CIENA-CES-BENCHMARK-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view

Tables

Rows

Columns

243

cienaCesBenchmarkEntityTable

table

.1.3.6.1.4.1.1271.2.1.39.1.1.2 · 1 row entry · 24 columns

Open in standard view

Table of benchmark entity entries.

cienaCesBenchmarkEntityEntry entry .1.3.6.1.4.1.1271.2.1.39.1.1.2.1

BENCHMARK Entity characteristics.

Indexes

cienaCesBenchmarkEntityEntryId

Column Syntax OID

cienaCesBenchmarkEntityEntryId

Entity unique ID

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.1271.2.1.39.1.1.2.1.1

cienaCesBenchmarkEntityEntryName

Name of the benchmark entity as entered when created.

OctetStringr/w

Constraints:
range: 1-46

.1.3.6.1.4.1.1271.2.1.39.1.1.2.1.2

cienaCesBenchmarkEntityEntryRole

Entity role

Enumerationr/w

Enumerated Values:

1	none
2	reflector
3	generator

.1.3.6.1.4.1.1271.2.1.39.1.1.2.1.3

cienaCesBenchmarkEntityEntryPortId

Entity port under test

Integer32r/w

Constraints:
range: 1-65535

.1.3.6.1.4.1.1271.2.1.39.1.1.2.1.4

cienaCesBenchmarkEntityEntryMode

Entity mode

Enumerationr/w

Enumerated Values:

1	none
2	inService
3	outOfService
4	vidOutOfService
5	evcOutOfService

.1.3.6.1.4.1.1271.2.1.39.1.1.2.1.5

cienaCesBenchmarkEntityEntryAdminState

Entity admin state.

CienaCesBenchmarkAdminStater/w

Textual Convention: CienaCesBenchmarkAdminState Enumeration

Type Values:

1	disabled
2	enabled

.1.3.6.1.4.1.1271.2.1.39.1.1.2.1.6

cienaCesBenchmarkEntityEntryLocalMac

The FPGA internal test port assigned mac address.

SNMPv2-TCMacAddress

Textual Convention: SNMPv2-TCMacAddress OctetString

Type Constraints:
range: 6

.1.3.6.1.4.1.1271.2.1.39.1.1.2.1.7

cienaCesBenchmarkEntityEntrySlotId

The slot Id of the line module associated
with this entity.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.1271.2.1.39.1.1.2.1.8

cienaCesBenchmarkEntityEntryReflectorVendorType

Indicator as to what type of equipment is generating the
test traffic on the remote end.

Enumerationr/w

Enumerated Values:

1	other
2	ciena

.1.3.6.1.4.1.1271.2.1.39.1.1.2.1.9

cienaCesBenchmarkEntityEntryReflectionLevel

For reflector entities, this indicates the minimum reflection
level required. If test traffic is going over an ethernet L2
cloud, l2-only is fine. But if the test traffic is going over
an IP network, the reflector needs…

Enumerationr/w

Enumerated Values:

1	none
2	l2only
3	l2ToL3IPv4only
4	l2ToL3IPv6only
5	l2ToL4IPv4only
6	l2ToL4IPv6only
7	l2ToL4

.1.3.6.1.4.1.1271.2.1.39.1.1.2.1.10

cienaCesBenchmarkEntityEntryGeneratorHFrameSize

Maximum frame size that should be generated by the generator
device. This H frame size should to leave enough room for
extra encapsulation bytes that will be pushed onto the
packet by the switch when pushing this test …

Integer32r/w

Constraints:
range: 64-9216

.1.3.6.1.4.1.1271.2.1.39.1.1.2.1.11

cienaCesBenchmarkEntityEntryMaxConfigTestInstances

Maximum number of test instances that can
be configured on this entity.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.1271.2.1.39.1.1.2.1.12

cienaCesBenchmarkEntityEntryMaxSimultaneousTestInstances

Maximum number of test instances that can
be enabled (reflector) or running (generator)
on this entity, given the availability of
hw sessions.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.1271.2.1.39.1.1.2.1.13

cienaCesBenchmarkEntityEntryOperEnabled

Entity operational enable/disable. An entity
is operationally enabled when the feature is
enabled, the entity is enabled and at least one
test instance associated with that entity is
enabled (reflector) or running (gen…

SNMPv2-TCTruthValue

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.1271.2.1.39.1.1.2.1.14

cienaCesBenchmarkEntityEntryNumTestInstancesConfigured

Number of test instances currently configured
on this entity.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.1271.2.1.39.1.1.2.1.15

cienaCesBenchmarkEntityEntryNumTestInstancesEnabled

Number of test instances currently enabled.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.1271.2.1.39.1.1.2.1.16

cienaCesBenchmarkEntityEntryGenNumTestInstancesRunning

Number of test instances currently running.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.1271.2.1.39.1.1.2.1.17

cienaCesBenchmarkEntityEntryBwAvailable

Bandwidth available for test traffic if
a reflector. Bandwidth remaining for other
test instances to be started if a generator.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.1271.2.1.39.1.1.2.1.18

cienaCesBenchmarkEntityEntryGenBwUsedByRunningTests

Bandwidth currently used by test instances
currently running, in Mbps.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.1271.2.1.39.1.1.2.1.19

cienaCesBenchmarkEntityEntryAvailableHwSessions

Maximum number of simultaneous hardware sessions available
on this platform.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.1271.2.1.39.1.1.2.1.20

cienaCesBenchmarkEntityEntryAllocatedHwSessions

The number of allocated hardware sessions

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.1271.2.1.39.1.1.2.1.21

cienaCesBenchmarkEntityEntryRowStatus

Used to manage the creation and deletion of the
conceptual rows in this table. To create a row in
this table, set this object to 'createAndGo'.
To delete a row in this table, set this object to
'destroy'. If the entry…

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.1271.2.1.39.1.1.2.1.22

cienaCesBenchmarkEntityEntryClearStats

Set to true to clear all global fpga counters for the given entity.
Clear is only allowed for a reflector if no test instances are
enabled, and for a generator if no test instances are running. The
value is reset to fal…

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.1271.2.1.39.1.1.2.1.23

cienaCesBenchmarkEntityEntryReflectorMacValidation

This attribute is only valid for the reflector entity and indicates
whether the reflector verifies that the destination MAC of the test
frames matches the MAC address associated with benchamrk reflector
entity. MAC Val…

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.1271.2.1.39.1.1.2.1.24

cienaCesBenchmarkEntityStatsTable

table

.1.3.6.1.4.1.1271.2.1.39.1.1.3 · 1 row entry · 49 columns

Open in standard view

Table of benchmark entity statistics entries.

cienaCesBenchmarkEntityStatsEntry entry .1.3.6.1.4.1.1271.2.1.39.1.1.3.1

BENCHMARK Entity characteristics.

Indexes

cienaCesBenchmarkEntityEntryId

Column Syntax OID

cienaCesBenchmarkEntityStatsEntryClear obsolete

Set to true to clear all port and/or global fpga
counters for the given entity. Clear is only allowed
for a reflector if no test instances are enabled, and
for a generator if no test instances are running.
The value is …

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.1271.2.1.39.1.1.3.1.1

cienaCesBenchmarkEntityStatsEntryPortTxBytes

Number of bytes transmitted by the benchmark port

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.1271.2.1.39.1.1.3.1.2

cienaCesBenchmarkEntityStatsEntryPortTxPkts

Number of packets transmitted by the benchmark port

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.1271.2.1.39.1.1.3.1.3

cienaCesBenchmarkEntityStatsEntryPortTxCrcErrorPkts

Number of packets with CRC errors

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.1271.2.1.39.1.1.3.1.4

cienaCesBenchmarkEntityStatsEntryPortTxUcastPkts

Number of unicast packets transmitted by the benchmark port

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.1271.2.1.39.1.1.3.1.5

cienaCesBenchmarkEntityStatsEntryPortTxMcastPkts

Number of multicast packets transmitted by the benchmark port

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.1271.2.1.39.1.1.3.1.6

cienaCesBenchmarkEntityStatsEntryPortTxBcastPkts

Number of broadcast packets transmitted by the benchmark port

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.1271.2.1.39.1.1.3.1.7

cienaCesBenchmarkEntityStatsEntryPortRxUndersizePkts

The total number of packets received that were
less than 64 octets long (excluding framing bits,
but including FCS octets) and were otherwise well
formed.

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.1271.2.1.39.1.1.3.1.8

cienaCesBenchmarkEntityStatsEntryPortRxOversizePkts

The total number of packets received that were
longer than 1518 octets (excluding framing bits,
but including FCS octets) and were otherwise
well formed.

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.1271.2.1.39.1.1.3.1.9

cienaCesBenchmarkEntityStatsEntryPortRxFragmentsPkts

The total number of packets received that were less
than 64 octets in length (excluding framing bits but
including FCS octets) and had either a bad Frame
Check Sequence (FCS) with an integral number of
octets (FCS Error…

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.1271.2.1.39.1.1.3.1.10

cienaCesBenchmarkEntityStatsEntryPortRxJabbersPkts

The total number of packets received that were
longer than 1518 octets (excluding framing bits,
but including FCS octets), and had either a bad
Frame Check Sequence (FCS) with an integral number
of octets (FCS Error) or…

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.1271.2.1.39.1.1.3.1.11

cienaCesBenchmarkEntityStatsEntryPortTxPausePkts

The transmit pause packets for the port.

