BIANCA-BRICK-ATM2-MIB Table View
Table-centric layout grouping table, row, and column objects.
Tables
11
Rows
11
Columns
131
.1.3.6.1.4.1.272.4.16.10
·
1 row entry
·
18 columns
The atmIfTable displays all available ATM capable interfaces.
An interface entry containing objects at the
subnetwork layer and below for a particular
interface.
subnetwork layer and below for a particular
interface.
Indexes
atmIfIndex
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
atmIfIndex
mandatory
The interface index of the associated ATM hardware.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.272.4.16.10.1.1 |
||||||||
|
atmIfType
mandatory
This object contains an interface type.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.272.4.16.10.1.2 |
||||||||
|
atmIfDescr
mandatory
Short description for this object.
|
.1.3.6.1.4.1.272.4.16.10.1.3 |
|||||||||
|
atmIfAdminStatus
mandatory
This object contains the desired state of the ATM interface.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.272.4.16.10.1.4 |
||||||||
|
atmIfOperStatus
mandatory
The current operational state of the ATM interface.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.272.4.16.10.1.5 |
||||||||
|
atmIfLastChange
mandatory
The value of sysUpTime at the time the interface entered
its current operational state. If the current state was entered prior to the last re-initialization of the local network management subsystem, then this object co… |
RFC1155-SMITimeTicks Textual Convention: RFC1155-SMITimeTicks Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.272.4.16.10.1.6 |
||||||||
|
atmIfMaxTxRate
mandatory
This object enables traffic shaping on the related ATM
interface. If set to zero (0) there is no shaping active. Otherwise this variable defines the maximum amount of bits per second to be transmitted. Note that the max… |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.272.4.16.10.1.7 |
||||||||
|
atmIfOperMode
mandatory
The current operational mode of the ATM interface.
The value atm(1) means ATM is used on the line. The value efm(2) means ATM is used only internally and Ethernet with HDLC framing is used on the line. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.272.4.16.10.1.8 |
||||||||
|
atmIfInPkts
mandatory
The number of reassembled received packets.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.272.4.16.10.1.22 |
||||||||
|
atmIfOutPkts
mandatory
This number of transmitted packets.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.272.4.16.10.1.23 |
||||||||
|
atmIfRxSpeed
mandatory
This object contains the receive interface speed.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.272.4.16.10.1.24 |
||||||||
|
atmIfTxSpeed
mandatory
This object contains the transmit interface speed.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.272.4.16.10.1.25 |
||||||||
|
atmIfInOctets
mandatory
The total number of octets received on the interface,
including framing characters. |
RFC1155-SMICounter Textual Convention: RFC1155-SMICounter Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.272.4.16.10.1.26 |
||||||||
|
atmIfInDiscards
mandatory
The number of inbound packets which were chosen to be
discarded even though no errors had been detected to prevent their being deliverable to a higher-layer protocol. One possible reason for discarding such a packet cou… |
RFC1155-SMICounter Textual Convention: RFC1155-SMICounter Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.272.4.16.10.1.27 |
||||||||
|
atmIfInErrors
mandatory
The number of inbound packets that contained errors preventing
them from being deliverable to a higher-layer protocol. |
RFC1155-SMICounter Textual Convention: RFC1155-SMICounter Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.272.4.16.10.1.28 |
||||||||
|
atmIfOutOctets
mandatory
The total number of octets transmitted out of the interface,
including framing characters. |
RFC1155-SMICounter Textual Convention: RFC1155-SMICounter Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.272.4.16.10.1.29 |
||||||||
|
atmIfOutDiscards
mandatory
The number of outbound packets which were chosen to be
discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a packet could be to free up buffer s… |
RFC1155-SMICounter Textual Convention: RFC1155-SMICounter Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.272.4.16.10.1.30 |
||||||||
|
atmIfOutErrors
mandatory
The number of outbound packets that could not be transmitted
because of errors. |
RFC1155-SMICounter Textual Convention: RFC1155-SMICounter Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.272.4.16.10.1.31 |
.1.3.6.1.4.1.272.4.16.11
·
1 row entry
·
3 columns
A table of status and parameter information on the virtual path connections which cross this UNI. There is one entry in this table for each permanent virtual path connection. This is the lite version of ATM-FORUM-MIB DEFINITIONS
An entry in the table, containing information about a
particular virtual path connection.
particular virtual path connection.
