CADANT-CMTS-DOWNCHANNEL-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
7
Rows
7
Columns
72

cadIfDownstreamChannelTable

table
.1.3.6.1.4.1.4998.1.1.15.2.1 · 1 row entry · 22 columns
Open in standard view 
This table describes the attributes of downstream
channels (frequency bands).
cadIfDownstreamChannelEntry entry .1.3.6.1.4.1.4998.1.1.15.2.1.1
An entry provides a list of attributes for a single
Downstream channel.
An entry in this table exists for each ifEntry with an
ifType of docsCableDownstream(128).
Indexes
cadIfDownChannelIfIndex
Column Syntax OID
cadIfDownChannelId
The Cable Modem Termination System (CMTS) identification
of the downstream channel within this particular MAC
interface. If the interface is down, the object returns
the most current value. If the downstream channel ID …
Integer32
Constraints:
range: -1-255
 .1.3.6.1.4.1.4998.1.1.15.2.1.1.1
cadIfDownChannelFrequency
The center of the downstream frequency associated with
this channel. This object will return the current tuner
frequency. If this CMTS interface provides IF output only,
this object will return 0 and will be treated as…
hertzInteger32r/w
Constraints:
range: 0-1000000000
 .1.3.6.1.4.1.4998.1.1.15.2.1.1.2
cadIfDownChannelWidth
The bandwidth of this downstream channel. Most
implementations are expected to support a channel width
of 6 MHz (North America) and/or 8 MHz (Europe). See the
associated compliance object for a description of the
valid…
hertzInteger32r/w
Constraints:
range: 0-16000000
 .1.3.6.1.4.1.4998.1.1.15.2.1.1.3
cadIfDownChannelModulation
The modulation type associated with this downstream
channel. If the interface is down, this object either
returns the configured value (CMTS), the most current
value (CM), or the value of unknown(1). See the
associated…
Enumerationr/w
Enumerated Values:
1unknown
2other
3qam64
4qam256
 .1.3.6.1.4.1.4998.1.1.15.2.1.1.4
cadIfDownChannelInterleave
The Forward Error Correction (FEC) interleaving used
for this downstream channel.
Values are defined as follows:
taps8Increment16(3): protection 5.9/4.1 usec,
latency .22/.15 msec
taps16Incremen…
Enumerationr/w
Enumerated Values:
1unknown
2other
3taps8Increment16
4taps16Increment8
5taps32Increment4
6taps64Increment2
7taps128Increment1
8taps12increment17
9taps128increment2
10taps128increment3
11taps128increment4
12taps128increment5
13taps128increment6
14taps128increment7
15taps128increment8
 .1.3.6.1.4.1.4998.1.1.15.2.1.1.5
cadIfDownChannelPower
The CMTS operational transmit power. If this CMTS
interface does not support output power control then
this object will return 0 and be treated as read-only.
If the interface is down, this object either returns
the con…
dBmVInteger32r/w
Constraints:
range: 0-0
range: 250-600
 .1.3.6.1.4.1.4998.1.1.15.2.1.1.6
cadIfDownChannelPowerFineAdj
At the CMTS, the fine power adjustments steps to increase
or decrease the output power in incremental steps.
StepsInteger32r/w
Constraints:
range: -80-0
 .1.3.6.1.4.1.4998.1.1.15.2.1.1.7
cadIfCmtsCardNumber
Card Number associated with this Channel.
CADANT-TCCardId
Textual Convention: CADANT-TCCardId Integer32
Type Constraints:
range: 0..99
 .1.3.6.1.4.1.4998.1.1.15.2.1.1.19
cadIfDownChannelCACL1Threshold
Percentage of available bandwidth on the channel that can
be reserved for admitted/active service flows before the
channel goes into Level 1 Overload. When a channel goes
into Level 1 Overload, a warning message will …
Integer32r/w
Constraints:
range: 0-1000
 .1.3.6.1.4.1.4998.1.1.15.2.1.1.21
cadIfDownChannelCACL2Threshold
Percentage of available bandwidth on the channel that can
be reserved for admitted/active service flows before the
channel goes into Level 2 Overload. When a channel goes
