ciscoAtmIfPhysLcvErrors
CISCO-ATM-IF-PHYS-MIB ·
.1.3.6.1.4.1.9.9.45.1.1.1.5
Object
column
SNMPv2-SMICounter32
The number of Line Code Violation errors on the physical interface. This object is only present for DS3/E3/DS1/E1 interfaces.
Context
- MIB
- CISCO-ATM-IF-PHYS-MIB
- OID
.1.3.6.1.4.1.9.9.45.1.1.1.5- Type
- column
- Access
- readonly
- Status
- current
- Parent
- ciscoAtmIfPhysEntry
- Table
- ciscoAtmIfPhysTable
- Siblings
- 20
Syntax
SNMPv2-SMICounter32
- Source
- SNMPv2-SMICounter32
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| ciscoAtmIfPhysStatus The status of the physical interface. The value of this
object is only valid when the interface's ifAdminStatus
has the value 'up'. Note that some of the enumerated
values are s… | column | Enumeration | .1.3.6.1.4.1.9.9.45.1.1.1.1 |
| ciscoAtmIfPhysPathFebeErrors The number of G1 (Path FEBE) errors on the physical interface.
This object is only present for SONET interfaces. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.9.45.1.1.1.10 |
| ciscoAtmIfPhysCellPayloadScrambling The status of whether cell payload scrambling is
enabled or disabled on the physical interface. | column | Enumeration | .1.3.6.1.4.1.9.9.45.1.1.1.11 |
| ciscoAtmIfPhysStsStreamScrambling The status of whether STS-stream scrambling is
enabled or disabled on the physical interface. | column | Enumeration | .1.3.6.1.4.1.9.9.45.1.1.1.12 |
| ciscoAtmIfPhysFramingMode The framing format present on the physical interface.
'sonet' indicates sts-3c or sts-12c format and applies only
to OC-3 and OC-12 type interfaces, respectively.
… | column | Enumeration | .1.3.6.1.4.1.9.9.45.1.1.1.13 |
| ciscoAtmIfPhysLoopbackConfig The loopback configured on the physical interface:
'noLoop' indicates no loopback is present.
'diagnosticLoop' indicates transmit data stream is
loop… | column | Enumeration | .1.3.6.1.4.1.9.9.45.1.1.1.14 |
| ciscoAtmIfPhysLineBuildOut The line buildout configured on the transmit signal:
'e3AllCables' applies to all cables of E3 physical
interfaces.
'ds3CablesUnder225' applies to ca… | column | Enumeration | .1.3.6.1.4.1.9.9.45.1.1.1.15 |
| ciscoAtmIfPhysTransmitClockSource The source of the tranmit clock:
'loopTiming' indicates that the recovered receive
clock is used as the transmit clock.
'freeRunning' indicates that … | column | Enumeration | .1.3.6.1.4.1.9.9.45.1.1.1.16 |
| ciscoAtmIfPhysClockSourcePriority The priority of this interface if configured as
a network clock source.
'notConfigured' indicates this is not configured as
a network clock source. | column | Enumeration | .1.3.6.1.4.1.9.9.45.1.1.1.17 |
| ciscoAtmIfPhysClockSourceStatus The network clock source status of this interface:
'notSelected' indicates this is not selected as the
network clock source.
'selected' indicates thi… | column | Enumeration | .1.3.6.1.4.1.9.9.45.1.1.1.18 |
| ciscoAtmIfPhysDS1BitErrors The number of bit errors (CRC-6 error in ESF mode and
framing bit error in SF mode) on the physical
interface. This object is only present for DS1
interfaces. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.9.45.1.1.1.19 |
| ciscoAtmIfPhysSectionParityErrors The number of B1 (BIP) errors on the physical interface.
This object is only present for SONET interfaces. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.9.45.1.1.1.2 |
| ciscoAtmIfPhysE1CrcErrors The number of CRC errors (in CRC-4 mode) on the physical
interface. This object is only present for E1
interfaces. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.9.45.1.1.1.20 |
| ciscoAtmIfPhysLineCode The line coding present on the physical interface This object
is only present for DS1/E1 interfaces.
'ami' indicates alternate mark inversion (AMI) line code
on t… | column | Enumeration | .1.3.6.1.4.1.9.9.45.1.1.1.21 |
| ciscoAtmIfPhysLineParityErrors The number of B2 (BIP) errors on the physical interface.
This object is only present for SONET interfaces. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.9.45.1.1.1.3 |
| ciscoAtmIfPhysPathParityErrors The number of B3 (BIP) errors on the physical interface.
This object is only present for SONET interfaces. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.9.45.1.1.1.4 |
| ciscoAtmIfPhysCBitParityErrors The number of C-bit parity violations on the physical
interface. This object is only present for DS3
interfaces. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.9.45.1.1.1.6 |
| ciscoAtmIfPhysPBitParityErrors The number of P-bit parity violations or E3 G.832 BIP-8
errors on the physical
interface. This object is present only for DS3/E3
interfaces. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.9.45.1.1.1.7 |
| ciscoAtmIfPhysPlcpBipViolations The number of PLCP BIP violations on the physical
interface. This object is only present for DS3/E3/DS1/E1
interfaces. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.9.45.1.1.1.8 |
| ciscoAtmIfPhysLineFebeErrors The number of Z2 (Line FEBE) errors on the physical interface.
This object is only present for SONET interfaces. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.9.45.1.1.1.9 |