Indexes
atmVpcPortIndex atmVpcVpi
| Column | Syntax | OID | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
atmVpcPortIndex
mandatory
The interface index of the associated ATM hardware.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.272.4.16.11.1.1 |
||||||||||
|
atmVpcVpi
mandatory
The VPI value of this Virtual Path Connection.
|
Integer32 Constraints: range: 0-255 |
.1.3.6.1.4.1.272.4.16.11.1.2 |
||||||||||
|
atmVpcOperStatus
mandatory
The present actual operational status of the VPC. A value of
end2endUp(2) or end2endDown(3) would be used if the end-to-end status is known. If only local status information is available, a value of localUpEnd2endUnknow… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.272.4.16.11.1.3 |
.1.3.6.1.4.1.272.4.16.12
·
1 row entry
·
4 columns
A table of status and parameter information on the virtual channel connections which are visible at this UNI. There is one entry in this table for each permanent virtual channel connection, including reserved VCCs that are supported; e.g., signalling, OAM flows, and ILMI, but not unassigned cells. This is the lite version of ATM-FORUM-MIB DEFINITIONS
An entry in the table, containing information about a
particular virtual channel connection.
particular virtual channel connection.
Indexes
atmVccPortIndex atmVccVpi atmVccVci
| Column | Syntax | OID | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
atmVccPortIndex
mandatory
The interface index of the associated ATM hardware.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.272.4.16.12.1.1 |
||||||||||
|
atmVccVpi
mandatory
The VPI value of this Virtual Channel Connection.
|
Integer32 Constraints: range: 0-255 |
.1.3.6.1.4.1.272.4.16.12.1.2 |
||||||||||
|
atmVccVci
mandatory
The VCI value of this Virtual Channel Connection.
|
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.272.4.16.12.1.3 |
||||||||||
|
atmVccOperStatus
mandatory
The present actual operational status of the VCC. A value
of end2endUp(2) or end2endUp(3) is used if the end-to-end status is known. If only local status is known a value of localUpEnd2endUnknown(4) or localDown(5) is u… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.272.4.16.12.1.4 |
.1.3.6.1.4.1.272.4.16.13
·
1 row entry
·
14 columns
This tables contains all OAM configuration parameters.
Indexes
atmOamAtmIfIndex atmOamVpi atmOamVci
| Column | Syntax | OID | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
atmOamAtmIfIndex
mandatory
The interface index of the associated ATM hardware.
|
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.272.4.16.13.1.1 |
||||||||||
|
atmOamVpi
mandatory
The VPI value of this Virtual Path/Channel Connection.
|
Integer32r/w Constraints: range: 0-255 |
.1.3.6.1.4.1.272.4.16.13.1.2 |
||||||||||
|
atmOamVci
mandatory
The VCI value of this Virtual Channel Connection.
|
Integer32r/w Constraints: range: 0-65535 |
.1.3.6.1.4.1.272.4.16.13.1.3 |
||||||||||
|
atmOamFlowLevel
mandatory
The OAM hierarchical flow levels : VC (F5) or VP (F4).