into Level 2 Overload, a warning message will …
Integer32r/w
Constraints:
range: 0-1000
 .1.3.6.1.4.1.4998.1.1.15.2.1.1.22
cadIfDownChannelCACL3Threshold
Percentage of available bandwidth on the channel that can
be reserved for admitted/active service flows. A
Registration Request, DSA Request or DSC Request will be
denied due to temporary resource limitations if it wo…
Integer32r/w
Constraints:
range: 0-1000
 .1.3.6.1.4.1.4998.1.1.15.2.1.1.23
cadIfDownChannelMaxRoundTripDelay
Maximum round-trip propagation delay for cable
plant in Microseconds. Should be configured for
the furthest CM in all cable groups containing
this DownChannel. Default of 1600 Microseconds
is approxiamately 100 miles …
MicrosecondsInteger32r/w
Constraints:
range: 200-1600
 .1.3.6.1.4.1.4998.1.1.15.2.1.1.24
cadIfDownChannelAnnex
The value of this object indicates the conformance of
the implementation to important regional cable standards.
annexA : Annex A from ITU-J83 is used.
annexB : Annex B from ITU-J83 is used.
annexC : Annex C from ITU-J83…
Enumerationr/w
Enumerated Values:
1unknown
2other
3annexA
4annexB
5annexC
 .1.3.6.1.4.1.4998.1.1.15.2.1.1.26
cadIfDownChannelPCNormAllowedUsage
Maximum percentage of downstream resources that may be
used by non-emergency telephony services. This is also
the maximum amount of resources non-exclusively allocated
to sessions of this type. The default is set f…
percentInteger32r/w
Constraints:
range: 0-100
 .1.3.6.1.4.1.4998.1.1.15.2.1.1.27
cadIfDownChannelPCNormResUsage
Minimum percentage of downstream resources that may be
used by non-emergency telephony services. This is also
the maximum amount of resources exclusively allocated
to sessions of this type. If the value of this obje…
percentInteger32r/w
Constraints:
range: 0-100
 .1.3.6.1.4.1.4998.1.1.15.2.1.1.28
cadIfDownChannelPCEmerAllowedUsage
Maximum percentage of downstream resources that may
be used by emergency telephony services. The default
is set from the globals in CadPCMibBase.
percentInteger32r/w
Constraints:
range: 0-100
 .1.3.6.1.4.1.4998.1.1.15.2.1.1.29
cadIfDownChannelPCEmerResUsage
Minimum percentage of downstream resources that may be
used by emergency telephony services. If the value of
this object is non-zero, then a portion of the downstream
bandwidth will be set aside for normal telephon…
percentInteger32r/w
Constraints:
range: 0-100
 .1.3.6.1.4.1.4998.1.1.15.2.1.1.30
cadIfDownChannelPCTotalAllowedUsage
Maximum percentage of downstream resources that may
be used by both normal and emergency telephony services.
The default is set from the globals in CadPCMibBase.
percentInteger32r/w
Constraints:
range: 0-100
 .1.3.6.1.4.1.4998.1.1.15.2.1.1.31
cadIfDownChannelPCPreemptionAllowed
Indicates whether the system will preempt another session
for an emergency call. The default is set from the
globals in CadPCMibBase.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.4998.1.1.15.2.1.1.32
cadIfDownChannelIfIndex
the ifIndex of this downstream channel.
IF-MIBInterfaceIndex
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.4998.1.1.15.2.1.1.37
cadIfDownChannelPrimaryCapable
When a row's cadIfDownChannelPrimaryCapable column is set to true(1)
then DOCSIS SYNC message generation is enabled on the downstream channel.
Otherwise, DOCSIS SYNC message generation is disabled.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.4998.1.1.15.2.1.1.38
cadIfDownSpectralInversion
When a row's cadIfDownSpectralInversion column is set to true(1),
then spectral inversion is enabled. Otherwise, spectral inversion
is disabled. Note that spectral inversion is a video PHY parameter
not used with DOCS…
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.4998.1.1.15.2.1.1.39

