rmIfScTxP2PeakCdv
CISCO-ATM-RM-MIB ·
.1.3.6.1.4.1.9.10.10.1.4.1.1.9
Object
The Peak-to-Peak Cell Delay Variation estimated to be experienced by cells of connections transmitted out this interface of this Service Category. This estimate does not distinguish between clp0 and clp1 cells. This object is valid for Service Categories cbr and vbr-rt. For other Service Categories, the object is not defined.
Context
- MIB
- CISCO-ATM-RM-MIB
- OID
.1.3.6.1.4.1.9.10.10.1.4.1.1.9- Type
- column
- Access
- readonly
- Status
- current
- Units
- microseconds
- Parent
- rmIfServiceCategoryStateEntry
- Table
- rmIfServiceCategoryStateTable
- Siblings
- 12
Syntax
microseconds SNMPv2-SMIGauge32
- Source
- SNMPv2-SMIGauge32
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| rmIfSc The Service Category to which the row applies. | column | Enumeration | .1.3.6.1.4.1.9.10.10.1.4.1.1.1 |
| rmIfScTxClr The Cell Loss Ratio estimated to be experienced by cells
of connections transmitted out this interface of this Service
Category. This is an estimate for clp0 cells only. The uni… | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.9.10.10.1.4.1.1.10 |
| rmIfScTxClrClp01 The Cell Loss Ratio estimated to be experienced by cells
of connections transmitted out this interface of this Service
Category. This is an estimate for clp0+1 cells. The unit o… | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.9.10.10.1.4.1.1.11 |
| rmIfScRxDynBwSvcAcr The Available Cell Rate (specified in cells per second) for traffic
received on the interface for this Service Category. This object
is valid only for IMA physical interfaces. … | column | cells-per-second SNMPv2-SMIGauge32 | .1.3.6.1.4.1.9.10.10.1.4.1.1.12 |
| rmIfScTxDynBwSvcAcr The Available Cell Rate (specified in cells per second) for traffic
transmitted on the interface for this Service Category. This
object is valid only for IMA physical interfaces… | column | cells-per-second SNMPv2-SMIGauge32 | .1.3.6.1.4.1.9.10.10.1.4.1.1.13 |
| rmIfScRxAcr The Available Cell Rate (specified in cells per second) for
traffic received on the interface for this Service Category.
This is the bandwidth available for connections. For
CBR a… | column | cells-per-second SNMPv2-SMIGauge32 | .1.3.6.1.4.1.9.10.10.1.4.1.1.2 |
| rmIfScTxAcr The Available Cell Rate (specified in cells per second) for
traffic sent out the interface for this Service Category.
This is the bandwidth available for connections. For
CBR and … | column | cells-per-second SNMPv2-SMIGauge32 | .1.3.6.1.4.1.9.10.10.1.4.1.1.3 |
| rmIfScRxAlcr The Allocated Cell Rate (specified in cells per second) for
traffic received on the interface for this Service Category.
This is the bandwidth allocated-to connections. For
CBR an… | column | cells-per-second SNMPv2-SMIGauge32 | .1.3.6.1.4.1.9.10.10.1.4.1.1.4 |
| rmIfScTxAlcr The Allocated Cell Rate (specified in cells per second) for
traffic sent out the interface for this Service Category.
This is the bandwidth allocated-to connections. For
Guarantee… | column | cells-per-second SNMPv2-SMIGauge32 | .1.3.6.1.4.1.9.10.10.1.4.1.1.5 |
| rmIfScNumSvxConns The number of signalled connections (VC or VP) of this
Service Category currently allocated on the interface. | column | number of connections SNMPv2-SMIGauge32 | .1.3.6.1.4.1.9.10.10.1.4.1.1.6 |
| rmIfScNumPvxConns The number of permanent connections (VC or VP) of this
Service Category currently allocated on the interface. | column | number of connections SNMPv2-SMIGauge32 | .1.3.6.1.4.1.9.10.10.1.4.1.1.7 |
| rmIfScTxMaxCtd The maximum Cell Transfer Delay estimated to be experienced by
cells of connections transmitted out this interface of this
Service Category. This is estimate does not distinguish… | column | microseconds SNMPv2-SMIGauge32 | .1.3.6.1.4.1.9.10.10.1.4.1.1.8 |