CENTILLION-ROOT-MIB Table View

Table-centric layout grouping table, row, and column objects.

Tables
1
Rows
1
Columns
22

slotConfigTable

table mandatory
.1.3.6.1.4.1.930.2.1.1.9 · 1 row entry · 22 columns
The chassis slot configuration table.
slotConfigEntry entry .1.3.6.1.4.1.930.2.1.1.9.1
What type of module is in each slot of the chassis.
Indexes
slotNumber
Column Syntax OID
slotNumber mandatory
The chassis slot number. Valid entries are system dependent
based on the chassis type.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.930.2.1.1.9.1.1
slotModuleType obsolete
Module type.
SsModuleType
Textual Convention: SsModuleType Enumeration
Type Values:
1empty
2other
3mTR4PC
4mTRMCP4PC
5mATM
6mTRFiber
7mTRMCPFiber
8mEther16PC10BT
9mEtherMCP8PC10BT
10mATM2PSMFiber
11mATM2PCopper
12mATM4PMMFiber
13mATM4PSMFiber
14mATM4PCopper
15mATMMCP2PSMFiber
16mATMMCP2PMMFiber
17mATMMCP2PCopper
18mATMMCP4PSMFiber
19mATMMCP4PMMFiber
20mATMMCP4PCopper
21mATM2PC
22mATM4PC
23mATMMCP2PC
24mATMMCP4PC
25mEther16P10BT100BTCopper
26mEther14P10BT100BF
27mEther8P10BF
28mEther10P10BT100BT
29mEther16P10BT100BTMixed
30mEther10P10BT100BTMIX
32mEther12PBFL
33mEther16P4x4
34mTRMCP8PC
35mTR8PC
36mEther24PC
37mEther24P10BT100BT
38mEther24P100BFx
39mTR8PFiber
40mATM4PMDA
41mATMMCP4PMDA
42mEther4P100BT
43mTR24PC
44mTR16PC
45mATMMCP1PSMFiber
46mATMMCP1PMMFiber
47mATM1PMMFiber
48mATM1PVNR
49mEther24P10BT100BTx
.1.3.6.1.4.1.930.2.1.1.9.1.2
slotModuleHwVer mandatory
The hardware revision of the module.
OctetString
Constraints:
range: 6-6
.1.3.6.1.4.1.930.2.1.1.9.1.3
slotModuleSerialNumber mandatory
Module serial number. Format is 3 BCD digits.
OctetString
Constraints:
range: 3-3
.1.3.6.1.4.1.930.2.1.1.9.1.4
slotModuleSwVer mandatory
The software revision of the module.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
.1.3.6.1.4.1.930.2.1.1.9.1.5
slotModuleStatus mandatory
This indicates the operational status of the module.
Enumeration
Enumerated Values:
1ok
2fail
.1.3.6.1.4.1.930.2.1.1.9.1.6
slotModuleLeds mandatory
Status of the module LEDs. Each LED bank is encoded
in four bits (nibble), one bit for each LED. The least
significant bit of each nibble represents the bottom LED
of each bank. The first octet in the string, as read f…
OctetString .1.3.6.1.4.1.930.2.1.1.9.1.7
slotModuleReset mandatory
This indicates the reset state of the module. Writing with
the value reset (2) will reset the module.
Enumerationr/w
Enumerated Values:
1noReset
2reset
.1.3.6.1.4.1.930.2.1.1.9.1.8
slotConfigDelete mandatory
Setting this object causes the configuration of the
slot to be deleted. When read, this object has a value
of false(2).
Booleanr/w
Textual Convention: Boolean Enumeration
Type Values:
1true
2false
.1.3.6.1.4.1.930.2.1.1.9.1.9
slotConfigMediaType mandatory
The configured card media type. In the case of a card
mismatch, the configured media type and the module type
will not match.
SsMediaType
Textual Convention: SsMediaType Enumeration
Type Values:
1mediaUnkown
2mediaTokenRing
3mediaFDDI
4mediaEthernet
5mediaATM
.1.3.6.1.4.1.930.2.1.1.9.1.10
slotModuleMaxRAM mandatory
This indicates maximum RAM size in KB can be installed in
this module.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.930.2.1.1.9.1.11
slotModuleInstalledRAM mandatory
This indicates installed RAM in KB of this module.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.930.2.1.1.9.1.12
slotModuleFlashSize mandatory
This indicates installed flash size in KB of this module.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.930.2.1.1.9.1.13
slotModuleProductImageId mandatory
This indicates the product target image id of this module.
Enumeration
Enumerated Values:
1notApplicable
2noAtmLanEmulation
3minAtmLanEmulation
4fullAtmLanEmulation
5pnnifullAtmLanEmulation
.1.3.6.1.4.1.930.2.1.1.9.1.14
slotModuleBaseMacAddress mandatory
This object returns the module base Mac address. A physical
port's default Mac address can be computed based on this address
by using following computation:

Port(n)MacAddress = Moudle base Mac address + P…
MacAddress
Textual Convention: MacAddress OctetString
Type Constraints:
range: 6
.1.3.6.1.4.1.930.2.1.1.9.1.15
slotLastResetEPC mandatory
The programe counter realated to the last reset.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.930.2.1.1.9.1.16
slotLastResetVirtualAddress mandatory
The bus address.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.930.2.1.1.9.1.17
slotLastResetCause mandatory
Register value related to the last reset
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.930.2.1.1.9.1.18
slotLastResetTimeStamp mandatory
A integer value of the system clock since last reset.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.930.2.1.1.9.1.19
slotConfigAdd mandatory
Setting this object causes the configuration of the
slot to be updated to match the module currently in
the slot. When read, this object always returns
false(2).
Booleanr/w
Textual Convention: Boolean Enumeration
Type Values:
1true
2false
.1.3.6.1.4.1.930.2.1.1.9.1.20
slotConfigExtClockSource mandatory
This field indicates the external clock source.
0 = Local Oscillator, 1..N = ATM port id for
external clock source. This object only applies
to ATM MDA modules with SM, MM, or UTP media types.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.930.2.1.1.9.1.21
slotConfigTrafficShapingRate mandatory
Configured traffic shaping rate in kilo bits per second
on an ATM module. The actual rate may be different
from the configured rate depending upon the physical
interface of ports in the module.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.930.2.1.1.9.1.22