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.272.4.16.13.1.4 |
||||||||||
|
atmOamLoopbackEnd2End
mandatory
Indicates wether OAM loopback is enabled onto the end-to-end
connection. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.272.4.16.13.1.5 |
||||||||||
|
atmOamLoopbackSegment
mandatory
Indicates wether active OAM loopback is enabled onto the
segment connection. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.272.4.16.13.1.6 |
||||||||||
|
atmOamLoopbackEnd2EndInterval
mandatory
OAM loopback transmit interval (in seconds) for end-to-end
context. |
Integer32r/w Constraints: range: 0-999 |
.1.3.6.1.4.1.272.4.16.13.1.7 |
||||||||||
|
atmOamLoopbackSegmentInterval
mandatory
OAM loopback transmit interval (in seconds) for segment
context. |
Integer32r/w Constraints: range: 0-999 |
.1.3.6.1.4.1.272.4.16.13.1.8 |
||||||||||
|
atmOamLoopbackEnd2EndMaxPending
mandatory
Specifies the maximum number of outstanding OAM loopback
responses after which the associated F4/F5 instance will be set into the end-to-end operational down status. |
Integer32r/w Constraints: range: 0-999 |
.1.3.6.1.4.1.272.4.16.13.1.9 |
||||||||||
|
atmOamLoopbackSegmentMaxPending
mandatory
Specifies the maximum number of outstanding OAM loopback
responses after which the associated F4/F5 instance will be set into the segment operational down status. |
Integer32r/w Constraints: range: 0-999 |
.1.3.6.1.4.1.272.4.16.13.1.10 |
||||||||||
|
atmOamCCEnd2EndActivation
mandatory
Determines wether OAM continuity check activation request
will be activated and/or accepted for the associated end-to-end connection. If set to passive(1) or both(3) CC activation requests will be confirmed. If set to … |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.272.4.16.13.1.11 |
||||||||||
|
atmOamCCSegmentActivation
mandatory
Determines wether OAM continuity check activation request
will be activated and/or accepted for the associated segment connection. If set to passive(1) or both(3) CC activation requests will be confirmed. If set to acti… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.272.4.16.13.1.12 |
||||||||||
|
atmOamCCEnd2EndDirection
mandatory
Determines OAM continuity check direction (for end-to-end).
If set to sink(1) CC cells will be received only, if set to source(2) CC cells will be generated periodically, if set to both(3) CC cells will be received from… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.272.4.16.13.1.13 |
||||||||||
|
atmOamCCSegmentDirection
mandatory
Determines OAM continuity check direction (for segment).
If set to sink(1) CC cells will be received only, if set to source(2) CC cells will be generated periodically, if set to both(3) CC cells will be received from th… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.272.4.16.13.1.14 |
.1.3.6.1.4.1.272.4.16.14
·
1 row entry
·
26 columns
This tables displays all used VCs.
Indexes
atmOamStatAtmIfIndex atmOamStatVpi atmOamStatVci
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
atmOamStatAtmIfIndex
mandatory
The interface index of the associated ATM hardware.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.272.4.16.14.1.1 |
||||||||
|
atmOamStatVpi
mandatory
The VPI value of this Virtual Path Connection.
|
Integer32 Constraints: range: 0-255 |
.1.3.6.1.4.1.272.4.16.14.1.2 |
||||||||
|
atmOamStatVci
mandatory
The VCI value of this Virtual Channel Connection.
|
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.272.4.16.14.1.3 |
||||||||
|
atmOamStatFlowType
mandatory
The OAM hierarchical flow levels: see ITU I.610
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.272.4.16.14.1.4 |
||||||||
|
atmOamStatLoopbackTxCells
mandatory
The number of OAM loopback cells that have been sent
to the target in this sequence. |
RFC1155-SMICounter Textual Convention: RFC1155-SMICounter Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.272.4.16.14.1.6 |
||||||||
|
atmOamStatLoopbackRxCells
mandatory
The number of OAM loopback cells that have been received
from the target in this sequence. |
RFC1155-SMICounter Textual Convention: RFC1155-SMICounter Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.272.4.16.14.1.7 |
||||||||
|
atmOamStatLoopbackPending
mandatory
The number of currently outstanding OAM loopback responses.