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.1271.2.1.39.1.1.3.1.12

cienaCesBenchmarkEntityStatsEntryPortTxDropPkts

The total number of dropped packets on the benchmark port when
traffic profiles are enabled (311v only).

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.1271.2.1.39.1.1.3.1.13

cienaCesBenchmarkEntityStatsEntryPortTxDiscardPkts

The total number of discarded packets.

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.1271.2.1.39.1.1.3.1.14

cienaCesBenchmarkEntityStatsEntryPortTxLOutRangePkts

The transmit length out of range packet count.

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.1271.2.1.39.1.1.3.1.15

cienaCesBenchmarkEntityStatsEntryPortTx64OctsPkts

Number of 64-byte packets transmitted on the benchmark port.

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.1271.2.1.39.1.1.3.1.16

cienaCesBenchmarkEntityStatsEntryPortTx65To127Pkts

Number of 64 to 127-byte packets transmitted on the
benchmark port.

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.1271.2.1.39.1.1.3.1.17

cienaCesBenchmarkEntityStatsEntryPortTx128To255Pkts

Number of 128 to 255-byte packets transmitted on the
benchmark port.

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.1271.2.1.39.1.1.3.1.18

cienaCesBenchmarkEntityStatsEntryPortTx256To511Pkts

Number of 256 to 511-byte packets transmitted on the
benchmark port.

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.1271.2.1.39.1.1.3.1.19

cienaCesBenchmarkEntityStatsEntryPortTx512To1023Pkts

Number of 512 to 1023-byte packets transmitted on the
benchmark port.

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.1271.2.1.39.1.1.3.1.20

cienaCesBenchmarkEntityStatsEntryPortTx1024To1518Pkts

Number of 1024 to 1518-byte packets transmitted on the
benchmark port.

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.1271.2.1.39.1.1.3.1.21

cienaCesBenchmarkEntityStatsEntryPortTx1519To2047Pkts

Number of 1519 to 2047-byte packets transmitted on the
benchmark port.

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.1271.2.1.39.1.1.3.1.22

cienaCesBenchmarkEntityStatsEntryPortTx2048To4095Pkts

Number of 2048 to 4095-byte packets transmitted on the
benchmark port.

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.1271.2.1.39.1.1.3.1.23

cienaCesBenchmarkEntityStatsEntryPortTx4096To9216Pkts

Number of 4096 to 9216-byte packets transmitted on the
benchmark port.

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.1271.2.1.39.1.1.3.1.24

cienaCesBenchmarkEntityStatsEntryPortRxBytes

Number of bytes received on the benchmark port.

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.1271.2.1.39.1.1.3.1.25

cienaCesBenchmarkEntityStatsEntryPortRxPkts

Number of packets received on the benchmark port.

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.1271.2.1.39.1.1.3.1.26

cienaCesBenchmarkEntityStatsEntryPortRxExDeferPkts

Number of excessive deferred packets.

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.1271.2.1.39.1.1.3.1.27

cienaCesBenchmarkEntityStatsEntryPortRxDeferPkts

Number of deferred packets.

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.1271.2.1.39.1.1.3.1.28

cienaCesBenchmarkEntityStatsEntryPortRxGiantPkts

Number of too big packets.

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.1271.2.1.39.1.1.3.1.29

cienaCesBenchmarkEntityStatsEntryPortRxUnderRunPkts

Underrun packet count for the benchmark port.

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.1271.2.1.39.1.1.3.1.30

cienaCesBenchmarkEntityStatsEntryPortRxCrcErrorPkts

Number of packets received with CRC errors.

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.1271.2.1.39.1.1.3.1.31

cienaCesBenchmarkEntityStatsEntryPortRxLCheckErrorPkts

Number of packets with length check errors.

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.1271.2.1.39.1.1.3.1.32

cienaCesBenchmarkEntityStatsEntryPortRxLOutRangePkts

The number of frames received by the benchmark port
that exceeded the maximum permitted frame size.

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.1271.2.1.39.1.1.3.1.33

cienaCesBenchmarkEntityStatsEntryPortRxPausePkts

The total receive pause packets for the port.

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.1271.2.1.39.1.1.3.1.34

cienaCesBenchmarkEntityStatsEntryPortRxUcastPkts

The total number of unicast packets received by benchmark port.

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.1271.2.1.39.1.1.3.1.35

cienaCesBenchmarkEntityStatsEntryPortRxMcastPkts

The total number of multicast packets received by benchmark port.

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.1271.2.1.39.1.1.3.1.36

cienaCesBenchmarkEntityStatsEntryPortRxBcastPkts

The total number of broadcast packets received by benchmark port.

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.1271.2.1.39.1.1.3.1.37

cienaCesBenchmarkEntityStatsEntryPortRx64OctsPkts

The total number of 64-byte packets received by benchmark port.

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.1271.2.1.39.1.1.3.1.38

cienaCesBenchmarkEntityStatsEntryPortRx65To127Pkts

The total number of 65 to 127-byte packets received by
benchmark port.

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.1271.2.1.39.1.1.3.1.39

cienaCesBenchmarkEntityStatsEntryPortRx128To255Pkts

The total number of 128 to 255-byte packets received by
benchmark port.

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.1271.2.1.39.1.1.3.1.40

cienaCesBenchmarkEntityStatsEntryPortRx256To511Pkts

The total number of 256 to 511-byte packets received by
benchmark port.

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.1271.2.1.39.1.1.3.1.41

cienaCesBenchmarkEntityStatsEntryPortRx512To1023Pkts

The total number of 512 to 1023-byte packets received by
benchmark port.

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.1271.2.1.39.1.1.3.1.42

cienaCesBenchmarkEntityStatsEntryPortRx1024To1518Pkts

The total number of 1024 to 1518-byte packets received by
benchmark port.

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.1271.2.1.39.1.1.3.1.43

cienaCesBenchmarkEntityStatsEntryPortRx1519To2047Pkts

The total number of 1519 to 2047-byte packets received by
benchmark port.

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.1271.2.1.39.1.1.3.1.44

cienaCesBenchmarkEntityStatsEntryPortRx2048To4095Pkts

The total number of 2048 to 4095-byte packets received by
benchmark port.

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.1271.2.1.39.1.1.3.1.45

cienaCesBenchmarkEntityStatsEntryPortRx4096To9216Pkts

The total number of 4096 to 9216-byte packets received by
benchmark port.

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.1271.2.1.39.1.1.3.1.46

cienaCesBenchmarkEntityStatsEntryFpgaMissClassPkts

Test packets received that didn't match any enabled
test session.

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.1271.2.1.39.1.1.3.1.47

cienaCesBenchmarkEntityStatsEntryFpgaCrcErrPkts

Test packets received with CRC errors

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.1271.2.1.39.1.1.3.1.48

cienaCesBenchmarkEntityStatsEntryFpgaUdpChkSumErrPkts

Test packets received with UDP checksum errors

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.1271.2.1.39.1.1.3.1.49

cienaCesBenchmarkEmixSequenceTable

table

.1.3.6.1.4.1.1271.2.1.39.1.1.4 · 1 row entry · 7 columns

Open in standard view

Table providing the list of configured EMIX sequences
on this node.

cienaCesBenchmarkEmixSequenceEntry entry .1.3.6.1.4.1.1271.2.1.39.1.1.4.1

EMIX sequence entry.

Indexes

cienaCesBenchmarkEmixSequenceId

Column Syntax OID

cienaCesBenchmarkEmixSequenceId

Unique Id of the EMIX sequence entry

Integer32

Constraints:
range: 1-32

.1.3.6.1.4.1.1271.2.1.39.1.1.4.1.1

cienaCesBenchmarkEmixSequenceName

Name of this EMIX sequence

OctetStringr/w

Constraints:
range: 1-46

.1.3.6.1.4.1.1271.2.1.39.1.1.4.1.2

cienaCesBenchmarkEmixSequence

EMIX sequence which is a sequence of up to
16 letters from the following set, that can
be repeated, where each letter is associated with
the frame size below it:
a b c d e f g h u v w …

OctetStringr/w

Constraints:
range: 1-16

.1.3.6.1.4.1.1271.2.1.39.1.1.4.1.3

cienaCesBenchmarkEmixSequenceUFrameSize

The frame size associated with the u letter
in the given sequence. The default value is
594.

Integer32r/w

Constraints:
range: 64-9216

.1.3.6.1.4.1.1271.2.1.39.1.1.4.1.4

cienaCesBenchmarkEmixSequenceNumOfRef

Number of generator test profiles currently
using this EMIX sequence for testing.
If this is the default EMIX sequence
set in the generator, that also count
as one reference.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.1271.2.1.39.1.1.4.1.5

cienaCesBenchmarkEmixSequenceUserCreated

Flag indicating whether this sequence was
created by the user or by the system at
initialization. Only user created sequences
are editable.

