slotModuleStatus

CENTILLION-ROOT-MIB · .1.3.6.1.4.1.930.2.1.1.9.1.6
MIB view Table view

Object

column mandatory Enumeration 
This indicates the operational status of the module.

Context

MIB
CENTILLION-ROOT-MIB
OID
.1.3.6.1.4.1.930.2.1.1.9.1.6
Type
column
Access
readonly
Status
mandatory
Parent
slotConfigEntry
Table
slotConfigTable
Siblings
21

Syntax

Enumeration

Values & Constraints

Enumerated Values
1ok
2fail

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
slotNumber mandatory
The chassis slot number. Valid entries are system dependent based on the chassis type.
columnInteger32.1.3.6.1.4.1.930.2.1.1.9.1.1
slotConfigMediaType mandatory
The configured card media type. In the case of a card mismatch, the configured media type and the module type will not match.
columnSsMediaType.1.3.6.1.4.1.930.2.1.1.9.1.10
slotModuleMaxRAM mandatory
This indicates maximum RAM size in KB can be installed in this module.
columnInteger32.1.3.6.1.4.1.930.2.1.1.9.1.11
slotModuleInstalledRAM mandatory
This indicates installed RAM in KB of this module.
columnInteger32.1.3.6.1.4.1.930.2.1.1.9.1.12
slotModuleFlashSize mandatory
This indicates installed flash size in KB of this module.
columnInteger32.1.3.6.1.4.1.930.2.1.1.9.1.13
slotModuleProductImageId mandatory
This indicates the product target image id of this module.
columnEnumeration.1.3.6.1.4.1.930.2.1.1.9.1.14
slotModuleBaseMacAddress mandatory
This object returns the module base Mac address. A physical port's default Mac address can be computed based on this address by using following computation: Port(n)…
columnMacAddress.1.3.6.1.4.1.930.2.1.1.9.1.15
slotLastResetEPC mandatory
The programe counter realated to the last reset.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.930.2.1.1.9.1.16
slotLastResetVirtualAddress mandatory
The bus address.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.930.2.1.1.9.1.17
slotLastResetCause mandatory
Register value related to the last reset
columnSNMPv2-SMICounter32.1.3.6.1.4.1.930.2.1.1.9.1.18
slotLastResetTimeStamp mandatory
A integer value of the system clock since last reset.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.930.2.1.1.9.1.19
slotModuleType obsolete
Module type.
columnSsModuleType.1.3.6.1.4.1.930.2.1.1.9.1.2
slotConfigAdd mandatory
Setting this object causes the configuration of the slot to be updated to match the module currently in the slot. When read, this object always returns false(2).
columnBoolean.1.3.6.1.4.1.930.2.1.1.9.1.20
slotConfigExtClockSource mandatory
This field indicates the external clock source. 0 = Local Oscillator, 1..N = ATM port id for external clock source. This object only applies to ATM MDA modules with SM, MM, o…
columnInteger32.1.3.6.1.4.1.930.2.1.1.9.1.21
slotConfigTrafficShapingRate mandatory
Configured traffic shaping rate in kilo bits per second on an ATM module. The actual rate may be different from the configured rate depending upon the physical interface of ports…
columnInteger32.1.3.6.1.4.1.930.2.1.1.9.1.22
slotModuleHwVer mandatory
The hardware revision of the module.
columnOctetString.1.3.6.1.4.1.930.2.1.1.9.1.3
slotModuleSerialNumber mandatory
Module serial number. Format is 3 BCD digits.
columnOctetString.1.3.6.1.4.1.930.2.1.1.9.1.4
slotModuleSwVer mandatory
The software revision of the module.
columnRFC1213-MIBDisplayString.1.3.6.1.4.1.930.2.1.1.9.1.5
slotModuleLeds mandatory
Status of the module LEDs. Each LED bank is encoded in four bits (nibble), one bit for each LED. The least significant bit of each nibble represents the bottom LED of each bank. …
columnOctetString.1.3.6.1.4.1.930.2.1.1.9.1.7
slotModuleReset mandatory
This indicates the reset state of the module. Writing with the value reset (2) will reset the module.
columnEnumeration.1.3.6.1.4.1.930.2.1.1.9.1.8
slotConfigDelete mandatory
Setting this object causes the configuration of the slot to be deleted. When read, this object has a value of false(2).
columnBoolean.1.3.6.1.4.1.930.2.1.1.9.1.9