|
RFC1155-SMICounter Textual Convention: RFC1155-SMICounter Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.272.4.16.14.1.8 |
||||||||
|
atmOamStatLoopbackCorr
mandatory
The correlation of the last sent loopback message.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.272.4.16.14.1.9 |
||||||||
|
atmOamStatAisState
mandatory
The AIS state is set to on(2) after receiving an AIS cell
or detection of LOC (Loss of Continuity). The Ais state is set to off(1) either when receiving user cells (same VCC context) or via timeout. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.272.4.16.14.1.10 |
||||||||
|
atmOamStatAisTxCells
mandatory
The number of OAM alarm indication signal (AIS) cells
that have been transmitted since last change of AisState. |
RFC1155-SMICounter Textual Convention: RFC1155-SMICounter Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.272.4.16.14.1.11 |
||||||||
|
atmOamStatAisRxCells
mandatory
The number of OAM alarm indication signal (AIS) cells
that have been received since last change of AisState. |
RFC1155-SMICounter Textual Convention: RFC1155-SMICounter Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.272.4.16.14.1.12 |
||||||||
|
atmOamStatTotalAisTxCells
mandatory
The total number of OAM alarm indication signal (AIS) cells
that have been transmitted. |
RFC1155-SMICounter Textual Convention: RFC1155-SMICounter Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.272.4.16.14.1.13 |
||||||||
|
atmOamStatTotalAisRxCells
mandatory
The total number of OAM alarm indication signal (AIS) cells
that have been received. |
RFC1155-SMICounter Textual Convention: RFC1155-SMICounter Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.272.4.16.14.1.14 |
||||||||
|
atmOamStatRdiState
mandatory
The RDI state is set to on(2) after receiving a RDI cell.
The RDI state is to off(1) via timeout. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.272.4.16.14.1.15 |
||||||||
|
atmOamStatRdiTxCells
mandatory
The number of OAM remote defect indication (RDI) cells
that have been transmitted since last change of RdiState. |
RFC1155-SMICounter Textual Convention: RFC1155-SMICounter Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.272.4.16.14.1.16 |
||||||||
|
atmOamStatRdiRxCells
mandatory
The number of OAM remote defect indication (RDI) cells
that have been received since last change of RdiState. |
RFC1155-SMICounter Textual Convention: RFC1155-SMICounter Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.272.4.16.14.1.17 |
||||||||
|
atmOamStatTotalRdiTxCells
mandatory
The totoal number of OAM remote defect indication (RDI) cells
that have been transmitted. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.272.4.16.14.1.18 |
||||||||
|
atmOamStatTotalRdiRxCells
mandatory
The total number of OAM remote defect indication (RDI) cells
that have been received. |
RFC1155-SMICounter Textual Convention: RFC1155-SMICounter Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.272.4.16.14.1.19 |
||||||||
|
atmOamStatCCActivatorState
mandatory
The status of the initiated CC negotiation, inactive(1)
is the initial status, wait-act-con(2) is set after sending an CC activation request, active(3) is reached after receiving the CC activation confirmation whereas w… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.272.4.16.14.1.20 |
||||||||
|
atmOamStatCCActivatorDirection
mandatory
The direction of action indicated by a received CC activation
confirmation, source(1) correlates with 'A-B', sink(2) with 'B-A' and both(3) with 'A-B' and 'B-A'. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.272.4.16.14.1.21 |
||||||||
|
atmOamStatCCActivatorCorr
mandatory
The correlation of the last CC activation message sent
to the responder. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.272.4.16.14.1.22 |
||||||||
|
atmOamStatCCResponderState
mandatory
The status of the passive CC negotiation, inactive(1)
is the initial status, active(3) is reached after receiving an CC activation request whereas wait-deact-con(4) is used to indicate awaiting the CC deactivation confi… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.272.4.16.14.1.23 |
||||||||
|
atmOamStatCCResponderDirection
mandatory
The direction of action indicated by a received CC activation
request, source(1) correlates with 'B-A', sink(2) with 'A-B' and both(3) with 'A-B' and 'B-A'. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.272.4.16.14.1.24 |
||||||||
|
atmOamStatCCResponderCorr
mandatory
The correlation of the received CC activation message.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.272.4.16.14.1.25 |
||||||||
|
atmOamStatCCTxCells
mandatory
The number of OAM continuity check cells
that have been sent to the target in this sequence. |
RFC1155-SMICounter Textual Convention: RFC1155-SMICounter Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.272.4.16.14.1.26 |
||||||||
|
atmOamStatCCRxCells
mandatory
The number of OAM continuity check cells
that have been received from the target in this sequence. |
RFC1155-SMICounter Textual Convention: RFC1155-SMICounter Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.272.4.16.14.1.27 |
.1.3.6.1.4.1.272.4.16.15
·
1 row entry
·
7 columns
The ethoaPvcTable displays all virtual ethernets defined for a VCI/VPI on a specified hardware.