SNMPv2-TCTruthValue

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.1271.2.1.39.1.1.4.1.6

cienaCesBenchmarkEmixSequenceRowStatus

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.1271.2.1.39.1.1.4.1.7

cienaCesBenchmarkEmixFrameSizeTable

table

.1.3.6.1.4.1.1271.2.1.39.1.1.5 · 1 row entry · 2 columns

Open in standard view

Table providing the list of frame sizes associated
with the specified EMIX sequence Id.

cienaCesBenchmarkEmixFrameSizeEntry entry .1.3.6.1.4.1.1271.2.1.39.1.1.5.1

Frame size associated with given EMIX
sequence ID and frame size index on a given Entity

Indexes

cienaCesBenchmarkEntityEntryId cienaCesBenchmarkEmixSequenceId cienaCesBenchmarkEmixFrameSizeIndex

Column	Syntax	OID
cienaCesBenchmarkEmixFrameSizeIndex Index of frame size in array of frame sizes for the given EMIX sequence.	Integer32 Constraints: `range: 1-16`	`.1.3.6.1.4.1.1271.2.1.39.1.1.5.1.1`
cienaCesBenchmarkEmixFrameSizeEntryFrameSize Frame size associated with the letter at the position given by cienaCesBenchmarkEmixFrameSizeIndex in the EMIX sequence with Id cienaCesBenchmarkEmixSequenceId.	Integer32 Constraints: `range: 64-9216`	`.1.3.6.1.4.1.1271.2.1.39.1.1.5.1.2`

cienaCesBenchmarkEmixAvgFrameSizeTable

table

.1.3.6.1.4.1.1271.2.1.39.1.1.6 · 1 row entry · 1 columns

Open in standard view

Table providing the average frame size associated
with the specified EMIX sequence Id on a given Entity.

cienaCesBenchmarkEmixAvgFrameSizeEntry entry .1.3.6.1.4.1.1271.2.1.39.1.1.6.1

Average frame size associated with given EMIX
sequence ID and Entity. Only valid for Generator
entities.

Indexes

cienaCesBenchmarkEntityEntryId cienaCesBenchmarkEmixSequenceId

Column	Syntax	OID
cienaCesBenchmarkEmixAvgFrameSize Average frame size for the EMIX sequence with Id cienaCesBenchmarkEmixSequenceId on the generator entity with Id cienaCesBenchmarkEntityEntryId.	Integer32 Constraints: `range: 64-9216`	`.1.3.6.1.4.1.1271.2.1.39.1.1.6.1.1`

cienaCesBenchmarkKpiProfileTable

table

.1.3.6.1.4.1.1271.2.1.39.1.1.7 · 1 row entry · 4 columns

Open in standard view

Table providing the list of configured Key Performance
Indicator profiles on this node.

cienaCesBenchmarkKpiProfileEntry entry .1.3.6.1.4.1.1271.2.1.39.1.1.7.1

Hw session allocation entry.

Indexes

cienaCesBenchmarkKpiProfileId

Column Syntax OID

cienaCesBenchmarkKpiProfileId

Unique Id of the KPI profile entry

Integer32

Constraints:
range: 1-32

.1.3.6.1.4.1.1271.2.1.39.1.1.7.1.1

cienaCesBenchmarkKpiProfileName

Name of a the KPI profile

OctetStringr/w

Constraints:
range: 1-46

.1.3.6.1.4.1.1271.2.1.39.1.1.7.1.2

cienaCesBenchmarkKpiProfileNumOfRef

Number of generator test profiles currently
using this KPI profile for results analysis.
If this is the default KPI profile set in
the generator, that also count as one reference.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.1271.2.1.39.1.1.7.1.3

cienaCesBenchmarkKpiProfileRowStatus

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.1271.2.1.39.1.1.7.1.4

cienaCesBenchmarkKpiPcpColorTable

table

.1.3.6.1.4.1.1271.2.1.39.1.1.8 · 1 row entry · 8 columns

Open in standard view

Table providing the list of configured Key Performance
Indicator per KPI profile, per PCP and per Color.

cienaCesBenchmarkKpiPcpColorEntry entry .1.3.6.1.4.1.1271.2.1.39.1.1.8.1

Entry for the KPI values for the given KPI profile,
PCP and color.

Indexes

cienaCesBenchmarkKpiProfileId cienaCesBenchmarkKpiPcpIndex cienaCesBenchmarkKpiColorIndex

Column Syntax OID

cienaCesBenchmarkKpiPcpIndex

Index for the PCP

Integer32

Constraints:
range: 1-8

.1.3.6.1.4.1.1271.2.1.39.1.1.8.1.1

cienaCesBenchmarkKpiColorIndex

Index for the PCP

Integer32

Constraints:
range: 1-2

.1.3.6.1.4.1.1271.2.1.39.1.1.8.1.2

cienaCesBenchmarkKpiPcp

PCP value associated with this entry

Integer32

Constraints:
range: 0-7

.1.3.6.1.4.1.1271.2.1.39.1.1.8.1.3

cienaCesBenchmarkKpiColor

Traffic color, green or yellow, associated with these
KPIs.

CienaCesBenchmarkColorTest

Textual Convention: CienaCesBenchmarkColorTest Enumeration

Type Values:

1	green
2	yellow
3	greenYellow
4	greenYellowRed

.1.3.6.1.4.1.1271.2.1.39.1.1.8.1.4

cienaCesBenchmarkKpiThroughput

Throughput KPI for the given KPI profile, PCP and color
expressed in percent of bandwidth * 10000 to provide a 4
decimal point value.

CienaCesBenchmarkThroughputKpiPercentr/w

Textual Convention: CienaCesBenchmarkThroughputKpiPercent Unsigned32

.1.3.6.1.4.1.1271.2.1.39.1.1.8.1.5

cienaCesBenchmarkKpiFrameloss

Frameloss KPI for the given KPI profile, PCP and color
expressed in percent of bandwidth * 10000 to provide a 4
decimal point value.

CienaCesBenchmarkFramelossKpiPercentr/w

Textual Convention: CienaCesBenchmarkFramelossKpiPercent Unsigned32

.1.3.6.1.4.1.1271.2.1.39.1.1.8.1.6

cienaCesBenchmarkKpiLatency

Maximum latency in micro-seconds that the latency result
should not exceed in order for the test to be considered
a pass.

microsecondsSNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.1271.2.1.39.1.1.8.1.7

cienaCesBenchmarkKpiPdv

Maximum PDV in micro-seconds that the PDV test result
should not exceed in order for the test to be
considered a pass.

microsecondsSNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.1271.2.1.39.1.1.8.1.8

cienaCesBenchmarkBwAllocProfileTable

table

.1.3.6.1.4.1.1271.2.1.39.1.1.9 · 1 row entry · 4 columns

Open in standard view

Table providing the list of configured bandwidth
allocation profiles on this node.

cienaCesBenchmarkBwAllocProfileEntry entry .1.3.6.1.4.1.1271.2.1.39.1.1.9.1

BW allocation profile entry

Indexes

cienaCesBenchmarkBwAllocProfileId

Column Syntax OID

cienaCesBenchmarkBwAllocProfileId

Unique Id of the bandwidth allocation
profile entry

Integer32

Constraints:
range: 1-32

.1.3.6.1.4.1.1271.2.1.39.1.1.9.1.1

cienaCesBenchmarkBwAllocProfileName

Name of a the bandwidth allocation
profile

OctetStringr/w

Constraints:
range: 1-46

.1.3.6.1.4.1.1271.2.1.39.1.1.9.1.2

cienaCesBenchmarkBwAllocProfileNumOfRef

Number of generator test profiles currently
using this bandwidth allocation profile
for testing.
If this is the default BW allocation
profile set in the generator, that also count
as one reference.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.1271.2.1.39.1.1.9.1.3

cienaCesBenchmarkBwAllocProfileRowStatus

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.1271.2.1.39.1.1.9.1.4

cienaCesBenchmarkBwRatioTable

table

.1.3.6.1.4.1.1271.2.1.39.1.1.10 · 1 row entry · 3 columns

Open in standard view

Table providing the list of configured bandwidth
ratio per profile, per PCP.

cienaCesBenchmarkBwRatioEntry entry .1.3.6.1.4.1.1271.2.1.39.1.1.10.1

Entry for bandwidth percent per BW Allocation
profile and PCP

Indexes

cienaCesBenchmarkBwAllocProfileId cienaCesBenchmarkBwRatioPcpIndex

Column	Syntax	OID
cienaCesBenchmarkBwRatioPcpIndex Index for the PCP	Integer32 Constraints: `range: 1-8`	`.1.3.6.1.4.1.1271.2.1.39.1.1.10.1.1`
cienaCesBenchmarkBwRatioPcp PCP value associated with this entry.	Integer32 Constraints: `range: 0-7`	`.1.3.6.1.4.1.1271.2.1.39.1.1.10.1.2`
cienaCesBenchmarkBwRatio Ratio of test bandwidth to allocate to the test session with this PCP value.	Integer32r/w Constraints: `range: 0-1000000`	`.1.3.6.1.4.1.1271.2.1.39.1.1.10.1.3`

cienaCesBenchmarkProfileTable

table

.1.3.6.1.4.1.1271.2.1.39.1.1.11 · 1 row entry · 43 columns

Open in standard view

Table of profile entries.

cienaCesBenchmarkProfileEntry entry .1.3.6.1.4.1.1271.2.1.39.1.1.11.1

BENCHMARK Profile characteristics.

Indexes

cienaCesBenchmarkProfileEntryId

Column Syntax OID

cienaCesBenchmarkProfileEntryId

Index for BENCHMARK profile records.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.1271.2.1.39.1.1.11.1.1

cienaCesBenchmarkProfileEntryName

Name of the profile as entered when created.

