ciscoAtmIfPhysFramingMode

CISCO-ATM-IF-PHYS-MIB · .1.3.6.1.4.1.9.9.45.1.1.1.13
MIB view Table view

Object

column r/w Enumeration 
The framing format present on the physical interface.
              
'sonet' indicates sts-3c or sts-12c format and applies only
to OC-3 and OC-12 type interfaces, respectively.
              
'sdh' indicates stm1 or stm4 format and applies only to
OC-3 and OC-12 type interfaces, respectively.
              
'ds3m23adm' indicates M23 ADM mode and applies only to DS3
type interfaces.
              
'ds3m23plcp' indicates M23 PLCP mode and applies only to DS3
type interfaces.
              
'ds3cbitadm' indicates C-BIT ADM mode and applies only to DS3
type interfaces.
              
'ds3cbitplcp' indicates C-BIT PLCP mode and applies only to DS3
type interfaces.
              
'e3g832adm' indicates G.832 ADM mode and applies only to E3
type interfaces.
              
'e3g751adm' indicates G.751 ADM mode and applies only to E3
type interfaces.
              
'e3g751plcp' indicates G.751 PLCP mode and applies only to E3
type interfaces.
              
'ds1sfadm' indicates DS1 SF ADM mode and applies only to DS1
type interfaces.
              
'ds1esfadm' indicates DS1 ESF ADM mode and applies only to DS1
type interfaces.
              
'ds1sfplcp' indicates DS1 SF PLCP mode and applies only to DS1
type interfaces.
              
'ds1esfplcp' indicates DS1 ESF PLCP mode and applies only to DS1
type interfaces.
              
'e1adm' indicates E1 ADM mode and applies only to E1
type interfaces.
              
'e1plcp' indicates E1 PLCP mode and applies only to E1
type interfaces.
              
'e1crcadm' indicates E1 CRC-4 ADM mode and applies only to E1
type interfaces.
              
'e1crcplcp' indicates E1 CRC-4 PLCP mode and applies only to E1
type interfaces.

Context

MIB
CISCO-ATM-IF-PHYS-MIB
OID
.1.3.6.1.4.1.9.9.45.1.1.1.13
Type
column
Access
readwrite
Status
current
Parent
ciscoAtmIfPhysEntry
Table
ciscoAtmIfPhysTable
Siblings
20

Syntax

Enumeration

Values & Constraints

Enumerated Values
1sonet
2sdh
3ds3m23adm
4ds3m23plcp
5ds3cbitadm
6ds3cbitplcp
7e3g832adm
8e3g751adm
9e3g751plcp
10ds1sfadm
11ds1esfadm
12ds1sfplcp
13ds1esfplcp
14e1adm
15e1plcp
16e1crcadm
17e1crcplcp

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
ciscoAtmIfPhysStatus
The status of the physical interface. The value of this object is only valid when the interface's ifAdminStatus has the value 'up'. Note that some of the enumerated values are s…
columnEnumeration.1.3.6.1.4.1.9.9.45.1.1.1.1
ciscoAtmIfPhysPathFebeErrors
The number of G1 (Path FEBE) errors on the physical interface. This object is only present for SONET interfaces.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.9.9.45.1.1.1.10
ciscoAtmIfPhysCellPayloadScrambling
The status of whether cell payload scrambling is enabled or disabled on the physical interface.
columnEnumeration.1.3.6.1.4.1.9.9.45.1.1.1.11
ciscoAtmIfPhysStsStreamScrambling
The status of whether STS-stream scrambling is enabled or disabled on the physical interface.
columnEnumeration.1.3.6.1.4.1.9.9.45.1.1.1.12
ciscoAtmIfPhysLoopbackConfig
The loopback configured on the physical interface: 'noLoop' indicates no loopback is present. 'diagnosticLoop' indicates transmit data stream is loop…
columnEnumeration.1.3.6.1.4.1.9.9.45.1.1.1.14
ciscoAtmIfPhysLineBuildOut
The line buildout configured on the transmit signal: 'e3AllCables' applies to all cables of E3 physical interfaces. 'ds3CablesUnder225' applies to ca…
columnEnumeration.1.3.6.1.4.1.9.9.45.1.1.1.15
ciscoAtmIfPhysTransmitClockSource
The source of the tranmit clock: 'loopTiming' indicates that the recovered receive clock is used as the transmit clock. 'freeRunning' indicates that …
columnEnumeration.1.3.6.1.4.1.9.9.45.1.1.1.16
ciscoAtmIfPhysClockSourcePriority
The priority of this interface if configured as a network clock source. 'notConfigured' indicates this is not configured as a network clock source.
columnEnumeration.1.3.6.1.4.1.9.9.45.1.1.1.17
ciscoAtmIfPhysClockSourceStatus
The network clock source status of this interface: 'notSelected' indicates this is not selected as the network clock source. 'selected' indicates thi…
columnEnumeration.1.3.6.1.4.1.9.9.45.1.1.1.18
ciscoAtmIfPhysDS1BitErrors
The number of bit errors (CRC-6 error in ESF mode and framing bit error in SF mode) on the physical interface. This object is only present for DS1 interfaces.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.9.9.45.1.1.1.19
ciscoAtmIfPhysSectionParityErrors
The number of B1 (BIP) errors on the physical interface. This object is only present for SONET interfaces.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.9.9.45.1.1.1.2
ciscoAtmIfPhysE1CrcErrors
The number of CRC errors (in CRC-4 mode) on the physical interface. This object is only present for E1 interfaces.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.9.9.45.1.1.1.20
ciscoAtmIfPhysLineCode
The line coding present on the physical interface This object is only present for DS1/E1 interfaces. 'ami' indicates alternate mark inversion (AMI) line code on t…
columnEnumeration.1.3.6.1.4.1.9.9.45.1.1.1.21
ciscoAtmIfPhysLineParityErrors
The number of B2 (BIP) errors on the physical interface. This object is only present for SONET interfaces.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.9.9.45.1.1.1.3
ciscoAtmIfPhysPathParityErrors
The number of B3 (BIP) errors on the physical interface. This object is only present for SONET interfaces.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.9.9.45.1.1.1.4
ciscoAtmIfPhysLcvErrors
The number of Line Code Violation errors on the physical interface. This object is only present for DS3/E3/DS1/E1 interfaces.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.9.9.45.1.1.1.5
ciscoAtmIfPhysCBitParityErrors
The number of C-bit parity violations on the physical interface. This object is only present for DS3 interfaces.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.9.9.45.1.1.1.6
ciscoAtmIfPhysPBitParityErrors
The number of P-bit parity violations or E3 G.832 BIP-8 errors on the physical interface. This object is present only for DS3/E3 interfaces.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.9.9.45.1.1.1.7
ciscoAtmIfPhysPlcpBipViolations
The number of PLCP BIP violations on the physical interface. This object is only present for DS3/E3/DS1/E1 interfaces.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.9.9.45.1.1.1.8
ciscoAtmIfPhysLineFebeErrors
The number of Z2 (Line FEBE) errors on the physical interface. This object is only present for SONET interfaces.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.9.9.45.1.1.1.9