
This object reflects an explicit configuration of the
minimum limit on the number of cells that may occupy
connection queues that are a member of this Threshold
Group. The Threshold Group at it's most congested will
not…
cellsInteger32r/w
Constraints:
range: 1-1023
 .1.3.6.1.4.1.9.10.10.1.9.1.1.5
cgrPerVcqRmThreshGrpDiscThreshold
The output queue CLP/EPD threshold for this Threshold
Group. This is expressed in percent-of-full. Note that
100% full effectively turns off the threshold. Setting
this object to -1 restores the default value for the
Th…
percentageInteger32r/w
Constraints:
range: -1-100
 .1.3.6.1.4.1.9.10.10.1.9.1.1.6
cgrPerVcqRmThreshGrpMarkThreshold
The output queue EFCI/ABR-RR marking threshold for
this Threshold Group. This is expressed in
percent-of-full. Note that 100% full effectively turns
off the threshold. Setting this object to -1 restores
the default valu…
percentageInteger32r/w
Constraints:
range: -1-100
 .1.3.6.1.4.1.9.10.10.1.9.1.1.7
cgrPerVcqRmThreshGrpName
The name associated with the threshold-group. If
this is set to the null-string, the default
name for the Threshold Group is assigned.
OctetStringr/w
Constraints:
range: 0-20
 .1.3.6.1.4.1.9.10.10.1.9.1.1.8
cgrPerVcqRmThreshGrpCellCount
Count of the number of cells in the Threshold
Group.
cellsSNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.10.1.9.1.1.9

cgrPerVcqRmThreshGrpServiceTable

table
.1.3.6.1.4.1.9.10.10.1.9.2 · 1 row entry · 2 columns
Open in standard view 
The (conceptual) table specifying which
VC or VP queues  are assigned to a Threshold
Group.
          
This table is supported only on the Catalyst8540MSR
Platform.
cgrPerVcqRmThreshGrpServiceEntry entry .1.3.6.1.4.1.9.10.10.1.9.2.1
An entry (conceptual row) in the
cgrPerVcqRmThreshGrpServiceTable. All entries
ever in the table are present at startup, none
are created dynamically.
Indexes
cgrPerVcqRmThreshGrpService
Column Syntax OID
cgrPerVcqRmThreshGrpService
The Service specified by this entry.
LsPerVcqThresholdGroupService
Textual Convention: LsPerVcqThresholdGroupService Enumeration
Type Values:
1cbr
2vbrRt
3vbrNrt
4abr
5ubr
 .1.3.6.1.4.1.9.10.10.1.9.2.1.1
cgrPerVcqRmThreshGrpServGroup
The Threshold Group to which VC/VP queues specified
by the service are assigned. Changing the assignment
of service to Threshold Group does not alter the
assignment for connections currently installed in
hardware, but t…
LsPerVcqThresholdGroupr/w
Textual Convention: LsPerVcqThresholdGroup Enumeration
Type Values:
1tg1
2tg2
3tg3
4tg4
5tg5
6tg6
7tg7
8tg8
9tg9
10tg10
11tg11
12tg12
13tg13
14tg14
15tg15
16tg16
 .1.3.6.1.4.1.9.10.10.1.9.2.1.2