OctetStringr/w

Constraints:
range: 1-46

.1.3.6.1.4.1.1271.2.1.39.1.1.11.1.2

cienaCesBenchmarkProfileEntryBandwidth

Maximum bandwidth to use when generating green test
traffic for the profile.

Integer32r/w

Constraints:
range: 1-10000

.1.3.6.1.4.1.1271.2.1.39.1.1.11.1.3

cienaCesBenchmarkProfileEntryExcessBandwidth

Maximum bandwidth to use when generating yellow test
traffic for the profile. When testing for red color,
this bandwidth is multiplied by 1.25

Integer32r/w

Constraints:
range: 0-10000

.1.3.6.1.4.1.1271.2.1.39.1.1.11.1.4

cienaCesBenchmarkProfileEntryInterval

Interval between the start of one test group to the start
of the next test group.

Enumerationr/w

Enumerated Values:

1	t15min
2	t1hr
3	t6hr
4	tCompletion
5	t2hr

.1.3.6.1.4.1.1271.2.1.39.1.1.11.1.5

cienaCesBenchmarkProfileEntryDuration

Duration of the testing. The test group is repeated until
the duration ends. When indefinite is set, test group is
run only once to completion

Enumerationr/w

Enumerated Values:

1	t15min
2	t1hr
3	t6hr
4	t24hr
5	tIndefinite
6	tOnce

.1.3.6.1.4.1.1271.2.1.39.1.1.11.1.6

cienaCesBenchmarkProfileEntrySetFrameSizeList

Used to replace the existing frame size table with the specified list.
More than one values can be listed and are separated by commas.

OctetStringr/w

Constraints:
range: 0-255

.1.3.6.1.4.1.1271.2.1.39.1.1.11.1.7

cienaCesBenchmarkProfileEntryMaxSearches

For the throughput test, this is the maximum number of
searches to find a transmit rate without drops for a
given frame size.

Integer32r/w

Constraints:
range: 1-16

.1.3.6.1.4.1.1271.2.1.39.1.1.11.1.8

cienaCesBenchmarkProfileEntryMaxSamples

For the latency and PDV tests, this is the number of
samples to take in order to determine the min, avg
and max latency and avg PDV.

Integer32r/w

Constraints:
range: 2-20

.1.3.6.1.4.1.1271.2.1.39.1.1.11.1.9

cienaCesBenchmarkProfileEntrySamplingInterval

For the latency and PDV tests, this is the interval,
in 100ms, to wait between samples.

Integer32r/w

Constraints:
range: 1-600

.1.3.6.1.4.1.1271.2.1.39.1.1.11.1.10

cienaCesBenchmarkProfileEntryFrameLossStartBw

For the frame loss test, this indicates which bandwidth
value to use as the starting bandwidth; the maximum
bandwidth determined via the throughput test, the
bandwidth parameter configured in the profile, or
the maximum…

Enumerationr/w

Enumerated Values:

1	profileBandwidth
2	maximumThroughput
3	maximumLineRate

.1.3.6.1.4.1.1271.2.1.39.1.1.11.1.11

cienaCesBenchmarkProfileEntryVidValidation

Indicates whether VID validation is performed in
the classifier or not on the returning packet. If vid
validation is set to false, PCP and Color validation are
ignored and automatically become false.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.1271.2.1.39.1.1.11.1.12

cienaCesBenchmarkProfileEntryPcpValidation

Used to indicate whether the PCP value of the
test packet should be used to classifier the reflected
packets or not. When color remarking is used, this should
be set to false. Default is true.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.1271.2.1.39.1.1.11.1.13

cienaCesBenchmarkProfileEntryColorValidation

Used to indicate whether the color bit of the
test packet should be used to classifier the reflected
packets or not. In color unaware testing, this should
be set to false. Default is true.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.1271.2.1.39.1.1.11.1.14

cienaCesBenchmarkProfileEntryKpiProfileId

Name of a valid KPI profile, from the
cienaCesBenchmarkKpiProfileTable, to use when
analysing the test results for this profile.

Integer32r/w

Constraints:
range: 0-32

.1.3.6.1.4.1.1271.2.1.39.1.1.11.1.15

cienaCesBenchmarkProfileEntryBwAllocProfileId

Id of a valid Bandwidth Allocation profile,
from the cienaCesBenchmarkBwAllocProfileTable,
used for distributing the profile bandwidth amongst
the configured PCP values for this profile when running
tests.

Integer32r/w

Constraints:
range: 0-32

.1.3.6.1.4.1.1271.2.1.39.1.1.11.1.16

cienaCesBenchmarkProfileEntryEmixSequenceId

Id of a valid EMIX sequence configured in the
cienaCesBenchmarkEmixSequenceTable, to use when y1564
is selected. The EMIX sequence is used instead of the
frame size list if and only if y1564 is selected.

Integer32r/w

Constraints:
range: 0-32

.1.3.6.1.4.1.1271.2.1.39.1.1.11.1.17

cienaCesBenchmarkProfileEntryEncapType

Encapsulation type to use for generated packets.

Enumerationr/w

Enumerated Values:

1	untagged
2	dot1q
3	qinq

.1.3.6.1.4.1.1271.2.1.39.1.1.11.1.18

cienaCesBenchmarkProfileEntryPduType

Vlan tag protocol identifier to use for the generated packets.

Enumerationr/w

Enumerated Values:

1	ethernet
2	ip
3	udpecho

.1.3.6.1.4.1.1271.2.1.39.1.1.11.1.19

cienaCesBenchmarkProfileEntryDstmac

MAC address to use as the destination MAC address on
the generated packets.

SNMPv2-TCMacAddressr/w

Textual Convention: SNMPv2-TCMacAddress OctetString

Type Constraints:
range: 6

.1.3.6.1.4.1.1271.2.1.39.1.1.11.1.20

cienaCesBenchmarkProfileEntrySVid

S-VLAN ID to used for generated packets when encapType is set to QinQ

Integer32r/w

Constraints:
range: 0-4094

.1.3.6.1.4.1.1271.2.1.39.1.1.11.1.21

cienaCesBenchmarkProfileEntrySPcp

Bitmap of the S-VLAN PCP (Priority Code Point) value to
test with. When RFC2544 test is enabled, only one
PCP can be set in the mask. Otherwise, a test session
will be run for each PCP bit set. Used when the encapType…

CienaCesBenchmarkPcpBitmapr/w

Textual Convention: CienaCesBenchmarkPcpBitmap Bits

Type Values:

0	pcp0
1	pcp1
2	pcp2
3	pcp3
4	pcp4
5	pcp5
6	pcp6
7	pcp7

.1.3.6.1.4.1.1271.2.1.39.1.1.11.1.22

cienaCesBenchmarkProfileEntrySColor

Color of the S-VLAN tag for the test traffic. This is
directly related to the value of the DEI bit
configured in the VLAN tag of the test traffic. Green
traffic will have its DEI bit set to 0 while Yellow
traffic will…

CienaCesBenchmarkColorTestr/w

Textual Convention: CienaCesBenchmarkColorTest Enumeration

Type Values:

1	green
2	yellow
3	greenYellow
4	greenYellowRed

.1.3.6.1.4.1.1271.2.1.39.1.1.11.1.23

cienaCesBenchmarkProfileEntryCVid

C-VLAN ID to used for generated packets when encapType is set to
QinQ or dot1q.

Integer32r/w

Constraints:
range: 0-4094

.1.3.6.1.4.1.1271.2.1.39.1.1.11.1.24

cienaCesBenchmarkProfileEntryCPcp

Bitmap of the C-VLAN PCP (Priority Code Point) value to
test with. When RFC2544 test is enabled, only one
PCP can be set in the mask. Otherwise, a test session
will be run for each PCP bit set. Only used when the
enca…

CienaCesBenchmarkPcpBitmapr/w

Textual Convention: CienaCesBenchmarkPcpBitmap Bits

Type Values:

0	pcp0
1	pcp1
2	pcp2
3	pcp3
4	pcp4
5	pcp5
6	pcp6
7	pcp7

.1.3.6.1.4.1.1271.2.1.39.1.1.11.1.25

cienaCesBenchmarkProfileEntryCColor

Color of the C-VLAN tag for the test traffic. This is
directly related to the value of the DEI bit
configured in the VLAN tag of the test traffic. Green
traffic will have its DEI bit set to 0 while Yellow
traffic will…

CienaCesBenchmarkColorTestr/w

Textual Convention: CienaCesBenchmarkColorTest Enumeration

Type Values:

1	green
2	yellow
3	greenYellow
4	greenYellowRed

.1.3.6.1.4.1.1271.2.1.39.1.1.11.1.26

cienaCesBenchmarkProfileEntryTpid

Vlan tag protocol identifier to use for the generated packets.
The following TPID values are supported by benchmark:
0x8100
0x9100
0x88A8

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.1271.2.1.39.1.1.11.1.27

cienaCesBenchmarkProfileEntryDscp

IP DSCP value to use for the generated packets.