cadIfDsOfdmPowerTable

table
.1.3.6.1.4.1.4998.1.1.15.2.3 · 1 row entry · 6 columns
Open in standard view 
This status table contains the power parameters for a DS 
OFDM channel.
cadIfDsOfdmPowerEntry entry .1.3.6.1.4.1.4998.1.1.15.2.3.1
An entry shows the power setting and measured power
for one of the frequencies within an OFDM channel.
Indexes
cadIfDsOfdmPowerIfIndex cadIfDsOfdmPowerFrequency
Column Syntax OID
cadIfDsOfdmPowerIfIndex
The ifIndex of this downstream OFDM channel.
IF-MIBInterfaceIndex
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.4998.1.1.15.2.3.1.1
cadIfDsOfdmPowerFrequency
A relative frequency within the OFDM channel for power
control/status, in 6 MHz increments(i.e., legal values
are 3, 9, 15, etc).
MHzInteger32
Constraints:
range: 0-192
 .1.3.6.1.4.1.4998.1.1.15.2.3.1.2
cadIfDsOfdmPowerFineAdjustment
The configured power for this OFDM channel frequency. This
consists of the base RF port power per channel plus any
configured tilt adjustment.
dBmVtenthsInteger32r/w
Constraints:
range: -80-0
 .1.3.6.1.4.1.4998.1.1.15.2.3.1.3
cadIfDsOfdmPowerCurrLevel
The latest downstream power level reported by the port for
this frequency.
DOCS-IF-MIBTenthdBmV
Textual Convention: DOCS-IF-MIBTenthdBmV Integer32
 .1.3.6.1.4.1.4998.1.1.15.2.3.1.4
cadIfDsOfdmPowerMinLevel
The minimum downstream power level read on the port for
this frequency.
DOCS-IF-MIBTenthdBmV
Textual Convention: DOCS-IF-MIBTenthdBmV Integer32
 .1.3.6.1.4.1.4998.1.1.15.2.3.1.5
cadIfDsOfdmPowerMaxLevel
The minimum downstream power level reported by the port for
this frequency.
DOCS-IF-MIBTenthdBmV
Textual Convention: DOCS-IF-MIBTenthdBmV Integer32
 .1.3.6.1.4.1.4998.1.1.15.2.3.1.6