rmTrafficShaperIfTable

table
.1.3.6.1.4.1.9.10.10.1.10.1 · 1 row entry · 14 columns
Open in standard view 
The (conceptual) table containing ATM Traffic 
Shaper configuration  and state information for 
ATM interfaces.
rmTrafficShaperIfEntry entry .1.3.6.1.4.1.9.10.10.1.10.1.1
An entry (conceptual row) in the rmTrafficShaperIfTable
containing Traffic Shaper configuration and state
information for an ATM interface. The particular
interface is identified by the value of MIB-II's
ifIndex.
Indexes
Column Syntax OID
rtsIfMaxThreshold
This object reflects the value of the Maximum
Threshold installed in the traffic shaper hardware
for this interface. This object is expressed in
number of cell buffers. This object is not
instantiated for interface…
cellsUnsigned32
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.9.10.10.1.10.1.1.1
rtsIfCellCount
This object contains the count of cells queued to
this interface in the traffic shaping hardware.
This object is not instantiated for interfaces to
which it cannot be applied.
cellsSNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.10.1.10.1.1.2
rtsIfVbrCfgRequested
If this object is set to the value 'shapingDisable',
VBR connections(VC or VP) on this interface will not
be shaped. If the object is set to the value
'shapeToScrAndPcr', the VBR (VC or VP) connections on
this inter…
Enumerationr/w
Enumerated Values:
1shapingDisable
2shapeToPcr
3shapeToScrAndPcr
 .1.3.6.1.4.1.9.10.10.1.10.1.1.3
rtsIfVbrCfgInstalled
This object reflects the current VBR Traffic Shaping
configuration installed in the hardware. This object
is not instantiated for interfaces to which it cannot
be applied.
Enumeration
Enumerated Values:
1shapingDisable
2shapeToPcr
3shapeToScrAndPcr
 .1.3.6.1.4.1.9.10.10.1.10.1.1.4
rtsIfBeCfgRequested
This object reflects the traffic shaping configuration
applied to Best-Effort Connections(VC or VP) belonging
to UBR and ABR service categories on this interface.
If this object is set to the value 'shapingDisable',
…
Enumerationr/w
Enumerated Values:
1shapingDisable
2shapeToPcr
 .1.3.6.1.4.1.9.10.10.1.10.1.1.5
rtsIfBeCfgInstalled
This object reflects the current Best-Effort Traffic
Shaping configuration installed in the hardware.
This object is not instantiated for interfaces to
which it cannot be applied.
Enumeration
Enumerated Values:
1shapingDisable
2shapeToPcr
 .1.3.6.1.4.1.9.10.10.1.10.1.1.6
rtsIfVbrClassMaxThrshRequested
This object specifies the Traffic Shaper Maximum
Cell Buffer Threshold for the VBR Traffic Class.
The value of this object is expressed as a percent
of the value of rtsIfMaxThreshold object. A set
request for this obj…
percentInteger32r/w
Constraints:
range: 1-95
 .1.3.6.1.4.1.9.10.10.1.10.1.1.7
rtsIfVbrClassMaxThrshInstalled
This object reflects the value of Maximum Class
Threshold for VBR Traffic Class, in number of
cell buffers, that is installed in the Traffic
Shaping hardware. This object is not instantiated
for interfaces to which i…
cellsUnsigned32
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.9.10.10.1.10.1.1.8
rtsIfBeClassMaxThrshRequested
This object specifies the Traffic Shaper Maximum Cell
Buffer Threshold for the Best-Effort Traffic Class.
The value of this object is expressed as a percent of
the value of rtsIfMaxThreshold object. A set request
for…
percentInteger32r/w
Constraints:
range: 1-95
 .1.3.6.1.4.1.9.10.10.1.10.1.1.9
rtsIfBeClassMaxThrshInstalled
This object reflects the value of Maximum Class
Threshold for Best-Effort Traffic Class, in number
of cell buffers, that is installed in the Traffic
Shaping hardware. This object is not instantiated
for interfaces t…
cellsUnsigned32
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.9.10.10.1.10.1.1.10
rtsIfVbrVcMaxThrshRequested
This object reflects the Maximum Threshold of the
per-connection queues of VBR connections(VCs or VPs) in
the traffic shaping hardware. The value of this object
is expressed in number of cell buffers. Any change made…
cellsUnsigned32r/w
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.9.10.10.1.10.1.1.11
rtsIfVbrVcMaxThrshInstalled
This object reflects the Maximum Threshold for the
per-connection queues of VBR connections(VCs or VPs)
that is installed in the Traffic Shaping hardware.
The value of this object is expressed in number of
cell buffer…
cellsUnsigned32
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.9.10.10.1.10.1.1.12
rtsIfBeVcMaxThrshRequested
This object reflects the Maximum Threshold of the
per-connection queues of best-effort connections(VCs
or VPs) in the traffic shaping hardware. The value
of this object is expressed in number of cell
buffers. Any cha…
cellsUnsigned32r/w
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.9.10.10.1.10.1.1.13
rtsIfBeVcMaxThrshInstalled
This object reflects the Maximum Threshold for the
per-connection queues of Best-Effort connections(VCs
or VPs) that is installed in the Traffic Shaping
hardware. The value of this object is expressed
in number of c…
cellsUnsigned32
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.9.10.10.1.10.1.1.14