Integer32r/w

Constraints:
range: 0-63

.1.3.6.1.4.1.1271.2.1.39.1.1.11.1.28

cienaCesBenchmarkProfileEntrySrcInetAddrType

Specifies the type of address cienaCesBenchmarkProfileEntrySrcInetAddr belongs to.
When set to:
ipv4 : cienaCesBenchmarkProfileEntrySrcInetAddr should be compliant with
InetAddressIPv4 from RFC 4001
ipv6 :…

INET-ADDRESS-MIBInetAddressTyper/w

Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration

Type Values:

0	unknown
1	ipv4
2	ipv6
3	ipv4z
4	ipv6z
16	dns
25	l2vpn

.1.3.6.1.4.1.1271.2.1.39.1.1.11.1.29

cienaCesBenchmarkProfileEntrySrcInetAddr

Specifies the unicast source IP address to use in IP test packet.
The InetAddress specified here is compliant with RFC 4001.
The InetAddressType and the InetAddress must be set as part of the same SNMP
SET request.

INET-ADDRESS-MIBInetAddressr/w

Textual Convention: INET-ADDRESS-MIBInetAddress OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.1271.2.1.39.1.1.11.1.30

cienaCesBenchmarkProfileEntryDstInetAddrType

Specifies the type of address cienaCesBenchmarkProfileEntryDstInetAddr belongs to.
When set to:
ipv4 : cienaCesBenchmarkProfileEntryDstInetAddr should be compliant with
InetAddressIPv4 from RFC 4001
ipv6 :…

INET-ADDRESS-MIBInetAddressTyper/w

Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration

Type Values:

0	unknown
1	ipv4
2	ipv6
3	ipv4z
4	ipv6z
16	dns
25	l2vpn

.1.3.6.1.4.1.1271.2.1.39.1.1.11.1.31

cienaCesBenchmarkProfileEntryDstInetAddr

Specifies the unicast destination IP address to use in IP test packet.
The InetAddress specified here is compliant with RFC 4001.
The InetAddressType and the InetAddress must be set as part of the same SNMP
SET request.

INET-ADDRESS-MIBInetAddressr/w

Textual Convention: INET-ADDRESS-MIBInetAddress OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.1271.2.1.39.1.1.11.1.32

cienaCesBenchmarkProfileEntryCustomPayload

Custom payload to be used on the generated packets.

OctetStringr/w

Constraints:
range: 0-256

.1.3.6.1.4.1.1271.2.1.39.1.1.11.1.33

cienaCesBenchmarkProfileEntryThroughputTest

Run throughput test

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.1271.2.1.39.1.1.11.1.34

cienaCesBenchmarkProfileEntryFramelossTest

Run frame loss test

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.1271.2.1.39.1.1.11.1.35

cienaCesBenchmarkProfileEntryLatencyTest

Run latency test

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.1271.2.1.39.1.1.11.1.36

cienaCesBenchmarkProfileEntryPdvTest

Run packet delay variation test

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.1271.2.1.39.1.1.11.1.37

cienaCesBenchmarkProfileEntryBurstTest

Run packet burst test

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.1271.2.1.39.1.1.11.1.38

cienaCesBenchmarkProfileEntryRfc2544Suite

Run RFC2544 test suite which includes throughput, frame
loss and latency tests

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.1271.2.1.39.1.1.11.1.39

cienaCesBenchmarkProfileEntryY1564Test

The Y1564 test includes the throughput, frameloss,
latency and PDV tests are is run using the configured
EMIX sequence. If the profile's EMIX sequence is
not configured, the default generator EMIX sequence is
used. Y156…

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.1271.2.1.39.1.1.11.1.40

cienaCesBenchmarkProfileEntryHwSessionsRequired

This represents the number of hardware sessions
required to enable/run a test instance using
this profile according to the profile's current
configuration.
One hardware session is required for each outer tag
PCP and c…

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.1271.2.1.39.1.1.11.1.41

cienaCesBenchmarkProfileEntryNumOfRef

Number of generator test instances currently
using this test profile for testing.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.1271.2.1.39.1.1.11.1.42

cienaCesBenchmarkProfileEntryRowStatus

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.1271.2.1.39.1.1.11.1.43

cienaCesBenchmarkTestInstanceTable

table

.1.3.6.1.4.1.1271.2.1.39.1.1.12 · 1 row entry · 18 columns

Open in standard view

Table of test instance entries.

cienaCesBenchmarkTestInstanceEntry entry .1.3.6.1.4.1.1271.2.1.39.1.1.12.1

BENCHMARK test instance characteristics.

Indexes

cienaCesBenchmarkTestInstanceEntryId

Column Syntax OID

cienaCesBenchmarkTestInstanceEntryId

Unique identifier for the test instance.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.1271.2.1.39.1.1.12.1.1

cienaCesBenchmarkTestInstanceEntryName

Unique name given to the test instance at creation time.

OctetStringr/w

Constraints:
range: 1-46

.1.3.6.1.4.1.1271.2.1.39.1.1.12.1.2

cienaCesBenchmarkTestInstanceEntrySubPortId

ID of the sub-port to base this test instance on. The sub-port has
to be a child of the port under test associated with an existing
entity.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.1271.2.1.39.1.1.12.1.3

cienaCesBenchmarkTestInstanceEntryProfileId

Id of an existing test profile to be used with the test instance as
the template for testing. A test profile ID has to be specified if
this test instance is associated with a generator entity. If it's a
reflector test i…

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.1271.2.1.39.1.1.12.1.4

cienaCesBenchmarkTestInstanceEntrySvid

S VLAN ID to use for testing.
For generator test instances, this over-writes the value defined in
the referenced test profile if applicable (encap-type set to qinq).
For reflector test instances, this has to be set to …

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.1271.2.1.39.1.1.12.1.5

cienaCesBenchmarkTestInstanceEntryCvid

C VLAN ID to use for testing.
For generator test instances, this over-writes the value defined in the
referenced test profile if applicable (encap-type set to dot1q or qinq).
For reflector test instances, this has to b…

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.1271.2.1.39.1.1.12.1.6

cienaCesBenchmarkTestInstanceEntryUntagged

When set to true, this indicates that the test instance
is to be associated with untagged data traffic. When this
is set, the cvid and svid parameters must be 0.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.1271.2.1.39.1.1.12.1.7

cienaCesBenchmarkTestInstanceEntryDstMac

Destination MAC address to use for generator test instances. When set,
this over writes the value specified in the referenced test profile.
This field is not applicable for reflector test instances.

SNMPv2-TCMacAddressr/w

Textual Convention: SNMPv2-TCMacAddress OctetString

Type Constraints:
range: 6

.1.3.6.1.4.1.1271.2.1.39.1.1.12.1.8

cienaCesBenchmarkTestInstanceEntryAdminState

Indicates the administrative state of the test instance. Upon enabling
a test instance, resources are allocated in hardware. For reflector test
instances, this triggers the start of reflection of any test traffic
receiv…

CienaCesBenchmarkAdminStater/w

Textual Convention: CienaCesBenchmarkAdminState Enumeration

Type Values:

1	disabled
2	enabled

.1.3.6.1.4.1.1271.2.1.39.1.1.12.1.9

cienaCesBenchmarkTestInstanceEntryStarted

Applicable to generator test instances, this indicates whether testing is
in progress or not. Setting this attribute to true will initiate
testing.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.1271.2.1.39.1.1.12.1.10

cienaCesBenchmarkTestInstanceEntryCurrentInterval

Applicable to generator test instances, this indicates the
number of intervals of the selected tests have been run,
including the current one, in relation to the total number of
intervals to complete. This is based on…

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.1271.2.1.39.1.1.12.1.11

cienaCesBenchmarkTestInstanceEntryTotalIntervals

Applicable to generator test instances, this indicates the
total number of intervals of the selected tests to be run
by a single start command on the test instance. This is
based on the profile's interval and duration…

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.1271.2.1.39.1.1.12.1.12

cienaCesBenchmarkTestInstanceEntryLastIterStart

Date and time of the last iteration that started since the
last time the system was rebooted or the statistics were
cleared on the test instance.

SNMPv2-TCDateAndTime

Textual Convention: SNMPv2-TCDateAndTime OctetString

Type Constraints:
range: 8
range: 11

.1.3.6.1.4.1.1271.2.1.39.1.1.12.1.13

cienaCesBenchmarkTestInstanceEntryClearStats

Set to true to clear the results and counters for the
test instance.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.1271.2.1.39.1.1.12.1.14

cienaCesBenchmarkTestInstanceEntryRowStatus

Used to manage the creation and deletion of the conceptual rows in this table.
To create a row in this table, set this object to 'createAndGo'.
To delete a row in this table, set this object to 'destroy'.
If the entry e…

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.1271.2.1.39.1.1.12.1.15

cienaCesBenchmarkTestInstanceEntryAssocEntityId

ID of the entity this test instance is associated with
(cienaCesBenchmarkEntityEntryId)

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.1271.2.1.39.1.1.12.1.16

cienaCesBenchmarkTestInstanceEntryOperState

Indicates the operational state of the test instance. When a generator
test instance is operationally enabled it means the test is running and
traffic is being generated. When a reflector test instance is operationall…

SNMPv2-TCTruthValue

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.1271.2.1.39.1.1.12.1.17

cienaCesBenchmarkTestInstanceEntryConnectivityTest

Applicable to generator test instances, this field is used to trigger
a connectivity test on the test instance. Setting the value to true will
trigger the test by transmitting 10 packets. If no error is returned
then…

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.1271.2.1.39.1.1.12.1.18

cienaCesBenchmarkGenTestSessionAllocationTable

table

.1.3.6.1.4.1.1271.2.1.39.1.1.13 · 1 row entry · 15 columns

Open in standard view

Table providing the allocation of hw test session per 
generator test instance Id, PCP and color.

cienaCesBenchmarkGenTestSessionAllocationEntry entry .1.3.6.1.4.1.1271.2.1.39.1.1.13.1

Test session (aka hardware session) allocation entry.
SPECIAL NOTE: It is important to know that when the associated
test profile's encapsulation type is set to untagged,
the last two elements of the index (PCP and colo…

Indexes

cienaCesBenchmarkEntityEntryId cienaCesBenchmarkTestInstanceEntryId cienaCesBenchmarkGenTestSessionPcpIndex cienaCesBenchmarkGenTestSessionColorIndex

Column Syntax OID

cienaCesBenchmarkGenTestSessionPcpIndex

PCP Index.