cadIfDsOfdmChlTable

table
.1.3.6.1.4.1.4998.1.1.15.2.5 · 1 row entry · 22 columns
Open in standard view 
This table describes the attributes of downstream
OFDM channels.
cadIfDsOfdmChlEntry entry .1.3.6.1.4.1.4998.1.1.15.2.5.1
An entry provides a list of attributes for a single
OFDM Downstream channel.
An entry in this table exists for each ifEntry with an
ifType of docsOfdmDownstream (277).
Indexes
cadIfDsOfdmChlIfIndex
Column Syntax OID
cadIfDsOfdmChlIfIndex
The ifIndex of this OFDM downstream channel.
IF-MIBInterfaceIndex
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.4998.1.1.15.2.5.1.1
cadIfDsOfdmChlLowFreq
The lowest subcarrier center frequency of the low guard band
just below the encompassed spectrum. While this is the center
frequency of a subcarrier, it is the low edge frequency of
the OFDM channel. The center freque…
hertzInteger32r/w
Constraints:
range: 0-0
range: 108000000-1770000000
 .1.3.6.1.4.1.4998.1.1.15.2.5.1.2
cadIfDsOfdmChlHighFreq
The highest subcarrier center frequency of the high guard band
just above the encompassed spectrum. While this is the center
frequency of a subcarrier, it is the high edge frequency of
the OFDM channel. Zero means not…
hertzInteger32r/w
Constraints:
range: 0-0
range: 132000000-1794000000
 .1.3.6.1.4.1.4998.1.1.15.2.5.1.3
cadIfDsOfdmChlPlcBlkLowSubcCentFreq
The center frequency of the lowest frequency subcarrier of
the 6 MHz encompassed spectrum containing the PLC.
Must be an integral number of Megahertz. Zero
means not configured. Must be configured to go in-service.
hertzInteger32r/w
Constraints:
range: 0-0
range: 108000000-1788000000
 .1.3.6.1.4.1.4998.1.1.15.2.5.1.4
cadIfDsOfdmChlCyclicPrefix
The cyclic-prefix, converted into samples
using the sample rate of 204.8 Million samples/second.
samplesInteger32r/w
Constraints:
range: 192-192
range: 256-256
range: 512-512
range: 768-768
range: 1024-1024
 .1.3.6.1.4.1.4998.1.1.15.2.5.1.5
cadIfDsOfdmChlRolloffPeriod
The roll-off period used in windowing, converted into samples
using the sample rate of 204.8 Million samples/second.
samplesInteger32r/w
Constraints:
range: 256-256
range: 0-0
range: 64-64
range: 128-128
range: 192-192
 .1.3.6.1.4.1.4998.1.1.15.2.5.1.6
cadIfDsOfdmChlTimeIntlvrDepth
The number of symbols in the time domain for
interleaving. The range is 1..32 for 50 KHz
subcarrier spacing, and 1..16 for 25 KHz spacing.
A value of one means no time interleaving.
symbolsInteger32r/w
Constraints:
range: 1-32
 .1.3.6.1.4.1.4998.1.1.15.2.5.1.7
cadIfDsOfdmChlSubcSpacing
The subcarrier frequency width for this OFDM channel.
hertzInteger32r/w
Constraints:
range: 50000-50000
range: 25000-25000
 .1.3.6.1.4.1.4998.1.1.15.2.5.1.8
cadIfDsOfdmChlContPilotScaleFactor
The scale factor M used to calculate the total number of
continuous pilots defined using the PLC. The number
of continuous pilots also
depends on the encompassed bandwidth.
Integer32r/w
Constraints:
range: 48-120
 .1.3.6.1.4.1.4998.1.1.15.2.5.1.9
cadIfDsOfdmChlMaxRoundTripDelay
Maximum round-trip propagation delay for cable
plant in Microseconds. Should be configured for
the furthest CM in all cable groups containing
this DownChannel. Default of 800 Microseconds
is approxiamately 50 miles be…
MicrosecondsInteger32r/w
Constraints:
range: 200-1600
 .1.3.6.1.4.1.4998.1.1.15.2.5.1.10
cadIfDsOfdmChlPCNormAllowedUsage
Maximum percentage of downstream resources that may be
used by non-emergency telephony services. This is also
the maximum amount of resources non-exclusively allocated
to sessions of this type. The default is set f…
percentInteger32r/w
Constraints:
range: 0-100
 .1.3.6.1.4.1.4998.1.1.15.2.5.1.11
cadIfDsOfdmChlPCNormResUsage
Minimum percentage of downstream resources that may be
used by non-emergency telephony services. This is also
the maximum amount of resources exclusively allocated
to sessions of this type. If the value of this obje…
percentInteger32r/w
Constraints:
range: 0-100
 .1.3.6.1.4.1.4998.1.1.15.2.5.1.12
cadIfDsOfdmChlPCEmerAllowedUsage
Maximum percentage of downstream resources that may
be used by emergency telephony services. The default
is set from the globals in CadPCMibBase.
percentInteger32r/w
Constraints:
range: 0-100
 .1.3.6.1.4.1.4998.1.1.15.2.5.1.13
cadIfDsOfdmChlPCEmerResUsage
Minimum percentage of downstream resources that may be
used by emergency telephony services. If the value of
this object is non-zero, then a portion of the downstream
bandwidth will be set aside for normal telephon…
percentInteger32r/w
Constraints:
range: 0-100
 .1.3.6.1.4.1.4998.1.1.15.2.5.1.14
cadIfDsOfdmChlPCTotalAllowedUsage
Maximum percentage of downstream resources that may
be used by both normal and emergency telephony services.
The default is set from the globals in CadPCMibBase.
percentInteger32r/w
Constraints:
range: 0-100
 .1.3.6.1.4.1.4998.1.1.15.2.5.1.15
cadIfDsOfdmChlPCPreemptionAllowed
Indicates whether the system will preempt another session
for an emergency call. The default is set from the
globals in CadPCMibBase.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.4998.1.1.15.2.5.1.16
cadIfDsOfdmChlRfPortBasePower
The CCAP operational transmit power. See the
reference for recommended and required power levels
for the equivalent total number of 6 MHz channels on
the RF port. The default is the DRFI maximum for 48 6 MHz SC
channe…
dBmVInteger32r/w
Constraints:
range: 250-600
 .1.3.6.1.4.1.4998.1.1.15.2.5.1.17
cadIfDsOfdmChlSubcZeroCentFreq
The center frequency of subcarrier 0. This is 102.4 MHz less
than (cadIfDsOfdmChlLowFreq + cadIfDsOfdmChlHighFreq)/2
if cadIfDsOfdmChlLowFreq is divisible by 250 KHz.
Otherwise, it is 102.525 MHz less
than (cadIfDsOfd…
hertzSNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4998.1.1.15.2.5.1.18
cadIfDsOfdmChlLowActSubcCentFreq
The low center frequency of the lowest active subcarrier in the
OFDM channel. The low edge of the encompassed spectrum is
half a subcarrier less than this value.
hertzSNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4998.1.1.15.2.5.1.19
cadIfDsOfdmChlHighActSubcCentFreq
The high center frequency of the highest active subcarrier in the
the OFDM channel. The high edge of the encompassed spectrum is
half a subcarrier more than this value.
hertzSNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4998.1.1.15.2.5.1.20
cadIfDsOfdmChlPlcLowSubcCentFreq
The center frequency of the lowest frequency subcarrier of
the PLC itself. By definition, this is 2.8 MHz higher than
cadIfDsOfdmChlPlcBlkLowSubcCentFreq (i.e., the PLC block
is 6 MHz, and the 400 KHz PLC is centered i…
hertzSNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4998.1.1.15.2.5.1.21
cadIfDsOfdmChlNumActSubc
The configured number of subcarriers based on the high and low
center frequencies of the active subcarriers in the
the OFDM channel.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4998.1.1.15.2.5.1.22