Indexes
ethoaPvcVpi ethoaPvcVci ethoaPvcAtmIfIndex
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
ethoaPvcIfIndex
mandatory
This object contains an interface index and assigns the
row to an entry in ifTable. When creating new entries in the table, the value of this object shall be set to 0. The next free ifIndex value is than allocated and a… |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.272.4.16.15.1.1 |
||||||||
|
ethoaPvcDescr
mandatory
Short description of the configured PVC
|
r/w | .1.3.6.1.4.1.272.4.16.15.1.2 |
||||||||
|
ethoaPvcAtmIfIndex
mandatory
The Index to the ATM hardware.
|
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.272.4.16.15.1.3 |
||||||||
|
ethoaPvcVpi
mandatory
The VPI value of this Virtual Path Connection.
|
Integer32r/w Constraints: range: 0-255 |
.1.3.6.1.4.1.272.4.16.15.1.4 |
||||||||
|
ethoaPvcVci
mandatory
The VCI value of this Virtual Channel Connection.
|
Integer32r/w Constraints: range: 0-65535 |
.1.3.6.1.4.1.272.4.16.15.1.5 |
||||||||
|
ethoaPvcEncapsulation
mandatory
This values decides whether frames are send without FCS(1),
with FCS(2) or wether VC multiplexing is used. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.272.4.16.15.1.6 |
||||||||
|
ethoaPvcPhysAddress
mandatory
The MAC-Address used for the virtual interface.
|
RFC1213-MIBPhysAddressr/w Textual Convention: RFC1213-MIBPhysAddress OctetString |
.1.3.6.1.4.1.272.4.16.15.1.7 |
.1.3.6.1.4.1.272.4.16.16
·
1 row entry
·
6 columns
This table configures Vpi/Vci for raw protocols (IP, IPX, etc.)
Indexes
rpoaPvcVpi rpoaPvcVci rpoaPvcAtmIfIndex
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
rpoaPvcIfIndex
mandatory
This object contains an interface index and assigns the
row to an entry in ifTable. When creating new entries in the table, the value of this object shall be set to 0. The next free ifIndex value is than allocated and a… |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.272.4.16.16.1.1 |
||||||||
|
rpoaPvcDescr
mandatory
Short description of the configured PVC
|
r/w | .1.3.6.1.4.1.272.4.16.16.1.2 |
||||||||
|
rpoaPvcAtmIfIndex
mandatory
The Index to the ATM hardware.
|
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.272.4.16.16.1.3 |
||||||||
|
rpoaPvcVpi
mandatory
The VPI value of this Virtual Path Connection.
|
Integer32r/w Constraints: range: 0-255 |
.1.3.6.1.4.1.272.4.16.16.1.4 |
||||||||
|
rpoaPvcVci
mandatory
The VCI value of this Virtual Channel Connection.
