slotModuleType

CENTILLION-ROOT-MIB · .1.3.6.1.4.1.930.2.1.1.9.1.2
MIB view Table view

Object

column obsolete SsModuleType 
Module type.

Context

MIB
CENTILLION-ROOT-MIB
OID
.1.3.6.1.4.1.930.2.1.1.9.1.2
Type
column
Access
readonly
Status
obsolete
Parent
slotConfigEntry
Table
slotConfigTable
Siblings
21

Syntax

SsModuleType
Source
SsModuleType
Base type
Enumeration

Values & Constraints

Type Values
1empty
2other
3mTR4PC
4mTRMCP4PC
5mATM
6mTRFiber
7mTRMCPFiber
8mEther16PC10BT
9mEtherMCP8PC10BT
10mATM2PSMFiber
11mATM2PCopper
12mATM4PMMFiber
13mATM4PSMFiber
14mATM4PCopper
15mATMMCP2PSMFiber
16mATMMCP2PMMFiber
17mATMMCP2PCopper
18mATMMCP4PSMFiber
19mATMMCP4PMMFiber
20mATMMCP4PCopper
21mATM2PC
22mATM4PC
23mATMMCP2PC
24mATMMCP4PC
25mEther16P10BT100BTCopper
26mEther14P10BT100BF
27mEther8P10BF
28mEther10P10BT100BT
29mEther16P10BT100BTMixed
30mEther10P10BT100BTMIX
32mEther12PBFL
33mEther16P4x4
34mTRMCP8PC
35mTR8PC
36mEther24PC
37mEther24P10BT100BT
38mEther24P100BFx
39mTR8PFiber
40mATM4PMDA
41mATMMCP4PMDA
42mEther4P100BT
43mTR24PC
44mTR16PC
45mATMMCP1PSMFiber
46mATMMCP1PMMFiber
47mATM1PMMFiber
48mATM1PVNR
49mEther24P10BT100BTx

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
slotNumber mandatory
The chassis slot number. Valid entries are system dependent based on the chassis type.
columnInteger32.1.3.6.1.4.1.930.2.1.1.9.1.1
slotConfigMediaType mandatory
The configured card media type. In the case of a card mismatch, the configured media type and the module type will not match.
columnSsMediaType.1.3.6.1.4.1.930.2.1.1.9.1.10
slotModuleMaxRAM mandatory
This indicates maximum RAM size in KB can be installed in this module.
columnInteger32.1.3.6.1.4.1.930.2.1.1.9.1.11
slotModuleInstalledRAM mandatory
This indicates installed RAM in KB of this module.
columnInteger32.1.3.6.1.4.1.930.2.1.1.9.1.12
slotModuleFlashSize mandatory
This indicates installed flash size in KB of this module.
columnInteger32.1.3.6.1.4.1.930.2.1.1.9.1.13
slotModuleProductImageId mandatory
This indicates the product target image id of this module.
columnEnumeration.1.3.6.1.4.1.930.2.1.1.9.1.14
slotModuleBaseMacAddress mandatory
This object returns the module base Mac address. A physical port's default Mac address can be computed based on this address by using following computation: Port(n)…
columnMacAddress.1.3.6.1.4.1.930.2.1.1.9.1.15
slotLastResetEPC mandatory
The programe counter realated to the last reset.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.930.2.1.1.9.1.16
slotLastResetVirtualAddress mandatory
The bus address.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.930.2.1.1.9.1.17
slotLastResetCause mandatory
Register value related to the last reset
columnSNMPv2-SMICounter32.1.3.6.1.4.1.930.2.1.1.9.1.18
slotLastResetTimeStamp mandatory
A integer value of the system clock since last reset.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.930.2.1.1.9.1.19
slotConfigAdd mandatory
Setting this object causes the configuration of the slot to be updated to match the module currently in the slot. When read, this object always returns false(2).
columnBoolean.1.3.6.1.4.1.930.2.1.1.9.1.20
slotConfigExtClockSource mandatory
This field indicates the external clock source. 0 = Local Oscillator, 1..N = ATM port id for external clock source. This object only applies to ATM MDA modules with SM, MM, o…
columnInteger32.1.3.6.1.4.1.930.2.1.1.9.1.21
slotConfigTrafficShapingRate mandatory
Configured traffic shaping rate in kilo bits per second on an ATM module. The actual rate may be different from the configured rate depending upon the physical interface of ports…
columnInteger32.1.3.6.1.4.1.930.2.1.1.9.1.22
slotModuleHwVer mandatory
The hardware revision of the module.
columnOctetString.1.3.6.1.4.1.930.2.1.1.9.1.3
slotModuleSerialNumber mandatory
Module serial number. Format is 3 BCD digits.
columnOctetString.1.3.6.1.4.1.930.2.1.1.9.1.4
slotModuleSwVer mandatory
The software revision of the module.
columnRFC1213-MIBDisplayString.1.3.6.1.4.1.930.2.1.1.9.1.5
slotModuleStatus mandatory
This indicates the operational status of the module.
columnEnumeration.1.3.6.1.4.1.930.2.1.1.9.1.6
slotModuleLeds mandatory
Status of the module LEDs. Each LED bank is encoded in four bits (nibble), one bit for each LED. The least significant bit of each nibble represents the bottom LED of each bank. …
columnOctetString.1.3.6.1.4.1.930.2.1.1.9.1.7
slotModuleReset mandatory
This indicates the reset state of the module. Writing with the value reset (2) will reset the module.
columnEnumeration.1.3.6.1.4.1.930.2.1.1.9.1.8
slotConfigDelete mandatory
Setting this object causes the configuration of the slot to be deleted. When read, this object has a value of false(2).
columnBoolean.1.3.6.1.4.1.930.2.1.1.9.1.9