cadIfDsOfdmChlDataTable

table
.1.3.6.1.4.1.4998.1.1.15.2.6 · 1 row entry · 2 columns
Open in standard view 
This table describes the read-only attributes of 
downstream OFDM channels (frequency bands).
cadIfDsOfdmChlDataEntry entry .1.3.6.1.4.1.4998.1.1.15.2.6.1
An entry provides a list of read-only attributes for a single
OFDM downstream channel.
An entry in this table exists for each ifEntry with an
ifType of docsOfdmDownstream (277).
Indexes
No indexes recorded
Column Syntax OID
cadIfDsOfdmChlDataNumActSubcarriers
The number of non-excluded subcarriers in the OFDM channel.
7600 is the maximum allowed for a 190 MHz of active
Spectrum. 350 would be the worst case for 22 MHz of
Active spectrum with 50 KHz subcarriers, with 20 percen…
Integer32
Constraints:
range: 200-7600
range: 0-0
 .1.3.6.1.4.1.4998.1.1.15.2.6.1.1
cadIfDsOfdmChlDataNumContPilots
The total number of continuous pilots. The total number of
of continuous pilots is the number defined by the PLC
plus the 8 pre-defined ones positioned around the PLC.
Integer32
Constraints:
range: 16-128
range: 0-0
 .1.3.6.1.4.1.4998.1.1.15.2.6.1.2