Integer32

Constraints:
range: 1-8

.1.3.6.1.4.1.1271.2.1.39.1.1.13.1.1

cienaCesBenchmarkGenTestSessionColorIndex

Color Index.

Integer32

Constraints:
range: 1-2

.1.3.6.1.4.1.1271.2.1.39.1.1.13.1.2

cienaCesBenchmarkGenTestSessionPcp

PCP value associated with this hw session

Integer32

Constraints:
range: 0-7

.1.3.6.1.4.1.1271.2.1.39.1.1.13.1.3

cienaCesBenchmarkGenTestSessionColor

Color of test traffic associated with this hardware
session

CienaCesBenchmarkColorTest

Textual Convention: CienaCesBenchmarkColorTest Enumeration

Type Values:

1	green
2	yellow
3	greenYellow
4	greenYellowRed

.1.3.6.1.4.1.1271.2.1.39.1.1.13.1.4

cienaCesBenchmarkGenTestSessionId

Id of the hardware session allocated to the given
test instance id, pcp and color

Integer32

Constraints:
range: 0-127

.1.3.6.1.4.1.1271.2.1.39.1.1.13.1.5

cienaCesBenchmarkGenTestSessionEmixSequenceId

EMIX sequence Id used with this session. If zero,
it indicates that the the frame size list is being used
for the test and cienaCesBenchmarkGenTestSessionCurrentPktSize
indicates which packet size is currently being te…

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.1271.2.1.39.1.1.13.1.6

cienaCesBenchmarkGenTestSessionCurrentPktSize

Packet size in bytes currently used by the running test.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.1271.2.1.39.1.1.13.1.7

cienaCesBenchmarkGenTestSessionThroughputTestState

State of the throughput test for this hardware session
defined by the test instance id, pcp and color

CienaCesBenchmarkThroughputTestState

Textual Convention: CienaCesBenchmarkThroughputTestState Enumeration

Type Values:

1	idle
2	running
3	waitingForResidualPackets
4	processingResults
5	stoppedByIntervalTimer
6	stoppedByDurationTimer
7	stoppedByUser
8	done
9	txMaxThroughputForYellowTest

.1.3.6.1.4.1.1271.2.1.39.1.1.13.1.8

cienaCesBenchmarkGenTestSessionFramelossTestState

State of the frameloss test for this hardware session
defined by the test instance id, pcp and color

CienaCesBenchmarkFramelossTestState

Textual Convention: CienaCesBenchmarkFramelossTestState Enumeration

Type Values:

1	idle
2	runningFirstTest
3	waitingForResidualFirstPackets
4	processingFirstResults
5	runningSecondTest
6	waitingForResidualSecondPackets
7	processingSecondResults
8	stoppedByIntervalTimer
9	stoppedByDurationTimer
10	stoppedByUser
11	done

.1.3.6.1.4.1.1271.2.1.39.1.1.13.1.9

cienaCesBenchmarkGenTestSessionLatencyTestState

State of the latency test for this hardware session
defined by the test instance id, pcp and color

CienaCesBenchmarkLatencyPdvTestState

Textual Convention: CienaCesBenchmarkLatencyPdvTestState Enumeration

Type Values:

1	idle
2	sendingTraffic
3	waitingForTimestampData
4	waitingForResidualPackets
5	processingResults
6	stoppedByIntervalTimer
7	stoppedByDurationTimer
8	stoppedByUser
9	done

.1.3.6.1.4.1.1271.2.1.39.1.1.13.1.10

cienaCesBenchmarkGenTestSessionPdvTestState

State of the PDV test for this hardware session
defined by the test instance id, pcp and color

CienaCesBenchmarkLatencyPdvTestState

Textual Convention: CienaCesBenchmarkLatencyPdvTestState Enumeration

Type Values:

1	idle
2	sendingTraffic
3	waitingForTimestampData
4	waitingForResidualPackets
5	processingResults
6	stoppedByIntervalTimer
7	stoppedByDurationTimer
8	stoppedByUser
9	done

.1.3.6.1.4.1.1271.2.1.39.1.1.13.1.11

cienaCesBenchmarkGenTestSessionRfc2544TestState

State of the RFC2544 test for this hardware session
defined by the test instance id, pcp and color

CienaCesBenchmarkRfc2544TestState

Textual Convention: CienaCesBenchmarkRfc2544TestState Enumeration

Type Values:

1	idle
2	running
3	stoppedByIntervalTimer
4	stoppedByDurationTimer
5	stoppedByUser
6	done

.1.3.6.1.4.1.1271.2.1.39.1.1.13.1.12

cienaCesBenchmarkGenTestSessionY1564TestState

State of the Y1564 test for this hardware session
defined by the test instance id, pcp and color

CienaCesBenchmarkY1564TestState

Textual Convention: CienaCesBenchmarkY1564TestState Enumeration

Type Values:

1	idle
2	running
3	stoppedByIntervalTimer
4	stoppedByDurationTimer
5	stoppedByUser
6	done

.1.3.6.1.4.1.1271.2.1.39.1.1.13.1.13

cienaCesBenchmarkGenTestSessionCurrentRate

Traffic rate currently used to generate packets as percent
of the line rate

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.1271.2.1.39.1.1.13.1.14

cienaCesBenchmarkGenTestSessionSamplesCompleted

When latency and/or pdv is running, this indicates how
many samples have been gathered so far.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.1271.2.1.39.1.1.13.1.15

cienaCesBenchmarkTestInstanceStatsTable

table

.1.3.6.1.4.1.1271.2.1.39.1.1.14 · 1 row entry · 15 columns

Open in standard view

Table of test instance packet statistics entries.

cienaCesBenchmarkTestInstanceStatsEntry entry .1.3.6.1.4.1.1271.2.1.39.1.1.14.1

Benchmark test instance packet statistics

Indexes

cienaCesBenchmarkEntityEntryId cienaCesBenchmarkTestInstanceEntryId

Column Syntax OID

cienaCesBenchmarkTestInstanceStatsRxPkts

Total number of received packets for
this test instance.

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.1271.2.1.39.1.1.14.1.1

cienaCesBenchmarkTestInstanceStatsRxIpv4Pkts

Total number of IPv4 packets received for
this test instance.

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.1271.2.1.39.1.1.14.1.2

cienaCesBenchmarkTestInstanceStatsRxIpv4UdpPkts

Total number of IPv4 UDP packets received for
this test instance.

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.1271.2.1.39.1.1.14.1.3

cienaCesBenchmarkTestInstanceStatsRxIpv6Pkts

Total number of IPv6 packets received for
this test instance.

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.1271.2.1.39.1.1.14.1.4

cienaCesBenchmarkTestInstanceStatsRxIpv6UdpPkts

Total number of IPv6 UDP packets received for
this test instance.

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.1271.2.1.39.1.1.14.1.5

cienaCesBenchmarkTestInstanceStatsRxNonIpPkts

Total number of non-IP packets received for
this test instance.

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.1271.2.1.39.1.1.14.1.6

cienaCesBenchmarkTestInstanceStatsRxUnrecognizedPkts

Total number of unrecognized packets received for
this test instance.

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.1271.2.1.39.1.1.14.1.7

cienaCesBenchmarkTestInstanceStatsRxDuplicatePkts

Total number of packets received with a duplicate
this test instance.

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.1271.2.1.39.1.1.14.1.8

cienaCesBenchmarkTestInstanceStatsRxDuplicatePktsOverflow

When set to true, this indicates that the duplicate
pkt counter has rolled over in hardware and therefore,
cienaCesBenchmarkTestInstanceStatsRxDuplicatePkts might
not be accurate.

SNMPv2-TCTruthValue

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.1271.2.1.39.1.1.14.1.9

cienaCesBenchmarkTestInstanceStatsRxOOOPkts

Total number of packets received with an out of
order sequence number. The sequence number was less
than the expected sequence number for this test instance.

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.1271.2.1.39.1.1.14.1.10

cienaCesBenchmarkTestInstanceStatsRxOOOPktsOverflow

When set to true, this indicates that the out of order
pkt counter has rolled over in hardware and therefore,
cienaCesBenchmarkTestInstanceStatsRxOOOPkts might
not be accurate.

SNMPv2-TCTruthValue

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.1271.2.1.39.1.1.14.1.11

cienaCesBenchmarkTestInstanceStatsRxDiscSeqNumPkts

Total number of packets received with a sequence number
greater then the expected sequence number for this test instance.

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.1271.2.1.39.1.1.14.1.12

cienaCesBenchmarkTestInstanceStatsRxDiscSeqNumPktsOverflow

When set to true, this indicates that the discontinuity
in sequence number pkt counter has rolled over in hardware
and therefore, cienaCesBenchmarkTestInstanceStatsRxDiscSeqNumPkts
might not be accurate.

