rmIfOutPacingRateInstalled
CISCO-ATM-RM-MIB ·
.1.3.6.1.4.1.9.10.10.1.3.3.1.2
Object
The output pacing value, in kilobits per second, in effect. A value of 0 indicates output pacing is disabled. This object is not instantiated for interfaces to which it cannot be applied.
Context
- MIB
- CISCO-ATM-RM-MIB
- OID
.1.3.6.1.4.1.9.10.10.1.3.3.1.2- Type
- column
- Access
- readonly
- Status
- current
- Units
- kilobits-per-second
- Parent
- rmIfCfgEntry
- Table
- rmIfCfgTable
- Siblings
- 19
Syntax
kilobits-per-second SNMPv2-SMIUnsigned32
- Source
- SNMPv2-SMIUnsigned32
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| rmIfOutPacingRateRequested This object reflects an explicit configuration of the
state of pacing for this interface. If the value of this
object is 0, pacing is disabled on this interface.
Prior to any us… | column | kilobits-per-second SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.10.1.3.3.1.1 |
| rmIfUbrDefaultRxUpcTolerance Specifies the GCRA limit parameter used for policing
of a receive cell-stream of a UBR connection on an interface,
if the limit parameter is not specified explicitly in the
connec… | column | cell-times SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.10.1.3.3.1.10 |
| rmIfVbrRtDefaultRxUpcCdvt Specifies the GCRA limit parameter used for peak-rate
policing of a receive cell-stream of a VBR-RT connection
on an interface, if the CDVT parameter is not specified
explicitly i… | column | cell-times SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.10.1.3.3.1.11 |
| rmIfVbrNrtDefaultRxUpcCdvt Specifies the GCRA limit parameter used for peak-rate
policing of a receive cell-stream of a VBR-NRT connection
on an interface, if the CDVT parameter is not specified
explicitly … | column | cell-times SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.10.1.3.3.1.12 |
| rmIfServCategorySupport The value of this object controls and reflects the
Service Category(s) supported on this ATM interface.
If a bit is set, the corresponding Service Category
is suppo… | column | Integer32 | .1.3.6.1.4.1.9.10.10.1.3.3.1.13 |
| rmIfFramingOverhead If this object is set to true, framing overhead will be taken
into account in determining the Maximum Cell Rate that is
possible on this interface. If this object is set to false,… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.10.10.1.3.3.1.14 |
| rmIfFramingOverheadForce A Set Request for rmIfFramingOverhead that does not reduce
the Maximum Guaranteed Services Bandwidth of this interface
below the currently allocated bandwidth guarantees always
su… | column | ForceValue | .1.3.6.1.4.1.9.10.10.1.3.3.1.15 |
| rmIfOverBooking This object specifies overbooking on this interface as
a percentage of the Maximum Cell Rate that is possible
on this interface. If the value of this object is 100,
overbooking is… | column | percent Integer32 | .1.3.6.1.4.1.9.10.10.1.3.3.1.16 |
| rmIfVbrRtPerClassOverbooking This object specifies the Per Class Overbooking
percentage for VBR-rt service category on this
interface. If the value of this object is 100,
Per Class Overbooking for VBR-rt i… | column | percent Integer32 | .1.3.6.1.4.1.9.10.10.1.3.3.1.17 |
| rmIfVbrNrtPerClassOverbooking This object specifies the Per Class Overbooking
percentage for VBR-Nrt service category on this
interface. If the value of this object is 100,
Per Class Overbooking for VBR-Nrt is… | column | percent Integer32 | .1.3.6.1.4.1.9.10.10.1.3.3.1.18 |
| rmIfAbrPerClassOverbooking This object specifies the Per Class Overbooking
percentage for ABR service category on this
interface. If the value of this object is 100,
Per Class Overbooking for ABR is disable… | column | percent Integer32 | .1.3.6.1.4.1.9.10.10.1.3.3.1.19 |
| rmIfUbrPerClassOverbooking This object specifies the Per Class Overbooking
percentage for UBR service category on this
interface. If the value of this object is 100,
Per Class Overbooking for UBR is disable… | column | percent Integer32 | .1.3.6.1.4.1.9.10.10.1.3.3.1.20 |
| rmIfOutPacingForce A Set Request for rmIfOutPacingRateRequested that does not
reduce the port rate below the currently allocated bandwidth
guarantees for the output flow always succeeds irrespective… | column | ForceValue | .1.3.6.1.4.1.9.10.10.1.3.3.1.3 |
| rmIfLinkDistance The link distance defined for the interface, expressed
in kilometers. This is then divided by the speed of light
to determine a propagation delay. | column | kilometers Unsigned32 | .1.3.6.1.4.1.9.10.10.1.3.3.1.4 |
| rmIfBestEffortLimit The limit on the number of Best Effort connections that
can be established on this interface. Note that a change
to this value affects subsequent connection setup, not
existing co… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.10.1.3.3.1.5 |
| rmIfCbrDefaultRxUpcTolerance Specifies the GCRA limit parameter used for policing
of a receive cell-stream of a CBR connection on an interface,
if the limit parameter is not specified explicitly in the
connec… | column | cell-times SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.10.1.3.3.1.6 |
| rmIfVbrRtDefaultRxUpcTolerance Specifies the maximum burst size parameter used for policing
of a receive cell-stream of a VBR-RT connection on an
interface, if this parameter is not specified
explicitly in the … | column | cell-times SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.10.1.3.3.1.7 |
| rmIfVbrNrtDefaultRxUpcTolerance Specifies the maximum burst size parameter used for policing
of a receive cell-stream of a VBR-NRT connection on an
interface, if this parameter is not specified
explicitly in the… | column | cell-times SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.10.1.3.3.1.8 |
| rmIfAbrDefaultRxUpcTolerance Specifies the GCRA limit parameter used for policing
of a receive cell-stream of an ABR connection on an interface,
if the limit parameter is not specified explicitly in the
conne… | column | cell-times SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.10.1.3.3.1.9 |