|
Integer32r/w Constraints: range: 0-65535 |
.1.3.6.1.4.1.272.4.16.16.1.5 |
||||||||
|
rpoaPvcEncapsulation
mandatory
This values decides whether frames are send codes
with LLC 0xAA 0xAA (non-ISO), LLC 0xFE 0xFE (ISO) or wether VC multiplexing is used. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.272.4.16.16.1.6 |
.1.3.6.1.4.1.272.4.16.17
·
1 row entry
·
7 columns
This table configures Vpi/Vci for PPP oaver AAL5 (PPPoA) permanent and on-demand sessions.
Indexes
pppoaPvcVpi pppoaPvcVci pppoaPvcAtmIfIndex
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
pppoaPvcIfIndex
mandatory
This object contains an interface index and refers to an
entry in ifTable. When creating new entries in the table, the next free ifIndex value is than allocated and assigned to the object. At the same time a new interfa… |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.272.4.16.17.1.1 |
||||||
|
pppoaPvcDescr
mandatory
Short description of the configured PVC
|
r/w | .1.3.6.1.4.1.272.4.16.17.1.2 |
||||||
|
pppoaPvcAtmIfIndex
mandatory
The Index to the ATM hardware.
|
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.272.4.16.17.1.3 |
||||||
|
pppoaPvcVpi
mandatory
The VPI value of this Virtual Path Connection.
|
Integer32r/w Constraints: range: 0-255 |
.1.3.6.1.4.1.272.4.16.17.1.4 |
||||||
|
pppoaPvcVci
mandatory
The VCI value of this Virtual Channel Connection.
|
Integer32r/w Constraints: range: 0-65535 |
.1.3.6.1.4.1.272.4.16.17.1.5 |
||||||
|
pppoaPvcEncapsulation
mandatory
This value decides whether VC multiplexing or
LLC encapsulation is used. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.272.4.16.17.1.6 |
||||||
|
pppoaPvcClientType
mandatory
This variable defines whether the PPP over AAL5 session
will be established permanent(1) or initiated on-demand(2). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.272.4.16.17.1.7 |
.1.3.6.1.4.1.272.4.16.19
·
1 row entry
·
8 columns
This table provides QoS information for each active ATM VC on the related ATM interface
An entry in the table, containing ATM QoS parameters about a
particular virtual connection.
particular virtual connection.
Indexes
atmQosVccAtmIfIndex atmQosVccVpi atmQosVccVci
| Column | Syntax | OID | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
atmQosVccAtmIfIndex
mandatory
The interface index of the associated ATM hardware.
|
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.272.4.16.19.1.1 |
||||||||||
|
atmQosVccVpi
mandatory
The VPI value of this Virtual Channel Connection.
|
Integer32r/w Constraints: range: 0-255 |
.1.3.6.1.4.1.272.4.16.19.1.2 |
||||||||||
|
atmQosVccVci
mandatory
The VCI value of this Virtual Channel Connection.
|
Integer32r/w Constraints: range: 0-65535 |
.1.3.6.1.4.1.272.4.16.19.1.3 |
||||||||||
|
atmQosVccService
mandatory
The ATM service category of this virtual circuit connection:
cbr vbr vbr2 vbr3 VBR1 + Best Effort vbr-rt real-time vbr2-rt real-time vbr3-rt real-time ubr Best Effort ubr2 Best Effort abr delete |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.272.4.16.19.1.4 |
||||||||||
|
atmQosVccOutPcr
mandatory
Output Peak Cell Rate (PCR) in bps.
|
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.272.4.16.19.1.5 |
||||||||||
|
atmQosVccOutScr
mandatory
Output Sustained Cell Rate (SCR) in bps.
|
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.272.4.16.19.1.6 |
||||||||||
|
atmQosVccOutMbs
mandatory
Output Maximum Burst Size (MBS) in Bytes, only for
atmQosVccService vbr-rt(2) and vbr-nrt(3) (ATM service service category VBR). |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.272.4.16.19.1.7 |
||||||||||
|
atmQosVccOutMcr
mandatory
Output Minimum Cell Rate (MCR) in bps for connection with
vbr-nrt(3). |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.272.4.16.19.1.8 |
.1.3.6.1.4.1.272.4.16.20
·
1 row entry
·
19 columns
An entry in atmAturPerfDataTable.