SNMPv2-TCTruthValue

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.1271.2.1.39.1.1.14.1.13

cienaCesBenchmarkTestInstanceStatsRxUdpCheckSumPkts

Total number of UDP packets received with a UDP checksum
error.

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.1271.2.1.39.1.1.14.1.14

cienaCesBenchmarkTestInstanceStatsTxPkts

Total number of packets transmitted for this test instance.

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.1271.2.1.39.1.1.14.1.15

cienaCesBenchmarkGenTestSessionThroughputResultsTable

table

.1.3.6.1.4.1.1271.2.1.39.1.1.15 · 1 row entry · 12 columns

Open in standard view

Table of BENCHMARK generator test session throughput results in Mbps.

cienaCesBenchmarkGenTestSessionThroughputResultsEntry entry .1.3.6.1.4.1.1271.2.1.39.1.1.15.1

BENCHMARK generator test session throughput results.

Indexes

cienaCesBenchmarkEntityEntryId cienaCesBenchmarkTestInstanceEntryId cienaCesBenchmarkGenTestSessionThroughputResultsPcpIndex cienaCesBenchmarkGenTestSessionThroughputResultsColorIndex cienaCesBenchmarkGenTestSessionThroughputResultsFrameSizeIndex

Column Syntax OID

cienaCesBenchmarkGenTestSessionThroughputResultsPcpIndex

Index of the PCP value

Integer32

Constraints:
range: 1-8

.1.3.6.1.4.1.1271.2.1.39.1.1.15.1.1

cienaCesBenchmarkGenTestSessionThroughputResultsColorIndex

Color index.

Integer32

Constraints:
range: 1-2

.1.3.6.1.4.1.1271.2.1.39.1.1.15.1.2

cienaCesBenchmarkGenTestSessionThroughputResultsFrameSizeIndex

Frame size index for which those throughput results are
for. When EMIX is used, in which case
cienaCesBenchmarkGenTestSessionThroughputResultsEmixSequenceId is
not NULL, there is only one frame size index for
the given…

Integer32

Constraints:
range: 1-10

.1.3.6.1.4.1.1271.2.1.39.1.1.15.1.3

cienaCesBenchmarkGenTestSessionThroughputResultsPcp

PCP value of the test packets associated with those
results.

Integer32

Constraints:
range: 0-7

.1.3.6.1.4.1.1271.2.1.39.1.1.15.1.4

cienaCesBenchmarkGenTestSessionThroughputResultsColor

Color of the test packets associated with those
results.

CienaCesBenchmarkColorTest

Textual Convention: CienaCesBenchmarkColorTest Enumeration

Type Values:

1	green
2	yellow
3	greenYellow
4	greenYellowRed

.1.3.6.1.4.1.1271.2.1.39.1.1.15.1.5

cienaCesBenchmarkGenTestSessionThroughputResultsFrameSize

Packet size in bytes. If 0, then the
cienaCesBenchmarkGenTestSessionThroughputResultsEmixSequenceId
indicates the ID of the EMIX sequence used for the test

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.1271.2.1.39.1.1.15.1.6

cienaCesBenchmarkGenTestSessionThroughputResultsEmixSequenceId

ID of the EMIX sequence that was used for running the
test which produced these results. When 0,
frame size indicates the size of the test frame
associated with these results.

Integer32

Constraints:
range: 1-32

.1.3.6.1.4.1.1271.2.1.39.1.1.15.1.7

cienaCesBenchmarkGenTestSessionThroughputResultsMin

Minimum throughput recorded for the given packet size
in Mbps * 100. The value is multiplied by 100 to be able
to send the results as an integer but should be divided
by 100 when displayed to provide a 2 decimal point …

CienaCesBenchmarkThroughputResult

Textual Convention: CienaCesBenchmarkThroughputResult Unsigned32

.1.3.6.1.4.1.1271.2.1.39.1.1.15.1.8

cienaCesBenchmarkGenTestSessionThroughputResultsMax

Maximum throughput recorded for the given packet size
in Mbps * 100. The value is multiplied by 100 to be able
to send the results as an integer but should be divided
by 100 when displayed to provide a 2 decimal point a…

CienaCesBenchmarkThroughputResult

Textual Convention: CienaCesBenchmarkThroughputResult Unsigned32

.1.3.6.1.4.1.1271.2.1.39.1.1.15.1.9

cienaCesBenchmarkGenTestSessionThroughputResultsAvg

Average throughput recorded for the given packet size
in Mbps * 100. The value is multiplied by 100 to be able
to send the results as an integer but should be divided
by 100 when displayed to provide a 2 decimal point a…

CienaCesBenchmarkThroughputResult

Textual Convention: CienaCesBenchmarkThroughputResult Unsigned32

.1.3.6.1.4.1.1271.2.1.39.1.1.15.1.10

cienaCesBenchmarkGenTestSessionThroughputResultsIterations

Number of times the test has been run for this packet size.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.1271.2.1.39.1.1.15.1.11

cienaCesBenchmarkGenTestSessionThroughputResultsKpiResult

Pass or fail results for the test which is determined
by comparing the max throughput against the selected
KPI test instance's throughput pass criteria. If no KPI test instance
is selected for the given test instance I…

CienaCesBenchmarkKpiResult

Textual Convention: CienaCesBenchmarkKpiResult Enumeration

Type Values:

1	notAvailable
2	pass
3	fail

.1.3.6.1.4.1.1271.2.1.39.1.1.15.1.12

cienaCesBenchmarkGenTestSessionFramelossResultsTable

table

.1.3.6.1.4.1.1271.2.1.39.1.1.16 · 1 row entry · 13 columns

Open in standard view

Table of BENCHMARK generator test session frameloss results.

cienaCesBenchmarkGenTestSessionFramelossResultsEntry entry .1.3.6.1.4.1.1271.2.1.39.1.1.16.1

BENCHMARK generator test session frameloss results.

Indexes

cienaCesBenchmarkEntityEntryId cienaCesBenchmarkTestInstanceEntryId cienaCesBenchmarkGenTestSessionFramelossResultsPcpIndex cienaCesBenchmarkGenTestSessionFramelossResultsColorIndex cienaCesBenchmarkGenTestSessionFramelossResultsFrameSizeIndex cienaCesBenchmarkGenTestSessionFramelossResultsRateIndex

Column Syntax OID

cienaCesBenchmarkGenTestSessionFramelossResultsPcpIndex

PCP index.

Integer32

Constraints:
range: 1-8

.1.3.6.1.4.1.1271.2.1.39.1.1.16.1.1

cienaCesBenchmarkGenTestSessionFramelossResultsColorIndex

Color index.

Integer32

Constraints:
range: 1-2

.1.3.6.1.4.1.1271.2.1.39.1.1.16.1.2

cienaCesBenchmarkGenTestSessionFramelossResultsFrameSizeIndex

Frame size index.

Integer32

Constraints:
range: 1-10

.1.3.6.1.4.1.1271.2.1.39.1.1.16.1.3

cienaCesBenchmarkGenTestSessionFramelossResultsRateIndex

Rate index.

Integer32

Constraints:
range: 1-10

.1.3.6.1.4.1.1271.2.1.39.1.1.16.1.4

cienaCesBenchmarkGenTestSessionFramelossResultsPcp

PCP value of the test packets associated with those
results.

Integer32

Constraints:
range: 0-7

.1.3.6.1.4.1.1271.2.1.39.1.1.16.1.5

cienaCesBenchmarkGenTestSessionFramelossResultsColor

Color of the test packets associated with those
results.

CienaCesBenchmarkColorTest

Textual Convention: CienaCesBenchmarkColorTest Enumeration

Type Values:

1	green
2	yellow
3	greenYellow
4	greenYellowRed

.1.3.6.1.4.1.1271.2.1.39.1.1.16.1.6

cienaCesBenchmarkGenTestSessionFramelossResultsFrameSize

Packet size in bytes. If 0, then the
cienaCesBenchmarkGenTestSessionFramelossResultsEmixSequenceId
indicates the ID of the EMIX sequence used for the test

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.1271.2.1.39.1.1.16.1.7

cienaCesBenchmarkGenTestSessionFramelossResultsEmixSequenceId

ID of the EMIX sequence that was used for running the
test which produced these results. When 0,
frame size indicates the size of the test frame
associated with these results.

Integer32

Constraints:
range: 1-32

.1.3.6.1.4.1.1271.2.1.39.1.1.16.1.8

cienaCesBenchmarkGenTestSessionFramelossResultsRate

Rate in percent of line rate.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.1271.2.1.39.1.1.16.1.9

cienaCesBenchmarkGenTestSessionFramelossResultsFirst

Percentage of frames lost on first test sequence.

CienaCesBenchmarkFramelossResult

Textual Convention: CienaCesBenchmarkFramelossResult Unsigned32

.1.3.6.1.4.1.1271.2.1.39.1.1.16.1.10

cienaCesBenchmarkGenTestSessionFramelossResultsSecond

Percentage of frames lost on second test sequence.

