CISCO-ATM-IF-PHYS-MIB Table View
Table-centric layout grouping table, row, and column objects.
Tables
1
Rows
1
Columns
21
ciscoAtmIfPhysTable
table.1.3.6.1.4.1.9.9.45.1.1
·
1 row entry
·
21 columns
A table containing basic status and statistics for the physical layer of ATM interfaces.
Basic status and statistics for the physical layer of
an ATM interface.
an ATM interface.
Indexes
RFC1213-MIBifIndex
| Column | Syntax | OID | ||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
ciscoAtmIfPhysStatus
The status of the physical interface. The value of this
object is only valid when the interface's ifAdminStatus has the value 'up'. Note that some of the enumerated values are specific to a particular physical layer. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.9.9.45.1.1.1.1 |
||||||||||||||||||||||||||||||||||
|
ciscoAtmIfPhysSectionParityErrors
The number of B1 (BIP) errors on the physical interface.
This object is only present for SONET interfaces. |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.45.1.1.1.2 |
||||||||||||||||||||||||||||||||||
|
ciscoAtmIfPhysLineParityErrors
The number of B2 (BIP) errors on the physical interface.
This object is only present for SONET interfaces. |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.45.1.1.1.3 |
||||||||||||||||||||||||||||||||||
|
ciscoAtmIfPhysPathParityErrors
The number of B3 (BIP) errors on the physical interface.
This object is only present for SONET interfaces. |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.45.1.1.1.4 |
||||||||||||||||||||||||||||||||||
|
ciscoAtmIfPhysLcvErrors
The number of Line Code Violation errors on the physical
interface. This object is only present for DS3/E3/DS1/E1 interfaces. |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.45.1.1.1.5 |
||||||||||||||||||||||||||||||||||
|
ciscoAtmIfPhysCBitParityErrors
The number of C-bit parity violations on the physical
interface. This object is only present for DS3 interfaces. |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.45.1.1.1.6 |
||||||||||||||||||||||||||||||||||
|
ciscoAtmIfPhysPBitParityErrors
The number of P-bit parity violations or E3 G.832 BIP-8
errors on the physical interface. This object is present only for DS3/E3 interfaces. |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.45.1.1.1.7 |
||||||||||||||||||||||||||||||||||
|
ciscoAtmIfPhysPlcpBipViolations
The number of PLCP BIP violations on the physical
interface. This object is only present for DS3/E3/DS1/E1 interfaces. |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.45.1.1.1.8 |
||||||||||||||||||||||||||||||||||
|
ciscoAtmIfPhysLineFebeErrors
The number of Z2 (Line FEBE) errors on the physical interface.
This object is only present for SONET interfaces. |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.45.1.1.1.9 |
||||||||||||||||||||||||||||||||||
|
ciscoAtmIfPhysPathFebeErrors
The number of G1 (Path FEBE) errors on the physical interface.
This object is only present for SONET interfaces. |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.45.1.1.1.10 |
||||||||||||||||||||||||||||||||||
|
ciscoAtmIfPhysCellPayloadScrambling
The status of whether cell payload scrambling is
enabled or disabled on the physical interface. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.9.9.45.1.1.1.11 |
||||||||||||||||||||||||||||||||||
|
ciscoAtmIfPhysStsStreamScrambling
The status of whether STS-stream scrambling is
enabled or disabled on the physical interface. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.9.9.45.1.1.1.12 |
||||||||||||||||||||||||||||||||||
|
ciscoAtmIfPhysFramingMode
The framing format present on the physical interface.
'sonet' indicates sts-3c or sts-12c format and applies only to OC-3 and OC-12 type interfaces, respectively. 'sdh' indicates stm1 or st… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.9.9.45.1.1.1.13 |
||||||||||||||||||||||||||||||||||
|
ciscoAtmIfPhysLoopbackConfig
The loopback configured on the physical interface:
'noLoop' indicates no loopback is present. 'diagnosticLoop' indicates transmit data stream is looped to the receive direction. … |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.9.9.45.1.1.1.14 |
||||||||||||||||||||||||||||||||||
|
ciscoAtmIfPhysLineBuildOut
The line buildout configured on the transmit signal:
'e3AllCables' applies to all cables of E3 physical interfaces. 'ds3CablesUnder225' applies to cables under 225 feet of DS3 physical inte… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.9.9.45.1.1.1.15 |
||||||||||||||||||||||||||||||||||
|
ciscoAtmIfPhysTransmitClockSource
The source of the tranmit clock:
'loopTiming' indicates that the recovered receive clock is used as the transmit clock. 'freeRunning' indicates that a local clock source is used. … |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.9.9.45.1.1.1.16 |
||||||||||||||||||||||||||||||||||
|
ciscoAtmIfPhysClockSourcePriority
The priority of this interface if configured as
a network clock source. 'notConfigured' indicates this is not configured as a network clock source. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.9.9.45.1.1.1.17 |
||||||||||||||||||||||||||||||||||
|
ciscoAtmIfPhysClockSourceStatus
The network clock source status of this interface:
'notSelected' indicates this is not selected as the network clock source. 'selected' indicates this is selected as the network clock sourc… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.9.9.45.1.1.1.18 |
||||||||||||||||||||||||||||||||||
|
ciscoAtmIfPhysDS1BitErrors
The number of bit errors (CRC-6 error in ESF mode and
framing bit error in SF mode) on the physical interface. This object is only present for DS1 interfaces. |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.45.1.1.1.19 |
||||||||||||||||||||||||||||||||||
|
ciscoAtmIfPhysE1CrcErrors
The number of CRC errors (in CRC-4 mode) on the physical
interface. This object is only present for E1 interfaces. |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.45.1.1.1.20 |
||||||||||||||||||||||||||||||||||
|
ciscoAtmIfPhysLineCode
The line coding present on the physical interface This object
is only present for DS1/E1 interfaces. 'ami' indicates alternate mark inversion (AMI) line code on the DS1/E1 interface. 'b8… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.9.9.45.1.1.1.21 |