Indexes
atmAturPerfIfIndex
| Column | Syntax | OID |
|---|---|---|
|
atmAturPerfIfIndex
mandatory
Specifies the ATM interface index.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.272.4.16.20.1.1 |
|
atmAturPerfIdleCells
mandatory
The number of ATM idle cells.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.272.4.16.20.1.2 |
|
atmAturPerfDataCells
mandatory
The number of ATM data cells.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.272.4.16.20.1.3 |
|
atmAturPerfLcds
mandatory
Count of the number of Loss of Cell Delineation failures since
agent reset. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.272.4.16.20.1.4 |
|
atmAturPerfHecs
mandatory
Count of the number of Header Error Check failures since
agent reset. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.272.4.16.20.1.5 |
|
atmAturPerfCurr15MinTimeElapsed
mandatory
Total elapsed seconds in this interval.
|
Integer32 Constraints: range: 0-899 |
.1.3.6.1.4.1.272.4.16.20.1.11 |
|
atmAturPerfCurr15MinIdleCells
mandatory
The number of ATM idle cells in the mandatory 15 minute interval.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.272.4.16.20.1.12 |
|
atmAturPerfCurr15MinDataCells
mandatory
The number of ATM data cells in the mandatory 15 minute interval.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.272.4.16.20.1.13 |
|
atmAturPerfCurr15MinLcds
mandatory
Count of seconds in the mandatory 15 minute interval
when there was Loss of Cell Delineation. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.272.4.16.20.1.14 |
|
atmAturPerfCurr15MinHecs
mandatory
Count of seconds in the mandatory 15 minute interval
when there was Header Error Check failures. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.272.4.16.20.1.15 |
|
atmAturPerfCurr1DayTimeElapsed
mandatory
Number of seconds that have elapsed since the
beginning of the mandatory 1-day interval. |
Integer32 Constraints: range: 0-86399 |
.1.3.6.1.4.1.272.4.16.20.1.18 |
|
atmAturPerfCurr1DayIdleCells
mandatory
The number of ATM idle cells during the mandatory day as measured
by atmAturPerfCurr1DayTimeElapsed. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.272.4.16.20.1.19 |
|
atmAturPerfCurr1DayDataCells
mandatory
The number of ATM data cells during the mandatory day as measured
by atmAturPerfCurr1DayTimeElapsed. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.272.4.16.20.1.20 |
|
atmAturPerfCurr1DayLcds
mandatory
Count of the number of seconds when there was Loss
of Cell Delineation during the mandatory day as measured by atmAturPerfCurr1DayTimeElapsed. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.272.4.16.20.1.21 |
|
atmAturPerfCurr1DayHecs
mandatory
Count of the number of seconds when there was Header
Error Check failures during the mandatory day as measured by atmAturPerfCurr1DayTimeElapsed. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.272.4.16.20.1.22 |
|
atmAturPerfPrev1DayIdleCells
mandatory
The number of ATM idle cells within the most recent previous
1-day period. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.272.4.16.20.1.26 |
|
atmAturPerfPrev1DayDataCells
mandatory
The number of ATM data cells within the most recent previous
1-day period. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.272.4.16.20.1.27 |
|
atmAturPerfPrev1DayLcds
mandatory
Count of seconds in the interval when there was
Loss of Cell Delineation within the most recent previous 1-day period. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.272.4.16.20.1.28 |
|
atmAturPerfPrev1DayHecs
mandatory
Count of seconds in the interval when there was
Header Error Check within the most recent previous 1-day period. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.272.4.16.20.1.29 |
.1.3.6.1.4.1.272.4.16.21
·
1 row entry
·
19 columns
An entry in atmAtucPerfDataTable.