cadDsOfdmProfileTable

table
.1.3.6.1.4.1.4998.1.1.15.2.8 · 1 row entry · 4 columns
Open in standard view 
This table defines the profiles assigned to an OFDM channel.
cadDsOfdmProfileEntry entry .1.3.6.1.4.1.4998.1.1.15.2.8.1
An entry defines one profile on one channel.
Indexes
cadDsOfdmProfileIfIndex cadDsOfdmProfileId
Column Syntax OID
cadDsOfdmProfileIfIndex
The ifIndex of the channel using this profile.
IF-MIBInterfaceIndex
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.4998.1.1.15.2.8.1.1
cadDsOfdmProfileId
The ID of a profile plus one.
OfdmProfileId
Textual Convention: OfdmProfileId Integer32
Type Constraints:
range: 1..3
range: 256
 .1.3.6.1.4.1.4998.1.1.15.2.8.1.2
cadDsOfdmProfileDefBitload
The default bit-loading (modulation) for this profile.
If cadDsOfdmProfileId is 256, only qpsk, qam16,
and qam64 are legal. Otherwise, all but qpsk and qam0
are legal.
CerOfdmModTyper/w
Textual Convention: CerOfdmModType Enumeration
Type Values:
0qam0
2qpsk
4qam16
6qam64
7qam128
8qam256
9qam512
10qam1024
11qam2048
12qam4096
13qam8192
14qam16384
 .1.3.6.1.4.1.4998.1.1.15.2.8.1.3
cadDsOfdmProfileRowStatus
The RowStatus for controlling entries in this table.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.4998.1.1.15.2.8.1.4

cadDsOfdmProfStatTable

table
.1.3.6.1.4.1.4998.1.1.15.2.9 · 1 row entry · 8 columns
Open in standard view 
This table provides counts and the average bits per Hertz
per OFDM channel per profile.
cadDsOfdmProfStatEntry entry .1.3.6.1.4.1.4998.1.1.15.2.9.1
An entry provides the values for one profile on one channel.
Indexes
cadDsOfdmProfStatIfIndex cadDsOfdmProfStatProfId
Column Syntax OID
cadDsOfdmProfStatIfIndex
The ifIndex of this OFDM downstream channel.
IF-MIBInterfaceIndex
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.4998.1.1.15.2.9.1.1
cadDsOfdmProfStatProfId
The profile number plus one of this profile on this channel.
OfdmProfileId
Textual Convention: OfdmProfileId Integer32
Type Constraints:
range: 1..3
range: 256
 .1.3.6.1.4.1.4998.1.1.15.2.9.1.2
cadDsOfdmProfStatAvgBitsPerSubc
The average number of bits per subcarrier times 100 across all
active subcarriers on the channel, rounded to nearest
hundredth. Continuous pilots and subcarriers in the PLC are
not included in this calculation, even th…
HundredthBitSNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4998.1.1.15.2.9.1.3
cadDsOfdmProfStatReqMods
The modulations used by this profile and any exceptions
to this profile.
CerOfdmModBitsType
Textual Convention: CerOfdmModBitsType Bits
Type Values:
0qam32768
1qam16384
2qam8192
3qam4096
4qam2048
5qam1024
6qam512
7qam256
8qam128
9qam64
10qam32
11qam16
12qam8
13qpsk
14bpsk
15zeroBitload
 .1.3.6.1.4.1.4998.1.1.15.2.9.1.4
cadDsOfdmProfStatEtherFrameBytes
The count of Layer 2 Ethernet frame bytes that have
been sent on this channel using this specific profile.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.4998.1.1.15.2.9.1.5
cadDsOfdmProfStatTotalCodewords
The number of codewords sent on this channel
using this specific profile.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.4998.1.1.15.2.9.1.6
cadDsOfdmProfStat30SecCwUtil
The codeword utilization percentage of this profile
on this channel. The utilization is measured over
the last 30 seconds.
Unsigned32
Constraints:
range: 0-100
 .1.3.6.1.4.1.4998.1.1.15.2.9.1.7
cadDsOfdmProfStat30SecCwEff
The Efficiency percentage of this profile on
this channel over the last 30 seconds (i.e,.
the average number of data bits per codeword
used by this profile, divided by the size of
a codeword).
Unsigned32
Constraints:
range: 0-100
 .1.3.6.1.4.1.4998.1.1.15.2.9.1.8

