atmIfMaxTxRate
BIANCA-BRICK-ATM2-MIB ·
.1.3.6.1.4.1.272.4.16.10.1.7
Object
column
mandatory
r/w
Integer32
This object enables traffic shaping on the related ATM interface. If set to zero (0) there is no shaping active. Otherwise this variable defines the maximum amount of bits per second to be transmitted. Note that the maximum transmit rate is also determined by the capabilities of the ATM hardware.
Context
- MIB
- BIANCA-BRICK-ATM2-MIB
- OID
.1.3.6.1.4.1.272.4.16.10.1.7- Type
- column
- Access
- readwrite
- Status
- mandatory
- Parent
- atmIfEntry
- Table
- atmIfTable
- Siblings
- 17
Syntax
Integer32
- Source
- COPS-PR-SPPIInteger32
- Base type
Integer32
Values & Constraints
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| atmIfIndex mandatory The interface index of the associated ATM hardware. | column | Integer32 | .1.3.6.1.4.1.272.4.16.10.1.1 |
| atmIfType mandatory This object contains an interface type. | column | Enumeration | .1.3.6.1.4.1.272.4.16.10.1.2 |
| atmIfInPkts mandatory The number of reassembled received packets. | column | Integer32 | .1.3.6.1.4.1.272.4.16.10.1.22 |
| atmIfOutPkts mandatory This number of transmitted packets. | column | Integer32 | .1.3.6.1.4.1.272.4.16.10.1.23 |
| atmIfRxSpeed mandatory This object contains the receive interface speed. | column | Integer32 | .1.3.6.1.4.1.272.4.16.10.1.24 |
| atmIfTxSpeed mandatory This object contains the transmit interface speed. | column | Integer32 | .1.3.6.1.4.1.272.4.16.10.1.25 |
| atmIfInOctets mandatory The total number of octets received on the interface,
including framing characters. | column | RFC1155-SMICounter | .1.3.6.1.4.1.272.4.16.10.1.26 |
| atmIfInDiscards mandatory The number of inbound packets which were chosen to be
discarded even though no errors had been detected to prevent
their being deliverable to a higher-layer protocol. One
possible… | column | RFC1155-SMICounter | .1.3.6.1.4.1.272.4.16.10.1.27 |
| atmIfInErrors mandatory The number of inbound packets that contained errors preventing
them from being deliverable to a higher-layer protocol. | column | RFC1155-SMICounter | .1.3.6.1.4.1.272.4.16.10.1.28 |
| atmIfOutOctets mandatory The total number of octets transmitted out of the interface,
including framing characters. | column | RFC1155-SMICounter | .1.3.6.1.4.1.272.4.16.10.1.29 |
| atmIfDescr mandatory Short description for this object. | column | - | .1.3.6.1.4.1.272.4.16.10.1.3 |
| atmIfOutDiscards mandatory The number of outbound packets which were chosen to be
discarded even though no errors had been detected to prevent
their being transmitted. One possible reason for discarding
su… | column | RFC1155-SMICounter | .1.3.6.1.4.1.272.4.16.10.1.30 |
| atmIfOutErrors mandatory The number of outbound packets that could not be transmitted
because of errors. | column | RFC1155-SMICounter | .1.3.6.1.4.1.272.4.16.10.1.31 |
| atmIfAdminStatus mandatory This object contains the desired state of the ATM interface. | column | Enumeration | .1.3.6.1.4.1.272.4.16.10.1.4 |
| atmIfOperStatus mandatory The current operational state of the ATM interface. | column | Enumeration | .1.3.6.1.4.1.272.4.16.10.1.5 |
| atmIfLastChange mandatory The value of sysUpTime at the time the interface entered
its current operational state. If the current state was
entered prior to the last re-initialization of the local
network m… | column | RFC1155-SMITimeTicks | .1.3.6.1.4.1.272.4.16.10.1.6 |
| atmIfOperMode mandatory The current operational mode of the ATM interface.
The value atm(1) means ATM is used on the line.
The value efm(2) means ATM is used only internally
and Ethernet with HDLC framin… | column | Enumeration | .1.3.6.1.4.1.272.4.16.10.1.8 |