Indexes
atmAtucPerfIfIndex
| Column | Syntax | OID |
|---|---|---|
|
atmAtucPerfIfIndex
mandatory
Specifies the ATM interface index.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.272.4.16.21.1.1 |
|
atmAtucPerfIdleCells
mandatory
The number of ATM idle cells.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.272.4.16.21.1.2 |
|
atmAtucPerfDataCells
mandatory
The number of ATM data cells.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.272.4.16.21.1.3 |
|
atmAtucPerfLcds
mandatory
Count of the number of Loss of Cell Delineation failures since
agent reset. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.272.4.16.21.1.4 |
|
atmAtucPerfHecs
mandatory
Count of the number of Header Error Check failures since
agent reset. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.272.4.16.21.1.5 |
|
atmAtucPerfCurr15MinTimeElapsed
mandatory
Total elapsed seconds in this interval.
|
Integer32 Constraints: range: 0-899 |
.1.3.6.1.4.1.272.4.16.21.1.11 |
|
atmAtucPerfCurr15MinIdleCells
mandatory
The number of ATM idle cells in the mandatory 15 minute interval.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.272.4.16.21.1.12 |
|
atmAtucPerfCurr15MinDataCells
mandatory
The number of ATM data cells in the mandatory 15 minute interval.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.272.4.16.21.1.13 |
|
atmAtucPerfCurr15MinLcds
mandatory
Count of seconds in the mandatory 15 minute interval
when there was Loss of Cell Delineation. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.272.4.16.21.1.14 |
|
atmAtucPerfCurr15MinHecs
mandatory
Count of seconds in the mandatory 15 minute interval
when there was Header Error Check failures. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.272.4.16.21.1.15 |
|
atmAtucPerfCurr1DayTimeElapsed
mandatory
Number of seconds that have elapsed since the
beginning of the mandatory 1-day interval. |
Integer32 Constraints: range: 0-86399 |
.1.3.6.1.4.1.272.4.16.21.1.18 |
|
atmAtucPerfCurr1DayIdleCells
mandatory
The number of ATM idle cells during the mandatory day as measured
by atmAtucPerfCurr1DayTimeElapsed. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.272.4.16.21.1.19 |
|
atmAtucPerfCurr1DayDataCells
mandatory
The number of ATM data cells during the mandatory day as measured
by atmAtucPerfCurr1DayTimeElapsed. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.272.4.16.21.1.20 |
|
atmAtucPerfCurr1DayLcds
mandatory
Count of the number of seconds when there was Loss
of Cell Delineation during the mandatory day as measured by atmAtucPerfCurr1DayTimeElapsed. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.272.4.16.21.1.21 |
|
atmAtucPerfCurr1DayHecs
mandatory
Count of the number of seconds when there was Header
Error Check failures during the mandatory day as measured by atmAtucPerfCurr1DayTimeElapsed. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.272.4.16.21.1.22 |
|
atmAtucPerfPrev1DayIdleCells
mandatory
The number of ATM idle cells within the most recent previous
1-day period. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.272.4.16.21.1.26 |
|
atmAtucPerfPrev1DayDataCells
mandatory
The number of ATM data cells within the most recent previous
1-day period. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.272.4.16.21.1.27 |
|
atmAtucPerfPrev1DayLcds
mandatory
Count of seconds in the interval when there was
Loss of Cell Delineation within the most recent previous 1-day period. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.272.4.16.21.1.28 |
|
atmAtucPerfPrev1DayHecs
mandatory
Count of seconds in the interval when there was
Header Error Check within the most recent previous 1-day period. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.272.4.16.21.1.29 |