cadDsOfdmProfExceptionTable

table
.1.3.6.1.4.1.4998.1.1.15.2.11 · 1 row entry · 8 columns
Open in standard view 
This table defines exceptions to profiles on an OFDM channel.
cadDsOfdmProfExceptionEntry entry .1.3.6.1.4.1.4998.1.1.15.2.11.1
An entry defines one profile exception.
Indexes
cadDsOfdmProfExceptionIfIndex cadDsOfdmProfExceptionProfId cadDsOfdmProfExceptionLowFreq
Column Syntax OID
cadDsOfdmProfExceptionIfIndex
The ifIndex of the channel using this profile.
IF-MIBInterfaceIndex
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.4998.1.1.15.2.11.1.1
cadDsOfdmProfExceptionProfId
The Id of a profile plus one.
OfdmProfileId
Textual Convention: OfdmProfileId Integer32
Type Constraints:
range: 1..3
range: 256
 .1.3.6.1.4.1.4998.1.1.15.2.11.1.2
cadDsOfdmProfExceptionLowFreq
The low edge frequency of a frequency range being assigned
a different bit-loading type from the default for the profile.
hertzInteger32
Constraints:
range: 108000000-1770000000
 .1.3.6.1.4.1.4998.1.1.15.2.11.1.3
cadDsOfdmProfExceptionHighFreq
The high edge frequency of a frequency range being assigned
a different bit-loading type from the default for the profile.
hertzInteger32r/w
Constraints:
range: 0-0
range: 108000000-1770000000
 .1.3.6.1.4.1.4998.1.1.15.2.11.1.4
cadDsOfdmProfExceptionSkip
True if using different bit-loading for odd and even
numbered subcarriers in this frequency range. False if
all subcarriers in the range use the single bit-loading
type given by cadDsOfdmProfExceptionMainBitload.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.4998.1.1.15.2.11.1.5
cadDsOfdmProfExceptionMainBitload
The main bit-loading (modulation) for this frequency range.
If skip is true, this is the bit-loading for only the even
numbered subcarriers. If false, it is for all subcarriers.
CerOfdmModTyper/w
Textual Convention: CerOfdmModType Enumeration
Type Values:
0qam0
2qpsk
4qam16
6qam64
7qam128
8qam256
9qam512
10qam1024
11qam2048
12qam4096
13qam8192
14qam16384
 .1.3.6.1.4.1.4998.1.1.15.2.11.1.6
cadDsOfdmProfExceptionOddBitload
The bit-loading (modulation) for the odd numbered
subcarriers when skip is true. Ignored if skip is false.
CerOfdmModTyper/w
Textual Convention: CerOfdmModType Enumeration
Type Values:
0qam0
2qpsk
4qam16
6qam64
7qam128
8qam256
9qam512
10qam1024
11qam2048
12qam4096
13qam8192
14qam16384
 .1.3.6.1.4.1.4998.1.1.15.2.11.1.7
cadDsOfdmProfExceptionRowStatus
The RowStatus for controlling entries in this table.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.4998.1.1.15.2.11.1.8