CienaCesBenchmarkFramelossResult

Textual Convention: CienaCesBenchmarkFramelossResult Unsigned32

.1.3.6.1.4.1.1271.2.1.39.1.1.16.1.11

cienaCesBenchmarkGenTestSessionFramelossResultsKpiResult

Pass or fail results for the test which is determined
by comparing the frameloss result against the selected
KPI test instance's frameloss pass criteria. If no KPI test instance
is selected for the given test instance …

CienaCesBenchmarkKpiResult

Textual Convention: CienaCesBenchmarkKpiResult Enumeration

Type Values:

1	notAvailable
2	pass
3	fail

.1.3.6.1.4.1.1271.2.1.39.1.1.16.1.12

cienaCesBenchmarkGenTestSessionFramelossResultsResult

Percentage of frames lost on the largest test sequence results.

CienaCesBenchmarkFramelossResult

Textual Convention: CienaCesBenchmarkFramelossResult Unsigned32

.1.3.6.1.4.1.1271.2.1.39.1.1.16.1.13

cienaCesBenchmarkGenTestSessionLatencyResultsTable

table

.1.3.6.1.4.1.1271.2.1.39.1.1.17 · 1 row entry · 12 columns

Open in standard view

Table of BENCHMARK generator test session latency results in usec.

cienaCesBenchmarkGenTestSessionLatencyResultsEntry entry .1.3.6.1.4.1.1271.2.1.39.1.1.17.1

BENCHMARK generator test session latency results.

Indexes

cienaCesBenchmarkEntityEntryId cienaCesBenchmarkTestInstanceEntryId cienaCesBenchmarkGenTestSessionLatencyResultsPcpIndex cienaCesBenchmarkGenTestSessionLatencyResultsColorIndex cienaCesBenchmarkGenTestSessionLatencyResultsFrameSizeIndex

Column Syntax OID

cienaCesBenchmarkGenTestSessionLatencyResultsPcpIndex

PCP index.

Integer32

Constraints:
range: 1-8

.1.3.6.1.4.1.1271.2.1.39.1.1.17.1.1

cienaCesBenchmarkGenTestSessionLatencyResultsColorIndex

Color index.

Integer32

Constraints:
range: 1-2

.1.3.6.1.4.1.1271.2.1.39.1.1.17.1.2

cienaCesBenchmarkGenTestSessionLatencyResultsFrameSizeIndex

Frame size index.

Integer32

Constraints:
range: 1-10

.1.3.6.1.4.1.1271.2.1.39.1.1.17.1.3

cienaCesBenchmarkGenTestSessionLatencyResultsPcp

PCP value of the test packets associated with those
results.

Integer32

Constraints:
range: 0-7

.1.3.6.1.4.1.1271.2.1.39.1.1.17.1.4

cienaCesBenchmarkGenTestSessionLatencyResultsColor

Color of the test packets associated with those
results.

CienaCesBenchmarkColorTest

Textual Convention: CienaCesBenchmarkColorTest Enumeration

Type Values:

1	green
2	yellow
3	greenYellow
4	greenYellowRed

.1.3.6.1.4.1.1271.2.1.39.1.1.17.1.5

cienaCesBenchmarkGenTestSessionLatencyResultsFrameSize

Packet size in bytes.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.1271.2.1.39.1.1.17.1.6

cienaCesBenchmarkGenTestSessionLatencyResultsEmixSequenceId

ID of the EMIX sequence that was used for running the
test which produced these results. When 0,
frame size indicates the size of the test frame
associated with these results.

Integer32

Constraints:
range: 1-32

.1.3.6.1.4.1.1271.2.1.39.1.1.17.1.7

cienaCesBenchmarkGenTestSessionLatencyResultsMin

Minimum latency recorded for the given packet size.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.1271.2.1.39.1.1.17.1.8

cienaCesBenchmarkGenTestSessionLatencyResultsMax

Maximum latency recorded for the given packet size.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.1271.2.1.39.1.1.17.1.9

cienaCesBenchmarkGenTestSessionLatencyResultsAvg

Average latency recorded for the given packet size.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.1271.2.1.39.1.1.17.1.10

cienaCesBenchmarkGenTestSessionLatencyResultsSamples

Number of samples taken during the test.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.1271.2.1.39.1.1.17.1.11

cienaCesBenchmarkGenTestSessionLatencyResultsKpiResult

Pass or fail results for the test which is determined
by comparing the frameloss result against the selected
KPI test instance's latency pass criteria. If no KPI test instance
is selected for the given test instance Id…

CienaCesBenchmarkKpiResult

Textual Convention: CienaCesBenchmarkKpiResult Enumeration

Type Values:

1	notAvailable
2	pass
3	fail

.1.3.6.1.4.1.1271.2.1.39.1.1.17.1.12

cienaCesBenchmarkGenTestSessionPdvResultsTable

table

.1.3.6.1.4.1.1271.2.1.39.1.1.18 · 1 row entry · 10 columns

Open in standard view

Table of BENCHMARK generator test session packet delay 
variation results in usec.

cienaCesBenchmarkGenTestSessionPdvResultsEntry entry .1.3.6.1.4.1.1271.2.1.39.1.1.18.1

BENCHMARK generator test session packet delay variation results.

Indexes

cienaCesBenchmarkEntityEntryId cienaCesBenchmarkTestInstanceEntryId cienaCesBenchmarkGenTestSessionPdvResultsPcpIndex cienaCesBenchmarkGenTestSessionPdvResultsColorIndex cienaCesBenchmarkGenTestSessionPdvResultsFrameSizeIndex

Column Syntax OID

cienaCesBenchmarkGenTestSessionPdvResultsPcpIndex

PCP index.

Integer32

Constraints:
range: 1-8

.1.3.6.1.4.1.1271.2.1.39.1.1.18.1.1

cienaCesBenchmarkGenTestSessionPdvResultsColorIndex

Color index.

Integer32

Constraints:
range: 1-2

.1.3.6.1.4.1.1271.2.1.39.1.1.18.1.2

cienaCesBenchmarkGenTestSessionPdvResultsFrameSizeIndex

Frame size index associated to those PDV stats.

Integer32

Constraints:
range: 1-10

.1.3.6.1.4.1.1271.2.1.39.1.1.18.1.3

cienaCesBenchmarkGenTestSessionPdvResultsPcp

PCP value of the test packets associated with those
results.

Integer32

Constraints:
range: 0-7

.1.3.6.1.4.1.1271.2.1.39.1.1.18.1.4

cienaCesBenchmarkGenTestSessionPdvResultsColor

Color of the test packets associated with those
results.

CienaCesBenchmarkColorTest

Textual Convention: CienaCesBenchmarkColorTest Enumeration

Type Values:

1	green
2	yellow
3	greenYellow
4	greenYellowRed

.1.3.6.1.4.1.1271.2.1.39.1.1.18.1.5

cienaCesBenchmarkGenTestSessionPdvResultsFrameSize

Packet size in bytes.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.1271.2.1.39.1.1.18.1.6

cienaCesBenchmarkGenTestSessionPdvResultsEmixSequenceId

ID of the EMIX sequence that was used for running the
test which produced these results. When 0,
frame size indicates the size of the test frame
associated with these results.

Integer32

Constraints:
range: 1-32

.1.3.6.1.4.1.1271.2.1.39.1.1.18.1.7

cienaCesBenchmarkGenTestSessionPdvResultsAvg

Average PDV recorded for the given packet size.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.1271.2.1.39.1.1.18.1.8

cienaCesBenchmarkGenTestSessionPdvResultsSamples

Number of samples used for the test.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.1271.2.1.39.1.1.18.1.9

cienaCesBenchmarkGenTestSessionPdvResultsKpiResult

Pass or fail results for the test which is determined
by comparing the frameloss result against the selected
KPI test instance's throughput PDV criteria. If no KPI test instance
is selected for the given test instance …

CienaCesBenchmarkKpiResult

Textual Convention: CienaCesBenchmarkKpiResult Enumeration

Type Values:

1	notAvailable
2	pass
3	fail

.1.3.6.1.4.1.1271.2.1.39.1.1.18.1.10

cienaCesBenchmarkEmixCharacterSetTable

table

.1.3.6.1.4.1.1271.2.1.39.1.1.19 · 1 row entry · 3 columns

Open in standard view

Table of BENCHMARK EMIX character set providing the
list of characters that can be used in an EMIX sequence
along with their corresponding frame size.

cienaCesBenchmarkEmixCharacterSetEntry entry .1.3.6.1.4.1.1271.2.1.39.1.1.19.1

BENCHMARK EMIX character and its associated frame size.

Indexes

cienaCesBenchmarkEmixCharacterSetEntryIndex

Column	Syntax	OID
cienaCesBenchmarkEmixCharacterSetEntryIndex Character index.	Integer32 Constraints: `range: 1-26`	`.1.3.6.1.4.1.1271.2.1.39.1.1.19.1.1`
cienaCesBenchmarkEmixCharacterSetEntryCharacter EMIX character that can be used for creating an EMIX sequence. The character set currently includes: a b c d e f g h u v w x	OctetString Constraints: `range: 1-1`	`.1.3.6.1.4.1.1271.2.1.39.1.1.19.1.2`
cienaCesBenchmarkEmixCharacterSetEntryFrameSize Frame size associated with the character. For h, the frame size is the port under test's MTU and the u character is a custom frame size configurable for each EMIX. The u frame size can take a value of 64 to 10000 and d…	OctetString Constraints: `range: 1-6`	`.1.3.6.1.4.1.1271.2.1.39.1.1.19.1.3`